From: Mario Limonciello <mario.limonciello@amd.com>
To: Alex Deucher <alexander.deucher@amd.com>, <linux-kernel@vger.kernel.org>
Cc: Javier Martinez Canillas <javierm@redhat.com>,
Carlos Soriano Sanchez <csoriano@redhat.com>,
<amd-gfx@lists.freedesktop.org>,
<dri-devel@lists.freedesktop.org>,
David Airlie <airlied@gmail.com>,
"Daniel Vetter" <daniel@ffwll.ch>, <christian.koenig@amd.com>,
Lazar Lijo <Lijo.Lazar@amd.com>,
Mario Limonciello <mario.limonciello@amd.com>,
"Pan, Xinhui" <Xinhui.Pan@amd.com>
Subject: [PATCH v4 05/27] drm/amd: Add a new helper for loading/validating microcode
Date: Tue, 3 Jan 2023 16:18:24 -0600 [thread overview]
Message-ID: <20230103221852.22813-6-mario.limonciello@amd.com> (raw)
In-Reply-To: <20230103221852.22813-1-mario.limonciello@amd.com>
All microcode runs a basic validation after it's been loaded. Each
IP block as part of init will run both.
Introduce a wrapper for request_firmware and amdgpu_ucode_validate.
This wrapper will also remap any error codes from request_firmware
to -ENODEV. This is so that early_init will fail if firmware couldn't
be loaded instead of the IP block being disabled.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
v3-v4:
* New patch
---
drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c | 24 +++++++++++++++++++++++
drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.h | 1 +
2 files changed, 25 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c
index eafcddce58d3..8c4a7b09e344 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.c
@@ -1312,3 +1312,27 @@ void amdgpu_ucode_ip_version_decode(struct amdgpu_device *adev, int block_type,
snprintf(ucode_prefix, len, "%s_%d_%d_%d", ip_name, maj, min, rev);
}
+
+/*
+ * amdgpu_ucode_load - Load and validate amdgpu microcode
+ *
+ * @adev: amdgpu device
+ * @fw: pointer to load firmware to
+ * @fw_name: firmware to load
+ *
+ * This is a helper that will use request_firmware and amdgpu_ucode_validate
+ * to load and run basic validation on firmware. If the load fails, remap
+ * the error code to -ENODEV, so that early_init functions will fail to load.
+ */
+int amdgpu_ucode_load(struct amdgpu_device *adev, const struct firmware **fw, char *fw_name)
+{
+ int err = request_firmware(fw, fw_name, adev->dev);
+
+ if (err)
+ return -ENODEV;
+ err = amdgpu_ucode_validate(*fw);
+ if (err)
+ dev_dbg(adev->dev, "\"%s\" failed to validate\n", fw_name);
+
+ return err;
+}
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.h
index 552e06929229..b9139fb44506 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ucode.h
@@ -544,6 +544,7 @@ void amdgpu_ucode_print_sdma_hdr(const struct common_firmware_header *hdr);
void amdgpu_ucode_print_psp_hdr(const struct common_firmware_header *hdr);
void amdgpu_ucode_print_gpu_info_hdr(const struct common_firmware_header *hdr);
int amdgpu_ucode_validate(const struct firmware *fw);
+int amdgpu_ucode_load(struct amdgpu_device *adev, const struct firmware **fw, char *fw_name);
bool amdgpu_ucode_hdr_version(union amdgpu_firmware_header *hdr,
uint16_t hdr_major, uint16_t hdr_minor);
--
2.34.1
next prev parent reply other threads:[~2023-01-03 22:19 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-03 22:18 [PATCH v4 00/27] Recover from failure to probe GPU Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 01/27] drm/amd: Delay removal of the firmware framebuffer Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 02/27] drm/amd: Add a legacy mapping to "amdgpu_ucode_ip_version_decode" Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 03/27] drm/amd: Convert SMUv11 microcode to use `amdgpu_ucode_ip_version_decode` Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 04/27] drm/amd: Convert SMUv13 " Mario Limonciello
2023-01-03 22:18 ` Mario Limonciello [this message]
2023-01-04 4:53 ` [PATCH v4 05/27] drm/amd: Add a new helper for loading/validating microcode Lazar, Lijo
2023-01-04 9:37 ` Christian König
2023-01-03 22:18 ` [PATCH v4 06/27] drm/amd: Use `amdgpu_ucode_load` helper for SDMA Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 07/27] drm/amd: Convert SDMA to use `amdgpu_ucode_ip_version_decode` Mario Limonciello
2023-01-04 4:54 ` Lazar, Lijo
2023-01-03 22:18 ` [PATCH v4 08/27] drm/amd: Make SDMA firmware load failures less noisy Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 09/27] drm/amd: Use `amdgpu_ucode_load` helper for VCN Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 10/27] drm/amd: Load VCN microcode during early_init Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 11/27] drm/amd: Load MES " Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 12/27] drm/amd: Use `amdgpu_ucode_load` helper for MES Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 13/27] drm/amd: Remove superfluous assignment for `adev->mes.adev` Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 14/27] drm/amd: Use `amdgpu_ucode_load` helper for GFX9 Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 15/27] drm/amd: Load GFX9 microcode during early_init Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 16/27] drm/amd: Use `amdgpu_ucode_load` helper for GFX10 Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 17/27] drm/amd: Load GFX10 microcode during early_init Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 18/27] drm/amd: Use `amdgpu_ucode_load` helper for GFX11 Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 19/27] drm/amd: Load GFX11 microcode during early_init Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 20/27] drm/amd: Parse both v1 and v2 TA microcode headers using same function Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 21/27] drm/amd: Avoid BUG() for case of SRIOV missing IP version Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 22/27] drm/amd: Load PSP microcode during early_init Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 23/27] drm/amd: Use `amdgpu_ucode_load` helper for PSP Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 24/27] drm/amd/display: Load DMUB microcode during early_init Mario Limonciello
2023-01-04 15:52 ` Harry Wentland
2023-01-03 22:18 ` [PATCH v4 25/27] drm/amd: Use `amdgpu_ucode_load` helper for SMU Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 26/27] drm/amd: Load SMU microcode during early_init Mario Limonciello
2023-01-03 22:18 ` [PATCH v4 27/27] drm/amd: Optimize SRIOV switch/case for PSP microcode load Mario Limonciello
2023-01-04 13:18 ` Christian König
2023-01-04 15:42 ` Limonciello, Mario
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230103221852.22813-6-mario.limonciello@amd.com \
--to=mario.limonciello@amd.com \
--cc=Lijo.Lazar@amd.com \
--cc=Xinhui.Pan@amd.com \
--cc=airlied@gmail.com \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=christian.koenig@amd.com \
--cc=csoriano@redhat.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=javierm@redhat.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®