From: Thomas Gleixner <tglx@linutronix.de>
To: LKML <linux-kernel@vger.kernel.org>
Cc: x86@kernel.org, Borislav Petkov <bp@alien8.de>,
Ashok Raj <ashok.raj@intel.com>,
Arjan van de Ven <arjan@linux.intel.com>
Subject: [patch 07/30] x86/microcode: Move core specific defines to local header
Date: Thu, 10 Aug 2023 20:37:36 +0200 (CEST) [thread overview]
Message-ID: <20230810160805.362918410@linutronix.de> (raw)
In-Reply-To: <20230810153317.850017756@linutronix.de>
From: Thomas Gleixner <tglx@linutronix.de>
There is no reason to expose all of this globally. Move everything which is
not required outside of the microcode specific code to local header files.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
arch/x86/include/asm/microcode.h | 157 +++++++-----------------
arch/x86/include/asm/microcode_amd.h | 54 --------
arch/x86/include/asm/microcode_intel.h | 89 --------------
arch/x86/kernel/cpu/microcode/amd.c | 2
arch/x86/kernel/cpu/microcode/core.c | 3
arch/x86/kernel/cpu/microcode/intel.c | 3
arch/x86/kernel/cpu/microcode/internal.h | 196 +++++++++++++++++++++++++++++++
7 files changed, 251 insertions(+), 253 deletions(-)
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -2,138 +2,79 @@
#ifndef _ASM_X86_MICROCODE_H
#define _ASM_X86_MICROCODE_H
-#include <linux/earlycpio.h>
-#include <linux/initrd.h>
-
-#include <asm/cpu.h>
-#include <asm/microcode_amd.h>
-#include <asm/microcode_intel.h>
-
-struct ucode_patch {
- struct list_head plist;
- void *data; /* Intel uses only this one */
- unsigned int size;
- u32 patch_id;
- u16 equiv_cpu;
-};
-
-extern struct list_head microcode_cache;
-
struct cpu_signature {
unsigned int sig;
unsigned int pf;
unsigned int rev;
};
-struct device;
-
-enum ucode_state {
- UCODE_OK = 0,
- UCODE_NEW,
- UCODE_UPDATED,
- UCODE_NFOUND,
- UCODE_ERROR,
-};
-
-struct microcode_ops {
- enum ucode_state (*request_microcode_fw) (int cpu, struct device *);
-
- void (*microcode_fini_cpu) (int cpu);
-
- /*
- * The generic 'microcode_core' part guarantees that
- * the callbacks below run on a target cpu when they
- * are being called.
- * See also the "Synchronization" section in microcode_core.c.
- */
- enum ucode_state (*apply_microcode) (int cpu);
- int (*collect_cpu_info) (int cpu, struct cpu_signature *csig);
-};
-
struct ucode_cpu_info {
struct cpu_signature cpu_sig;
void *mc;
};
-extern struct ucode_cpu_info ucode_cpu_info[];
-struct cpio_data find_microcode_in_initrd(const char *path, bool use_pa);
-
-#ifdef CONFIG_CPU_SUP_INTEL
-extern struct microcode_ops * __init init_intel_microcode(void);
-#else
-static inline struct microcode_ops * __init init_intel_microcode(void)
-{
- return NULL;
-}
-#endif /* CONFIG_CPU_SUP_INTEL */
-#ifdef CONFIG_CPU_SUP_AMD
-extern struct microcode_ops * __init init_amd_microcode(void);
-extern void __exit exit_amd_microcode(void);
+#ifdef CONFIG_MICROCODE
+void load_ucode_bsp(void);
+void load_ucode_ap(void);
+void microcode_bsp_resume(void);
#else
-static inline struct microcode_ops * __init init_amd_microcode(void)
-{
- return NULL;
-}
-static inline void __exit exit_amd_microcode(void) {}
+static inline void load_ucode_bsp(void) { }
+static inline void load_ucode_ap(void) { }
+static inline void microcode_bsp_resume(void) { }
#endif
-#define MAX_UCODE_COUNT 128
-
-#define QCHAR(a, b, c, d) ((a) + ((b) << 8) + ((c) << 16) + ((d) << 24))
-#define CPUID_INTEL1 QCHAR('G', 'e', 'n', 'u')
-#define CPUID_INTEL2 QCHAR('i', 'n', 'e', 'I')
-#define CPUID_INTEL3 QCHAR('n', 't', 'e', 'l')
-#define CPUID_AMD1 QCHAR('A', 'u', 't', 'h')
-#define CPUID_AMD2 QCHAR('e', 'n', 't', 'i')
-#define CPUID_AMD3 QCHAR('c', 'A', 'M', 'D')
-
-#define CPUID_IS(a, b, c, ebx, ecx, edx) \
- (!((ebx ^ (a))|(edx ^ (b))|(ecx ^ (c))))
-
-/*
- * In early loading microcode phase on BSP, boot_cpu_data is not set up yet.
- * x86_cpuid_vendor() gets vendor id for BSP.
- *
- * In 32 bit AP case, accessing boot_cpu_data needs linear address. To simplify
- * coding, we still use x86_cpuid_vendor() to get vendor id for AP.
- *
- * x86_cpuid_vendor() gets vendor information directly from CPUID.
- */
-static inline int x86_cpuid_vendor(void)
-{
- u32 eax = 0x00000000;
- u32 ebx, ecx = 0, edx;
+#ifdef CONFIG_CPU_SUP_INTEL
+/* Intel specific microcode defines. Public for IFS */
+struct microcode_header_intel {
+ unsigned int hdrver;
+ unsigned int rev;
+ unsigned int date;
+ unsigned int sig;
+ unsigned int cksum;
+ unsigned int ldrver;
+ unsigned int pf;
+ unsigned int datasize;
+ unsigned int totalsize;
+ unsigned int metasize;
+ unsigned int reserved[2];
+};
- native_cpuid(&eax, &ebx, &ecx, &edx);
+struct microcode_intel {
+ struct microcode_header_intel hdr;
+ unsigned int bits[];
+};
- if (CPUID_IS(CPUID_INTEL1, CPUID_INTEL2, CPUID_INTEL3, ebx, ecx, edx))
- return X86_VENDOR_INTEL;
+#define DEFAULT_UCODE_DATASIZE (2000)
+#define MC_HEADER_SIZE (sizeof(struct microcode_header_intel))
+#define MC_HEADER_TYPE_MICROCODE 1
+#define MC_HEADER_TYPE_IFS 2
- if (CPUID_IS(CPUID_AMD1, CPUID_AMD2, CPUID_AMD3, ebx, ecx, edx))
- return X86_VENDOR_AMD;
+static inline int intel_microcode_get_datasize(void *data)
+{
+ struct microcode_intel *mc = data;
- return X86_VENDOR_UNKNOWN;
+ return mc->hdr.datasize ? : DEFAULT_UCODE_DATASIZE;
}
-static inline unsigned int x86_cpuid_family(void)
+static inline u32 intel_get_microcode_revision(void)
{
- u32 eax = 0x00000001;
- u32 ebx, ecx = 0, edx;
+ u32 rev, dummy;
+
+ native_wrmsrl(MSR_IA32_UCODE_REV, 0);
- native_cpuid(&eax, &ebx, &ecx, &edx);
+ /* As documented in the SDM: Do a CPUID 1 here */
+ native_cpuid_eax(1);
- return x86_family(eax);
+ /* get the current revision from MSR 0x8B */
+ native_rdmsr(MSR_IA32_UCODE_REV, dummy, rev);
+
+ return rev;
}
-#ifdef CONFIG_MICROCODE
-extern void __init load_ucode_bsp(void);
-extern void load_ucode_ap(void);
-extern bool initrd_gone;
-void microcode_bsp_resume(void);
-#else
-static inline void __init load_ucode_bsp(void) { }
-static inline void load_ucode_ap(void) { }
-static inline void microcode_bsp_resume(void) { }
-#endif
+void show_ucode_info_early(void);
+
+#else /* CONFIG_CPU_SUP_INTEL */
+static inline void show_ucode_info_early(void) { }
+#endif /* !CONFIG_CPU_SUP_INTEL */
#endif /* _ASM_X86_MICROCODE_H */
--- a/arch/x86/include/asm/microcode_amd.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_X86_MICROCODE_AMD_H
-#define _ASM_X86_MICROCODE_AMD_H
-
-#define UCODE_MAGIC 0x00414d44
-#define UCODE_EQUIV_CPU_TABLE_TYPE 0x00000000
-#define UCODE_UCODE_TYPE 0x00000001
-
-#define SECTION_HDR_SIZE 8
-#define CONTAINER_HDR_SZ 12
-
-struct equiv_cpu_entry {
- u32 installed_cpu;
- u32 fixed_errata_mask;
- u32 fixed_errata_compare;
- u16 equiv_cpu;
- u16 res;
-} __attribute__((packed));
-
-struct microcode_header_amd {
- u32 data_code;
- u32 patch_id;
- u16 mc_patch_data_id;
- u8 mc_patch_data_len;
- u8 init_flag;
- u32 mc_patch_data_checksum;
- u32 nb_dev_id;
- u32 sb_dev_id;
- u16 processor_rev_id;
- u8 nb_rev_id;
- u8 sb_rev_id;
- u8 bios_api_rev;
- u8 reserved1[3];
- u32 match_reg[8];
-} __attribute__((packed));
-
-struct microcode_amd {
- struct microcode_header_amd hdr;
- unsigned int mpb[];
-};
-
-#define PATCH_MAX_SIZE (3 * PAGE_SIZE)
-
-#ifdef CONFIG_CPU_SUP_AMD
-extern void load_ucode_amd_early(unsigned int cpuid_1_eax);
-extern int __init save_microcode_in_initrd_amd(unsigned int family);
-void reload_ucode_amd(unsigned int cpu);
-#else
-static inline void load_ucode_amd_early(unsigned int cpuid_1_eax) {}
-static inline int __init
-save_microcode_in_initrd_amd(unsigned int family) { return -EINVAL; }
-static inline void reload_ucode_amd(unsigned int cpu) {}
-#endif
-#endif /* _ASM_X86_MICROCODE_AMD_H */
--- a/arch/x86/include/asm/microcode_intel.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_X86_MICROCODE_INTEL_H
-#define _ASM_X86_MICROCODE_INTEL_H
-
-struct microcode_header_intel {
- unsigned int hdrver;
- unsigned int rev;
- unsigned int date;
- unsigned int sig;
- unsigned int cksum;
- unsigned int ldrver;
- unsigned int pf;
- unsigned int datasize;
- unsigned int totalsize;
- unsigned int metasize;
- unsigned int reserved[2];
-};
-
-struct microcode_intel {
- struct microcode_header_intel hdr;
- unsigned int bits[];
-};
-
-/* microcode format is extended from prescott processors */
-struct extended_signature {
- unsigned int sig;
- unsigned int pf;
- unsigned int cksum;
-};
-
-struct extended_sigtable {
- unsigned int count;
- unsigned int cksum;
- unsigned int reserved[3];
- struct extended_signature sigs[];
-};
-
-#define DEFAULT_UCODE_DATASIZE (2000)
-#define MC_HEADER_SIZE (sizeof(struct microcode_header_intel))
-#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE)
-#define EXT_HEADER_SIZE (sizeof(struct extended_sigtable))
-#define EXT_SIGNATURE_SIZE (sizeof(struct extended_signature))
-#define MC_HEADER_TYPE_MICROCODE 1
-#define MC_HEADER_TYPE_IFS 2
-
-#define get_totalsize(mc) \
- (((struct microcode_intel *)mc)->hdr.datasize ? \
- ((struct microcode_intel *)mc)->hdr.totalsize : \
- DEFAULT_UCODE_TOTALSIZE)
-
-static inline int intel_microcode_get_datasize(void *data)
-{
- struct microcode_intel *mc = data;
-
- return mc->hdr.datasize ? : DEFAULT_UCODE_DATASIZE;
-}
-
-#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE)
-
-static inline u32 intel_get_microcode_revision(void)
-{
- u32 rev, dummy;
-
- native_wrmsrl(MSR_IA32_UCODE_REV, 0);
-
- /* As documented in the SDM: Do a CPUID 1 here */
- native_cpuid_eax(1);
-
- /* get the current revision from MSR 0x8B */
- native_rdmsr(MSR_IA32_UCODE_REV, dummy, rev);
-
- return rev;
-}
-
-#ifdef CONFIG_CPU_SUP_INTEL
-extern void __init load_ucode_intel_bsp(void);
-extern void load_ucode_intel_ap(void);
-extern void show_ucode_info_early(void);
-extern int __init save_microcode_in_initrd_intel(void);
-void reload_ucode_intel(void);
-#else
-static inline __init void load_ucode_intel_bsp(void) {}
-static inline void load_ucode_intel_ap(void) {}
-static inline void show_ucode_info_early(void) {}
-static inline int __init save_microcode_in_initrd_intel(void) { return -EINVAL; }
-static inline void reload_ucode_intel(void) {}
-#endif
-
-#endif /* _ASM_X86_MICROCODE_INTEL_H */
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -35,6 +35,8 @@
#include <asm/cpu.h>
#include <asm/msr.h>
+#include "internal.h"
+
static struct equiv_cpu_table {
unsigned int num_entries;
struct equiv_cpu_entry *entry;
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -33,11 +33,12 @@
#include <asm/cpu_device_id.h>
#include <asm/perf_event.h>
-#include <asm/microcode.h>
#include <asm/processor.h>
#include <asm/cmdline.h>
#include <asm/setup.h>
+#include "internal.h"
+
#define DRIVER_VERSION "2.2"
static struct microcode_ops *microcode_ops;
--- a/arch/x86/kernel/cpu/microcode/intel.c
+++ b/arch/x86/kernel/cpu/microcode/intel.c
@@ -32,11 +32,12 @@
#include <asm/intel-family.h>
#include <asm/processor.h>
-#include <asm/microcode.h>
#include <asm/tlbflush.h>
#include <asm/setup.h>
#include <asm/msr.h>
+#include "internal.h"
+
static const char ucode_path[] = "kernel/x86/microcode/GenuineIntel.bin";
/* Current microcode patch used in early patching on the APs. */
--- /dev/null
+++ b/arch/x86/kernel/cpu/microcode/internal.h
@@ -0,0 +1,196 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _X86_MICROCODE_INTERNAL_H
+#define _X86_MICROCODE_INTERNAL_H
+
+#include <linux/earlycpio.h>
+#include <linux/initrd.h>
+
+#include <asm/cpu.h>
+#include <asm/microcode.h>
+
+struct ucode_patch {
+ struct list_head plist;
+ void *data; /* Intel uses only this one */
+ unsigned int size;
+ u32 patch_id;
+ u16 equiv_cpu;
+};
+
+extern struct list_head microcode_cache;
+
+struct device;
+
+enum ucode_state {
+ UCODE_OK = 0,
+ UCODE_NEW,
+ UCODE_UPDATED,
+ UCODE_NFOUND,
+ UCODE_ERROR,
+};
+
+struct microcode_ops {
+ enum ucode_state (*request_microcode_fw)(int cpu, struct device *dev);
+
+ void (*microcode_fini_cpu)(int cpu);
+
+ /*
+ * The generic 'microcode_core' part guarantees that
+ * the callbacks below run on a target cpu when they
+ * are being called.
+ * See also the "Synchronization" section in microcode_core.c.
+ */
+ enum ucode_state (*apply_microcode)(int cpu);
+ int (*collect_cpu_info)(int cpu, struct cpu_signature *csig);
+};
+
+extern struct ucode_cpu_info ucode_cpu_info[];
+struct cpio_data find_microcode_in_initrd(const char *path, bool use_pa);
+
+#define MAX_UCODE_COUNT 128
+
+#define QCHAR(a, b, c, d) ((a) + ((b) << 8) + ((c) << 16) + ((d) << 24))
+#define CPUID_INTEL1 QCHAR('G', 'e', 'n', 'u')
+#define CPUID_INTEL2 QCHAR('i', 'n', 'e', 'I')
+#define CPUID_INTEL3 QCHAR('n', 't', 'e', 'l')
+#define CPUID_AMD1 QCHAR('A', 'u', 't', 'h')
+#define CPUID_AMD2 QCHAR('e', 'n', 't', 'i')
+#define CPUID_AMD3 QCHAR('c', 'A', 'M', 'D')
+
+#define CPUID_IS(a, b, c, ebx, ecx, edx) \
+ (!(((ebx) ^ (a)) | ((edx) ^ (b)) | ((ecx) ^ (c))))
+
+/*
+ * In early loading microcode phase on BSP, boot_cpu_data is not set up yet.
+ * x86_cpuid_vendor() gets vendor id for BSP.
+ *
+ * In 32 bit AP case, accessing boot_cpu_data needs linear address. To simplify
+ * coding, we still use x86_cpuid_vendor() to get vendor id for AP.
+ *
+ * x86_cpuid_vendor() gets vendor information directly from CPUID.
+ */
+static inline int x86_cpuid_vendor(void)
+{
+ u32 eax = 0x00000000;
+ u32 ebx, ecx = 0, edx;
+
+ native_cpuid(&eax, &ebx, &ecx, &edx);
+
+ if (CPUID_IS(CPUID_INTEL1, CPUID_INTEL2, CPUID_INTEL3, ebx, ecx, edx))
+ return X86_VENDOR_INTEL;
+
+ if (CPUID_IS(CPUID_AMD1, CPUID_AMD2, CPUID_AMD3, ebx, ecx, edx))
+ return X86_VENDOR_AMD;
+
+ return X86_VENDOR_UNKNOWN;
+}
+
+static inline unsigned int x86_cpuid_family(void)
+{
+ u32 eax = 0x00000001;
+ u32 ebx, ecx = 0, edx;
+
+ native_cpuid(&eax, &ebx, &ecx, &edx);
+
+ return x86_family(eax);
+}
+
+extern bool initrd_gone;
+
+#ifdef CONFIG_CPU_SUP_AMD
+#define UCODE_MAGIC 0x00414d44
+#define UCODE_EQUIV_CPU_TABLE_TYPE 0x00000000
+#define UCODE_UCODE_TYPE 0x00000001
+
+#define SECTION_HDR_SIZE 8
+#define CONTAINER_HDR_SZ 12
+
+struct equiv_cpu_entry {
+ u32 installed_cpu;
+ u32 fixed_errata_mask;
+ u32 fixed_errata_compare;
+ u16 equiv_cpu;
+ u16 res;
+} __packed;
+
+struct microcode_header_amd {
+ u32 data_code;
+ u32 patch_id;
+ u16 mc_patch_data_id;
+ u8 mc_patch_data_len;
+ u8 init_flag;
+ u32 mc_patch_data_checksum;
+ u32 nb_dev_id;
+ u32 sb_dev_id;
+ u16 processor_rev_id;
+ u8 nb_rev_id;
+ u8 sb_rev_id;
+ u8 bios_api_rev;
+ u8 reserved1[3];
+ u32 match_reg[8];
+} __packed;
+
+struct microcode_amd {
+ struct microcode_header_amd hdr;
+ unsigned int mpb[];
+};
+
+#define PATCH_MAX_SIZE (3 * PAGE_SIZE)
+
+void load_ucode_amd_bsp(unsigned int family);
+void load_ucode_amd_ap(unsigned int family);
+void load_ucode_amd_early(unsigned int cpuid_1_eax);
+int save_microcode_in_initrd_amd(unsigned int family);
+void reload_ucode_amd(unsigned int cpu);
+struct microcode_ops *init_amd_microcode(void);
+void exit_amd_microcode(void);
+#else /* CONFIG_MICROCODE_AMD */
+static inline void load_ucode_amd_bsp(unsigned int family) { }
+static inline void load_ucode_amd_ap(unsigned int family) { }
+static inline void load_ucode_amd_early(unsigned int family) { }
+static inline int save_microcode_in_initrd_amd(unsigned int family) { return -EINVAL; }
+static inline void reload_ucode_amd(unsigned int cpu) { }
+static inline struct microcode_ops *init_amd_microcode(void) { return NULL; }
+static inline void exit_amd_microcode(void) { }
+#endif /* !CONFIG_MICROCODE_AMD */
+
+#ifdef CONFIG_CPU_SUP_INTEL
+struct extended_signature {
+ unsigned int sig;
+ unsigned int pf;
+ unsigned int cksum;
+};
+
+struct extended_sigtable {
+ unsigned int count;
+ unsigned int cksum;
+ unsigned int reserved[3];
+ struct extended_signature sigs[];
+};
+
+#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE)
+#define EXT_HEADER_SIZE (sizeof(struct extended_sigtable))
+#define EXT_SIGNATURE_SIZE (sizeof(struct extended_signature))
+
+#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE)
+
+static inline int get_totalsize(void *mc)
+{
+ struct microcode_intel *intel_mc = (struct microcode_intel *)mc;
+
+ return intel_mc->hdr.datasize ? intel_mc->hdr.totalsize : DEFAULT_UCODE_TOTALSIZE;
+}
+
+void load_ucode_intel_bsp(void);
+void load_ucode_intel_ap(void);
+int save_microcode_in_initrd_intel(void);
+void reload_ucode_intel(void);
+struct microcode_ops *init_intel_microcode(void);
+#else /* CONFIG_CPU_SUP_INTEL */
+static inline void load_ucode_intel_bsp(void) { }
+static inline void load_ucode_intel_ap(void) { }
+static inline int save_microcode_in_initrd_intel(void) { return -EINVAL; }
+static inline void reload_ucode_intel(void) { }
+static inline struct microcode_ops *init_intel_microcode(void) { return NULL; }
+#endif /* !CONFIG_CPU_SUP_INTEL */
+
+#endif /* _X86_MICROCODE_INTERNAL_H */
next prev parent reply other threads:[~2023-08-10 18:37 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-10 18:37 [patch 00/30] x86/microcode: Cleanup and late loading enhancements Thomas Gleixner
2023-08-10 18:37 ` [patch 01/30] x86/mm: Remove unused microcode.h include Thomas Gleixner
2023-08-10 18:37 ` [patch 02/30] x86/microcode: Hide the config knob Thomas Gleixner
2023-08-10 20:41 ` Ashok Raj
2023-08-11 11:22 ` Borislav Petkov
2023-08-10 18:37 ` [patch 03/30] x86/microcode/intel: Move microcode functions out of cpu/intel.c Thomas Gleixner
2023-08-10 18:37 ` [patch 04/30] x86/microcode: Include vendor headers into microcode.h Thomas Gleixner
2023-08-10 18:37 ` [patch 05/30] x86/microcode: Make reload_early_microcode() static Thomas Gleixner
2023-08-10 18:37 ` [patch 06/30] x86/microcode/intel: Rename get_datasize() since its used externally Thomas Gleixner
2023-08-10 18:37 ` Thomas Gleixner [this message]
2023-08-10 18:37 ` [patch 08/30] x86/microcode/intel: Rip out mixed stepping support for Intel CPUs Thomas Gleixner
2023-08-11 22:25 ` Borislav Petkov
2023-08-12 7:16 ` Thomas Gleixner
2023-08-10 18:37 ` [patch 09/30] x86/microcode/intel: Remove debug code Thomas Gleixner
2023-08-11 10:45 ` Nikolay Borisov
2023-08-10 18:37 ` [patch 10/30] x86/microcode: Remove pointless mutex Thomas Gleixner
2023-08-10 18:37 ` [patch 11/30] x86/microcode/intel: Simplify scan_microcode() Thomas Gleixner
2023-08-10 18:37 ` [patch 12/30] x86/microcode/intel: Simplify and rename generic_load_microcode() Thomas Gleixner
2023-08-10 18:37 ` [patch 13/30] x86/microcode/intel: Cleanup code further Thomas Gleixner
2023-08-11 11:01 ` Nikolay Borisov
2023-08-10 18:37 ` [patch 14/30] x86/microcode/intel: Simplify early loading Thomas Gleixner
2023-08-10 18:37 ` [patch 15/30] x86/microcode/intel: Save the microcode only after a successful late-load Thomas Gleixner
2023-08-10 18:37 ` [patch 16/30] x86/microcode/intel: Switch to kvmalloc() Thomas Gleixner
2023-08-10 18:37 ` [patch 17/30] x86/microcode/intel: Unify microcode apply() functions Thomas Gleixner
2023-08-10 18:37 ` [patch 18/30] x86/microcode: Handle "nosmt" correctly Thomas Gleixner
2023-08-10 18:37 ` [patch 19/30] x86/microcode: Clarify the late load logic Thomas Gleixner
2023-08-10 18:37 ` [patch 20/30] x86/microcode: Sanitize __wait_for_cpus() Thomas Gleixner
2023-08-10 18:37 ` [patch 21/30] x86/microcode: Add per CPU result state Thomas Gleixner
2023-08-10 18:37 ` [patch 22/30] x86/microcode: Add per CPU control field Thomas Gleixner
2023-08-10 18:38 ` [patch 23/30] x86/microcode: Provide new control functions Thomas Gleixner
2023-08-10 20:25 ` Peter Zijlstra
2023-08-10 18:38 ` [patch 24/30] x86/microcode: Replace the all in one rendevouz handler Thomas Gleixner
2023-08-10 18:38 ` [patch 25/30] x86/microcode: Rendezvous and load in NMI Thomas Gleixner
2023-08-10 18:38 ` [patch 26/30] x86/microcode: Protect against instrumentation Thomas Gleixner
2023-08-10 20:36 ` Peter Zijlstra
2023-08-11 9:19 ` Thomas Gleixner
2023-08-10 18:38 ` [patch 27/30] x86/apic: Provide apic_force_nmi_on_cpu() Thomas Gleixner
2023-08-10 18:38 ` [patch 28/30] x86/microcode: Handle "offline" CPUs correctly Thomas Gleixner
2023-08-10 20:46 ` Peter Zijlstra
2023-08-10 20:50 ` Ashok Raj
2023-08-10 21:05 ` Peter Zijlstra
2023-08-10 21:49 ` Ashok Raj
2023-08-10 22:29 ` Peter Zijlstra
2023-08-10 23:02 ` Ashok Raj
2023-08-11 1:19 ` Thomas Gleixner
2023-08-11 1:31 ` Thomas Gleixner
2023-08-11 9:36 ` Thomas Gleixner
2023-08-12 16:47 ` Thomas Gleixner
2023-08-10 18:38 ` [patch 29/30] x86/microcode: Prepare for minimal revision check Thomas Gleixner
2023-08-10 20:54 ` Peter Zijlstra
2023-08-11 9:38 ` Thomas Gleixner
2023-08-11 14:20 ` Arjan van de Ven
2023-08-10 18:38 ` [patch 30/30] x86/microcode/intel: Add a minimum required revision for late-loads Thomas Gleixner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230810160805.362918410@linutronix.de \
--to=tglx@linutronix.de \
--cc=arjan@linux.intel.com \
--cc=ashok.raj@intel.com \
--cc=bp@alien8.de \
--cc=linux-kernel@vger.kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome