From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: kvm@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>,
Sean Christopherson <seanjc@google.com>
Cc: Anirudh Rayabharam <anrayabh@linux.microsoft.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>,
Maxim Levitsky <mlevitsk@redhat.com>,
linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 27/28] KVM: VMX: Cache MSR_IA32_VMX_MISC in vmcs_config
Date: Wed, 29 Jun 2022 17:06:24 +0200 [thread overview]
Message-ID: <20220629150625.238286-28-vkuznets@redhat.com> (raw)
In-Reply-To: <20220629150625.238286-1-vkuznets@redhat.com>
Like other host VMX control MSRs, MSR_IA32_VMX_MISC can be cached in
vmcs_config to avoid the need to re-read it later, e.g. from
cpu_has_vmx_intel_pt() or cpu_has_vmx_shadow_vmcs().
No (real) functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
---
arch/x86/kvm/vmx/capabilities.h | 11 +++--------
arch/x86/kvm/vmx/vmx.c | 8 +++++---
2 files changed, 8 insertions(+), 11 deletions(-)
diff --git a/arch/x86/kvm/vmx/capabilities.h b/arch/x86/kvm/vmx/capabilities.h
index 2e223440e7ed..9a73087c8314 100644
--- a/arch/x86/kvm/vmx/capabilities.h
+++ b/arch/x86/kvm/vmx/capabilities.h
@@ -70,6 +70,7 @@ struct vmcs_config {
u32 vmexit_ctrl_req1;
u32 vmentry_ctrl;
u32 vmentry_ctrl_req1;
+ u64 misc;
struct nested_vmx_msrs nested;
};
extern struct vmcs_config vmcs_config;
@@ -229,11 +230,8 @@ static inline bool cpu_has_vmx_vmfunc(void)
static inline bool cpu_has_vmx_shadow_vmcs(void)
{
- u64 vmx_msr;
-
/* check if the cpu supports writing r/o exit information fields */
- rdmsrl(MSR_IA32_VMX_MISC, vmx_msr);
- if (!(vmx_msr & MSR_IA32_VMX_MISC_VMWRITE_SHADOW_RO_FIELDS))
+ if (!(vmcs_config.misc & MSR_IA32_VMX_MISC_VMWRITE_SHADOW_RO_FIELDS))
return false;
return vmcs_config.cpu_based_2nd_exec_ctrl &
@@ -375,10 +373,7 @@ static inline bool cpu_has_vmx_invvpid_global(void)
static inline bool cpu_has_vmx_intel_pt(void)
{
- u64 vmx_msr;
-
- rdmsrl(MSR_IA32_VMX_MISC, vmx_msr);
- return (vmx_msr & MSR_IA32_VMX_MISC_INTEL_PT) &&
+ return (vmcs_config.misc & MSR_IA32_VMX_MISC_INTEL_PT) &&
(vmcs_config.cpu_based_2nd_exec_ctrl & SECONDARY_EXEC_PT_USE_GPA) &&
(vmcs_config.vmentry_ctrl & VM_ENTRY_LOAD_IA32_RTIT_CTL);
}
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index c195c159738d..93cb38a4d313 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -2485,6 +2485,7 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
u32 _cpu_based_2nd_exec_control_low = 0;
u32 _vmexit_control_low = 0;
u32 _vmentry_control_low = 0;
+ u64 misc_msr;
int i;
/*
@@ -2622,6 +2623,8 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
if (((vmx_msr_high >> 18) & 15) != 6)
return -EIO;
+ rdmsrl(MSR_IA32_VMX_MISC, misc_msr);
+
vmcs_conf->size = vmx_msr_high & 0x1fff;
vmcs_conf->basic_cap = vmx_msr_high & ~0x1fff;
@@ -2638,6 +2641,7 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
vmcs_conf->vmexit_ctrl_req1 = _vmexit_control_low;
vmcs_conf->vmentry_ctrl = _vmentry_control;
vmcs_conf->vmentry_ctrl_req1 = _vmentry_control_low;
+ vmcs_conf->misc = misc_msr;
return 0;
}
@@ -8259,11 +8263,9 @@ static __init int hardware_setup(void)
if (enable_preemption_timer) {
u64 use_timer_freq = 5000ULL * 1000 * 1000;
- u64 vmx_msr;
- rdmsrl(MSR_IA32_VMX_MISC, vmx_msr);
cpu_preemption_timer_multi =
- vmx_msr & VMX_MISC_PREEMPTION_TIMER_RATE_MASK;
+ vmcs_config.misc & VMX_MISC_PREEMPTION_TIMER_RATE_MASK;
if (tsc_khz)
use_timer_freq = (u64)tsc_khz * 1000;
--
2.35.3
next prev parent reply other threads:[~2022-06-29 15:09 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-29 15:05 [PATCH v2 00/28] KVM: VMX: Support TscScaling and EnclsExitingBitmap with eVMCS + use vmcs_config for L1 VMX MSRs Vitaly Kuznetsov
2022-06-29 15:05 ` [PATCH v2 01/28] KVM: x86: hyper-v: Expose access to debug MSRs in the partition privilege flags Vitaly Kuznetsov
2022-06-29 15:05 ` [PATCH v2 02/28] x86/hyperv: Fix 'struct hv_enlightened_vmcs' definition Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 03/28] x86/hyperv: Update " Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 04/28] KVM: VMX: Define VMCS-to-EVMCS conversion for the new fields Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 05/28] KVM: nVMX: Support several new fields in eVMCSv1 Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 06/28] KVM: nVMX: Introduce KVM_CAP_HYPERV_ENLIGHTENED_VMCS2 Vitaly Kuznetsov
2022-07-06 21:35 ` Sean Christopherson
2022-07-07 9:58 ` Vitaly Kuznetsov
2022-07-07 16:17 ` Sean Christopherson
2022-07-07 16:40 ` Sean Christopherson
2022-06-29 15:06 ` [PATCH v2 07/28] KVM: selftests: Switch to KVM_CAP_HYPERV_ENLIGHTENED_VMCS2 Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 08/28] KVM: VMX: Support TSC scaling with enlightened VMCS Vitaly Kuznetsov
2022-07-07 10:01 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 09/28] KVM: selftests: Add ENCLS_EXITING_BITMAP{,HIGH} VMCS fields Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 10/28] KVM: selftests: Switch to updated eVMCSv1 definition Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 11/28] KVM: selftests: Enable TSC scaling in evmcs selftest Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 12/28] KVM: VMX: Enable VM_{EXIT,ENTRY}_LOAD_IA32_PERF_GLOBAL_CTRL for KVM on Hyper-V Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 13/28] KVM: VMX: Get rid of eVMCS specific VMX controls sanitization Vitaly Kuznetsov
2022-07-06 22:27 ` Sean Christopherson
2022-07-07 10:03 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 14/28] KVM: VMX: Check VM_ENTRY_IA32E_MODE in setup_vmcs_config() Vitaly Kuznetsov
2022-06-29 20:28 ` Jim Mattson
2022-06-29 15:06 ` [PATCH v2 15/28] KVM: VMX: Check CPU_BASED_{INTR,NMI}_WINDOW_EXITING " Vitaly Kuznetsov
2022-07-01 3:58 ` Jim Mattson
2022-07-01 8:12 ` Vitaly Kuznetsov
2022-07-06 18:44 ` Sean Christopherson
2022-06-29 15:06 ` [PATCH v2 16/28] KVM: VMX: Tweak the special handling of SECONDARY_EXEC_ENCLS_EXITING " Vitaly Kuznetsov
2022-06-29 18:56 ` Jim Mattson
2022-06-30 7:32 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 17/28] KVM: VMX: Extend VMX controls macro shenanigans Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 18/28] KVM: VMX: Move CPU_BASED_CR8_{LOAD,STORE}_EXITING filtering out of setup_vmcs_config() Vitaly Kuznetsov
2022-07-01 4:14 ` Jim Mattson
2022-06-29 15:06 ` [PATCH v2 19/28] KVM: VMX: Add missing VMEXIT controls to vmcs_config Vitaly Kuznetsov
2022-07-01 16:02 ` Jim Mattson
2022-06-29 15:06 ` [PATCH v2 20/28] KVM: VMX: Add missing VMENTRY " Vitaly Kuznetsov
2022-07-01 16:01 ` Jim Mattson
2022-07-07 10:41 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 21/28] KVM: VMX: Add missing CPU based VM execution " Vitaly Kuznetsov
2022-07-01 16:05 ` Jim Mattson
2022-06-29 15:06 ` [PATCH v2 22/28] KVM: VMX: Clear controls obsoleted by EPT at runtime, not setup Vitaly Kuznetsov
2022-07-01 16:11 ` Jim Mattson
2022-07-07 14:57 ` Vitaly Kuznetsov
2022-07-07 19:30 ` Sean Christopherson
2022-07-07 21:32 ` Jim Mattson
2022-07-07 21:39 ` Sean Christopherson
2022-07-07 23:12 ` Jim Mattson
2022-07-08 7:55 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 23/28] KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config() Vitaly Kuznetsov
2022-07-01 16:26 ` Jim Mattson
2022-07-07 12:07 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 24/28] KVM: nVMX: Use sanitized allowed-1 bits for VMX control MSRs Vitaly Kuznetsov
2022-07-01 22:54 ` Jim Mattson
2022-07-07 12:30 ` Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 25/28] KVM: VMX: Store required-1 VMX controls in vmcs_config Vitaly Kuznetsov
2022-06-29 15:06 ` [PATCH v2 26/28] KVM: nVMX: Use sanitized required-1 bits for VMX control MSRs Vitaly Kuznetsov
2022-06-29 15:06 ` Vitaly Kuznetsov [this message]
2022-06-29 18:33 ` [PATCH v2 27/28] KVM: VMX: Cache MSR_IA32_VMX_MISC in vmcs_config Jim Mattson
2022-06-29 15:06 ` [PATCH v2 28/28] KVM: nVMX: Use cached host MSR_IA32_VMX_MISC value for setting up nested MSR Vitaly Kuznetsov
2022-06-29 18:37 ` Jim Mattson
2022-06-30 7:36 ` Vitaly Kuznetsov
2022-06-30 12:27 ` Jim Mattson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220629150625.238286-28-vkuznets@redhat.com \
--to=vkuznets@redhat.com \
--cc=anrayabh@linux.microsoft.com \
--cc=jmattson@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-hyperv@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mlevitsk@redhat.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®