From: Mario Limonciello <mario.limonciello@amd.com>
To: Alex Deucher <alexander.deucher@amd.com>, <linux-kernel@vger.kernel.org>
Cc: Javier Martinez Canillas <javierm@redhat.com>,
Carlos Soriano Sanchez <csoriano@redhat.com>,
<amd-gfx@lists.freedesktop.org>,
<dri-devel@lists.freedesktop.org>,
David Airlie <airlied@gmail.com>,
"Daniel Vetter" <daniel@ffwll.ch>, <christian.koenig@amd.com>,
Lazar Lijo <Lijo.Lazar@amd.com>,
Mario Limonciello <mario.limonciello@amd.com>,
"Pan, Xinhui" <Xinhui.Pan@amd.com>
Subject: [PATCH v4 15/27] drm/amd: Load GFX9 microcode during early_init
Date: Tue, 3 Jan 2023 16:18:34 -0600 [thread overview]
Message-ID: <20230103221852.22813-16-mario.limonciello@amd.com> (raw)
In-Reply-To: <20230103221852.22813-1-mario.limonciello@amd.com>
If GFX9 microcode is required but not available during early init, the
firmware framebuffer will have already been released and the screen will
freeze.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
v3->v4:
* Move microcode load phase to early init
v2->v3:
* Fix issues found on real hardware where num_gfx_rings not set during
discovery
---
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 58 +++++----------------------
1 file changed, 9 insertions(+), 49 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index 27040821d764..4e9c230e42ca 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -1251,7 +1251,7 @@ static void gfx_v9_0_check_if_need_gfxoff(struct amdgpu_device *adev)
}
static int gfx_v9_0_init_cp_gfx_microcode(struct amdgpu_device *adev,
- const char *chip_name)
+ char *chip_name)
{
char fw_name[30];
int err;
@@ -1287,7 +1287,7 @@ static int gfx_v9_0_init_cp_gfx_microcode(struct amdgpu_device *adev,
}
static int gfx_v9_0_init_rlc_microcode(struct amdgpu_device *adev,
- const char *chip_name)
+ char *chip_name)
{
char fw_name[30];
int err;
@@ -1344,7 +1344,7 @@ static bool gfx_v9_0_load_mec2_fw_bin_support(struct amdgpu_device *adev)
}
static int gfx_v9_0_init_cp_compute_microcode(struct amdgpu_device *adev,
- const char *chip_name)
+ char *chip_name)
{
char fw_name[30];
int err;
@@ -1392,58 +1392,24 @@ static int gfx_v9_0_init_cp_compute_microcode(struct amdgpu_device *adev,
static int gfx_v9_0_init_microcode(struct amdgpu_device *adev)
{
- const char *chip_name;
+ char ucode_prefix[30];
int r;
DRM_DEBUG("\n");
-
- switch (adev->ip_versions[GC_HWIP][0]) {
- case IP_VERSION(9, 0, 1):
- chip_name = "vega10";
- break;
- case IP_VERSION(9, 2, 1):
- chip_name = "vega12";
- break;
- case IP_VERSION(9, 4, 0):
- chip_name = "vega20";
- break;
- case IP_VERSION(9, 2, 2):
- case IP_VERSION(9, 1, 0):
- if (adev->apu_flags & AMD_APU_IS_RAVEN2)
- chip_name = "raven2";
- else if (adev->apu_flags & AMD_APU_IS_PICASSO)
- chip_name = "picasso";
- else
- chip_name = "raven";
- break;
- case IP_VERSION(9, 4, 1):
- chip_name = "arcturus";
- break;
- case IP_VERSION(9, 3, 0):
- if (adev->apu_flags & AMD_APU_IS_RENOIR)
- chip_name = "renoir";
- else
- chip_name = "green_sardine";
- break;
- case IP_VERSION(9, 4, 2):
- chip_name = "aldebaran";
- break;
- default:
- BUG();
- }
+ amdgpu_ucode_ip_version_decode(adev, GC_HWIP, ucode_prefix, sizeof(ucode_prefix));
/* No CPG in Arcturus */
if (adev->gfx.num_gfx_rings) {
- r = gfx_v9_0_init_cp_gfx_microcode(adev, chip_name);
+ r = gfx_v9_0_init_cp_gfx_microcode(adev, ucode_prefix);
if (r)
return r;
}
- r = gfx_v9_0_init_rlc_microcode(adev, chip_name);
+ r = gfx_v9_0_init_rlc_microcode(adev, ucode_prefix);
if (r)
return r;
- r = gfx_v9_0_init_cp_compute_microcode(adev, chip_name);
+ r = gfx_v9_0_init_cp_compute_microcode(adev, ucode_prefix);
if (r)
return r;
@@ -2131,12 +2097,6 @@ static int gfx_v9_0_sw_init(void *handle)
adev->gfx.gfx_current_status = AMDGPU_GFX_NORMAL_MODE;
- r = gfx_v9_0_init_microcode(adev);
- if (r) {
- DRM_ERROR("Failed to load gfx firmware!\n");
- return r;
- }
-
if (adev->gfx.rlc.funcs) {
if (adev->gfx.rlc.funcs->init) {
r = adev->gfx.rlc.funcs->init(adev);
@@ -4578,7 +4538,7 @@ static int gfx_v9_0_early_init(void *handle)
/* init rlcg reg access ctrl */
gfx_v9_0_init_rlcg_reg_access_ctrl(adev);
- return 0;
+ return gfx_v9_0_init_microcode(adev);
}
static int gfx_v9_0_ecc_late_init(void *handle)
--
2.34.1
next prev parent reply other threads:[~2023-01-03 22:21 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-03 22:18 [PATCH v4 00/27] Recover from failure to probe GPU Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 01/27] drm/amd: Delay removal of the firmware framebuffer Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 02/27] drm/amd: Add a legacy mapping to "amdgpu_ucode_ip_version_decode" Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 03/27] drm/amd: Convert SMUv11 microcode to use `amdgpu_ucode_ip_version_decode` Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 04/27] drm/amd: Convert SMUv13 " Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 05/27] drm/amd: Add a new helper for loading/validating microcode Mario Limonciello
2023-01-04 4:53 ` Lazar, Lijo
2023-01-04 9:37 ` Christian König
2023-01-03 22:18 ` [PATCH v4 06/27] drm/amd: Use `amdgpu_ucode_load` helper for SDMA Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 07/27] drm/amd: Convert SDMA to use `amdgpu_ucode_ip_version_decode` Mario Limonciello
2023-01-04 4:54 ` Lazar, Lijo
2023-01-03 22:18 ` [PATCH v4 08/27] drm/amd: Make SDMA firmware load failures less noisy Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 09/27] drm/amd: Use `amdgpu_ucode_load` helper for VCN Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 10/27] drm/amd: Load VCN microcode during early_init Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 11/27] drm/amd: Load MES " Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 12/27] drm/amd: Use `amdgpu_ucode_load` helper for MES Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 13/27] drm/amd: Remove superfluous assignment for `adev->mes.adev` Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 14/27] drm/amd: Use `amdgpu_ucode_load` helper for GFX9 Mario Limonciello
2023-01-03 22:18 ` Mario Limonciello [this message]
2023-01-03 22:18 ` [PATCH v4 16/27] drm/amd: Use `amdgpu_ucode_load` helper for GFX10 Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 17/27] drm/amd: Load GFX10 microcode during early_init Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 18/27] drm/amd: Use `amdgpu_ucode_load` helper for GFX11 Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 19/27] drm/amd: Load GFX11 microcode during early_init Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 20/27] drm/amd: Parse both v1 and v2 TA microcode headers using same function Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 21/27] drm/amd: Avoid BUG() for case of SRIOV missing IP version Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 22/27] drm/amd: Load PSP microcode during early_init Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 23/27] drm/amd: Use `amdgpu_ucode_load` helper for PSP Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 24/27] drm/amd/display: Load DMUB microcode during early_init Mario Limonciello
2023-01-04 15:52 ` Harry Wentland
2023-01-03 22:18 ` [PATCH v4 25/27] drm/amd: Use `amdgpu_ucode_load` helper for SMU Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 26/27] drm/amd: Load SMU microcode during early_init Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 27/27] drm/amd: Optimize SRIOV switch/case for PSP microcode load Mario Limonciello
2023-01-04 13:18 ` Christian König
2023-01-04 15:42 ` Limonciello, Mario
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230103221852.22813-16-mario.limonciello@amd.com \
--to=mario.limonciello@amd.com \
--cc=Lijo.Lazar@amd.com \
--cc=Xinhui.Pan@amd.com \
--cc=airlied@gmail.com \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=christian.koenig@amd.com \
--cc=csoriano@redhat.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=javierm@redhat.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®