[PATCH] Revert "dt-bindings: bridge: samsung-dsim: Make some flags optional"

[PATCH] Revert "dt-bindings: bridge: samsung-dsim: Make some flags optional"

[Neil Armstrong]

This reverts commit cfaf76d349837f695c8aa6d7077847fec4231fe5 which was applied
without review due to a bad tool manipulation.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 .../devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml    | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
index 360fea81f4b6..9f61ebdfefa8 100644
--- a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
@@ -70,9 +70,7 @@ properties:
   samsung,burst-clock-frequency:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
-      DSIM high speed burst mode frequency when connected to devices
-      that support burst mode. If absent, the driver will use the pixel
-      clock from the attached device or bridge.
+      DSIM high speed burst mode frequency.
 
   samsung,esc-clock-frequency:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -82,8 +80,7 @@ properties:
   samsung,pll-clock-frequency:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
-      DSIM oscillator clock frequency. If absent, the driver will
-      use the clock frequency of sclk_mipi.
+      DSIM oscillator clock frequency.
 
   phys:
     maxItems: 1
@@ -137,7 +134,9 @@ required:
   - compatible
   - interrupts
   - reg
+  - samsung,burst-clock-frequency
   - samsung,esc-clock-frequency
+  - samsung,pll-clock-frequency
 
 allOf:
   - $ref: ../dsi-controller.yaml#

---
base-commit: cfaf76d349837f695c8aa6d7077847fec4231fe5
change-id: 20230526-revert-bad-binding-f77a3ca96419

Best regards,
-- 
Neil Armstrong <neil.armstrong@linaro.org>

Re: [PATCH] Revert "dt-bindings: bridge: samsung-dsim: Make some flags optional"

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 2220 bytes --]

On Fri, May 26, 2023 at 09:27:16AM +0200, Neil Armstrong wrote:
> This reverts commit cfaf76d349837f695c8aa6d7077847fec4231fe5 which was applied
> without review due to a bad tool manipulation.

Is it a dt-binding maintainer review that you are missing on that
patch?

For this one:
Acked-by: Conor Dooley <conor.dooley@microchip.com>

Thanks,
Conor.

> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
>  .../devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml    | 9 ++++-----
>  1 file changed, 4 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
> index 360fea81f4b6..9f61ebdfefa8 100644
> --- a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
> @@ -70,9 +70,7 @@ properties:
>    samsung,burst-clock-frequency:
>      $ref: /schemas/types.yaml#/definitions/uint32
>      description:
> -      DSIM high speed burst mode frequency when connected to devices
> -      that support burst mode. If absent, the driver will use the pixel
> -      clock from the attached device or bridge.
> +      DSIM high speed burst mode frequency.
>  
>    samsung,esc-clock-frequency:
>      $ref: /schemas/types.yaml#/definitions/uint32
> @@ -82,8 +80,7 @@ properties:
>    samsung,pll-clock-frequency:
>      $ref: /schemas/types.yaml#/definitions/uint32
>      description:
> -      DSIM oscillator clock frequency. If absent, the driver will
> -      use the clock frequency of sclk_mipi.
> +      DSIM oscillator clock frequency.
>  
>    phys:
>      maxItems: 1
> @@ -137,7 +134,9 @@ required:
>    - compatible
>    - interrupts
>    - reg
> +  - samsung,burst-clock-frequency
>    - samsung,esc-clock-frequency
> +  - samsung,pll-clock-frequency
>  
>  allOf:
>    - $ref: ../dsi-controller.yaml#
> 
> ---
> base-commit: cfaf76d349837f695c8aa6d7077847fec4231fe5
> change-id: 20230526-revert-bad-binding-f77a3ca96419
> 
> Best regards,
> -- 
> Neil Armstrong <neil.armstrong@linaro.org>
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH] Revert "dt-bindings: bridge: samsung-dsim: Make some flags optional"

[Neil Armstrong]

On 26/05/2023 10:02, Conor Dooley wrote:
> On Fri, May 26, 2023 at 09:27:16AM +0200, Neil Armstrong wrote:
>> This reverts commit cfaf76d349837f695c8aa6d7077847fec4231fe5 which was applied
>> without review due to a bad tool manipulation.
> 
> Is it a dt-binding maintainer review that you are missing on that
> patch?

Exact

> 
> For this one:
> Acked-by: Conor Dooley <conor.dooley@microchip.com>

Thanks, I'll apply this revert now and wait until the original
bindings patch gets properly reviewed.

Thanks,
Neil

> 
> Thanks,
> Conor.
> 
>>
>> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
>> ---
>>   .../devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml    | 9 ++++-----
>>   1 file changed, 4 insertions(+), 5 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
>> index 360fea81f4b6..9f61ebdfefa8 100644
>> --- a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
>> +++ b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
>> @@ -70,9 +70,7 @@ properties:
>>     samsung,burst-clock-frequency:
>>       $ref: /schemas/types.yaml#/definitions/uint32
>>       description:
>> -      DSIM high speed burst mode frequency when connected to devices
>> -      that support burst mode. If absent, the driver will use the pixel
>> -      clock from the attached device or bridge.
>> +      DSIM high speed burst mode frequency.
>>   
>>     samsung,esc-clock-frequency:
>>       $ref: /schemas/types.yaml#/definitions/uint32
>> @@ -82,8 +80,7 @@ properties:
>>     samsung,pll-clock-frequency:
>>       $ref: /schemas/types.yaml#/definitions/uint32
>>       description:
>> -      DSIM oscillator clock frequency. If absent, the driver will
>> -      use the clock frequency of sclk_mipi.
>> +      DSIM oscillator clock frequency.
>>   
>>     phys:
>>       maxItems: 1
>> @@ -137,7 +134,9 @@ required:
>>     - compatible
>>     - interrupts
>>     - reg
>> +  - samsung,burst-clock-frequency
>>     - samsung,esc-clock-frequency
>> +  - samsung,pll-clock-frequency
>>   
>>   allOf:
>>     - $ref: ../dsi-controller.yaml#
>>
>> ---
>> base-commit: cfaf76d349837f695c8aa6d7077847fec4231fe5
>> change-id: 20230526-revert-bad-binding-f77a3ca96419
>>
>> Best regards,
>> -- 
>> Neil Armstrong <neil.armstrong@linaro.org>
>>

Re: [PATCH] Revert "dt-bindings: bridge: samsung-dsim: Make some flags optional"

[Neil Armstrong]

Hi,

On Fri, 26 May 2023 09:27:16 +0200, Neil Armstrong wrote:
> This reverts commit cfaf76d349837f695c8aa6d7077847fec4231fe5 which was applied
> without review due to a bad tool manipulation.
> 
> 

Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)

[1/1] Revert "dt-bindings: bridge: samsung-dsim: Make some flags optional"
      https://cgit.freedesktop.org/drm/drm-misc/commit/?id=35070674f488eefaeb753a13df11199d10328ff8

-- 
Neil