mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Mario Limonciello <mario.limonciello@amd.com>
To: Natikar Basavaraj <Basavaraj.Natikar@amd.com>,
	S-k Shyam-sundar <Shyam-sundar.S-k@amd.com>,
	<linus.walleij@linaro.org>
Cc: <andriy.shevchenko@linux.intel.com>, <npliashechnikov@gmail.com>,
	<nmschulte@gmail.com>, <friedrich.vock@gmx.de>,
	<dridri85@gmail.com>, "Hans de Goede" <hdegoede@redhat.com>,
	open list <linux-kernel@vger.kernel.org>,
	"open list" <linux-gpio@vger.kernel.org>,
	Mario Limonciello <mario.limonciello@amd.com>
Subject: [PATCH v2 2/4] pinctrl: amd: Use amd_pinconf_set() for all config options
Date: Wed, 5 Jul 2023 08:30:03 -0500	[thread overview]
Message-ID: <20230705133005.577-3-mario.limonciello@amd.com> (raw)
In-Reply-To: <20230705133005.577-1-mario.limonciello@amd.com>

On ASUS TUF A16 it is reported that the ITE5570 ACPI device connected to
GPIO 7 is causing an interrupt storm.  This issue doesn't happen on
Windows.

Comparing the GPIO register configuration between Windows and Linux
bit 20 has been configured as a pull up on Windows, but not on Linux.
Checking GPIO declaration from the firmware it is clear it *should* have
been a pull up on Linux as well.

```
GpioInt (Level, ActiveLow, Exclusive, PullUp, 0x0000,
	 "\\_SB.GPIO", 0x00, ResourceConsumer, ,)
{   // Pin list
0x0007
}
```

On Linux amd_gpio_set_config() is currently only used for programming
the debounce. Actually the GPIO core calls it with all the arguments
that are supported by a GPIO, pinctrl-amd just responds `-ENOTSUPP`.

To solve this issue expand amd_gpio_set_config() to support the other
arguments amd_pinconf_set() supports, namely `PIN_CONFIG_BIAS_PULL_DOWN`,
`PIN_CONFIG_BIAS_PULL_UP`, and `PIN_CONFIG_DRIVE_STRENGTH`.

Reported-by: Nik P <npliashechnikov@gmail.com>
Reported-by: Nathan Schulte <nmschulte@gmail.com>
Reported-by: Friedrich Vock <friedrich.vock@gmx.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217336
Reported-by: dridri85@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217493
Link: https://lore.kernel.org/linux-input/20230530154058.17594-1-friedrich.vock@gmx.de/
Fixes: 2956b5d94a76 ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
v1->v2:
 * Adjust commit message alignment
 * Move earlier in the series
---
 drivers/pinctrl/pinctrl-amd.c | 28 +++++++++++++++-------------
 1 file changed, 15 insertions(+), 13 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c
index 02d9f9f245707..eeaf80fdc13a2 100644
--- a/drivers/pinctrl/pinctrl-amd.c
+++ b/drivers/pinctrl/pinctrl-amd.c
@@ -188,18 +188,6 @@ static int amd_gpio_set_debounce(struct gpio_chip *gc, unsigned offset,
 	return ret;
 }
 
-static int amd_gpio_set_config(struct gpio_chip *gc, unsigned offset,
-			       unsigned long config)
-{
-	u32 debounce;
-
-	if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
-		return -ENOTSUPP;
-
-	debounce = pinconf_to_config_argument(config);
-	return amd_gpio_set_debounce(gc, offset, debounce);
-}
-
 #ifdef CONFIG_DEBUG_FS
 static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
 {
@@ -782,7 +770,7 @@ static int amd_pinconf_get(struct pinctrl_dev *pctldev,
 }
 
 static int amd_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
-				unsigned long *configs, unsigned num_configs)
+			   unsigned long *configs, unsigned int num_configs)
 {
 	int i;
 	u32 arg;
@@ -872,6 +860,20 @@ static int amd_pinconf_group_set(struct pinctrl_dev *pctldev,
 	return 0;
 }
 
+static int amd_gpio_set_config(struct gpio_chip *gc, unsigned int pin,
+			       unsigned long config)
+{
+	struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
+
+	if (pinconf_to_config_param(config) == PIN_CONFIG_INPUT_DEBOUNCE) {
+		u32 debounce = pinconf_to_config_argument(config);
+
+		return amd_gpio_set_debounce(gc, pin, debounce);
+	}
+
+	return amd_pinconf_set(gpio_dev->pctrl, pin, &config, 1);
+}
+
 static const struct pinconf_ops amd_pinconf_ops = {
 	.pin_config_get		= amd_pinconf_get,
 	.pin_config_set		= amd_pinconf_set,
-- 
2.34.1


  parent reply	other threads:[~2023-07-05 13:31 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-05 13:30 [PATCH v2 0/4] Fix for interrupt storm on ASUS TUF A16 Mario Limonciello
2023-07-05 13:30 ` [PATCH v2 1/4] pinctrl: amd: Only use special debounce behavior for GPIO 0 Mario Limonciello
2023-07-05 13:30 ` Mario Limonciello [this message]
2023-07-06  9:16   ` [PATCH v2 2/4] pinctrl: amd: Use amd_pinconf_set() for all config options Andy Shevchenko
2023-07-06 14:30     ` Limonciello, Mario
2023-07-05 13:30 ` [PATCH v2 3/4] pinctrl: amd: Drop pull up select configuration Mario Limonciello
2023-07-05 13:30 ` [PATCH v2 4/4] pinctrl: amd: Unify debounce handling into amd_pinconf_set() Mario Limonciello
2023-07-07 13:50 ` [PATCH v2 0/4] Fix for interrupt storm on ASUS TUF A16 Linus Walleij
2023-07-07 14:09   ` Limonciello, Mario
2023-07-10 17:49     ` Jan Visser

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230705133005.577-3-mario.limonciello@amd.com \
    --to=mario.limonciello@amd.com \
    --cc=Basavaraj.Natikar@amd.com \
    --cc=Shyam-sundar.S-k@amd.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=dridri85@gmail.com \
    --cc=friedrich.vock@gmx.de \
    --cc=hdegoede@redhat.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nmschulte@gmail.com \
    --cc=npliashechnikov@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®