* [-next v1 0/1] Fix StarFive JH7110 gmac TCP RX speed issue
@ 2023-08-10 7:46 Samin Guo
2023-08-10 7:46 ` [-next v1 1/1] riscv: dts: starfive: jh7110: Fix GMAC configuration Samin Guo
2023-08-10 15:37 ` [-next v1 0/1] Fix StarFive JH7110 gmac TCP RX speed issue Conor Dooley
0 siblings, 2 replies; 8+ messages in thread
From: Samin Guo @ 2023-08-10 7:46 UTC (permalink / raw)
To: linux-kernel, linux-riscv, devicetree
Cc: Emil Renner Berthing, Emil Renner Berthing, Conor Dooley,
Rob Herring, Krzysztof Kozlowski, Paul Walmsley, Palmer Dabbelt,
Albert Ou, Samin Guo, Hal Feng
This patch fixes the StarFive JH7110 gmac TCP RX slow issue. And it has been
tested on VisionFive 2.
Here is the result of the test (iperf3):
Before:
# iperf3 -s
-----------------------------------------------------------
Server listening on 5201 (test #1)
-----------------------------------------------------------
Accepted connection from 192.168.1.4, port 47604
[ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 36.3 MBytes 305 Mbits/sec
[ 5] 1.00-2.00 sec 35.6 MBytes 299 Mbits/sec
[ 5] 2.00-3.00 sec 36.5 MBytes 306 Mbits/sec
[ 5] 3.00-4.00 sec 36.5 MBytes 306 Mbits/sec
[ 5] 4.00-5.00 sec 35.7 MBytes 300 Mbits/sec
[ 5] 5.00-6.00 sec 35.4 MBytes 297 Mbits/sec
[ 5] 6.00-7.00 sec 37.1 MBytes 311 Mbits/sec
[ 5] 7.00-8.00 sec 35.6 MBytes 298 Mbits/sec
[ 5] 8.00-9.00 sec 36.4 MBytes 305 Mbits/sec
[ 5] 9.00-10.00 sec 36.3 MBytes 304 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.00 sec 361 MBytes 303 Mbits/sec receiver
After:
# iperf3 -s
-----------------------------------------------------------
Server listening on 5201 (test #1)
-----------------------------------------------------------
Accepted connection from 192.168.1.4, port 47710
[ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47720
[ ID] Interval Transfer Bitrate
[ 5] 0.00-1.00 sec 111 MBytes 932 Mbits/sec
[ 5] 1.00-2.00 sec 111 MBytes 934 Mbits/sec
[ 5] 2.00-3.00 sec 111 MBytes 934 Mbits/sec
[ 5] 3.00-4.00 sec 111 MBytes 934 Mbits/sec
[ 5] 4.00-5.00 sec 111 MBytes 934 Mbits/sec
[ 5] 5.00-6.00 sec 111 MBytes 935 Mbits/sec
[ 5] 6.00-7.00 sec 111 MBytes 934 Mbits/sec
[ 5] 7.00-8.00 sec 111 MBytes 935 Mbits/sec
[ 5] 8.00-9.00 sec 111 MBytes 934 Mbits/sec
[ 5] 9.00-10.00 sec 111 MBytes 934 Mbits/sec
[ 5] 10.00-10.00 sec 167 KBytes 933 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.00 sec 1.09 GBytes 934 Mbits/sec receiver
For more information and support, you can visit RVspace wiki[1].
[1]: https://wiki.rvspace.org/
Samin Guo (1):
riscv: starfive: jh7110: Fix GMAC configuration
arch/riscv/boot/dts/starfive/jh7110.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--
2.17.1
^ permalink raw reply [flat|nested] 8+ messages in thread* [-next v1 1/1] riscv: dts: starfive: jh7110: Fix GMAC configuration 2023-08-10 7:46 [-next v1 0/1] Fix StarFive JH7110 gmac TCP RX speed issue Samin Guo @ 2023-08-10 7:46 ` Samin Guo 2023-08-10 10:48 ` Conor Dooley 2023-08-10 11:28 ` Emil Renner Berthing 2023-08-10 15:37 ` [-next v1 0/1] Fix StarFive JH7110 gmac TCP RX speed issue Conor Dooley 1 sibling, 2 replies; 8+ messages in thread From: Samin Guo @ 2023-08-10 7:46 UTC (permalink / raw) To: linux-kernel, linux-riscv, devicetree Cc: Emil Renner Berthing, Emil Renner Berthing, Conor Dooley, Rob Herring, Krzysztof Kozlowski, Paul Walmsley, Palmer Dabbelt, Albert Ou, Samin Guo, Hal Feng Fixed configuration to improve the speed of TCP RX. Before: # iperf3 -s ----------------------------------------------------------- Server listening on 5201 (test #1) ----------------------------------------------------------- Accepted connection from 192.168.1.4, port 47604 [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 36.3 MBytes 305 Mbits/sec [ 5] 1.00-2.00 sec 35.6 MBytes 299 Mbits/sec [ 5] 2.00-3.00 sec 36.5 MBytes 306 Mbits/sec [ 5] 3.00-4.00 sec 36.5 MBytes 306 Mbits/sec [ 5] 4.00-5.00 sec 35.7 MBytes 300 Mbits/sec [ 5] 5.00-6.00 sec 35.4 MBytes 297 Mbits/sec [ 5] 6.00-7.00 sec 37.1 MBytes 311 Mbits/sec [ 5] 7.00-8.00 sec 35.6 MBytes 298 Mbits/sec [ 5] 8.00-9.00 sec 36.4 MBytes 305 Mbits/sec [ 5] 9.00-10.00 sec 36.3 MBytes 304 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.00 sec 361 MBytes 303 Mbits/sec receiver After: # iperf3 -s ----------------------------------------------------------- Server listening on 5201 (test #1) ----------------------------------------------------------- Accepted connection from 192.168.1.4, port 47710 [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47720 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 111 MBytes 932 Mbits/sec [ 5] 1.00-2.00 sec 111 MBytes 934 Mbits/sec [ 5] 2.00-3.00 sec 111 MBytes 934 Mbits/sec [ 5] 3.00-4.00 sec 111 MBytes 934 Mbits/sec [ 5] 4.00-5.00 sec 111 MBytes 934 Mbits/sec [ 5] 5.00-6.00 sec 111 MBytes 935 Mbits/sec [ 5] 6.00-7.00 sec 111 MBytes 934 Mbits/sec [ 5] 7.00-8.00 sec 111 MBytes 935 Mbits/sec [ 5] 8.00-9.00 sec 111 MBytes 934 Mbits/sec [ 5] 9.00-10.00 sec 111 MBytes 934 Mbits/sec [ 5] 10.00-10.00 sec 167 KBytes 933 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.00 sec 1.09 GBytes 934 Mbits/sec receiver Reviewed-by: Hal Feng <hal.feng@starfivetech.com> Signed-off-by: Samin Guo <samin.guo@starfivetech.com> --- arch/riscv/boot/dts/starfive/jh7110.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi index a608433200e8..76884cf373bf 100644 --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi @@ -318,8 +318,8 @@ stmmac_axi_setup: stmmac-axi-config { snps,lpi_en; - snps,wr_osr_lmt = <4>; - snps,rd_osr_lmt = <4>; + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>; snps,blen = <256 128 64 32 0 0 0>; }; @@ -839,7 +839,7 @@ rx-fifo-depth = <2048>; tx-fifo-depth = <2048>; snps,multicast-filter-bins = <64>; - snps,perfect-filter-entries = <8>; + snps,perfect-filter-entries = <256>; snps,fixed-burst; snps,no-pbl-x8; snps,force_thresh_dma_mode; @@ -870,7 +870,7 @@ rx-fifo-depth = <2048>; tx-fifo-depth = <2048>; snps,multicast-filter-bins = <64>; - snps,perfect-filter-entries = <8>; + snps,perfect-filter-entries = <256>; snps,fixed-burst; snps,no-pbl-x8; snps,force_thresh_dma_mode; -- 2.17.1 ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [-next v1 1/1] riscv: dts: starfive: jh7110: Fix GMAC configuration 2023-08-10 7:46 ` [-next v1 1/1] riscv: dts: starfive: jh7110: Fix GMAC configuration Samin Guo @ 2023-08-10 10:48 ` Conor Dooley 2023-08-10 10:54 ` Guo Samin 2023-08-10 11:28 ` Emil Renner Berthing 1 sibling, 1 reply; 8+ messages in thread From: Conor Dooley @ 2023-08-10 10:48 UTC (permalink / raw) To: Samin Guo Cc: linux-kernel, linux-riscv, devicetree, Emil Renner Berthing, Emil Renner Berthing, Conor Dooley, Rob Herring, Krzysztof Kozlowski, Paul Walmsley, Palmer Dabbelt, Albert Ou, Hal Feng [-- Attachment #1: Type: text/plain, Size: 2670 bytes --] On Thu, Aug 10, 2023 at 03:46:46PM +0800, Samin Guo wrote: > Fixed configuration to improve the speed of TCP RX. > > Before: > # iperf3 -s > ----------------------------------------------------------- > Server listening on 5201 (test #1) > ----------------------------------------------------------- > Accepted connection from 192.168.1.4, port 47604 > [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612 > [ ID] Interval Transfer Bitrate > [ 5] 0.00-1.00 sec 36.3 MBytes 305 Mbits/sec > [ 5] 1.00-2.00 sec 35.6 MBytes 299 Mbits/sec > [ 5] 2.00-3.00 sec 36.5 MBytes 306 Mbits/sec > [ 5] 3.00-4.00 sec 36.5 MBytes 306 Mbits/sec > [ 5] 4.00-5.00 sec 35.7 MBytes 300 Mbits/sec > [ 5] 5.00-6.00 sec 35.4 MBytes 297 Mbits/sec > [ 5] 6.00-7.00 sec 37.1 MBytes 311 Mbits/sec > [ 5] 7.00-8.00 sec 35.6 MBytes 298 Mbits/sec > [ 5] 8.00-9.00 sec 36.4 MBytes 305 Mbits/sec > [ 5] 9.00-10.00 sec 36.3 MBytes 304 Mbits/sec > - - - - - - - - - - - - - - - - - - - - - - - - - > [ ID] Interval Transfer Bitrate > [ 5] 0.00-10.00 sec 361 MBytes 303 Mbits/sec receiver > > After: > # iperf3 -s > ----------------------------------------------------------- > Server listening on 5201 (test #1) > ----------------------------------------------------------- > Accepted connection from 192.168.1.4, port 47710 > [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47720 > [ ID] Interval Transfer Bitrate > [ 5] 0.00-1.00 sec 111 MBytes 932 Mbits/sec > [ 5] 1.00-2.00 sec 111 MBytes 934 Mbits/sec > [ 5] 2.00-3.00 sec 111 MBytes 934 Mbits/sec > [ 5] 3.00-4.00 sec 111 MBytes 934 Mbits/sec > [ 5] 4.00-5.00 sec 111 MBytes 934 Mbits/sec > [ 5] 5.00-6.00 sec 111 MBytes 935 Mbits/sec > [ 5] 6.00-7.00 sec 111 MBytes 934 Mbits/sec > [ 5] 7.00-8.00 sec 111 MBytes 935 Mbits/sec > [ 5] 8.00-9.00 sec 111 MBytes 934 Mbits/sec > [ 5] 9.00-10.00 sec 111 MBytes 934 Mbits/sec > [ 5] 10.00-10.00 sec 167 KBytes 933 Mbits/sec > - - - - - - - - - - - - - - - - - - - - - - - - - > [ ID] Interval Transfer Bitrate > [ 5] 0.00-10.00 sec 1.09 GBytes 934 Mbits/sec receiver > > Reviewed-by: Hal Feng <hal.feng@starfivetech.com> > Signed-off-by: Samin Guo <samin.guo@starfivetech.com> This is Fixes: 1ff166c97972 ("riscv: dts: starfive: jh7110: Add ethernet device nodes") right? [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 228 bytes --] ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [-next v1 1/1] riscv: dts: starfive: jh7110: Fix GMAC configuration 2023-08-10 10:48 ` Conor Dooley @ 2023-08-10 10:54 ` Guo Samin 0 siblings, 0 replies; 8+ messages in thread From: Guo Samin @ 2023-08-10 10:54 UTC (permalink / raw) To: Conor Dooley Cc: linux-kernel, linux-riscv, devicetree, Emil Renner Berthing, Emil Renner Berthing, Conor Dooley, Rob Herring, Krzysztof Kozlowski, Paul Walmsley, Palmer Dabbelt, Albert Ou, Hal Feng on 2023/8/10 18:48:38, Conor Dooley wrote: > On Thu, Aug 10, 2023 at 03:46:46PM +0800, Samin Guo wrote: >> Fixed configuration to improve the speed of TCP RX. >> >> Before: >> # iperf3 -s >> ----------------------------------------------------------- >> Server listening on 5201 (test #1) >> ----------------------------------------------------------- >> Accepted connection from 192.168.1.4, port 47604 >> [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612 >> [ ID] Interval Transfer Bitrate >> [ 5] 0.00-1.00 sec 36.3 MBytes 305 Mbits/sec >> [ 5] 1.00-2.00 sec 35.6 MBytes 299 Mbits/sec >> [ 5] 2.00-3.00 sec 36.5 MBytes 306 Mbits/sec >> [ 5] 3.00-4.00 sec 36.5 MBytes 306 Mbits/sec >> [ 5] 4.00-5.00 sec 35.7 MBytes 300 Mbits/sec >> [ 5] 5.00-6.00 sec 35.4 MBytes 297 Mbits/sec >> [ 5] 6.00-7.00 sec 37.1 MBytes 311 Mbits/sec >> [ 5] 7.00-8.00 sec 35.6 MBytes 298 Mbits/sec >> [ 5] 8.00-9.00 sec 36.4 MBytes 305 Mbits/sec >> [ 5] 9.00-10.00 sec 36.3 MBytes 304 Mbits/sec >> - - - - - - - - - - - - - - - - - - - - - - - - - >> [ ID] Interval Transfer Bitrate >> [ 5] 0.00-10.00 sec 361 MBytes 303 Mbits/sec receiver >> >> After: >> # iperf3 -s >> ----------------------------------------------------------- >> Server listening on 5201 (test #1) >> ----------------------------------------------------------- >> Accepted connection from 192.168.1.4, port 47710 >> [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47720 >> [ ID] Interval Transfer Bitrate >> [ 5] 0.00-1.00 sec 111 MBytes 932 Mbits/sec >> [ 5] 1.00-2.00 sec 111 MBytes 934 Mbits/sec >> [ 5] 2.00-3.00 sec 111 MBytes 934 Mbits/sec >> [ 5] 3.00-4.00 sec 111 MBytes 934 Mbits/sec >> [ 5] 4.00-5.00 sec 111 MBytes 934 Mbits/sec >> [ 5] 5.00-6.00 sec 111 MBytes 935 Mbits/sec >> [ 5] 6.00-7.00 sec 111 MBytes 934 Mbits/sec >> [ 5] 7.00-8.00 sec 111 MBytes 935 Mbits/sec >> [ 5] 8.00-9.00 sec 111 MBytes 934 Mbits/sec >> [ 5] 9.00-10.00 sec 111 MBytes 934 Mbits/sec >> [ 5] 10.00-10.00 sec 167 KBytes 933 Mbits/sec >> - - - - - - - - - - - - - - - - - - - - - - - - - >> [ ID] Interval Transfer Bitrate >> [ 5] 0.00-10.00 sec 1.09 GBytes 934 Mbits/sec receiver >> >> Reviewed-by: Hal Feng <hal.feng@starfivetech.com> >> Signed-off-by: Samin Guo <samin.guo@starfivetech.com> > > This is > Fixes: 1ff166c97972 ("riscv: dts: starfive: jh7110: Add ethernet device nodes") > right? Hi Conor， Yes. There is an issue with the configuration of the 1ff166c97972 that affects the speed of the GMAC TCP RX. Best regards, Samin ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [-next v1 1/1] riscv: dts: starfive: jh7110: Fix GMAC configuration 2023-08-10 7:46 ` [-next v1 1/1] riscv: dts: starfive: jh7110: Fix GMAC configuration Samin Guo 2023-08-10 10:48 ` Conor Dooley @ 2023-08-10 11:28 ` Emil Renner Berthing 2023-08-11 1:38 ` Guo Samin 1 sibling, 1 reply; 8+ messages in thread From: Emil Renner Berthing @ 2023-08-10 11:28 UTC (permalink / raw) To: Samin Guo Cc: linux-kernel, linux-riscv, devicetree, Emil Renner Berthing, Conor Dooley, Rob Herring, Krzysztof Kozlowski, Paul Walmsley, Palmer Dabbelt, Albert Ou, Hal Feng On Thu, 10 Aug 2023 at 09:46, Samin Guo <samin.guo@starfivetech.com> wrote: > > Fixed configuration to improve the speed of TCP RX. > > Before: > # iperf3 -s > ----------------------------------------------------------- > Server listening on 5201 (test #1) > ----------------------------------------------------------- > Accepted connection from 192.168.1.4, port 47604 > [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612 > [ ID] Interval Transfer Bitrate > [ 5] 0.00-1.00 sec 36.3 MBytes 305 Mbits/sec > [ 5] 1.00-2.00 sec 35.6 MBytes 299 Mbits/sec > [ 5] 2.00-3.00 sec 36.5 MBytes 306 Mbits/sec > [ 5] 3.00-4.00 sec 36.5 MBytes 306 Mbits/sec > [ 5] 4.00-5.00 sec 35.7 MBytes 300 Mbits/sec > [ 5] 5.00-6.00 sec 35.4 MBytes 297 Mbits/sec > [ 5] 6.00-7.00 sec 37.1 MBytes 311 Mbits/sec > [ 5] 7.00-8.00 sec 35.6 MBytes 298 Mbits/sec > [ 5] 8.00-9.00 sec 36.4 MBytes 305 Mbits/sec > [ 5] 9.00-10.00 sec 36.3 MBytes 304 Mbits/sec > - - - - - - - - - - - - - - - - - - - - - - - - - > [ ID] Interval Transfer Bitrate > [ 5] 0.00-10.00 sec 361 MBytes 303 Mbits/sec receiver > > After: > # iperf3 -s > ----------------------------------------------------------- > Server listening on 5201 (test #1) > ----------------------------------------------------------- > Accepted connection from 192.168.1.4, port 47710 > [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47720 > [ ID] Interval Transfer Bitrate > [ 5] 0.00-1.00 sec 111 MBytes 932 Mbits/sec > [ 5] 1.00-2.00 sec 111 MBytes 934 Mbits/sec > [ 5] 2.00-3.00 sec 111 MBytes 934 Mbits/sec > [ 5] 3.00-4.00 sec 111 MBytes 934 Mbits/sec > [ 5] 4.00-5.00 sec 111 MBytes 934 Mbits/sec > [ 5] 5.00-6.00 sec 111 MBytes 935 Mbits/sec > [ 5] 6.00-7.00 sec 111 MBytes 934 Mbits/sec > [ 5] 7.00-8.00 sec 111 MBytes 935 Mbits/sec > [ 5] 8.00-9.00 sec 111 MBytes 934 Mbits/sec > [ 5] 9.00-10.00 sec 111 MBytes 934 Mbits/sec > [ 5] 10.00-10.00 sec 167 KBytes 933 Mbits/sec > - - - - - - - - - - - - - - - - - - - - - - - - - > [ ID] Interval Transfer Bitrate > [ 5] 0.00-10.00 sec 1.09 GBytes 934 Mbits/sec receiver > > Reviewed-by: Hal Feng <hal.feng@starfivetech.com> > Signed-off-by: Samin Guo <samin.guo@starfivetech.com> > --- > arch/riscv/boot/dts/starfive/jh7110.dtsi | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi > index a608433200e8..76884cf373bf 100644 > --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi > +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi > @@ -318,8 +318,8 @@ > > stmmac_axi_setup: stmmac-axi-config { > snps,lpi_en; > - snps,wr_osr_lmt = <4>; > - snps,rd_osr_lmt = <4>; > + snps,wr_osr_lmt = <0xf>; > + snps,rd_osr_lmt = <0xf>; nit: this is a limit, so presumably counting things and not an address or bitmask, so I'd prefer decimal numbers here, eg <15>. It works fine either way, so Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> > snps,blen = <256 128 64 32 0 0 0>; > }; > > @@ -839,7 +839,7 @@ > rx-fifo-depth = <2048>; > tx-fifo-depth = <2048>; > snps,multicast-filter-bins = <64>; > - snps,perfect-filter-entries = <8>; > + snps,perfect-filter-entries = <256>; > snps,fixed-burst; > snps,no-pbl-x8; > snps,force_thresh_dma_mode; > @@ -870,7 +870,7 @@ > rx-fifo-depth = <2048>; > tx-fifo-depth = <2048>; > snps,multicast-filter-bins = <64>; > - snps,perfect-filter-entries = <8>; > + snps,perfect-filter-entries = <256>; > snps,fixed-burst; > snps,no-pbl-x8; > snps,force_thresh_dma_mode; > -- > 2.17.1 > ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [-next v1 1/1] riscv: dts: starfive: jh7110: Fix GMAC configuration 2023-08-10 11:28 ` Emil Renner Berthing @ 2023-08-11 1:38 ` Guo Samin 0 siblings, 0 replies; 8+ messages in thread From: Guo Samin @ 2023-08-11 1:38 UTC (permalink / raw) To: Emil Renner Berthing Cc: linux-kernel, linux-riscv, devicetree, Emil Renner Berthing, Conor Dooley, Rob Herring, Krzysztof Kozlowski, Paul Walmsley, Palmer Dabbelt, Albert Ou, Hal Feng On 2023/8/10 19:28:23, Emil Renner Berthing wrote: > On Thu, 10 Aug 2023 at 09:46, Samin Guo <samin.guo@starfivetech.com> wrote: >> >> Fixed configuration to improve the speed of TCP RX. >> >> Before: >> # iperf3 -s >> ----------------------------------------------------------- >> Server listening on 5201 (test #1) >> ----------------------------------------------------------- >> Accepted connection from 192.168.1.4, port 47604 >> [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612 >> [ ID] Interval Transfer Bitrate >> [ 5] 0.00-1.00 sec 36.3 MBytes 305 Mbits/sec >> [ 5] 1.00-2.00 sec 35.6 MBytes 299 Mbits/sec >> [ 5] 2.00-3.00 sec 36.5 MBytes 306 Mbits/sec >> [ 5] 3.00-4.00 sec 36.5 MBytes 306 Mbits/sec >> [ 5] 4.00-5.00 sec 35.7 MBytes 300 Mbits/sec >> [ 5] 5.00-6.00 sec 35.4 MBytes 297 Mbits/sec >> [ 5] 6.00-7.00 sec 37.1 MBytes 311 Mbits/sec >> [ 5] 7.00-8.00 sec 35.6 MBytes 298 Mbits/sec >> [ 5] 8.00-9.00 sec 36.4 MBytes 305 Mbits/sec >> [ 5] 9.00-10.00 sec 36.3 MBytes 304 Mbits/sec >> - - - - - - - - - - - - - - - - - - - - - - - - - >> [ ID] Interval Transfer Bitrate >> [ 5] 0.00-10.00 sec 361 MBytes 303 Mbits/sec receiver >> >> After: >> # iperf3 -s >> ----------------------------------------------------------- >> Server listening on 5201 (test #1) >> ----------------------------------------------------------- >> Accepted connection from 192.168.1.4, port 47710 >> [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47720 >> [ ID] Interval Transfer Bitrate >> [ 5] 0.00-1.00 sec 111 MBytes 932 Mbits/sec >> [ 5] 1.00-2.00 sec 111 MBytes 934 Mbits/sec >> [ 5] 2.00-3.00 sec 111 MBytes 934 Mbits/sec >> [ 5] 3.00-4.00 sec 111 MBytes 934 Mbits/sec >> [ 5] 4.00-5.00 sec 111 MBytes 934 Mbits/sec >> [ 5] 5.00-6.00 sec 111 MBytes 935 Mbits/sec >> [ 5] 6.00-7.00 sec 111 MBytes 934 Mbits/sec >> [ 5] 7.00-8.00 sec 111 MBytes 935 Mbits/sec >> [ 5] 8.00-9.00 sec 111 MBytes 934 Mbits/sec >> [ 5] 9.00-10.00 sec 111 MBytes 934 Mbits/sec >> [ 5] 10.00-10.00 sec 167 KBytes 933 Mbits/sec >> - - - - - - - - - - - - - - - - - - - - - - - - - >> [ ID] Interval Transfer Bitrate >> [ 5] 0.00-10.00 sec 1.09 GBytes 934 Mbits/sec receiver >> >> Reviewed-by: Hal Feng <hal.feng@starfivetech.com> >> Signed-off-by: Samin Guo <samin.guo@starfivetech.com> >> --- >> arch/riscv/boot/dts/starfive/jh7110.dtsi | 8 ++++---- >> 1 file changed, 4 insertions(+), 4 deletions(-) >> >> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi >> index a608433200e8..76884cf373bf 100644 >> --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi >> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi >> @@ -318,8 +318,8 @@ >> >> stmmac_axi_setup: stmmac-axi-config { >> snps,lpi_en; >> - snps,wr_osr_lmt = <4>; >> - snps,rd_osr_lmt = <4>; >> + snps,wr_osr_lmt = <0xf>; >> + snps,rd_osr_lmt = <0xf>; > > nit: this is a limit, so presumably counting things and not an address > or bitmask, so I'd prefer decimal numbers here, eg <15>. > > It works fine either way, so > Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Thanks Esmil, that's right. I refer to examples of snps,dwmac.yaml, so I use 0xf... Best regards, Samin > >> snps,blen = <256 128 64 32 0 0 0>; >> }; >> >> @@ -839,7 +839,7 @@ >> rx-fifo-depth = <2048>; >> tx-fifo-depth = <2048>; >> snps,multicast-filter-bins = <64>; >> - snps,perfect-filter-entries = <8>; >> + snps,perfect-filter-entries = <256>; >> snps,fixed-burst; >> snps,no-pbl-x8; >> snps,force_thresh_dma_mode; >> @@ -870,7 +870,7 @@ >> rx-fifo-depth = <2048>; >> tx-fifo-depth = <2048>; >> snps,multicast-filter-bins = <64>; >> - snps,perfect-filter-entries = <8>; >> + snps,perfect-filter-entries = <256>; >> snps,fixed-burst; >> snps,no-pbl-x8; >> snps,force_thresh_dma_mode; >> -- >> 2.17.1 >> ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [-next v1 0/1] Fix StarFive JH7110 gmac TCP RX speed issue 2023-08-10 7:46 [-next v1 0/1] Fix StarFive JH7110 gmac TCP RX speed issue Samin Guo 2023-08-10 7:46 ` [-next v1 1/1] riscv: dts: starfive: jh7110: Fix GMAC configuration Samin Guo @ 2023-08-10 15:37 ` Conor Dooley 2023-08-11 1:42 ` Guo Samin 1 sibling, 1 reply; 8+ messages in thread From: Conor Dooley @ 2023-08-10 15:37 UTC (permalink / raw) To: linux-kernel, linux-riscv, devicetree, Samin Guo Cc: conor, Conor Dooley, Emil Renner Berthing, Emil Renner Berthing, Rob Herring, Krzysztof Kozlowski, Paul Walmsley, Palmer Dabbelt, Albert Ou, Hal Feng From: Conor Dooley <conor.dooley@microchip.com> On Thu, 10 Aug 2023 15:46:45 +0800, Samin Guo wrote: > This patch fixes the StarFive JH7110 gmac TCP RX slow issue. And it has been > tested on VisionFive 2. > > Here is the result of the test (iperf3): > > Before: > # iperf3 -s > ----------------------------------------------------------- > Server listening on 5201 (test #1) > ----------------------------------------------------------- > Accepted connection from 192.168.1.4, port 47604 > [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612 > [ ID] Interval Transfer Bitrate > [ 5] 0.00-1.00 sec 36.3 MBytes 305 Mbits/sec > [ 5] 1.00-2.00 sec 35.6 MBytes 299 Mbits/sec > [ 5] 2.00-3.00 sec 36.5 MBytes 306 Mbits/sec > [ 5] 3.00-4.00 sec 36.5 MBytes 306 Mbits/sec > [ 5] 4.00-5.00 sec 35.7 MBytes 300 Mbits/sec > [ 5] 5.00-6.00 sec 35.4 MBytes 297 Mbits/sec > [ 5] 6.00-7.00 sec 37.1 MBytes 311 Mbits/sec > [ 5] 7.00-8.00 sec 35.6 MBytes 298 Mbits/sec > [ 5] 8.00-9.00 sec 36.4 MBytes 305 Mbits/sec > [ 5] 9.00-10.00 sec 36.3 MBytes 304 Mbits/sec > - - - - - - - - - - - - - - - - - - - - - - - - - > [ ID] Interval Transfer Bitrate > [ 5] 0.00-10.00 sec 361 MBytes 303 Mbits/sec receiver > > [...] Applied to riscv-dt-for-next with the conversion to decimal, thanks! [1/1] riscv: dts: starfive: jh7110: Fix GMAC configuration https://git.kernel.org/conor/c/1273f7e96a70 Thanks, Conor. ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [-next v1 0/1] Fix StarFive JH7110 gmac TCP RX speed issue 2023-08-10 15:37 ` [-next v1 0/1] Fix StarFive JH7110 gmac TCP RX speed issue Conor Dooley @ 2023-08-11 1:42 ` Guo Samin 0 siblings, 0 replies; 8+ messages in thread From: Guo Samin @ 2023-08-11 1:42 UTC (permalink / raw) To: Conor Dooley, linux-kernel, linux-riscv, devicetree Cc: Conor Dooley, Emil Renner Berthing, Emil Renner Berthing, Rob Herring, Krzysztof Kozlowski, Paul Walmsley, Palmer Dabbelt, Albert Ou, Hal Feng On 2023/8/10 23:37:13, Conor Dooley wrote: > From: Conor Dooley <conor.dooley@microchip.com> > > On Thu, 10 Aug 2023 15:46:45 +0800, Samin Guo wrote: >> This patch fixes the StarFive JH7110 gmac TCP RX slow issue. And it has been >> tested on VisionFive 2. >> >> Here is the result of the test (iperf3): >> >> Before: >> # iperf3 -s >> ----------------------------------------------------------- >> Server listening on 5201 (test #1) >> ----------------------------------------------------------- >> Accepted connection from 192.168.1.4, port 47604 >> [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612 >> [ ID] Interval Transfer Bitrate >> [ 5] 0.00-1.00 sec 36.3 MBytes 305 Mbits/sec >> [ 5] 1.00-2.00 sec 35.6 MBytes 299 Mbits/sec >> [ 5] 2.00-3.00 sec 36.5 MBytes 306 Mbits/sec >> [ 5] 3.00-4.00 sec 36.5 MBytes 306 Mbits/sec >> [ 5] 4.00-5.00 sec 35.7 MBytes 300 Mbits/sec >> [ 5] 5.00-6.00 sec 35.4 MBytes 297 Mbits/sec >> [ 5] 6.00-7.00 sec 37.1 MBytes 311 Mbits/sec >> [ 5] 7.00-8.00 sec 35.6 MBytes 298 Mbits/sec >> [ 5] 8.00-9.00 sec 36.4 MBytes 305 Mbits/sec >> [ 5] 9.00-10.00 sec 36.3 MBytes 304 Mbits/sec >> - - - - - - - - - - - - - - - - - - - - - - - - - >> [ ID] Interval Transfer Bitrate >> [ 5] 0.00-10.00 sec 361 MBytes 303 Mbits/sec receiver >> >> [...] > > Applied to riscv-dt-for-next with the conversion to decimal, thanks! > > [1/1] riscv: dts: starfive: jh7110: Fix GMAC configuration > https://git.kernel.org/conor/c/1273f7e96a70 > > Thanks, > Conor. Hi Conor， Thank a lot for for merging into the next branch so promptly！ Best regards, Samin ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2023-08-11 1:42 UTC | newest] Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2023-08-10 7:46 [-next v1 0/1] Fix StarFive JH7110 gmac TCP RX speed issue Samin Guo 2023-08-10 7:46 ` [-next v1 1/1] riscv: dts: starfive: jh7110: Fix GMAC configuration Samin Guo 2023-08-10 10:48 ` Conor Dooley 2023-08-10 10:54 ` Guo Samin 2023-08-10 11:28 ` Emil Renner Berthing 2023-08-11 1:38 ` Guo Samin 2023-08-10 15:37 ` [-next v1 0/1] Fix StarFive JH7110 gmac TCP RX speed issue Conor Dooley 2023-08-11 1:42 ` Guo Samin
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®