[PATCH AUTOSEL 5.10 1/8] btrfs: abort transaction when sibling keys check fails for leaves

[PATCH AUTOSEL 5.10 1/8] btrfs: abort transaction when sibling keys check fails for leaves

[Sasha Levin]

From: Filipe Manana <fdmanana@suse.com>

[ Upstream commit 9ae5afd02a03d4e22a17a9609b19400b77c36273 ]

If the sibling keys check fails before we move keys from one sibling
leaf to another, we are not aborting the transaction - we leave that to
some higher level caller of btrfs_search_slot() (or anything else that
uses it to insert items into a b+tree).

This means that the transaction abort will provide a stack trace that
omits the b+tree modification call chain. So change this to immediately
abort the transaction and therefore get a more useful stack trace that
shows us the call chain in the bt+tree modification code.

It's also important to immediately abort the transaction just in case
some higher level caller is not doing it, as this indicates a very
serious corruption and we should stop the possibility of doing further
damage.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/ctree.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index 3e55245e54e7c..41a7ace9998e4 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -3872,6 +3872,7 @@ static int push_leaf_right(struct btrfs_trans_handle *trans, struct btrfs_root
 
 	if (check_sibling_keys(left, right)) {
 		ret = -EUCLEAN;
+		btrfs_abort_transaction(trans, ret);
 		btrfs_tree_unlock(right);
 		free_extent_buffer(right);
 		return ret;
@@ -4116,6 +4117,7 @@ static int push_leaf_left(struct btrfs_trans_handle *trans, struct btrfs_root
 
 	if (check_sibling_keys(left, right)) {
 		ret = -EUCLEAN;
+		btrfs_abort_transaction(trans, ret);
 		goto out;
 	}
 	return __push_leaf_left(path, min_data_size,
-- 
2.39.2

[PATCH AUTOSEL 5.10 2/8] ARM: 9295/1: unwind:fix unwind abort for uleb128 case

[Sasha Levin]

From: Haibo Li <haibo.li@mediatek.com>

[ Upstream commit fa3eeb638de0c1a9d2d860e5b48259facdd65176 ]

When unwind instruction is 0xb2,the subsequent instructions
are uleb128 bytes.
For now,it uses only the first uleb128 byte in code.

For vsp increments of 0x204~0x400,use one uleb128 byte like below:
0xc06a00e4 <unwind_test_work>: 0x80b27fac
  Compact model index: 0
  0xb2 0x7f vsp = vsp + 1024
  0xac      pop {r4, r5, r6, r7, r8, r14}

For vsp increments larger than 0x400,use two uleb128 bytes like below:
0xc06a00e4 <unwind_test_work>: @0xc0cc9e0c
  Compact model index: 1
  0xb2 0x81 0x01 vsp = vsp + 1032
  0xac      pop {r4, r5, r6, r7, r8, r14}
The unwind works well since the decoded uleb128 byte is also 0x81.

For vsp increments larger than 0x600,use two uleb128 bytes like below:
0xc06a00e4 <unwind_test_work>: @0xc0cc9e0c
  Compact model index: 1
  0xb2 0x81 0x02 vsp = vsp + 1544
  0xac      pop {r4, r5, r6, r7, r8, r14}
In this case,the decoded uleb128 result is 0x101(vsp=0x204+(0x101<<2)).
While the uleb128 used in code is 0x81(vsp=0x204+(0x81<<2)).
The unwind aborts at this frame since it gets incorrect vsp.

To fix this,add uleb128 decode to cover all the above case.

Signed-off-by: Haibo Li <haibo.li@mediatek.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/kernel/unwind.c | 25 ++++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)

diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index d2bd0df2318d6..7e90f17a0676c 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -300,6 +300,29 @@ static int unwind_exec_pop_subset_r0_to_r3(struct unwind_ctrl_block *ctrl,
 	return URC_OK;
 }
 
+static unsigned long unwind_decode_uleb128(struct unwind_ctrl_block *ctrl)
+{
+	unsigned long bytes = 0;
+	unsigned long insn;
+	unsigned long result = 0;
+
+	/*
+	 * unwind_get_byte() will advance `ctrl` one instruction at a time, so
+	 * loop until we get an instruction byte where bit 7 is not set.
+	 *
+	 * Note: This decodes a maximum of 4 bytes to output 28 bits data where
+	 * max is 0xfffffff: that will cover a vsp increment of 1073742336, hence
+	 * it is sufficient for unwinding the stack.
+	 */
+	do {
+		insn = unwind_get_byte(ctrl);
+		result |= (insn & 0x7f) << (bytes * 7);
+		bytes++;
+	} while (!!(insn & 0x80) && (bytes != sizeof(result)));
+
+	return result;
+}
+
 /*
  * Execute the current unwind instruction.
  */
@@ -353,7 +376,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 		if (ret)
 			goto error;
 	} else if (insn == 0xb2) {
-		unsigned long uleb128 = unwind_get_byte(ctrl);
+		unsigned long uleb128 = unwind_decode_uleb128(ctrl);
 
 		ctrl->vrs[SP] += 0x204 + (uleb128 << 2);
 	} else {
-- 
2.39.2

[PATCH AUTOSEL 5.10 3/8] media: rcar-vin: Select correct interrupt mode for V4L2_FIELD_ALTERNATE

[Sasha Levin]

From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

[ Upstream commit e10707d5865c90d3dfe4ef589ce02ff4287fef85 ]

When adding proper support for V4L2_FIELD_ALTERNATE it was missed that
this field format should trigger an interrupt for each field, not just
for the whole frame. Fix this by marking it as progressive in the
capture setup, which will then select the correct interrupt mode.

Tested on both Gen2 and Gen3 with the result of a doubling of the frame
rate for V4L2_FIELD_ALTERNATE. From a PAL video source the frame rate is
now 50, which is expected for alternate field capture.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/rcar-vin/rcar-dma.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index 692dea300b0de..63c61c704446b 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -645,11 +645,9 @@ static int rvin_setup(struct rvin_dev *vin)
 	case V4L2_FIELD_SEQ_TB:
 	case V4L2_FIELD_SEQ_BT:
 	case V4L2_FIELD_NONE:
-		vnmc = VNMC_IM_ODD_EVEN;
-		progressive = true;
-		break;
 	case V4L2_FIELD_ALTERNATE:
 		vnmc = VNMC_IM_ODD_EVEN;
+		progressive = true;
 		break;
 	default:
 		vnmc = VNMC_IM_ODD;
-- 
2.39.2

[PATCH AUTOSEL 5.10 4/8] gfs2: Don't deref jdesc in evict

[Sasha Levin]

From: Bob Peterson <rpeterso@redhat.com>

[ Upstream commit 504a10d9e46bc37b23d0a1ae2f28973c8516e636 ]

On corrupt gfs2 file systems the evict code can try to reference the
journal descriptor structure, jdesc, after it has been freed and set to
NULL. The sequence of events is:

init_journal()
...
fail_jindex:
   gfs2_jindex_free(sdp); <------frees journals, sets jdesc = NULL
      if (gfs2_holder_initialized(&ji_gh))
         gfs2_glock_dq_uninit(&ji_gh);
fail:
   iput(sdp->sd_jindex); <--references jdesc in evict_linked_inode
      evict()
         gfs2_evict_inode()
            evict_linked_inode()
               ret = gfs2_trans_begin(sdp, 0, sdp->sd_jdesc->jd_blocks);
<------references the now freed/zeroed sd_jdesc pointer.

The call to gfs2_trans_begin is done because the truncate_inode_pages
call can cause gfs2 events that require a transaction, such as removing
journaled data (jdata) blocks from the journal.

This patch fixes the problem by adding a check for sdp->sd_jdesc to
function gfs2_evict_inode. In theory, this should only happen to corrupt
gfs2 file systems, when gfs2 detects the problem, reports it, then tries
to evict all the system inodes it has read in up to that point.

Reported-by: Yang Lan <lanyang0908@gmail.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/super.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index 5cb7e771b57ab..e01b6a2d12d30 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -1416,6 +1416,14 @@ static void gfs2_evict_inode(struct inode *inode)
 	if (inode->i_nlink || sb_rdonly(sb))
 		goto out;
 
+	/*
+	 * In case of an incomplete mount, gfs2_evict_inode() may be called for
+	 * system files without having an active journal to write to.  In that
+	 * case, skip the filesystem evict.
+	 */
+	if (!sdp->sd_jdesc)
+		goto out;
+
 	gfs2_holder_mark_uninitialized(&gh);
 	ret = evict_should_delete(inode, &gh);
 	if (ret == SHOULD_DEFER_EVICTION)
-- 
2.39.2

[PATCH AUTOSEL 5.10 5/8] fbdev: modedb: Add 1920x1080 at 60 Hz video mode

[Sasha Levin]

From: Helge Deller <deller@gmx.de>

[ Upstream commit c8902258b2b8ecaa1b8d88c312853c5b14c2553d ]

Add typical resolution for Full-HD monitors.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/core/modedb.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/video/fbdev/core/modedb.c b/drivers/video/fbdev/core/modedb.c
index 6473e0dfe1464..e78ec7f728463 100644
--- a/drivers/video/fbdev/core/modedb.c
+++ b/drivers/video/fbdev/core/modedb.c
@@ -257,6 +257,11 @@ static const struct fb_videomode modedb[] = {
 	{ NULL, 72, 480, 300, 33386, 40, 24, 11, 19, 80, 3, 0,
 		FB_VMODE_DOUBLE },
 
+	/* 1920x1080 @ 60 Hz, 67.3 kHz hsync */
+	{ NULL, 60, 1920, 1080, 6734, 148, 88, 36, 4, 44, 5, 0,
+		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		FB_VMODE_NONINTERLACED },
+
 	/* 1920x1200 @ 60 Hz, 74.5 Khz hsync */
 	{ NULL, 60, 1920, 1200, 5177, 128, 336, 1, 38, 208, 3,
 		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-- 
2.39.2

[PATCH AUTOSEL 5.10 6/8] fbdev: stifb: Fix info entry in sti_struct on error path

[Sasha Levin]

From: Helge Deller <deller@gmx.de>

[ Upstream commit 0bdf1ad8d10bd4e50a8b1a2c53d15984165f7fea ]

Minor fix to reset the info field to NULL in case of error.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/stifb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/fbdev/stifb.c b/drivers/video/fbdev/stifb.c
index ef8a4c5fc6875..63f51783352dc 100644
--- a/drivers/video/fbdev/stifb.c
+++ b/drivers/video/fbdev/stifb.c
@@ -1413,6 +1413,7 @@ static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref)
 	iounmap(info->screen_base);
 out_err0:
 	kfree(fb);
+	sti->info = NULL;
 	return -ENXIO;
 }
 
-- 
2.39.2

[PATCH AUTOSEL 5.10 7/8] nbd: Fix debugfs_create_dir error checking

[Sasha Levin]

From: Ivan Orlov <ivan.orlov0322@gmail.com>

[ Upstream commit 4913cfcf014c95f0437db2df1734472fd3e15098 ]

The debugfs_create_dir function returns ERR_PTR in case of error, and the
only correct way to check if an error occurred is 'IS_ERR' inline function.
This patch will replace the null-comparison with IS_ERR.

Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230512130533.98709-1-ivan.orlov0322@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/nbd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index dbcd903ba128f..b6940f0a9c905 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -1624,7 +1624,7 @@ static int nbd_dev_dbg_init(struct nbd_device *nbd)
 		return -EIO;
 
 	dir = debugfs_create_dir(nbd_name(nbd), nbd_dbg_dir);
-	if (!dir) {
+	if (IS_ERR(dir)) {
 		dev_err(nbd_to_dev(nbd), "Failed to create debugfs dir for '%s'\n",
 			nbd_name(nbd));
 		return -EIO;
@@ -1650,7 +1650,7 @@ static int nbd_dbg_init(void)
 	struct dentry *dbg_dir;
 
 	dbg_dir = debugfs_create_dir("nbd", NULL);
-	if (!dbg_dir)
+	if (IS_ERR(dbg_dir))
 		return -EIO;
 
 	nbd_dbg_dir = dbg_dir;
-- 
2.39.2

[PATCH AUTOSEL 5.10 8/8] block/rnbd: replace REQ_OP_FLUSH with REQ_OP_WRITE

[Sasha Levin]

From: Guoqing Jiang <guoqing.jiang@linux.dev>

[ Upstream commit 5e6e08087a4acb4ee3574cea32dbff0f63c7f608 ]

Since flush bios are implemented as writes with no data and
the preflush flag per Christoph's comment [1].

And we need to change it in rnbd accordingly. Otherwise, I
got splatting when create fs from rnbd client.

[  464.028545] ------------[ cut here ]------------
[  464.028553] WARNING: CPU: 0 PID: 65 at block/blk-core.c:751 submit_bio_noacct+0x32c/0x5d0
[ ... ]
[  464.028668] CPU: 0 PID: 65 Comm: kworker/0:1H Tainted: G           OE      6.4.0-rc1 #9
[  464.028671] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
[  464.028673] Workqueue: ib-comp-wq ib_cq_poll_work [ib_core]
[  464.028717] RIP: 0010:submit_bio_noacct+0x32c/0x5d0
[  464.028720] Code: 03 0f 85 51 fe ff ff 48 8b 43 18 8b 88 04 03 00 00 85 c9 0f 85 3f fe ff ff e9 be fd ff ff 0f b6 d0 3c 0d 74 26 83 fa 01 74 21 <0f> 0b b8 0a 00 00 00 e9 56 fd ff ff 4c 89 e7 e8 70 a1 03 00 84 c0
[  464.028722] RSP: 0018:ffffaf3680b57c68 EFLAGS: 00010202
[  464.028724] RAX: 0000000000060802 RBX: ffffa09dcc18bf00 RCX: 0000000000000000
[  464.028726] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffffa09dde081d00
[  464.028727] RBP: ffffaf3680b57c98 R08: ffffa09dde081d00 R09: ffffa09e38327200
[  464.028729] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa09dde081d00
[  464.028730] R13: ffffa09dcb06e1e8 R14: 0000000000000000 R15: 0000000000200000
[  464.028733] FS:  0000000000000000(0000) GS:ffffa09e3bc00000(0000) knlGS:0000000000000000
[  464.028735] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  464.028736] CR2: 000055a4e8206c40 CR3: 0000000119f06000 CR4: 00000000003506f0
[  464.028738] Call Trace:
[  464.028740]  <TASK>
[  464.028746]  submit_bio+0x1b/0x80
[  464.028748]  rnbd_srv_rdma_ev+0x50d/0x10c0 [rnbd_server]
[  464.028754]  ? percpu_ref_get_many.constprop.0+0x55/0x140 [rtrs_server]
[  464.028760]  ? __this_cpu_preempt_check+0x13/0x20
[  464.028769]  process_io_req+0x1dc/0x450 [rtrs_server]
[  464.028775]  rtrs_srv_inv_rkey_done+0x67/0xb0 [rtrs_server]
[  464.028780]  __ib_process_cq+0xbc/0x1f0 [ib_core]
[  464.028793]  ib_cq_poll_work+0x2b/0xa0 [ib_core]
[  464.028804]  process_one_work+0x2a9/0x580

[1]. https://lore.kernel.org/all/ZFHgefWofVt24tRl@infradead.org/

Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230512034631.28686-1-guoqing.jiang@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/rnbd/rnbd-proto.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/block/rnbd/rnbd-proto.h b/drivers/block/rnbd/rnbd-proto.h
index ca166241452c2..cb11855455dde 100644
--- a/drivers/block/rnbd/rnbd-proto.h
+++ b/drivers/block/rnbd/rnbd-proto.h
@@ -234,7 +234,7 @@ static inline u32 rnbd_to_bio_flags(u32 rnbd_opf)
 		bio_opf = REQ_OP_WRITE;
 		break;
 	case RNBD_OP_FLUSH:
-		bio_opf = REQ_OP_FLUSH | REQ_PREFLUSH;
+		bio_opf = REQ_OP_WRITE | REQ_PREFLUSH;
 		break;
 	case RNBD_OP_DISCARD:
 		bio_opf = REQ_OP_DISCARD;
-- 
2.39.2