From: Thomas Gleixner <tglx@linutronix.de>
To: LKML <linux-kernel@vger.kernel.org>
Cc: x86@kernel.org, Linus Torvalds <torvalds@linux-foundation.org>,
Andrew Cooper <andrew.cooper3@citrix.com>,
Tom Lendacky <thomas.lendacky@amd.com>,
Paolo Bonzini <pbonzini@redhat.com>, Wei Liu <wei.liu@kernel.org>,
Arjan van de Ven <arjan@linux.intel.com>,
Juergen Gross <jgross@suse.com>
Subject: [patch 27/58] x86/apic: Nuke empty init_apic_ldr() callbacks
Date: Tue, 18 Jul 2023 01:15:16 +0200 (CEST) [thread overview]
Message-ID: <20230717223224.682027281@linutronix.de> (raw)
In-Reply-To: <20230717223049.327865981@linutronix.de>
apic::init_apic_ldr() is only invoked when the APIC is initialized. So
there is really no point in having:
- Default empty callbacks all over the place
- Two implementations of the actual LDR init function where one is
just unreadable gunk but does exactly the same as the other.
Make the apic::init_apic_ldr() invocation conditional, remove the empty
callbacks and consolidate the two implementation into one.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/include/asm/apic.h | 2 --
arch/x86/kernel/apic/apic.c | 7 +++++--
arch/x86/kernel/apic/apic_common.c | 16 ++++++++++++++++
arch/x86/kernel/apic/apic_flat_64.c | 32 +-------------------------------
arch/x86/kernel/apic/apic_noop.c | 2 --
arch/x86/kernel/apic/apic_numachip.c | 2 --
arch/x86/kernel/apic/bigsmp_32.c | 9 ---------
arch/x86/kernel/apic/local.h | 5 ++---
arch/x86/kernel/apic/probe_32.c | 15 ---------------
arch/x86/kernel/apic/x2apic_phys.c | 5 -----
arch/x86/kernel/apic/x2apic_uv_x.c | 5 -----
arch/x86/xen/apic.c | 1 -
12 files changed, 24 insertions(+), 77 deletions(-)
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -445,8 +445,6 @@ extern void generic_bigsmp_probe(void);
#include <asm/smp.h>
-#define APIC_DFR_VALUE (APIC_DFR_FLAT)
-
extern struct apic apic_noop;
static inline unsigned int read_apic_id(void)
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1578,9 +1578,12 @@ static void setup_local_APIC(void)
/*
* Intel recommends to set DFR, LDR and TPR before enabling
* an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116). So here it goes...
+ * document number 292116).
+ *
+ * Except for APICs which operate in physical destination mode.
*/
- apic->init_apic_ldr();
+ if (apic->init_apic_ldr)
+ apic->init_apic_ldr();
/*
* Set Task Priority to 'accept all except vectors 0-31'. An APIC
--- a/arch/x86/kernel/apic/apic_common.c
+++ b/arch/x86/kernel/apic/apic_common.c
@@ -6,6 +6,8 @@
#include <linux/irq.h>
#include <asm/apic.h>
+#include "local.h"
+
u32 apic_default_calc_apicid(unsigned int cpu)
{
return per_cpu(x86_cpu_to_apicid, cpu);
@@ -39,3 +41,17 @@ int default_apic_id_valid(u32 apicid)
{
return (apicid < 255);
}
+
+/*
+ * Set up the logical destination ID when the APIC operates in logical
+ * destination mode.
+ */
+void default_init_apic_ldr(void)
+{
+ unsigned long val;
+
+ apic_write(APIC_DFR, APIC_DFR_FLAT);
+ val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+ val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
+ apic_write(APIC_LDR, val);
+}
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -28,26 +28,6 @@ static int flat_acpi_madt_oem_check(char
return 1;
}
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LDR and TPR before enabling
- * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116). So here it goes...
- */
-void flat_init_apic_ldr(void)
-{
- unsigned long val;
- unsigned long num, id;
-
- num = smp_processor_id();
- id = 1UL << num;
- apic_write(APIC_DFR, APIC_DFR_FLAT);
- val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
- val |= SET_APIC_LOGICAL_ID(id);
- apic_write(APIC_LDR, val);
-}
-
static void _flat_send_IPI_mask(unsigned long mask, int vector)
{
unsigned long flags;
@@ -119,7 +99,7 @@ static struct apic apic_flat __ro_after_
.disable_esr = 0,
.check_apicid_used = NULL,
- .init_apic_ldr = flat_init_apic_ldr,
+ .init_apic_ldr = default_init_apic_ldr,
.ioapic_phys_id_map = NULL,
.setup_apic_routing = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
@@ -175,15 +155,6 @@ static int physflat_acpi_madt_oem_check(
return 0;
}
-static void physflat_init_apic_ldr(void)
-{
- /*
- * LDR and DFR are not involved in physflat mode, rather:
- * "In physical destination mode, the destination processor is
- * specified by its local APIC ID [...]." (Intel SDM, 10.6.2.1)
- */
-}
-
static int physflat_probe(void)
{
if (apic == &apic_physflat || num_possible_cpus() > 8 ||
@@ -207,7 +178,6 @@ static struct apic apic_physflat __ro_af
.disable_esr = 0,
.check_apicid_used = NULL,
- .init_apic_ldr = physflat_init_apic_ldr,
.ioapic_phys_id_map = NULL,
.setup_apic_routing = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
--- a/arch/x86/kernel/apic/apic_noop.c
+++ b/arch/x86/kernel/apic/apic_noop.c
@@ -14,7 +14,6 @@
#include <asm/apic.h>
-static void noop_init_apic_ldr(void) { }
static void noop_send_IPI(int cpu, int vector) { }
static void noop_send_IPI_mask(const struct cpumask *cpumask, int vector) { }
static void noop_send_IPI_mask_allbutself(const struct cpumask *cpumask, int vector) { }
@@ -94,7 +93,6 @@ struct apic apic_noop __ro_after_init =
.disable_esr = 0,
.check_apicid_used = default_check_apicid_used,
- .init_apic_ldr = noop_init_apic_ldr,
.ioapic_phys_id_map = default_ioapic_phys_id_map,
.setup_apic_routing = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
--- a/arch/x86/kernel/apic/apic_numachip.c
+++ b/arch/x86/kernel/apic/apic_numachip.c
@@ -252,7 +252,6 @@ static const struct apic apic_numachip1
.disable_esr = 0,
.check_apicid_used = NULL,
- .init_apic_ldr = flat_init_apic_ldr,
.ioapic_phys_id_map = NULL,
.setup_apic_routing = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
@@ -297,7 +296,6 @@ static const struct apic apic_numachip2
.disable_esr = 0,
.check_apicid_used = NULL,
- .init_apic_ldr = flat_init_apic_ldr,
.ioapic_phys_id_map = NULL,
.setup_apic_routing = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
--- a/arch/x86/kernel/apic/bigsmp_32.c
+++ b/arch/x86/kernel/apic/bigsmp_32.c
@@ -28,14 +28,6 @@ static bool bigsmp_check_apicid_used(phy
return false;
}
-/*
- * bigsmp enables physical destination mode
- * and doesn't use LDR and DFR
- */
-static void bigsmp_init_apic_ldr(void)
-{
-}
-
static void bigsmp_setup_apic_routing(void)
{
printk(KERN_INFO
@@ -108,7 +100,6 @@ static struct apic apic_bigsmp __ro_afte
.disable_esr = 1,
.check_apicid_used = bigsmp_check_apicid_used,
- .init_apic_ldr = bigsmp_init_apic_ldr,
.ioapic_phys_id_map = bigsmp_ioapic_phys_id_map,
.setup_apic_routing = bigsmp_setup_apic_routing,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
--- a/arch/x86/kernel/apic/local.h
+++ b/arch/x86/kernel/apic/local.h
@@ -13,9 +13,6 @@
#include <asm/irq_vectors.h>
#include <asm/apic.h>
-/* APIC flat 64 */
-void flat_init_apic_ldr(void);
-
/* X2APIC */
int x2apic_apic_id_valid(u32 apicid);
int x2apic_apic_id_registered(void);
@@ -46,6 +43,8 @@ static inline unsigned int __prepare_ICR
return icr;
}
+void default_init_apic_ldr(void);
+
void __default_send_IPI_shortcut(unsigned int shortcut, int vector);
/*
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -32,21 +32,6 @@ static int default_apic_id_registered(vo
return physid_isset(read_apic_id(), phys_cpu_present_map);
}
-/*
- * Set up the logical destination ID. Intel recommends to set DFR, LDR and
- * TPR before enabling an APIC. See e.g. "AP-388 82489DX User's Manual"
- * (Intel document number 292116).
- */
-static void default_init_apic_ldr(void)
-{
- unsigned long val;
-
- apic_write(APIC_DFR, APIC_DFR_VALUE);
- val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
- val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
- apic_write(APIC_LDR, val);
-}
-
static int default_phys_pkg_id(int cpuid_apic, int index_msb)
{
return cpuid_apic >> index_msb;
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -91,10 +91,6 @@ static void x2apic_send_IPI_all(int vect
__x2apic_send_IPI_shorthand(vector, APIC_DEST_ALLINC);
}
-static void init_x2apic_ldr(void)
-{
-}
-
static int x2apic_phys_probe(void)
{
if (!x2apic_mode)
@@ -169,7 +165,6 @@ static struct apic apic_x2apic_phys __ro
.disable_esr = 0,
.check_apicid_used = NULL,
- .init_apic_ldr = init_x2apic_ldr,
.ioapic_phys_id_map = NULL,
.setup_apic_routing = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -788,10 +788,6 @@ static int uv_apic_id_registered(void)
return 1;
}
-static void uv_init_apic_ldr(void)
-{
-}
-
static u32 apic_uv_calc_apicid(unsigned int cpu)
{
return apic_default_calc_apicid(cpu);
@@ -841,7 +837,6 @@ static struct apic apic_x2apic_uv_x __ro
.disable_esr = 0,
.check_apicid_used = NULL,
- .init_apic_ldr = uv_init_apic_ldr,
.ioapic_phys_id_map = NULL,
.setup_apic_routing = NULL,
.cpu_present_to_apicid = default_cpu_present_to_apicid,
--- a/arch/x86/xen/apic.c
+++ b/arch/x86/xen/apic.c
@@ -149,7 +149,6 @@ static struct apic xen_pv_apic = {
.disable_esr = 0,
.check_apicid_used = default_check_apicid_used, /* Used on 32-bit */
- .init_apic_ldr = xen_noop, /* setup_local_APIC calls it */
.ioapic_phys_id_map = default_ioapic_phys_id_map, /* Used on 32-bit */
.setup_apic_routing = NULL,
.cpu_present_to_apicid = xen_cpu_present_to_apicid,
next prev parent reply other threads:[~2023-07-17 23:16 UTC|newest]
Thread overview: 90+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-17 23:14 [patch 00/58] x86/apic: Decrapification and static calls Thomas Gleixner
2023-07-17 23:14 ` [patch 01/58] x86/cpu: Make identify_boot_cpu() static Thomas Gleixner
2023-07-17 23:14 ` [patch 02/58] x86/cpu: Remove unused physid_*() nonsense Thomas Gleixner
2023-07-17 23:14 ` [patch 03/58] x86/apic: Rename disable_apic Thomas Gleixner
2023-07-17 23:14 ` [patch 04/58] x86/apic/ioapic: Rename skip_ioapic_setup Thomas Gleixner
2023-07-17 23:14 ` [patch 05/58] x86/apic: Remove pointless x86_bios_cpu_apicid Thomas Gleixner
2023-07-17 23:14 ` [patch 06/58] x86/apic: Get rid of hard_smp_processor_id() Thomas Gleixner
2023-07-17 23:14 ` [patch 07/58] x86/apic: Remove unused max_physical_apicid Thomas Gleixner
2023-07-17 23:14 ` [patch 08/58] x86/apic: Nuke unused apic::inquire_remote_apic() Thomas Gleixner
2023-07-17 23:14 ` [patch 09/58] x86/apic: Get rid of boot_cpu_physical_apicid madness Thomas Gleixner
2023-07-17 23:14 ` [patch 10/58] x86/apic: Register boot CPU APIC early Thomas Gleixner
2023-07-17 23:14 ` [patch 11/58] x86/apic: Remove the pointless APIC version check Thomas Gleixner
2023-07-17 23:14 ` [patch 12/58] x86/of: Fix the APIC address registration Thomas Gleixner
2023-07-17 23:14 ` [patch 13/58] x86/apic: Make some APIC init functions bool Thomas Gleixner
2023-07-17 23:14 ` [patch 14/58] x86/apic: Split register_apic_address() Thomas Gleixner
2023-07-17 23:14 ` [patch 15/58] x86/apic: Sanitize APIC address setup Thomas Gleixner
2023-07-17 23:14 ` [patch 16/58] x86/apic: Sanitize num_processors handling Thomas Gleixner
2023-07-17 23:15 ` [patch 17/58] x86/apic: Nuke another processor check Thomas Gleixner
2023-07-17 23:15 ` [patch 18/58] x86/apic: Remove check_phys_apicid_present() Thomas Gleixner
2023-07-17 23:15 ` [patch 19/58] x86/apic: Get rid of apic_phys Thomas Gleixner
2023-07-18 13:11 ` Thomas Gleixner
2023-07-20 4:18 ` Michael Kelley (LINUX)
2023-07-20 8:03 ` Thomas Gleixner
2023-07-21 4:17 ` Michael Kelley (LINUX)
2023-07-17 23:15 ` [patch 20/58] x86/apic/32: Sanitize logical APIC ID handling Thomas Gleixner
2023-07-17 23:15 ` [patch 21/58] x86/apic/32: Remove x86_cpu_to_logical_apicid Thomas Gleixner
2023-07-17 23:15 ` [patch 22/58] x86/apic/ipi: Code cleanup Thomas Gleixner
2023-07-17 23:15 ` [patch 23/58] x86/apic: Mop up early_per_cpu() abuse Thomas Gleixner
2023-07-17 23:15 ` [patch 24/58] x86/apic/32: Remove pointless default_acpi_madt_oem_check() Thomas Gleixner
2023-07-18 4:28 ` Juergen Gross
2023-07-17 23:15 ` [patch 25/58] x86/apic/32: Decrapify the def_bigsmp mechanism Thomas Gleixner
2023-07-17 23:15 ` [patch 26/58] x86/apic/32: Remove bigsmp_cpu_present_to_apicid() Thomas Gleixner
2023-07-17 23:15 ` Thomas Gleixner [this message]
2023-07-17 23:15 ` [patch 28/58] x86/apic: Nuke apic::apicid_to_cpu_present() Thomas Gleixner
2023-07-17 23:15 ` [patch 29/58] x86/ioapic/32: Decrapify phys_id_present_map operation Thomas Gleixner
2023-07-17 23:15 ` [patch 30/58] x86/apic: Mop up *setup_apic_routing() Thomas Gleixner
2023-07-17 23:15 ` [patch 31/58] x86/apic: Mop up apic::apic_id_registered() Thomas Gleixner
2023-07-17 23:15 ` [patch 32/58] x86/apic/ipi: Tidy up the code and fixup comments Thomas Gleixner
2023-07-17 23:15 ` [patch 33/58] x86/apic: Consolidate wait_icr_idle() implementations Thomas Gleixner
2023-07-17 23:15 ` [patch 34/58] x86/apic: Allow apic::wait_icr_idle() to be NULL Thomas Gleixner
2023-07-17 23:15 ` [patch 35/58] x86/apic: Allow apic::safe_wait_icr_idle() " Thomas Gleixner
2023-07-17 23:15 ` [patch 36/58] x86/apic: Move safe wait_icr_idle() next to apic_mem_wait_icr_idle() Thomas Gleixner
2023-07-17 23:15 ` [patch 37/58] x86/apic/uv: Get rid of wrapper callbacks Thomas Gleixner
2023-07-17 23:15 ` [patch 38/58] x86/apic/x2apic: Share all common IPI functions Thomas Gleixner
2023-07-17 23:15 ` [patch 39/58] x86/apic/64: Uncopypaste probing Thomas Gleixner
2023-07-17 23:15 ` [patch 40/58] x86/apic: Wrap APIC ID validation into an inline Thomas Gleixner
2023-07-17 23:15 ` [patch 41/58] x86/apic: Add max_apic_id member Thomas Gleixner
2023-07-18 0:19 ` Linus Torvalds
2023-07-18 7:47 ` Thomas Gleixner
2023-07-18 15:54 ` Thomas Gleixner
2023-07-18 16:06 ` Linus Torvalds
2023-07-18 18:59 ` Thomas Gleixner
2023-07-17 23:15 ` [patch 42/58] x86/apic: Simplify X2APIC ID validation Thomas Gleixner
2023-07-17 23:15 ` [patch 43/58] x86/apic: Prepare x2APIC for using apic::max_apic_id Thomas Gleixner
2023-07-17 23:15 ` [patch 44/58] x86/apic: Sanitize APID ID range validation Thomas Gleixner
2023-07-17 23:15 ` [patch 45/58] x86/apic: Remove pointless NULL initializations Thomas Gleixner
2023-07-17 23:15 ` [patch 46/58] x86/apic/noop: Tidy up the code Thomas Gleixner
2023-07-17 23:15 ` [patch 47/58] x86/apic: Remove pointless arguments from [native_]eoi_write() Thomas Gleixner
2023-07-23 22:45 ` Wei Liu
2023-07-17 23:15 ` [patch 48/58] x86/apic: Nuke ack_APIC_irq() Thomas Gleixner
2023-07-23 22:45 ` Wei Liu
2023-07-17 23:15 ` [patch 49/58] x86/apic: Wrap apic->native_eoi() into a helper Thomas Gleixner
2023-07-17 23:15 ` [patch 50/58] x86/apic: Provide common init infrastructure Thomas Gleixner
2023-07-18 21:29 ` Peter Keresztes Schmidt
2023-07-18 21:51 ` Thomas Gleixner
2023-07-17 23:15 ` [patch 51/58] x86/apic: Provide apic_update_callback() Thomas Gleixner
2023-07-21 4:27 ` Michael Kelley (LINUX)
2023-07-17 23:15 ` [patch 52/58] x86/apic: Replace acpi_wake_cpu_handler_update() and apic_set_eoi_cb() Thomas Gleixner
2023-07-23 22:55 ` Wei Liu
2023-07-17 23:15 ` [patch 53/58] x86/apic: Convert other overrides to apic_update_callback() Thomas Gleixner
2023-07-21 17:49 ` Michael Kelley (LINUX)
2023-07-23 12:32 ` Thomas Gleixner
2023-07-17 23:15 ` [patch 54/58] x86/xen/apic: Mark apic __ro_after_init Thomas Gleixner
2023-07-18 15:31 ` Juergen Gross
2023-07-18 15:56 ` Thomas Gleixner
2023-07-18 16:08 ` Juergen Gross
2023-07-17 23:16 ` [patch 55/58] x86/apic: Mark all hotpath APIC callback wrappers __always_inline Thomas Gleixner
2023-07-17 23:16 ` [patch 56/58] x86/apic: Wrap IPI calls into helper functions Thomas Gleixner
2023-07-17 23:16 ` [patch 57/58] x86/apic: Provide static call infrastructure for APIC callbacks Thomas Gleixner
2023-07-18 9:19 ` Peter Zijlstra
2023-07-17 23:16 ` [patch 58/58] x86/apic: Turn on static calls Thomas Gleixner
2023-07-18 13:35 ` Thomas Gleixner
2023-07-18 0:27 ` [patch 00/58] x86/apic: Decrapification and " Linus Torvalds
2023-07-18 9:23 ` Peter Zijlstra
2023-07-18 14:29 ` Linus Walleij
2023-07-24 16:59 ` William Breathitt Gray
2023-07-20 12:43 ` Marc Gonzalez
2023-07-20 13:13 ` Peter Zijlstra
2023-07-20 13:47 ` Thomas Gleixner
2023-07-20 15:16 ` Marc Gonzalez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230717223224.682027281@linutronix.de \
--to=tglx@linutronix.de \
--cc=andrew.cooper3@citrix.com \
--cc=arjan@linux.intel.com \
--cc=jgross@suse.com \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=thomas.lendacky@amd.com \
--cc=torvalds@linux-foundation.org \
--cc=wei.liu@kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome