mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Hsiao Chien Sung <shawn.sung@mediatek.com>
To: AngeloGioacchino Del Regno 
	<angelogioacchino.delregno@collabora.com>,
	Chun-Kuang Hu <chunkuang.hu@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Matthias Brugger <matthias.bgg@gmail.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>,
	David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
	Rob Herring <robh+dt@kernel.org>,
	"Chen-Yu Tsai" <wenst@chromium.org>, Sean Paul <sean@poorly.run>,
	<dri-devel@lists.freedesktop.org>,
	<linux-mediatek@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	Singo Chang <singo.chang@mediatek.com>,
	Nancy Lin <nancy.lin@mediatek.com>,
	Jason-JH Lin <jason-jh.lin@mediatek.com>,
	Hsiao Chien Sung <shawn.sung@mediatek.com>
Subject: [PATCH v3 11/11] drm/mediatek: Support CRC in VDOSYS1
Date: Tue, 17 Oct 2023 14:47:17 +0800	[thread overview]
Message-ID: <20231017064717.21616-12-shawn.sung@mediatek.com> (raw)
In-Reply-To: <20231017064717.21616-1-shawn.sung@mediatek.com>

We choose Mixer as CRC generator in VDOSYS1 since
its frame done event will trigger vblanks, we can know
when is safe to retrieve CRC of the frame.

In VDOSYS1, there's no image procession after Mixer,
unlike OVL in VDOSYS0, Mixer's CRC will include all the
effects that are applied to the frame.

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_disp_drv.h       |  3 +
 .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c   | 21 ++++++
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c   |  3 +
 drivers/gpu/drm/mediatek/mtk_ethdr.c          | 73 +++++++++++++++++++
 drivers/gpu/drm/mediatek/mtk_ethdr.h          |  5 ++
 5 files changed, 105 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_drv.h b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
index 08cc2d2fef9f..4d6e8b667bc3 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
+++ b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
@@ -133,6 +133,9 @@ unsigned int mtk_ovl_adaptor_layer_nr(struct device *dev);
 struct device *mtk_ovl_adaptor_dma_dev_get(struct device *dev);
 const u32 *mtk_ovl_adaptor_get_formats(struct device *dev);
 size_t mtk_ovl_adaptor_get_num_formats(struct device *dev);
+size_t mtk_ovl_adaptor_crc_cnt(struct device *dev);
+u32 *mtk_ovl_adaptor_crc_entry(struct device *dev);
+void mtk_ovl_adaptor_crc_read(struct device *dev);
 
 void mtk_rdma_bypass_shadow(struct device *dev);
 int mtk_rdma_clk_enable(struct device *dev);
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
index b69ac90b2e65..b4329d23d22d 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
@@ -205,6 +205,27 @@ void mtk_ovl_adaptor_layer_config(struct device *dev, unsigned int idx,
 	mtk_ethdr_layer_config(ethdr, idx, state, cmdq_pkt);
 }
 
+size_t mtk_ovl_adaptor_crc_cnt(struct device *dev)
+{
+	struct mtk_disp_ovl_adaptor *ovl_adaptor = dev_get_drvdata(dev);
+
+	return mtk_ethdr_crc_cnt(ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_ETHDR0]);
+}
+
+u32 *mtk_ovl_adaptor_crc_entry(struct device *dev)
+{
+	struct mtk_disp_ovl_adaptor *ovl_adaptor = dev_get_drvdata(dev);
+
+	return mtk_ethdr_crc_entry(ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_ETHDR0]);
+}
+
+void mtk_ovl_adaptor_crc_read(struct device *dev)
+{
+	struct mtk_disp_ovl_adaptor *ovl_adaptor = dev_get_drvdata(dev);
+
+	mtk_ethdr_crc_read(ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_ETHDR0]);
+}
+
 void mtk_ovl_adaptor_config(struct device *dev, unsigned int w,
 			    unsigned int h, unsigned int vrefresh,
 			    unsigned int bpc, struct cmdq_pkt *cmdq_pkt)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index 1118efcde98a..ffa4868b1222 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -404,6 +404,9 @@ static const struct mtk_ddp_comp_funcs ddp_ovl_adaptor = {
 	.clk_enable = mtk_ovl_adaptor_clk_enable,
 	.clk_disable = mtk_ovl_adaptor_clk_disable,
 	.config = mtk_ovl_adaptor_config,
+	.crc_cnt = mtk_ovl_adaptor_crc_cnt,
+	.crc_entry = mtk_ovl_adaptor_crc_entry,
+	.crc_read = mtk_ovl_adaptor_crc_read,
 	.start = mtk_ovl_adaptor_start,
 	.stop = mtk_ovl_adaptor_stop,
 	.layer_nr = mtk_ovl_adaptor_layer_nr,
diff --git a/drivers/gpu/drm/mediatek/mtk_ethdr.c b/drivers/gpu/drm/mediatek/mtk_ethdr.c
index 648e14e85bd0..3fec052212ca 100644
--- a/drivers/gpu/drm/mediatek/mtk_ethdr.c
+++ b/drivers/gpu/drm/mediatek/mtk_ethdr.c
@@ -24,6 +24,9 @@
 #define MIX_FME_CPL_INTEN			BIT(1)
 #define MIX_INTSTA			0x8
 #define MIX_EN				0xc
+#define MIX_TRIG			0x10
+#define MIX_TRIG_CRC_EN				BIT(8)
+#define MIX_TRIG_CRC_RST			BIT(9)
 #define MIX_RST				0x14
 #define MIX_ROI_SIZE			0x18
 #define MIX_DATAPATH_CON		0x1c
@@ -39,6 +42,11 @@
 #define PREMULTI_SOURCE				(3 << 12)
 #define MIX_L_SRC_SIZE(n)		(0x30 + 0x18 * (n))
 #define MIX_L_SRC_OFFSET(n)		(0x34 + 0x18 * (n))
+
+/* CRC register offsets for odd and even lines */
+#define MIX_CRC_ODD			0x110
+#define MIX_CRC_EVEN			0x114
+
 #define MIX_FUNC_DCM0			0x120
 #define MIX_FUNC_DCM1			0x124
 #define MIX_FUNC_DCM_ENABLE			0xffffffff
@@ -74,6 +82,17 @@ struct mtk_ethdr_comp {
 	struct cmdq_client_reg	cmdq_base;
 };
 
+/**
+ * struct mtk_ethdr - ethdr driver data
+ * @ethdr_comp: components of ethdr(mixer)
+ * @ethdr_clk: clocks of ethdr components
+ * @mmsys_dev: mmsys device that ethdr binds to
+ * @vblank_cb: callback function when vblank irq occurs
+ * @vblank_cb_data: data fo vblank callback
+ * @irq: irq that triggers irq handler
+ * @reset_ctl: reset control of ethdr
+ * @crc: crc information
+ */
 struct mtk_ethdr {
 	struct mtk_ethdr_comp	ethdr_comp[ETHDR_ID_MAX];
 	struct clk_bulk_data	ethdr_clk[ETHDR_CLK_NUM];
@@ -82,6 +101,7 @@ struct mtk_ethdr {
 	void			*vblank_cb_data;
 	int			irq;
 	struct reset_control	*reset_ctl;
+	struct mtk_drm_crc	crc;
 };
 
 static const char * const ethdr_clk_str[] = {
@@ -100,6 +120,32 @@ static const char * const ethdr_clk_str[] = {
 	"vdo_be_async",
 };
 
+static const u32 ethdr_crc_ofs[] = {
+	MIX_CRC_ODD,
+	MIX_CRC_EVEN,
+};
+
+size_t mtk_ethdr_crc_cnt(struct device *dev)
+{
+	struct mtk_ethdr *priv = dev_get_drvdata(dev);
+
+	return priv->crc.cnt;
+}
+
+u32 *mtk_ethdr_crc_entry(struct device *dev)
+{
+	struct mtk_ethdr *priv = dev_get_drvdata(dev);
+
+	return priv->crc.va;
+}
+
+void mtk_ethdr_crc_read(struct device *dev)
+{
+	struct mtk_ethdr *priv = dev_get_drvdata(dev);
+
+	mtk_drm_crc_read(&priv->crc, priv->ethdr_comp[ETHDR_MIXER].regs);
+}
+
 void mtk_ethdr_register_vblank_cb(struct device *dev,
 				  void (*vblank_cb)(void *),
 				  void *vblank_cb_data)
@@ -267,6 +313,13 @@ void mtk_ethdr_start(struct device *dev)
 	struct mtk_ethdr_comp *mixer = &priv->ethdr_comp[ETHDR_MIXER];
 
 	writel(1, mixer->regs + MIX_EN);
+
+	if (priv->crc.cnt) {
+		writel(MIX_TRIG_CRC_EN, mixer->regs + MIX_TRIG);
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+		mtk_drm_crc_cmdq_start(&priv->crc);
+#endif
+	}
 }
 
 void mtk_ethdr_stop(struct device *dev)
@@ -274,6 +327,9 @@ void mtk_ethdr_stop(struct device *dev)
 	struct mtk_ethdr *priv = dev_get_drvdata(dev);
 	struct mtk_ethdr_comp *mixer = &priv->ethdr_comp[ETHDR_MIXER];
 
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+	mtk_drm_crc_cmdq_stop(&priv->crc);
+#endif
 	writel(0, mixer->regs + MIX_EN);
 	writel(1, mixer->regs + MIX_RST);
 	reset_control_reset(priv->reset_ctl);
@@ -328,6 +384,10 @@ static int mtk_ethdr_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;
 
+	mtk_drm_crc_init(&priv->crc,
+			 ethdr_crc_ofs, ARRAY_SIZE(ethdr_crc_ofs),
+			 MIX_TRIG, MIX_TRIG_CRC_RST);
+
 	for (i = 0; i < ETHDR_ID_MAX; i++) {
 		priv->ethdr_comp[i].dev = dev;
 		priv->ethdr_comp[i].regs = of_iomap(dev->of_node, i);
@@ -336,6 +396,16 @@ static int mtk_ethdr_probe(struct platform_device *pdev)
 					      &priv->ethdr_comp[i].cmdq_base, i);
 		if (ret)
 			dev_dbg(dev, "get mediatek,gce-client-reg fail!\n");
+
+		if (i == ETHDR_MIXER) {
+			if (of_property_read_u32_index(dev->of_node,
+						       "mediatek,gce-events", i,
+						       &priv->crc.cmdq_event)) {
+				dev_warn(dev, "failed to get gce-events for crc\n");
+			}
+			priv->crc.cmdq_reg = &priv->ethdr_comp[i].cmdq_base;
+			mtk_drm_crc_cmdq_create(dev, &priv->crc);
+		}
 #endif
 		dev_dbg(dev, "[DRM]regs:0x%p, node:%d\n", priv->ethdr_comp[i].regs, i);
 	}
@@ -376,6 +446,9 @@ static int mtk_ethdr_probe(struct platform_device *pdev)
 
 static int mtk_ethdr_remove(struct platform_device *pdev)
 {
+	struct mtk_ethdr *priv = dev_get_drvdata(&pdev->dev);
+
+	mtk_drm_crc_destroy(&priv->crc);
 	component_del(&pdev->dev, &mtk_ethdr_component_ops);
 	return 0;
 }
diff --git a/drivers/gpu/drm/mediatek/mtk_ethdr.h b/drivers/gpu/drm/mediatek/mtk_ethdr.h
index 81af9edea3f7..d17d7256bd12 100644
--- a/drivers/gpu/drm/mediatek/mtk_ethdr.h
+++ b/drivers/gpu/drm/mediatek/mtk_ethdr.h
@@ -22,4 +22,9 @@ void mtk_ethdr_register_vblank_cb(struct device *dev,
 void mtk_ethdr_unregister_vblank_cb(struct device *dev);
 void mtk_ethdr_enable_vblank(struct device *dev);
 void mtk_ethdr_disable_vblank(struct device *dev);
+
+size_t mtk_ethdr_crc_cnt(struct device *dev);
+u32 *mtk_ethdr_crc_entry(struct device *dev);
+void mtk_ethdr_crc_read(struct device *dev);
+
 #endif
-- 
2.18.0


      parent reply	other threads:[~2023-10-17  6:47 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-17  6:47 [PATCH v3 00/11] Support IGT in display driver Hsiao Chien Sung
2023-10-17  6:47 ` [PATCH v3 01/11] soc: mediatek: Add register definitions for GCE Hsiao Chien Sung
2023-10-17  6:47 ` [PATCH v3 02/11] soc: mediatek: Disable 9-bit alpha in ETHDR Hsiao Chien Sung
2023-10-17  6:47 ` [PATCH v3 03/11] dt-bindings: display: mediatek: ovl: Modify rules for MT8195/MT8188 Hsiao Chien Sung
2023-10-17 20:19   ` Rob Herring
2023-10-17  6:47 ` [PATCH v3 04/11] drm/mediatek: Add OVL compatible name for MT8195 Hsiao Chien Sung
2023-10-17  6:47 ` [PATCH v3 05/11] drm/mediatek: Set DRM mode configs accordingly Hsiao Chien Sung
2023-11-22  5:50   ` CK Hu (胡俊光)
2023-10-17  6:47 ` [PATCH v3 06/11] drm/mediatek: Support alpha blending in display driver Hsiao Chien Sung
2023-10-17  6:47 ` [PATCH v3 07/11] drm/mediatek: Support alpha blending in VDOSYS0 Hsiao Chien Sung
2023-11-23  9:22   ` CK Hu (胡俊光)
2023-11-29  9:45     ` Shawn Sung (宋孝謙)
2023-10-17  6:47 ` [PATCH v3 08/11] drm/mediatek: Support alpha blending in VDOSYS1 Hsiao Chien Sung
2023-11-24  6:04   ` CK Hu (胡俊光)
2023-10-17  6:47 ` [PATCH v3 09/11] drm/mediatek: Support CRC in display driver Hsiao Chien Sung
2023-10-17  6:47 ` [PATCH v3 10/11] drm/mediatek: Support CRC in VDOSYS0 Hsiao Chien Sung
2023-11-30  1:19   ` CK Hu (胡俊光)
2023-10-17  6:47 ` Hsiao Chien Sung [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231017064717.21616-12-shawn.sung@mediatek.com \
    --to=shawn.sung@mediatek.com \
    --cc=airlied@gmail.com \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=chunkuang.hu@kernel.org \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jason-jh.lin@mediatek.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=nancy.lin@mediatek.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=sean@poorly.run \
    --cc=singo.chang@mediatek.com \
    --cc=wenst@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®