mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
To: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Heiko Stuebner <heiko@sntech.de>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Sebastian Reichel <sebastian.reichel@collabora.com>,
	Shreeya Patel <shreeya.patel@collabora.com>,
	Kever Yang <kever.yang@rock-chips.com>,
	Finley Xiao <finley.xiao@rock-chips.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	kernel@collabora.com
Subject: [PATCH 7/8] nvmem: rockchip-otp: Add support for RK3588
Date: Mon,  1 May 2023 11:43:59 +0300	[thread overview]
Message-ID: <20230501084401.765169-8-cristian.ciocaltea@collabora.com> (raw)
In-Reply-To: <20230501084401.765169-1-cristian.ciocaltea@collabora.com>

Add support for the OTP memory device found on the Rockchip RK3588 SoC.

While here, remove the unnecessary 'void *' casts in the OF device ID
table.

Co-developed-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 drivers/nvmem/rockchip-otp.c | 78 +++++++++++++++++++++++++++++++++++-
 1 file changed, 76 insertions(+), 2 deletions(-)

diff --git a/drivers/nvmem/rockchip-otp.c b/drivers/nvmem/rockchip-otp.c
index 4370d6c5e4e9..022691cadf94 100644
--- a/drivers/nvmem/rockchip-otp.c
+++ b/drivers/nvmem/rockchip-otp.c
@@ -54,6 +54,19 @@
 
 #define OTPC_TIMEOUT			10000
 
+/* RK3588 Register */
+#define RK3588_OTPC_AUTO_CTRL		0x04
+#define RK3588_OTPC_AUTO_EN		0x08
+#define RK3588_OTPC_INT_ST		0x84
+#define RK3588_OTPC_DOUT0		0x20
+#define RK3588_NO_SECURE_OFFSET		0x300
+#define RK3588_NBYTES			4
+#define RK3588_BURST_NUM		1
+#define RK3588_BURST_SHIFT		8
+#define RK3588_ADDR_SHIFT		16
+#define RK3588_AUTO_EN			BIT(0)
+#define RK3588_RD_DONE			BIT(1)
+
 struct rockchip_data {
 	int size;
 	const char * const *clocks;
@@ -171,6 +184,52 @@ static int px30_otp_read(void *context, unsigned int offset,
 	return ret;
 }
 
+static int rk3588_otp_read(void *context, unsigned int offset,
+			   void *val, size_t bytes)
+{
+	struct rockchip_otp *otp = context;
+	unsigned int addr_start, addr_end, addr_len;
+	int ret, i = 0;
+	u32 data;
+	u8 *buf;
+
+	addr_start = round_down(offset, RK3588_NBYTES) / RK3588_NBYTES;
+	addr_end = round_up(offset + bytes, RK3588_NBYTES) / RK3588_NBYTES;
+	addr_len = addr_end - addr_start;
+	addr_start += RK3588_NO_SECURE_OFFSET;
+
+	buf = kzalloc(array_size(addr_len, RK3588_NBYTES), GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	while (addr_len--) {
+		writel((addr_start << RK3588_ADDR_SHIFT) |
+		       (RK3588_BURST_NUM << RK3588_BURST_SHIFT),
+		       otp->base + RK3588_OTPC_AUTO_CTRL);
+		writel(RK3588_AUTO_EN, otp->base + RK3588_OTPC_AUTO_EN);
+
+		ret = rockchip_otp_wait_status(otp, RK3588_OTPC_INT_ST,
+					       RK3588_RD_DONE);
+		if (ret < 0) {
+			dev_err(otp->dev, "timeout during read setup\n");
+			goto read_end;
+		}
+
+		data = readl(otp->base + RK3588_OTPC_DOUT0);
+		memcpy(&buf[i], &data, RK3588_NBYTES);
+
+		i += RK3588_NBYTES;
+		addr_start++;
+	}
+
+	memcpy(val, buf + offset % RK3588_NBYTES, bytes);
+
+read_end:
+	kfree(buf);
+
+	return ret;
+}
+
 static int rockchip_otp_read(void *context, unsigned int offset,
 			     void *val, size_t bytes)
 {
@@ -213,14 +272,29 @@ static const struct rockchip_data px30_data = {
 	.reg_read = px30_otp_read,
 };
 
+static const char * const rk3588_otp_clocks[] = {
+	"otpc", "apb", "arb", "phy",
+};
+
+static const struct rockchip_data rk3588_data = {
+	.size = 0x400,
+	.clocks = rk3588_otp_clocks,
+	.num_clks = ARRAY_SIZE(rk3588_otp_clocks),
+	.reg_read = rk3588_otp_read,
+};
+
 static const struct of_device_id rockchip_otp_match[] = {
 	{
 		.compatible = "rockchip,px30-otp",
-		.data = (void *)&px30_data,
+		.data = &px30_data,
 	},
 	{
 		.compatible = "rockchip,rk3308-otp",
-		.data = (void *)&px30_data,
+		.data = &px30_data,
+	},
+	{
+		.compatible = "rockchip,rk3588-otp",
+		.data = &rk3588_data,
 	},
 	{ /* sentinel */ },
 };
-- 
2.40.0


  parent reply	other threads:[~2023-05-01  8:44 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-01  8:43 [PATCH 0/8] Add RK3588 OTP memory support Cristian Ciocaltea
2023-05-01  8:43 ` [PATCH 1/8] dt-bindings: nvmem: Convert rockchip-otp.txt to dt-schema Cristian Ciocaltea
2023-05-02  8:38   ` Heiko Stübner
2023-05-03  6:27   ` Krzysztof Kozlowski
2023-05-01  8:43 ` [PATCH 2/8] dt-bindings: nvmem: rockchip-otp: Add compatible for RK3588 Cristian Ciocaltea
2023-05-02  8:42   ` Heiko Stübner
2023-05-02 12:46     ` Cristian Ciocaltea
2023-05-03  6:28   ` Krzysztof Kozlowski
2023-05-04 14:14     ` Cristian Ciocaltea
2023-05-04 14:39       ` Krzysztof Kozlowski
2023-05-01  8:43 ` [PATCH 3/8] nvmem: rockchip-otp: Add clocks and reg_read to rockchip_data Cristian Ciocaltea
2023-05-02  8:47   ` Heiko Stübner
2023-05-02 12:49     ` Cristian Ciocaltea
2023-05-01  8:43 ` [PATCH 4/8] nvmem: rockchip-otp: Generalize rockchip_otp_wait_status() Cristian Ciocaltea
2023-05-02  8:48   ` Heiko Stübner
2023-05-01  8:43 ` [PATCH 5/8] nvmem: rockchip-otp: Use devm_reset_control_array_get_exclusive() Cristian Ciocaltea
2023-05-02  8:51   ` Heiko Stübner
2023-05-01  8:43 ` [PATCH 6/8] nvmem: rockchip-otp: Improve probe error handling Cristian Ciocaltea
2023-05-02  8:52   ` Heiko Stübner
2023-05-01  8:43 ` Cristian Ciocaltea [this message]
2023-05-02  8:55   ` [PATCH 7/8] nvmem: rockchip-otp: Add support for RK3588 Heiko Stübner
2023-05-01  8:44 ` [PATCH 8/8] arm64: dts: rockchip: Add rk3588 OTP node Cristian Ciocaltea
2023-05-02  8:57   ` Heiko Stübner
2023-05-02  8:26 ` [PATCH 0/8] Add RK3588 OTP memory support Vincent Legoll
2023-05-02 12:40   ` Cristian Ciocaltea

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230501084401.765169-8-cristian.ciocaltea@collabora.com \
    --to=cristian.ciocaltea@collabora.com \
    --cc=devicetree@vger.kernel.org \
    --cc=finley.xiao@rock-chips.com \
    --cc=heiko@sntech.de \
    --cc=kernel@collabora.com \
    --cc=kever.yang@rock-chips.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=sebastian.reichel@collabora.com \
    --cc=shreeya.patel@collabora.com \
    --cc=srinivas.kandagatla@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®