mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: David Yang <mmyangfl@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: David Yang <mmyangfl@gmail.com>, Andrew Lunn <andrew@lunn.ch>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH] net: phy: hisi-festa: Add support for HiSilicon Festa PHYs
Date: Fri, 17 Mar 2023 22:30:42 +0800	[thread overview]
Message-ID: <20230317143042.291260-1-mmyangfl@gmail.com> (raw)

HiSilicon Festa PHYs were used on some HiSilicon SoCs. This patch injects
firmwares found on vendor kernels.

Signed-off-by: David Yang <mmyangfl@gmail.com>
---
 drivers/net/phy/Kconfig      |   5 ++
 drivers/net/phy/Makefile     |   1 +
 drivers/net/phy/hisi-festa.c | 169 +++++++++++++++++++++++++++++++++++
 3 files changed, 175 insertions(+)
 create mode 100644 drivers/net/phy/hisi-festa.c

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 54874555c..e7551e9b3 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -177,6 +177,11 @@ config DAVICOM_PHY
 	help
 	  Currently supports dm9161e and dm9131
 
+config HISI_FESTA_PHY
+	tristate "HiSilicon Festa PHYs"
+	help
+	  Supports the HiSilicon Festa PHYs.
+
 config ICPLUS_PHY
 	tristate "ICPlus PHYs"
 	help
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index b5138066b..2c5aded6b 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -60,6 +60,7 @@ obj-$(CONFIG_DP83869_PHY)	+= dp83869.o
 obj-$(CONFIG_DP83TC811_PHY)	+= dp83tc811.o
 obj-$(CONFIG_DP83TD510_PHY)	+= dp83td510.o
 obj-$(CONFIG_FIXED_PHY)		+= fixed_phy.o
+obj-$(CONFIG_HISI_FESTA_PHY)	+= hisi-festa.o
 obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o
 obj-$(CONFIG_INTEL_XWAY_PHY)	+= intel-xway.o
 obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o
diff --git a/drivers/net/phy/hisi-festa.c b/drivers/net/phy/hisi-festa.c
new file mode 100644
index 000000000..ab54ed3ca
--- /dev/null
+++ b/drivers/net/phy/hisi-festa.c
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Driver for HiSilicon Festa PHYs
+ *
+ * This module does nothing than firmware injection. If you don't use firmware,
+ * simply blacklist this module.
+ *
+ * Copyright (c) 2023 David Yang
+ */
+#include <linux/errno.h>
+#include <linux/firmware.h>
+#include <linux/init.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define PHY_ID_HISILICON_FESTAV200	0x20669813
+#define PHY_ID_HISILICON_FESTAV220	0x20669823
+#define PHY_ID_HISILICON_FESTAV300	0x20669833
+#define PHY_ID_HISILICON_FESTAV320	0x20669843
+#define PHY_ID_HISILICON_FESTAV330	0x20669853
+#define PHY_ID_HISILICON_FESTAV331	0x20669863
+
+#define MII_EXPMD	0x1d	/* Expanded memory data */
+#define MII_EXPMA	0x1e	/* Expanded memory address */
+
+/* bus->mdio_lock should be locked when using this function */
+static inline int hisi_festa_read_expanded(struct phy_device *phydev, u16 addr)
+{
+	__phy_write(phydev, MII_EXPMA, addr);
+	return __phy_read(phydev, MII_EXPMD);
+}
+
+/* bus->mdio_lock should be locked when using this function */
+static inline int hisi_festa_write_expanded(struct phy_device *phydev, u16 addr, u8 val)
+{
+	__phy_write(phydev, MII_EXPMA, addr);
+	__phy_write(phydev, MII_EXPMD, val);
+	return 0;
+}
+
+/* bus->mdio_lock should be locked when using this function */
+static inline int hisi_festa_write_expanded_mem(struct phy_device *phydev, u16 addr,
+						const u8 *data, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		hisi_festa_write_expanded(phydev, addr + i, data[i]);
+	return 0;
+}
+
+static int hisi_festa_write_fw(struct phy_device *phydev, const struct firmware *fw)
+{
+	static const u8 prologue[] = {0xbd, 0x34, 0x00, 0x39};
+	int ret;
+
+	phy_lock_mdio_bus(phydev);
+
+	ret = __phy_set_bits(phydev, MII_BMCR, BMCR_PDOWN);
+	if (ret) {
+		phydev_err(phydev, "cannot suspend device\n");
+		goto out;
+	}
+
+	hisi_festa_write_expanded_mem(phydev, 0x33f9, prologue, sizeof(prologue));
+	/* mask jump instruction */
+	hisi_festa_write_expanded(phydev, 0x3400, 0x39);
+	hisi_festa_write_expanded_mem(phydev, 0x3401, fw->data + 1, fw->size - 1);
+	/* now release firmware */
+	hisi_festa_write_expanded(phydev, 0x3400, fw->data[0]);
+	hisi_festa_write_expanded(phydev, 0x33f8, 0x01);
+
+	ret = __phy_clear_bits(phydev, MII_BMCR, BMCR_PDOWN);
+
+out:
+	phy_unlock_mdio_bus(phydev);
+	return ret;
+}
+
+static int hisi_festa_patch_fw(struct phy_device *phydev)
+{
+	int ret;
+	char fw_name[64];
+	const struct firmware *fw;
+
+	snprintf(fw_name, sizeof(fw_name), "hisilicon/festa.%08x.ucode", phydev->phy_id);
+
+	ret = request_firmware(&fw, fw_name, &phydev->mdio.dev);
+	if (ret) {
+		/* err message already printed by request_firmware */
+		return -EAGAIN;
+	}
+
+	if (fw->data[0] != 0x01 || fw->data[1] != 0xcc) {
+		phydev_err(phydev, "%s does not look like valid firmware; refused to load\n",
+			   fw_name);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	ret = hisi_festa_write_fw(phydev, fw);
+	if (ret) {
+		phydev_err(phydev, "download firmware %s failed\n", fw_name);
+		goto out;
+	}
+
+	phydev_info(phydev, "using firmware %s\n", fw_name);
+
+out:
+	release_firmware(fw);
+	return ret;
+}
+
+static int hisi_festa_config_init(struct phy_device *phydev)
+{
+	hisi_festa_patch_fw(phydev);
+	/* ok, use programmed firmware */
+	return 0;
+}
+
+static struct phy_driver hisi_festa_driver[] = {
+	{
+		PHY_ID_MATCH_MODEL(PHY_ID_HISILICON_FESTAV200),
+		.name        = "HiSilicon Festa v200/v210",
+		.config_init = hisi_festa_config_init,
+	},
+	{
+		PHY_ID_MATCH_MODEL(PHY_ID_HISILICON_FESTAV220),
+		.name        = "HiSilicon Festa v220",
+		.config_init = hisi_festa_config_init,
+	},
+	{
+		PHY_ID_MATCH_MODEL(PHY_ID_HISILICON_FESTAV300),
+		.name        = "HiSilicon Festa v300",
+		.config_init = hisi_festa_config_init,
+	},
+	{
+		PHY_ID_MATCH_MODEL(PHY_ID_HISILICON_FESTAV320),
+		.name        = "HiSilicon Festa v320",
+		.config_init = hisi_festa_config_init,
+	},
+	{
+		PHY_ID_MATCH_MODEL(PHY_ID_HISILICON_FESTAV330),
+		.name        = "HiSilicon Festa v330",
+		.config_init = hisi_festa_config_init,
+	},
+	{
+		PHY_ID_MATCH_MODEL(PHY_ID_HISILICON_FESTAV331),
+		.name        = "HiSilicon Festa v331",
+		.config_init = hisi_festa_config_init,
+	},
+};
+
+module_phy_driver(hisi_festa_driver);
+
+static struct mdio_device_id __maybe_unused hisi_festa_tbl[] = {
+	{ PHY_ID_MATCH_MODEL(PHY_ID_HISILICON_FESTAV200) },
+	{ PHY_ID_MATCH_MODEL(PHY_ID_HISILICON_FESTAV220) },
+	{ PHY_ID_MATCH_MODEL(PHY_ID_HISILICON_FESTAV300) },
+	{ PHY_ID_MATCH_MODEL(PHY_ID_HISILICON_FESTAV320) },
+	{ PHY_ID_MATCH_MODEL(PHY_ID_HISILICON_FESTAV330) },
+	{ PHY_ID_MATCH_MODEL(PHY_ID_HISILICON_FESTAV331) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, hisi_festa_tbl);
+MODULE_DESCRIPTION("HiSilicon Festa PHY driver");
+MODULE_LICENSE("Dual MIT/GPL");
-- 
2.39.2


             reply	other threads:[~2023-03-17 14:32 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-17 14:30 David Yang [this message]
2023-03-17 14:59 ` Heiner Kallweit
2023-03-17 15:29   ` Yangfl
2023-03-17 16:28   ` Francois Romieu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230317143042.291260-1-mmyangfl@gmail.com \
    --to=mmyangfl@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®