[PATCH V2 2/6] pinctrl: sprd: Fix the incorrect mask and shift definition

[Linhua Xu <Linhua.xu@unisoc.com>]

From: Linhua Xu <Linhua.Xu@unisoc.com>

Pull-up and pull-down are mutually exclusive. When setting one of them,
the bit of the other needs to be clear. Now, there are cases where pull-up
and pull-down are set at the same time in the code, thus fix them.

Signed-off-by: Linhua Xu <Linhua.Xu@unisoc.com>
---
 drivers/pinctrl/sprd/pinctrl-sprd.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/pinctrl/sprd/pinctrl-sprd.c b/drivers/pinctrl/sprd/pinctrl-sprd.c
index 25fb9ce9ad78..5b9126b2cde2 100644
--- a/drivers/pinctrl/sprd/pinctrl-sprd.c
+++ b/drivers/pinctrl/sprd/pinctrl-sprd.c
@@ -58,21 +58,21 @@
 #define DRIVE_STRENGTH_SHIFT		19
 
 #define SLEEP_PULL_DOWN			BIT(2)
-#define SLEEP_PULL_DOWN_MASK		0x1
+#define SLEEP_PULL_DOWN_MASK		GENMASK(1, 0)
 #define SLEEP_PULL_DOWN_SHIFT		2
 
 #define PULL_DOWN			BIT(6)
-#define PULL_DOWN_MASK			0x1
+#define PULL_DOWN_MASK			(GENMASK(1, 0) | BIT(6))
 #define PULL_DOWN_SHIFT			6
 
 #define SLEEP_PULL_UP			BIT(3)
-#define SLEEP_PULL_UP_MASK		0x1
-#define SLEEP_PULL_UP_SHIFT		3
+#define SLEEP_PULL_UP_MASK		GENMASK(1, 0)
+#define SLEEP_PULL_UP_SHIFT		2
 
 #define PULL_UP_4_7K			(BIT(12) | BIT(7))
 #define PULL_UP_20K			BIT(7)
-#define PULL_UP_MASK			0x21
-#define PULL_UP_SHIFT			7
+#define PULL_UP_MASK			(GENMASK(1, 0) | BIT(6))
+#define PULL_UP_SHIFT			6
 
 #define INPUT_SCHMITT			BIT(11)
 #define INPUT_SCHMITT_MASK		0x1
-- 
2.17.1