From: Tudor Ambarus <tudor.ambarus@microchip.com>
To: <p.yadav@ti.com>, <michael@walle.cc>
Cc: <miquel.raynal@bootlin.com>, <richard@nod.at>, <vigneshr@ti.com>,
<linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
<nicolas.ferre@microchip.com>, <zhengxunli@mxic.com.tw>,
<jaimeliao@mxic.com.tw>,
Tudor Ambarus <tudor.ambarus@microchip.com>
Subject: [PATCH v6 2/7] mtd: spi-nor: Introduce spi_nor_match_id()
Date: Wed, 9 Feb 2022 15:36:51 +0200 [thread overview]
Message-ID: <20220209133656.374903-3-tudor.ambarus@microchip.com> (raw)
In-Reply-To: <20220209133656.374903-1-tudor.ambarus@microchip.com>
Similar to spi_nor_match_name() extend the search of flash_info through
all the manufacturers, this time doing the match by ID. There's no reason
to limit the search per manufacturer yet, do it globally, search the flash
in all the parts of all manufacturers in a single method.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
drivers/mtd/spi-nor/core.c | 40 ++++++++++++++++++--------------------
1 file changed, 19 insertions(+), 21 deletions(-)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 345f9da96fab..335170fc2438 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -1848,16 +1848,21 @@ static const struct spi_nor_manufacturer *manufacturers[] = {
&spi_nor_xmc,
};
-static const struct flash_info *
-spi_nor_search_part_by_id(const struct flash_info *parts, unsigned int nparts,
- const u8 *id)
+static const struct flash_info *spi_nor_match_id(struct spi_nor *nor,
+ const u8 *id)
{
- unsigned int i;
+ const struct flash_info *part;
+ unsigned int i, j;
- for (i = 0; i < nparts; i++) {
- if (parts[i].id_len &&
- !memcmp(parts[i].id, id, parts[i].id_len))
- return &parts[i];
+ for (i = 0; i < ARRAY_SIZE(manufacturers); i++) {
+ for (j = 0; j < manufacturers[i]->nparts; j++) {
+ part = &manufacturers[i]->parts[j];
+ if (part->id_len &&
+ !memcmp(part->id, id, part->id_len)) {
+ nor->manufacturer = manufacturers[i];
+ return part;
+ }
+ }
}
return NULL;
@@ -1867,7 +1872,6 @@ static const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
{
const struct flash_info *info;
u8 *id = nor->bouncebuf;
- unsigned int i;
int ret;
if (nor->spimem) {
@@ -1887,19 +1891,13 @@ static const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
return ERR_PTR(ret);
}
- for (i = 0; i < ARRAY_SIZE(manufacturers); i++) {
- info = spi_nor_search_part_by_id(manufacturers[i]->parts,
- manufacturers[i]->nparts,
- id);
- if (info) {
- nor->manufacturer = manufacturers[i];
- return info;
- }
+ info = spi_nor_match_id(nor, id);
+ if (!info) {
+ dev_err(nor->dev, "unrecognized JEDEC id bytes: %*ph\n",
+ SPI_NOR_MAX_ID_LEN, id);
+ return ERR_PTR(-ENODEV);
}
-
- dev_err(nor->dev, "unrecognized JEDEC id bytes: %*ph\n",
- SPI_NOR_MAX_ID_LEN, id);
- return ERR_PTR(-ENODEV);
+ return info;
}
static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len,
--
2.25.1
next prev parent reply other threads:[~2022-02-09 13:38 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-09 13:36 [PATCH v6 0/7] mtd: spi-nor: Prepare core and add support for mx66lm1g45g Tudor Ambarus
2022-02-09 13:36 ` [PATCH v6 1/7] mtd: spi-nor: Rename method, s/spi_nor_match_id/spi_nor_match_name Tudor Ambarus
2022-03-21 11:53 ` Pratyush Yadav
2022-03-21 11:55 ` Pratyush Yadav
2022-02-09 13:36 ` Tudor Ambarus [this message]
2022-02-09 13:36 ` [PATCH v6 3/7] mtd: spi-nor: core: Use auto-detection only once Tudor Ambarus
2022-02-09 13:36 ` [PATCH v6 4/7] mtd: spi-nor: core: Introduce method for RDID op Tudor Ambarus
2022-02-09 13:36 ` [PATCH v6 5/7] mtd: spi-nor: manufacturers: Use spi_nor_read_id() core method Tudor Ambarus
2022-02-09 13:36 ` [PATCH v6 6/7] mtd: spi-nor: core: Introduce SPI_NOR_SOFT_RESET flash_info fixup_flag Tudor Ambarus
2022-02-09 13:36 ` [PATCH v6 7/7] mtd: spi-nor: macronix: Add support for mx66lm1g45g Tudor Ambarus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220209133656.374903-3-tudor.ambarus@microchip.com \
--to=tudor.ambarus@microchip.com \
--cc=jaimeliao@mxic.com.tw \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=michael@walle.cc \
--cc=miquel.raynal@bootlin.com \
--cc=nicolas.ferre@microchip.com \
--cc=p.yadav@ti.com \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
--cc=zhengxunli@mxic.com.tw \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®