[PATCH v10 18/18] arm64: dts: allwinner: h616: X96 Mate: Add USB nodes

[Andre Przywara <andre.przywara@arm.com>]

The X96 Mate TV box has two USB-A ports, VBUS is always on and connected
to the DC input.
Since USB port 0 is connected to an USB-A receptable, we configure it
as a host port. Using it as a peripheral is dangerous, because VBUS is
always on.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 .../dts/allwinner/sun50i-h616-x96-mate.dts    | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
index aedb3a3dff38..5c3586717c00 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
@@ -32,6 +32,14 @@ reg_vcc5v: vcc5v {
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
 &ir {
 	status = "okay";
 };
@@ -54,6 +62,14 @@ &mmc2 {
 	status = "okay";
 };
 
+&ohci0 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
 &r_rsb {
 	status = "okay";
 
@@ -175,3 +191,12 @@ &uart0 {
 	pinctrl-0 = <&uart0_ph_pins>;
 	status = "okay";
 };
+
+&usbotg {
+	dr_mode = "host";	/* USB A type receptable */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
-- 
2.25.1