mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: kvm@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>,
	Sean Christopherson <seanjc@google.com>
Cc: Anirudh Rayabharam <anrayabh@linux.microsoft.com>,
	Wanpeng Li <wanpengli@tencent.com>,
	Jim Mattson <jmattson@google.com>,
	Maxim Levitsky <mlevitsk@redhat.com>,
	linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 25/28] KVM: VMX: Store required-1 VMX controls in vmcs_config
Date: Wed, 29 Jun 2022 17:06:22 +0200	[thread overview]
Message-ID: <20220629150625.238286-26-vkuznets@redhat.com> (raw)
In-Reply-To: <20220629150625.238286-1-vkuznets@redhat.com>

While constructing nested VMX MSRs values, nested_vmx_setup_ctls_msrs()
has to re-read host VMX control MSRs to get required-1 bits which are not
stored anywhre. Add this missing information to vmcs_config.

No functional change intended.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
---
 arch/x86/kvm/vmx/capabilities.h |  5 +++++
 arch/x86/kvm/vmx/vmx.c          | 28 +++++++++++++++++++++-------
 2 files changed, 26 insertions(+), 7 deletions(-)

diff --git a/arch/x86/kvm/vmx/capabilities.h b/arch/x86/kvm/vmx/capabilities.h
index 069d8d298e1d..2e223440e7ed 100644
--- a/arch/x86/kvm/vmx/capabilities.h
+++ b/arch/x86/kvm/vmx/capabilities.h
@@ -60,11 +60,16 @@ struct vmcs_config {
 	u32 basic_cap;
 	u32 revision_id;
 	u32 pin_based_exec_ctrl;
+	u32 pin_based_exec_ctrl_req1;
 	u32 cpu_based_exec_ctrl;
+	u32 cpu_based_exec_ctrl_req1;
 	u32 cpu_based_2nd_exec_ctrl;
+	u32 cpu_based_2nd_exec_ctrl_req1;
 	u64 cpu_based_3rd_exec_ctrl;
 	u32 vmexit_ctrl;
+	u32 vmexit_ctrl_req1;
 	u32 vmentry_ctrl;
+	u32 vmentry_ctrl_req1;
 	struct nested_vmx_msrs nested;
 };
 extern struct vmcs_config vmcs_config;
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 5d4158b7421c..c195c159738d 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -2442,7 +2442,7 @@ static bool cpu_has_perf_global_ctrl_bug(void)
 
 
 static __init int adjust_vmx_controls(u32 ctl_min, u32 ctl_opt,
-				      u32 msr, u32 *result)
+				      u32 msr, u32 *result_high, u32 *result_low)
 {
 	u32 vmx_msr_low, vmx_msr_high;
 	u32 ctl = ctl_min | ctl_opt;
@@ -2456,7 +2456,8 @@ static __init int adjust_vmx_controls(u32 ctl_min, u32 ctl_opt,
 	if (ctl_min & ~ctl)
 		return -EIO;
 
-	*result = ctl;
+	*result_high = ctl;
+	*result_low = vmx_msr_low;
 	return 0;
 }
 
@@ -2479,6 +2480,11 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
 	u64 _cpu_based_3rd_exec_control = 0;
 	u32 _vmexit_control = 0;
 	u32 _vmentry_control = 0;
+	u32 _pin_based_exec_control_low = 0;
+	u32 _cpu_based_exec_control_low = 0;
+	u32 _cpu_based_2nd_exec_control_low = 0;
+	u32 _vmexit_control_low = 0;
+	u32 _vmentry_control_low = 0;
 	int i;
 
 	/*
@@ -2502,13 +2508,15 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
 	if (adjust_vmx_controls(KVM_REQ_VMX_CPU_BASED_VM_EXEC_CONTROL,
 				KVM_OPT_VMX_CPU_BASED_VM_EXEC_CONTROL,
 				MSR_IA32_VMX_PROCBASED_CTLS,
-				&_cpu_based_exec_control) < 0)
+				&_cpu_based_exec_control,
+				&_cpu_based_exec_control_low) < 0)
 		return -EIO;
 	if (_cpu_based_exec_control & CPU_BASED_ACTIVATE_SECONDARY_CONTROLS) {
 		if (adjust_vmx_controls(KVM_REQ_VMX_SECONDARY_VM_EXEC_CONTROL,
 					KVM_OPT_VMX_SECONDARY_VM_EXEC_CONTROL,
 					MSR_IA32_VMX_PROCBASED_CTLS2,
-					&_cpu_based_2nd_exec_control) < 0)
+					&_cpu_based_2nd_exec_control,
+					&_cpu_based_2nd_exec_control_low) < 0)
 			return -EIO;
 	}
 #ifndef CONFIG_X86_64
@@ -2559,13 +2567,14 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
 	if (adjust_vmx_controls(KVM_REQ_VMX_VM_EXIT_CONTROLS,
 				KVM_OPT_VMX_VM_EXIT_CONTROLS,
 				MSR_IA32_VMX_EXIT_CTLS,
-				&_vmexit_control) < 0)
+				&_vmexit_control, &_vmexit_control_low) < 0)
 		return -EIO;
 
 	if (adjust_vmx_controls(KVM_REQ_VMX_PIN_BASED_VM_EXEC_CONTROL,
 				KVM_OPT_VMX_PIN_BASED_VM_EXEC_CONTROL,
 				MSR_IA32_VMX_PINBASED_CTLS,
-				&_pin_based_exec_control) < 0)
+				&_pin_based_exec_control,
+				&_pin_based_exec_control_low) < 0)
 		return -EIO;
 
 	if (cpu_has_broken_vmx_preemption_timer())
@@ -2577,7 +2586,7 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
 	if (adjust_vmx_controls(KVM_REQ_VMX_VM_ENTRY_CONTROLS,
 				KVM_OPT_VMX_VM_ENTRY_CONTROLS,
 				MSR_IA32_VMX_ENTRY_CTLS,
-				&_vmentry_control) < 0)
+				&_vmentry_control, &_vmentry_control_low) < 0)
 		return -EIO;
 
 	for (i = 0; i < ARRAY_SIZE(vmcs_entry_exit_pairs); i++) {
@@ -2619,11 +2628,16 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
 	vmcs_conf->revision_id = vmx_msr_low;
 
 	vmcs_conf->pin_based_exec_ctrl = _pin_based_exec_control;
+	vmcs_conf->pin_based_exec_ctrl_req1 = _pin_based_exec_control_low;
 	vmcs_conf->cpu_based_exec_ctrl = _cpu_based_exec_control;
+	vmcs_conf->cpu_based_exec_ctrl_req1 = _cpu_based_exec_control_low;
 	vmcs_conf->cpu_based_2nd_exec_ctrl = _cpu_based_2nd_exec_control;
+	vmcs_conf->cpu_based_2nd_exec_ctrl_req1 = _cpu_based_2nd_exec_control_low;
 	vmcs_conf->cpu_based_3rd_exec_ctrl = _cpu_based_3rd_exec_control;
 	vmcs_conf->vmexit_ctrl         = _vmexit_control;
+	vmcs_conf->vmexit_ctrl_req1         = _vmexit_control_low;
 	vmcs_conf->vmentry_ctrl        = _vmentry_control;
+	vmcs_conf->vmentry_ctrl_req1        = _vmentry_control_low;
 
 	return 0;
 }
-- 
2.35.3


  parent reply	other threads:[~2022-06-29 15:09 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-29 15:05 [PATCH v2 00/28] KVM: VMX: Support TscScaling and EnclsExitingBitmap with eVMCS + use vmcs_config for L1 VMX MSRs Vitaly Kuznetsov
2022-06-29 15:05 ` [PATCH v2 01/28] KVM: x86: hyper-v: Expose access to debug MSRs in the partition privilege flags Vitaly Kuznetsov
2022-06-29 15:05 ` [PATCH v2 02/28] x86/hyperv: Fix 'struct hv_enlightened_vmcs' definition Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 03/28] x86/hyperv: Update " Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 04/28] KVM: VMX: Define VMCS-to-EVMCS conversion for the new fields Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 05/28] KVM: nVMX: Support several new fields in eVMCSv1 Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 06/28] KVM: nVMX: Introduce KVM_CAP_HYPERV_ENLIGHTENED_VMCS2 Vitaly Kuznetsov
2022-07-06 21:35   ` Sean Christopherson
2022-07-07  9:58     ` Vitaly Kuznetsov
2022-07-07 16:17       ` Sean Christopherson
2022-07-07 16:40         ` Sean Christopherson
2022-06-29 15:06 ` [PATCH v2 07/28] KVM: selftests: Switch to KVM_CAP_HYPERV_ENLIGHTENED_VMCS2 Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 08/28] KVM: VMX: Support TSC scaling with enlightened VMCS Vitaly Kuznetsov
2022-07-07 10:01   ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 09/28] KVM: selftests: Add ENCLS_EXITING_BITMAP{,HIGH} VMCS fields Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 10/28] KVM: selftests: Switch to updated eVMCSv1 definition Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 11/28] KVM: selftests: Enable TSC scaling in evmcs selftest Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 12/28] KVM: VMX: Enable VM_{EXIT,ENTRY}_LOAD_IA32_PERF_GLOBAL_CTRL for KVM on Hyper-V Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 13/28] KVM: VMX: Get rid of eVMCS specific VMX controls sanitization Vitaly Kuznetsov
2022-07-06 22:27   ` Sean Christopherson
2022-07-07 10:03     ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 14/28] KVM: VMX: Check VM_ENTRY_IA32E_MODE in setup_vmcs_config() Vitaly Kuznetsov
2022-06-29 20:28   ` Jim Mattson
2022-06-29 15:06 ` [PATCH v2 15/28] KVM: VMX: Check CPU_BASED_{INTR,NMI}_WINDOW_EXITING " Vitaly Kuznetsov
2022-07-01  3:58   ` Jim Mattson
2022-07-01  8:12     ` Vitaly Kuznetsov
2022-07-06 18:44   ` Sean Christopherson
2022-06-29 15:06 ` [PATCH v2 16/28] KVM: VMX: Tweak the special handling of SECONDARY_EXEC_ENCLS_EXITING " Vitaly Kuznetsov
2022-06-29 18:56   ` Jim Mattson
2022-06-30  7:32     ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 17/28] KVM: VMX: Extend VMX controls macro shenanigans Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 18/28] KVM: VMX: Move CPU_BASED_CR8_{LOAD,STORE}_EXITING filtering out of setup_vmcs_config() Vitaly Kuznetsov
2022-07-01  4:14   ` Jim Mattson
2022-06-29 15:06 ` [PATCH v2 19/28] KVM: VMX: Add missing VMEXIT controls to vmcs_config Vitaly Kuznetsov
2022-07-01 16:02   ` Jim Mattson
2022-06-29 15:06 ` [PATCH v2 20/28] KVM: VMX: Add missing VMENTRY " Vitaly Kuznetsov
2022-07-01 16:01   ` Jim Mattson
2022-07-07 10:41     ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 21/28] KVM: VMX: Add missing CPU based VM execution " Vitaly Kuznetsov
2022-07-01 16:05   ` Jim Mattson
2022-06-29 15:06 ` [PATCH v2 22/28] KVM: VMX: Clear controls obsoleted by EPT at runtime, not setup Vitaly Kuznetsov
2022-07-01 16:11   ` Jim Mattson
2022-07-07 14:57     ` Vitaly Kuznetsov
2022-07-07 19:30       ` Sean Christopherson
2022-07-07 21:32         ` Jim Mattson
2022-07-07 21:39           ` Sean Christopherson
2022-07-07 23:12             ` Jim Mattson
2022-07-08  7:55             ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 23/28] KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config() Vitaly Kuznetsov
2022-07-01 16:26   ` Jim Mattson
2022-07-07 12:07     ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 24/28] KVM: nVMX: Use sanitized allowed-1 bits for VMX control MSRs Vitaly Kuznetsov
2022-07-01 22:54   ` Jim Mattson
2022-07-07 12:30     ` Vitaly Kuznetsov
2022-06-29 15:06 ` Vitaly Kuznetsov [this message]
2022-06-29 15:06 ` [PATCH v2 26/28] KVM: nVMX: Use sanitized required-1 " Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 27/28] KVM: VMX: Cache MSR_IA32_VMX_MISC in vmcs_config Vitaly Kuznetsov
2022-06-29 18:33   ` Jim Mattson
2022-06-29 15:06 ` [PATCH v2 28/28] KVM: nVMX: Use cached host MSR_IA32_VMX_MISC value for setting up nested MSR Vitaly Kuznetsov
2022-06-29 18:37   ` Jim Mattson
2022-06-30  7:36     ` Vitaly Kuznetsov
2022-06-30 12:27       ` Jim Mattson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220629150625.238286-26-vkuznets@redhat.com \
    --to=vkuznets@redhat.com \
    --cc=anrayabh@linux.microsoft.com \
    --cc=jmattson@google.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-hyperv@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mlevitsk@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=seanjc@google.com \
    --cc=wanpengli@tencent.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®