mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Mario Limonciello <mario.limonciello@amd.com>
To: Alex Deucher <alexander.deucher@amd.com>, <linux-kernel@vger.kernel.org>
Cc: Javier Martinez Canillas <javierm@redhat.com>,
	Carlos Soriano Sanchez <csoriano@redhat.com>,
	<amd-gfx@lists.freedesktop.org>,
	<dri-devel@lists.freedesktop.org>,
	David Airlie <airlied@gmail.com>,
	"Daniel Vetter" <daniel@ffwll.ch>, <christian.koenig@amd.com>,
	Lazar Lijo <Lijo.Lazar@amd.com>,
	Mario Limonciello <mario.limonciello@amd.com>,
	"Pan, Xinhui" <Xinhui.Pan@amd.com>
Subject: [PATCH v4 17/27] drm/amd: Load GFX10 microcode during early_init
Date: Tue, 3 Jan 2023 16:18:36 -0600	[thread overview]
Message-ID: <20230103221852.22813-18-mario.limonciello@amd.com> (raw)
In-Reply-To: <20230103221852.22813-1-mario.limonciello@amd.com>

Simplifies the code so that GFX10 will get the firmware
name from `amdgpu_ucode_ip_version_decode` and then use this filename
to load microcode as part of the early_init process.

Any failures will cause the driver to fail to probe before the firmware
framebuffer has been removed.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
v3->v4:
 * Move out of discovery into early_init
---
 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 82 ++++++--------------------
 1 file changed, 17 insertions(+), 65 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
index 5f6b59e23313..75781722c7e9 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -3974,9 +3974,9 @@ static void gfx_v10_0_check_gfxoff_flag(struct amdgpu_device *adev)
 
 static int gfx_v10_0_init_microcode(struct amdgpu_device *adev)
 {
-	const char *chip_name;
 	char fw_name[40];
-	char *wks = "";
+	char ucode_prefix[30];
+	const char *wks = "";
 	int err;
 	const struct rlc_firmware_header_v2_0 *rlc_hdr;
 	uint16_t version_major;
@@ -3984,71 +3984,31 @@ static int gfx_v10_0_init_microcode(struct amdgpu_device *adev)
 
 	DRM_DEBUG("\n");
 
-	switch (adev->ip_versions[GC_HWIP][0]) {
-	case IP_VERSION(10, 1, 10):
-		chip_name = "navi10";
-		break;
-	case IP_VERSION(10, 1, 1):
-		chip_name = "navi14";
-		if (!(adev->pdev->device == 0x7340 &&
-		      adev->pdev->revision != 0x00))
-			wks = "_wks";
-		break;
-	case IP_VERSION(10, 1, 2):
-		chip_name = "navi12";
-		break;
-	case IP_VERSION(10, 3, 0):
-		chip_name = "sienna_cichlid";
-		break;
-	case IP_VERSION(10, 3, 2):
-		chip_name = "navy_flounder";
-		break;
-	case IP_VERSION(10, 3, 1):
-		chip_name = "vangogh";
-		break;
-	case IP_VERSION(10, 3, 4):
-		chip_name = "dimgrey_cavefish";
-		break;
-	case IP_VERSION(10, 3, 5):
-		chip_name = "beige_goby";
-		break;
-	case IP_VERSION(10, 3, 3):
-		chip_name = "yellow_carp";
-		break;
-	case IP_VERSION(10, 3, 6):
-		chip_name = "gc_10_3_6";
-		break;
-	case IP_VERSION(10, 1, 3):
-	case IP_VERSION(10, 1, 4):
-		chip_name = "cyan_skillfish2";
-		break;
-	case IP_VERSION(10, 3, 7):
-		chip_name = "gc_10_3_7";
-		break;
-	default:
-		BUG();
-	}
+	if (adev->ip_versions[GC_HWIP][0] == IP_VERSION(10, 1, 1) &&
+	   (!(adev->pdev->device == 0x7340 && adev->pdev->revision != 0x00)))
+		wks = "_wks";
+	amdgpu_ucode_ip_version_decode(adev, GC_HWIP, ucode_prefix, sizeof(ucode_prefix));
 
-	snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp%s.bin", chip_name, wks);
+	snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_pfp%s.bin", ucode_prefix, wks);
 	err = amdgpu_ucode_load(adev, &adev->gfx.pfp_fw, fw_name);
 	if (err)
 		goto out;
 	amdgpu_gfx_cp_init_microcode(adev, AMDGPU_UCODE_ID_CP_PFP);
 
-	snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me%s.bin", chip_name, wks);
+	snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_me%s.bin", ucode_prefix, wks);
 	err = amdgpu_ucode_load(adev, &adev->gfx.me_fw, fw_name);
 	if (err)
 		goto out;
 	amdgpu_gfx_cp_init_microcode(adev, AMDGPU_UCODE_ID_CP_ME);
 
-	snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ce%s.bin", chip_name, wks);
+	snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_ce%s.bin", ucode_prefix, wks);
 	err = amdgpu_ucode_load(adev, &adev->gfx.ce_fw, fw_name);
 	if (err)
 		goto out;
 	amdgpu_gfx_cp_init_microcode(adev, AMDGPU_UCODE_ID_CP_CE);
 
 	if (!amdgpu_sriov_vf(adev)) {
-		snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", chip_name);
+		snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_rlc.bin", ucode_prefix);
 		err = amdgpu_ucode_load(adev, &adev->gfx.rlc_fw, fw_name);
 		/* don't check this.  There are apparently firmwares in the wild with
 		 * incorrect size in the header
@@ -4067,14 +4027,14 @@ static int gfx_v10_0_init_microcode(struct amdgpu_device *adev)
 			goto out;
 	}
 
-	snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec%s.bin", chip_name, wks);
+	snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec%s.bin", ucode_prefix, wks);
 	err = amdgpu_ucode_load(adev, &adev->gfx.mec_fw, fw_name);
 	if (err)
 		goto out;
 	amdgpu_gfx_cp_init_microcode(adev, AMDGPU_UCODE_ID_CP_MEC1);
 	amdgpu_gfx_cp_init_microcode(adev, AMDGPU_UCODE_ID_CP_MEC1_JT);
 
-	snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec2%s.bin", chip_name, wks);
+	snprintf(fw_name, sizeof(fw_name), "amdgpu/%s_mec2%s.bin", ucode_prefix, wks);
 	err = amdgpu_ucode_load(adev, &adev->gfx.mec2_fw, fw_name);
 	if (!err) {
 		amdgpu_gfx_cp_init_microcode(adev, AMDGPU_UCODE_ID_CP_MEC2);
@@ -4083,6 +4043,8 @@ static int gfx_v10_0_init_microcode(struct amdgpu_device *adev)
 		err = 0;
 		adev->gfx.mec2_fw = NULL;
 	}
+	amdgpu_gfx_cp_init_microcode(adev, AMDGPU_UCODE_ID_CP_MEC2);
+	amdgpu_gfx_cp_init_microcode(adev, AMDGPU_UCODE_ID_CP_MEC2_JT);
 
 	gfx_v10_0_check_fw_write_wait(adev);
 out:
@@ -4251,19 +4213,11 @@ static void gfx_v10_0_mec_fini(struct amdgpu_device *adev)
 	amdgpu_bo_free_kernel(&adev->gfx.mec.mec_fw_obj, NULL, NULL);
 }
 
-static int gfx_v10_0_me_init(struct amdgpu_device *adev)
+static void gfx_v10_0_me_init(struct amdgpu_device *adev)
 {
-	int r;
-
 	bitmap_zero(adev->gfx.me.queue_bitmap, AMDGPU_MAX_GFX_QUEUES);
 
 	amdgpu_gfx_graphics_queue_acquire(adev);
-
-	r = gfx_v10_0_init_microcode(adev);
-	if (r)
-		DRM_ERROR("Failed to load gfx firmware!\n");
-
-	return r;
 }
 
 static int gfx_v10_0_mec_init(struct amdgpu_device *adev)
@@ -4631,9 +4585,7 @@ static int gfx_v10_0_sw_init(void *handle)
 
 	adev->gfx.gfx_current_status = AMDGPU_GFX_NORMAL_MODE;
 
-	r = gfx_v10_0_me_init(adev);
-	if (r)
-		return r;
+	gfx_v10_0_me_init(adev);
 
 	if (adev->gfx.rlc.funcs) {
 		if (adev->gfx.rlc.funcs->init) {
@@ -7611,7 +7563,7 @@ static int gfx_v10_0_early_init(void *handle)
 	/* init rlcg reg access ctrl */
 	gfx_v10_0_init_rlcg_reg_access_ctrl(adev);
 
-	return 0;
+	return gfx_v10_0_init_microcode(adev);
 }
 
 static int gfx_v10_0_late_init(void *handle)
-- 
2.34.1


  parent reply	other threads:[~2023-01-03 22:21 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-03 22:18 [PATCH v4 00/27] Recover from failure to probe GPU Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 01/27] drm/amd: Delay removal of the firmware framebuffer Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 02/27] drm/amd: Add a legacy mapping to "amdgpu_ucode_ip_version_decode" Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 03/27] drm/amd: Convert SMUv11 microcode to use `amdgpu_ucode_ip_version_decode` Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 04/27] drm/amd: Convert SMUv13 " Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 05/27] drm/amd: Add a new helper for loading/validating microcode Mario Limonciello
2023-01-04  4:53   ` Lazar, Lijo
2023-01-04  9:37     ` Christian König
2023-01-03 22:18 ` [PATCH v4 06/27] drm/amd: Use `amdgpu_ucode_load` helper for SDMA Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 07/27] drm/amd: Convert SDMA to use `amdgpu_ucode_ip_version_decode` Mario Limonciello
2023-01-04  4:54   ` Lazar, Lijo
2023-01-03 22:18 ` [PATCH v4 08/27] drm/amd: Make SDMA firmware load failures less noisy Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 09/27] drm/amd: Use `amdgpu_ucode_load` helper for VCN Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 10/27] drm/amd: Load VCN microcode during early_init Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 11/27] drm/amd: Load MES " Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 12/27] drm/amd: Use `amdgpu_ucode_load` helper for MES Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 13/27] drm/amd: Remove superfluous assignment for `adev->mes.adev` Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 14/27] drm/amd: Use `amdgpu_ucode_load` helper for GFX9 Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 15/27] drm/amd: Load GFX9 microcode during early_init Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 16/27] drm/amd: Use `amdgpu_ucode_load` helper for GFX10 Mario Limonciello
2023-01-03 22:18 ` Mario Limonciello [this message]
2023-01-03 22:18 ` [PATCH v4 18/27] drm/amd: Use `amdgpu_ucode_load` helper for GFX11 Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 19/27] drm/amd: Load GFX11 microcode during early_init Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 20/27] drm/amd: Parse both v1 and v2 TA microcode headers using same function Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 21/27] drm/amd: Avoid BUG() for case of SRIOV missing IP version Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 22/27] drm/amd: Load PSP microcode during early_init Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 23/27] drm/amd: Use `amdgpu_ucode_load` helper for PSP Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 24/27] drm/amd/display: Load DMUB microcode during early_init Mario Limonciello
2023-01-04 15:52   ` Harry Wentland
2023-01-03 22:18 ` [PATCH v4 25/27] drm/amd: Use `amdgpu_ucode_load` helper for SMU Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 26/27] drm/amd: Load SMU microcode during early_init Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 27/27] drm/amd: Optimize SRIOV switch/case for PSP microcode load Mario Limonciello
2023-01-04 13:18   ` Christian König
2023-01-04 15:42     ` Limonciello, Mario

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230103221852.22813-18-mario.limonciello@amd.com \
    --to=mario.limonciello@amd.com \
    --cc=Lijo.Lazar@amd.com \
    --cc=Xinhui.Pan@amd.com \
    --cc=airlied@gmail.com \
    --cc=alexander.deucher@amd.com \
    --cc=amd-gfx@lists.freedesktop.org \
    --cc=christian.koenig@amd.com \
    --cc=csoriano@redhat.com \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=javierm@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®