From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: kvm@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>,
Sean Christopherson <seanjc@google.com>
Cc: Anirudh Rayabharam <anrayabh@linux.microsoft.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>,
Maxim Levitsky <mlevitsk@redhat.com>,
linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 12/28] KVM: VMX: Enable VM_{EXIT,ENTRY}_LOAD_IA32_PERF_GLOBAL_CTRL for KVM on Hyper-V
Date: Wed, 29 Jun 2022 17:06:09 +0200 [thread overview]
Message-ID: <20220629150625.238286-13-vkuznets@redhat.com> (raw)
In-Reply-To: <20220629150625.238286-1-vkuznets@redhat.com>
The updated Enlightened VMCS v1 specification gained
{guest,host}_ia32_perf_global_ctrl fields so there's no need to filter
VM_{EXIT,ENTRY}_LOAD_IA32_PERF_GLOBAL_CTRL out. Unfortunately, enabling
these controls for Hyper-V on KVM results in boot time crashes and the
exact reason is not clear yet. It is, however, possible to enable the
feature for KVM on Hyper-V as it seems to work.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
---
arch/x86/kvm/vmx/evmcs.c | 10 ++++++++--
arch/x86/kvm/vmx/evmcs.h | 5 ++---
2 files changed, 10 insertions(+), 5 deletions(-)
diff --git a/arch/x86/kvm/vmx/evmcs.c b/arch/x86/kvm/vmx/evmcs.c
index 4fe65b6a9a92..697590cf5b10 100644
--- a/arch/x86/kvm/vmx/evmcs.c
+++ b/arch/x86/kvm/vmx/evmcs.c
@@ -384,11 +384,17 @@ static u32 evmcs_get_unsupported_ctls(struct kvm_vcpu *vcpu,
if (!evmcs_rev)
return 0;
+ /*
+ * While GUEST_IA32_PERF_GLOBAL_CTRL and HOST_IA32_PERF_GLOBAL_CTRL
+ * are present in eVMCSv1, Windows 11 still has issues booting when
+ * VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL/VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL
+ * are exposed to it, keep them filtered out.
+ */
switch (ctrl_type) {
case EVMCS_EXIT_CTLS:
- return EVMCS1_UNSUPPORTED_VMEXIT_CTRL;
+ return EVMCS1_UNSUPPORTED_VMEXIT_CTRL | VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL;
case EVMCS_ENTRY_CTLS:
- return EVMCS1_UNSUPPORTED_VMENTRY_CTRL;
+ return EVMCS1_UNSUPPORTED_VMENTRY_CTRL | VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL;
case EVMCS_2NDEXEC:
if (evmcs_rev == 1)
return EVMCS1_UNSUPPORTED_2NDEXEC | SECONDARY_EXEC_TSC_SCALING;
diff --git a/arch/x86/kvm/vmx/evmcs.h b/arch/x86/kvm/vmx/evmcs.h
index 2992e29b81b7..c9090ac39740 100644
--- a/arch/x86/kvm/vmx/evmcs.h
+++ b/arch/x86/kvm/vmx/evmcs.h
@@ -68,9 +68,8 @@ DECLARE_STATIC_KEY_FALSE(enable_evmcs);
SECONDARY_EXEC_SHADOW_VMCS | \
SECONDARY_EXEC_PAUSE_LOOP_EXITING)
#define EVMCS1_UNSUPPORTED_VMEXIT_CTRL \
- (VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL | \
- VM_EXIT_SAVE_VMX_PREEMPTION_TIMER)
-#define EVMCS1_UNSUPPORTED_VMENTRY_CTRL (VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL)
+ (VM_EXIT_SAVE_VMX_PREEMPTION_TIMER)
+#define EVMCS1_UNSUPPORTED_VMENTRY_CTRL (0)
#define EVMCS1_UNSUPPORTED_VMFUNC (VMX_VMFUNC_EPTP_SWITCHING)
struct evmcs_field {
--
2.35.3
next prev parent reply other threads:[~2022-06-29 15:07 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-29 15:05 [PATCH v2 00/28] KVM: VMX: Support TscScaling and EnclsExitingBitmap with eVMCS + use vmcs_config for L1 VMX MSRs Vitaly Kuznetsov
2022-06-29 15:05 ` [PATCH v2 01/28] KVM: x86: hyper-v: Expose access to debug MSRs in the partition privilege flags Vitaly Kuznetsov
2022-06-29 15:05 ` [PATCH v2 02/28] x86/hyperv: Fix 'struct hv_enlightened_vmcs' definition Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 03/28] x86/hyperv: Update " Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 04/28] KVM: VMX: Define VMCS-to-EVMCS conversion for the new fields Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 05/28] KVM: nVMX: Support several new fields in eVMCSv1 Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 06/28] KVM: nVMX: Introduce KVM_CAP_HYPERV_ENLIGHTENED_VMCS2 Vitaly Kuznetsov
2022-07-06 21:35 ` Sean Christopherson
2022-07-07 9:58 ` Vitaly Kuznetsov
2022-07-07 16:17 ` Sean Christopherson
2022-07-07 16:40 ` Sean Christopherson
2022-06-29 15:06 ` [PATCH v2 07/28] KVM: selftests: Switch to KVM_CAP_HYPERV_ENLIGHTENED_VMCS2 Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 08/28] KVM: VMX: Support TSC scaling with enlightened VMCS Vitaly Kuznetsov
2022-07-07 10:01 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 09/28] KVM: selftests: Add ENCLS_EXITING_BITMAP{,HIGH} VMCS fields Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 10/28] KVM: selftests: Switch to updated eVMCSv1 definition Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 11/28] KVM: selftests: Enable TSC scaling in evmcs selftest Vitaly Kuznetsov
2022-06-29 15:06 ` Vitaly Kuznetsov [this message]
2022-06-29 15:06 ` [PATCH v2 13/28] KVM: VMX: Get rid of eVMCS specific VMX controls sanitization Vitaly Kuznetsov
2022-07-06 22:27 ` Sean Christopherson
2022-07-07 10:03 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 14/28] KVM: VMX: Check VM_ENTRY_IA32E_MODE in setup_vmcs_config() Vitaly Kuznetsov
2022-06-29 20:28 ` Jim Mattson
2022-06-29 15:06 ` [PATCH v2 15/28] KVM: VMX: Check CPU_BASED_{INTR,NMI}_WINDOW_EXITING " Vitaly Kuznetsov
2022-07-01 3:58 ` Jim Mattson
2022-07-01 8:12 ` Vitaly Kuznetsov
2022-07-06 18:44 ` Sean Christopherson
2022-06-29 15:06 ` [PATCH v2 16/28] KVM: VMX: Tweak the special handling of SECONDARY_EXEC_ENCLS_EXITING " Vitaly Kuznetsov
2022-06-29 18:56 ` Jim Mattson
2022-06-30 7:32 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 17/28] KVM: VMX: Extend VMX controls macro shenanigans Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 18/28] KVM: VMX: Move CPU_BASED_CR8_{LOAD,STORE}_EXITING filtering out of setup_vmcs_config() Vitaly Kuznetsov
2022-07-01 4:14 ` Jim Mattson
2022-06-29 15:06 ` [PATCH v2 19/28] KVM: VMX: Add missing VMEXIT controls to vmcs_config Vitaly Kuznetsov
2022-07-01 16:02 ` Jim Mattson
2022-06-29 15:06 ` [PATCH v2 20/28] KVM: VMX: Add missing VMENTRY " Vitaly Kuznetsov
2022-07-01 16:01 ` Jim Mattson
2022-07-07 10:41 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 21/28] KVM: VMX: Add missing CPU based VM execution " Vitaly Kuznetsov
2022-07-01 16:05 ` Jim Mattson
2022-06-29 15:06 ` [PATCH v2 22/28] KVM: VMX: Clear controls obsoleted by EPT at runtime, not setup Vitaly Kuznetsov
2022-07-01 16:11 ` Jim Mattson
2022-07-07 14:57 ` Vitaly Kuznetsov
2022-07-07 19:30 ` Sean Christopherson
2022-07-07 21:32 ` Jim Mattson
2022-07-07 21:39 ` Sean Christopherson
2022-07-07 23:12 ` Jim Mattson
2022-07-08 7:55 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 23/28] KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config() Vitaly Kuznetsov
2022-07-01 16:26 ` Jim Mattson
2022-07-07 12:07 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 24/28] KVM: nVMX: Use sanitized allowed-1 bits for VMX control MSRs Vitaly Kuznetsov
2022-07-01 22:54 ` Jim Mattson
2022-07-07 12:30 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 25/28] KVM: VMX: Store required-1 VMX controls in vmcs_config Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 26/28] KVM: nVMX: Use sanitized required-1 bits for VMX control MSRs Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 27/28] KVM: VMX: Cache MSR_IA32_VMX_MISC in vmcs_config Vitaly Kuznetsov
2022-06-29 18:33 ` Jim Mattson
2022-06-29 15:06 ` [PATCH v2 28/28] KVM: nVMX: Use cached host MSR_IA32_VMX_MISC value for setting up nested MSR Vitaly Kuznetsov
2022-06-29 18:37 ` Jim Mattson
2022-06-30 7:36 ` Vitaly Kuznetsov
2022-06-30 12:27 ` Jim Mattson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220629150625.238286-13-vkuznets@redhat.com \
--to=vkuznets@redhat.com \
--cc=anrayabh@linux.microsoft.com \
--cc=jmattson@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mlevitsk@redhat.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®