From: Mario Limonciello <mario.limonciello@amd.com>
To: Alex Deucher <alexander.deucher@amd.com>, <linux-kernel@vger.kernel.org>
Cc: Javier Martinez Canillas <javierm@redhat.com>,
Carlos Soriano Sanchez <csoriano@redhat.com>,
<amd-gfx@lists.freedesktop.org>,
<dri-devel@lists.freedesktop.org>,
David Airlie <airlied@gmail.com>,
"Daniel Vetter" <daniel@ffwll.ch>, <christian.koenig@amd.com>,
Lazar Lijo <Lijo.Lazar@amd.com>,
Mario Limonciello <mario.limonciello@amd.com>,
"Harry Wentland" <harry.wentland@amd.com>,
Leo Li <sunpeng.li@amd.com>,
"Rodrigo Siqueira" <Rodrigo.Siqueira@amd.com>,
"Pan, Xinhui" <Xinhui.Pan@amd.com>
Subject: [PATCH v6 24/45] drm/amd/display: Load DMUB microcode during early_init
Date: Wed, 4 Jan 2023 21:42:58 -0600 [thread overview]
Message-ID: <20230105034327.1439-25-mario.limonciello@amd.com> (raw)
In-Reply-To: <20230105034327.1439-1-mario.limonciello@amd.com>
If DMUB is required for an ASIC, ensure that the microcode is available
and validates during early_init.
Any failures will cause the driver to fail to probe before the firmware
framebuffer has been removed.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 89 ++++++++++++-------
1 file changed, 58 insertions(+), 31 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 4829b5431e4c..c8c5d37c8b3a 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1945,7 +1945,6 @@ static int dm_dmub_sw_init(struct amdgpu_device *adev)
struct dmub_srv_fb_info *fb_info;
struct dmub_srv *dmub_srv;
const struct dmcub_firmware_header_v1_0 *hdr;
- const char *fw_name_dmub;
enum dmub_asic dmub_asic;
enum dmub_status status;
int r;
@@ -1953,73 +1952,46 @@ static int dm_dmub_sw_init(struct amdgpu_device *adev)
switch (adev->ip_versions[DCE_HWIP][0]) {
case IP_VERSION(2, 1, 0):
dmub_asic = DMUB_ASIC_DCN21;
- fw_name_dmub = FIRMWARE_RENOIR_DMUB;
- if (ASICREV_IS_GREEN_SARDINE(adev->external_rev_id))
- fw_name_dmub = FIRMWARE_GREEN_SARDINE_DMUB;
break;
case IP_VERSION(3, 0, 0):
- if (adev->ip_versions[GC_HWIP][0] == IP_VERSION(10, 3, 0)) {
+ if (adev->ip_versions[GC_HWIP][0] == IP_VERSION(10, 3, 0))
dmub_asic = DMUB_ASIC_DCN30;
- fw_name_dmub = FIRMWARE_SIENNA_CICHLID_DMUB;
- } else {
+ else
dmub_asic = DMUB_ASIC_DCN30;
- fw_name_dmub = FIRMWARE_NAVY_FLOUNDER_DMUB;
- }
break;
case IP_VERSION(3, 0, 1):
dmub_asic = DMUB_ASIC_DCN301;
- fw_name_dmub = FIRMWARE_VANGOGH_DMUB;
break;
case IP_VERSION(3, 0, 2):
dmub_asic = DMUB_ASIC_DCN302;
- fw_name_dmub = FIRMWARE_DIMGREY_CAVEFISH_DMUB;
break;
case IP_VERSION(3, 0, 3):
dmub_asic = DMUB_ASIC_DCN303;
- fw_name_dmub = FIRMWARE_BEIGE_GOBY_DMUB;
break;
case IP_VERSION(3, 1, 2):
case IP_VERSION(3, 1, 3):
dmub_asic = (adev->external_rev_id == YELLOW_CARP_B0) ? DMUB_ASIC_DCN31B : DMUB_ASIC_DCN31;
- fw_name_dmub = FIRMWARE_YELLOW_CARP_DMUB;
break;
case IP_VERSION(3, 1, 4):
dmub_asic = DMUB_ASIC_DCN314;
- fw_name_dmub = FIRMWARE_DCN_314_DMUB;
break;
case IP_VERSION(3, 1, 5):
dmub_asic = DMUB_ASIC_DCN315;
- fw_name_dmub = FIRMWARE_DCN_315_DMUB;
break;
case IP_VERSION(3, 1, 6):
dmub_asic = DMUB_ASIC_DCN316;
- fw_name_dmub = FIRMWARE_DCN316_DMUB;
break;
case IP_VERSION(3, 2, 0):
dmub_asic = DMUB_ASIC_DCN32;
- fw_name_dmub = FIRMWARE_DCN_V3_2_0_DMCUB;
break;
case IP_VERSION(3, 2, 1):
dmub_asic = DMUB_ASIC_DCN321;
- fw_name_dmub = FIRMWARE_DCN_V3_2_1_DMCUB;
break;
default:
/* ASIC doesn't support DMUB. */
return 0;
}
- r = request_firmware_direct(&adev->dm.dmub_fw, fw_name_dmub, adev->dev);
- if (r) {
- DRM_ERROR("DMUB firmware loading failed: %d\n", r);
- return 0;
- }
-
- r = amdgpu_ucode_validate(adev->dm.dmub_fw);
- if (r) {
- DRM_ERROR("Couldn't validate DMUB firmware: %d\n", r);
- return 0;
- }
-
hdr = (const struct dmcub_firmware_header_v1_0 *)adev->dm.dmub_fw->data;
adev->dm.dmcub_fw_version = le32_to_cpu(hdr->header.ucode_version);
@@ -4513,6 +4485,61 @@ DEVICE_ATTR_WO(s3_debug);
#endif
+static int dm_init_microcode(struct amdgpu_device *adev)
+{
+ char *fw_name_dmub;
+ int r;
+
+ switch (adev->ip_versions[DCE_HWIP][0]) {
+ case IP_VERSION(2, 1, 0):
+ fw_name_dmub = FIRMWARE_RENOIR_DMUB;
+ if (ASICREV_IS_GREEN_SARDINE(adev->external_rev_id))
+ fw_name_dmub = FIRMWARE_GREEN_SARDINE_DMUB;
+ break;
+ case IP_VERSION(3, 0, 0):
+ if (adev->ip_versions[GC_HWIP][0] == IP_VERSION(10, 3, 0))
+ fw_name_dmub = FIRMWARE_SIENNA_CICHLID_DMUB;
+ else
+ fw_name_dmub = FIRMWARE_NAVY_FLOUNDER_DMUB;
+ break;
+ case IP_VERSION(3, 0, 1):
+ fw_name_dmub = FIRMWARE_VANGOGH_DMUB;
+ break;
+ case IP_VERSION(3, 0, 2):
+ fw_name_dmub = FIRMWARE_DIMGREY_CAVEFISH_DMUB;
+ break;
+ case IP_VERSION(3, 0, 3):
+ fw_name_dmub = FIRMWARE_BEIGE_GOBY_DMUB;
+ break;
+ case IP_VERSION(3, 1, 2):
+ case IP_VERSION(3, 1, 3):
+ fw_name_dmub = FIRMWARE_YELLOW_CARP_DMUB;
+ break;
+ case IP_VERSION(3, 1, 4):
+ fw_name_dmub = FIRMWARE_DCN_314_DMUB;
+ break;
+ case IP_VERSION(3, 1, 5):
+ fw_name_dmub = FIRMWARE_DCN_315_DMUB;
+ break;
+ case IP_VERSION(3, 1, 6):
+ fw_name_dmub = FIRMWARE_DCN316_DMUB;
+ break;
+ case IP_VERSION(3, 2, 0):
+ fw_name_dmub = FIRMWARE_DCN_V3_2_0_DMCUB;
+ break;
+ case IP_VERSION(3, 2, 1):
+ fw_name_dmub = FIRMWARE_DCN_V3_2_1_DMCUB;
+ break;
+ default:
+ /* ASIC doesn't support DMUB. */
+ return 0;
+ }
+ r = amdgpu_ucode_request(adev, &adev->dm.dmub_fw, fw_name_dmub);
+ if (r)
+ DRM_ERROR("DMUB firmware loading failed: %d\n", r);
+ return r;
+}
+
static int dm_early_init(void *handle)
{
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
@@ -4645,7 +4672,7 @@ static int dm_early_init(void *handle)
#endif
adev->dc_enabled = true;
- return 0;
+ return dm_init_microcode(adev);
}
static bool modereset_required(struct drm_crtc_state *crtc_state)
--
2.34.1
next prev parent reply other threads:[~2023-01-05 3:46 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-05 3:42 [PATCH v6 00/45] Recover from failure to probe GPU Mario Limonciello
2023-01-05 3:42 ` [PATCH v6 01/45] drm/amd: Delay removal of the firmware framebuffer Mario Limonciello
2023-01-05 3:42 ` [PATCH v6 02/45] drm/amd: Add a legacy mapping to "amdgpu_ucode_ip_version_decode" Mario Limonciello
2023-01-05 3:42 ` [PATCH v6 03/45] drm/amd: Convert SMUv11 microcode to use `amdgpu_ucode_ip_version_decode` Mario Limonciello
2023-01-05 3:42 ` [PATCH v6 04/45] drm/amd: Convert SMUv13 " Mario Limonciello
2023-01-05 3:42 ` [PATCH v6 05/45] drm/amd: Add a new helper for loading/validating microcode Mario Limonciello
2023-01-05 5:07 ` Lazar, Lijo
2023-01-05 5:23 ` Mario Limonciello
2023-01-05 5:29 ` Lazar, Lijo
2023-01-05 5:37 ` Mario Limonciello
2023-01-05 3:42 ` [PATCH v6 06/45] drm/amd: Use `amdgpu_ucode_request` helper for SDMA Mario Limonciello
2023-01-05 3:42 ` [PATCH v6 07/45] drm/amd: Convert SDMA to use `amdgpu_ucode_ip_version_decode` Mario Limonciello
2023-01-05 3:42 ` [PATCH v6 08/45] drm/amd: Make SDMA firmware load failures less noisy Mario Limonciello
2023-01-05 3:42 ` [PATCH v6 09/45] drm/amd: Use `amdgpu_ucode_*` helpers for VCN Mario Limonciello
2023-01-05 3:42 ` [PATCH v6 10/45] drm/amd: Load VCN microcode during early_init Mario Limonciello
2023-01-05 3:42 ` [PATCH v6 11/45] drm/amd: Load MES " Mario Limonciello
2023-01-05 3:42 ` [PATCH v6 12/45] drm/amd: Use `amdgpu_ucode_*` helpers for MES Mario Limonciello
2023-01-05 3:42 ` [PATCH v6 13/45] drm/amd: Remove superfluous assignment for `adev->mes.adev` Mario Limonciello
2023-01-05 3:42 ` [PATCH v6 14/45] drm/amd: Use `amdgpu_ucode_*` helpers for GFX9 Mario Limonciello
2023-01-05 3:42 ` [PATCH v6 15/45] drm/amd: Load GFX9 microcode during early_init Mario Limonciello
2023-01-05 3:42 ` [PATCH v6 16/45] drm/amd: Use `amdgpu_ucode_*` helpers for GFX10 Mario Limonciello
2023-01-05 3:42 ` [PATCH v6 17/45] drm/amd: Load GFX10 microcode during early_init Mario Limonciello
2023-01-05 3:42 ` [PATCH v6 18/45] drm/amd: Use `amdgpu_ucode_*` helpers for GFX11 Mario Limonciello
2023-01-05 3:42 ` [PATCH v6 19/45] drm/amd: Load GFX11 microcode during early_init Mario Limonciello
2023-01-05 3:42 ` [PATCH v6 20/45] drm/amd: Parse both v1 and v2 TA microcode headers using same function Mario Limonciello
2023-01-05 13:22 ` Lazar, Lijo
2023-01-05 16:04 ` Limonciello, Mario
2023-01-05 3:42 ` [PATCH v6 21/45] drm/amd: Avoid BUG() for case of SRIOV missing IP version Mario Limonciello
2023-01-05 3:42 ` [PATCH v6 22/45] drm/amd: Load PSP microcode during early_init Mario Limonciello
2023-01-05 3:42 ` [PATCH v6 23/45] drm/amd: Use `amdgpu_ucode_*` helpers for PSP Mario Limonciello
2023-01-05 3:42 ` Mario Limonciello [this message]
2023-01-05 3:42 ` [PATCH v6 25/45] drm/amd: Use `amdgpu_ucode_release` helper for DMUB Mario Limonciello
2023-01-05 17:17 ` Harry Wentland
2023-01-05 3:43 ` [PATCH v6 26/45] drm/amd: Use `amdgpu_ucode_*` helpers for SMU Mario Limonciello
2023-01-05 3:43 ` [PATCH v6 27/45] drm/amd: Load SMU microcode during early_init Mario Limonciello
2023-01-05 3:43 ` [PATCH v6 28/45] drm/amd: Optimize SRIOV switch/case for PSP microcode load Mario Limonciello
2023-01-05 3:43 ` [PATCH v6 29/45] drm/amd: Use `amdgpu_ucode_*` helpers for GFX6 Mario Limonciello
2023-01-05 3:43 ` [PATCH v6 30/45] drm/amd: Use `amdgpu_ucode_*` helpers for GFX7 Mario Limonciello
2023-01-05 3:43 ` [PATCH v6 31/45] drm/amd: Use `amdgpu_ucode_*` helpers for GFX8 Mario Limonciello
2023-01-05 3:43 ` [PATCH v6 32/45] drm/amd: Use `amdgpu_ucode_*` helpers for GMC6 Mario Limonciello
2023-01-05 3:43 ` [PATCH v6 33/45] drm/amd: Use `amdgpu_ucode_*` helpers for GMC7 Mario Limonciello
2023-01-05 3:43 ` [PATCH v6 34/45] drm/amd: Use `amdgpu_ucode_*` helpers for GMC8 Mario Limonciello
2023-01-05 3:43 ` [PATCH v6 35/45] drm/amd: Use `amdgpu_ucode_*` helpers for SDMA2.4 Mario Limonciello
2023-01-05 3:43 ` [PATCH v6 36/45] drm/amd: Use `amdgpu_ucode_*` helpers for SDMA3.0 Mario Limonciello
2023-01-05 3:43 ` [PATCH v6 37/45] drm/amd: Use `amdgpu_ucode_*` helpers for SDMA on CIK Mario Limonciello
2023-01-05 3:43 ` [PATCH v6 38/45] drm/amd: Use `amdgpu_ucode_*` helpers for UVD Mario Limonciello
2023-01-05 3:43 ` [PATCH v6 39/45] drm/amd: Use `amdgpu_ucode_*` helpers for VCE Mario Limonciello
2023-01-05 3:43 ` [PATCH v6 40/45] drm/amd: Use `amdgpu_ucode_*` helpers for CGS Mario Limonciello
2023-01-05 3:43 ` [PATCH v6 41/45] drm/amd: Use `amdgpu_ucode_*` helpers for GPU info bin Mario Limonciello
2023-01-05 3:43 ` [PATCH v6 42/45] drm/amd: Use `amdgpu_ucode_*` helpers for DMCU Mario Limonciello
2023-01-05 17:18 ` Harry Wentland
2023-01-05 3:43 ` [PATCH v6 43/45] drm/amd: Use `amdgpu_ucode_release` helper for powerplay Mario Limonciello
2023-01-05 3:43 ` [PATCH v6 44/45] drm/amd: Use `amdgpu_ucode_release` helper for si Mario Limonciello
2023-01-05 3:43 ` [PATCH v6 45/45] drm/amd: make amdgpu_ucode_validate static Mario Limonciello
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230105034327.1439-25-mario.limonciello@amd.com \
--to=mario.limonciello@amd.com \
--cc=Lijo.Lazar@amd.com \
--cc=Rodrigo.Siqueira@amd.com \
--cc=Xinhui.Pan@amd.com \
--cc=airlied@gmail.com \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=christian.koenig@amd.com \
--cc=csoriano@redhat.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=harry.wentland@amd.com \
--cc=javierm@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sunpeng.li@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®