From: Baokun Li <libaokun1@huawei.com>
To: <jack@suse.cz>
Cc: <linux-fsdevel@vger.kernel.org>, <linux-ext4@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <yi.zhang@huawei.com>,
<yangerkun@huawei.com>, <chengzhihao1@huawei.com>,
<yukuai3@huawei.com>, <libaokun1@huawei.com>
Subject: [PATCH v2 4/7] quota: add new helper dquot_active()
Date: Wed, 28 Jun 2023 21:21:52 +0800 [thread overview]
Message-ID: <20230628132155.1560425-5-libaokun1@huawei.com> (raw)
In-Reply-To: <20230628132155.1560425-1-libaokun1@huawei.com>
Add new helper function dquot_active() to make the code more concise.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
---
fs/quota/dquot.c | 23 ++++++++++++++---------
1 file changed, 14 insertions(+), 9 deletions(-)
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index b21f5e888482..09787e4f6a00 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -353,6 +353,11 @@ static void wait_on_dquot(struct dquot *dquot)
mutex_unlock(&dquot->dq_lock);
}
+static inline int dquot_active(struct dquot *dquot)
+{
+ return test_bit(DQ_ACTIVE_B, &dquot->dq_flags);
+}
+
static inline int dquot_dirty(struct dquot *dquot)
{
return test_bit(DQ_MOD_B, &dquot->dq_flags);
@@ -368,14 +373,14 @@ int dquot_mark_dquot_dirty(struct dquot *dquot)
{
int ret = 1;
- if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags))
+ if (!dquot_active(dquot))
return 0;
if (sb_dqopt(dquot->dq_sb)->flags & DQUOT_NOLIST_DIRTY)
return test_and_set_bit(DQ_MOD_B, &dquot->dq_flags);
/* If quota is dirty already, we don't have to acquire dq_list_lock */
- if (test_bit(DQ_MOD_B, &dquot->dq_flags))
+ if (dquot_dirty(dquot))
return 1;
spin_lock(&dq_list_lock);
@@ -457,7 +462,7 @@ int dquot_acquire(struct dquot *dquot)
smp_mb__before_atomic();
set_bit(DQ_READ_B, &dquot->dq_flags);
/* Instantiate dquot if needed */
- if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags) && !dquot->dq_off) {
+ if (!dquot_active(dquot) && !dquot->dq_off) {
ret = dqopt->ops[dquot->dq_id.type]->commit_dqblk(dquot);
/* Write the info if needed */
if (info_dirty(&dqopt->info[dquot->dq_id.type])) {
@@ -499,7 +504,7 @@ int dquot_commit(struct dquot *dquot)
goto out_lock;
/* Inactive dquot can be only if there was error during read/init
* => we have better not writing it */
- if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags))
+ if (dquot_active(dquot))
ret = dqopt->ops[dquot->dq_id.type]->commit_dqblk(dquot);
else
ret = -EIO;
@@ -614,7 +619,7 @@ int dquot_scan_active(struct super_block *sb,
spin_lock(&dq_list_lock);
list_for_each_entry(dquot, &inuse_list, dq_inuse) {
- if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags))
+ if (!dquot_active(dquot))
continue;
if (dquot->dq_sb != sb)
continue;
@@ -629,7 +634,7 @@ int dquot_scan_active(struct super_block *sb,
* outstanding call and recheck the DQ_ACTIVE_B after that.
*/
wait_on_dquot(dquot);
- if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) {
+ if (dquot_active(dquot)) {
ret = fn(dquot, priv);
if (ret < 0)
goto out;
@@ -680,7 +685,7 @@ int dquot_writeback_dquots(struct super_block *sb, int type)
dquot = list_first_entry(&dirty, struct dquot,
dq_dirty);
- WARN_ON(!test_bit(DQ_ACTIVE_B, &dquot->dq_flags));
+ WARN_ON(!dquot_active(dquot));
/* Now we have active dquot from which someone is
* holding reference so we can safely just increase
@@ -817,7 +822,7 @@ void dqput(struct dquot *dquot)
dquot_write_dquot(dquot);
goto we_slept;
}
- if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) {
+ if (dquot_active(dquot)) {
spin_unlock(&dq_list_lock);
dquot->dq_sb->dq_op->release_dquot(dquot);
goto we_slept;
@@ -918,7 +923,7 @@ struct dquot *dqget(struct super_block *sb, struct kqid qid)
* already finished or it will be canceled due to dq_count > 1 test */
wait_on_dquot(dquot);
/* Read the dquot / allocate space in quota file */
- if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) {
+ if (!dquot_active(dquot)) {
int err;
err = sb->dq_op->acquire_dquot(dquot);
--
2.31.1
next prev parent reply other threads:[~2023-06-28 13:25 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-28 13:21 [PATCH v2 0/7] quota: fix race condition between dqput() and dquot_mark_dquot_dirty() Baokun Li
2023-06-28 13:21 ` [PATCH v2 1/7] quota: factor out dquot_write_dquot() Baokun Li
2023-06-28 13:21 ` [PATCH v2 2/7] quota: add new global dquot list releasing_dquots Baokun Li
2023-06-29 10:29 ` Jan Kara
2023-06-29 11:10 ` Baokun Li
2023-06-28 13:21 ` [PATCH v2 3/7] quota: rename dquot_active() to inode_dquot_active() Baokun Li
2023-06-29 10:24 ` Jan Kara
2023-06-29 11:14 ` Baokun Li
2023-06-28 13:21 ` Baokun Li [this message]
2023-06-28 13:21 ` [PATCH v2 5/7] quota: fix dqput() to follow the guarantees dquot_srcu should provide Baokun Li
2023-06-29 10:59 ` Jan Kara
2023-06-29 11:47 ` Baokun Li
2023-06-29 14:33 ` Jan Kara
2023-06-30 7:45 ` Baokun Li
2023-06-28 13:21 ` [PATCH v2 6/7] quota: simplify drop_dquot_ref() Baokun Li
2023-06-29 11:08 ` Jan Kara
2023-06-29 12:13 ` Baokun Li
2023-06-29 14:09 ` Jan Kara
2023-06-29 14:16 ` Baokun Li
2023-06-28 13:21 ` [PATCH v2 7/7] quota: remove unused function put_dquot_list() Baokun Li
2023-06-29 11:05 ` Jan Kara
2023-06-29 12:18 ` Baokun Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230628132155.1560425-5-libaokun1@huawei.com \
--to=libaokun1@huawei.com \
--cc=chengzhihao1@huawei.com \
--cc=jack@suse.cz \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=yangerkun@huawei.com \
--cc=yi.zhang@huawei.com \
--cc=yukuai3@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®