From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: "John W. Linville" <linville@tuxdriver.com>,
Kalle Valo <kvalo@kernel.org>,
Larry Finger <Larry.Finger@lwfinger.net>,
linux-wireless@vger.kernel.org, Ping-Ke Shih <pkshih@realtek.com>,
Bjorn Helgaas <bhelgaas@google.com>,
linux-kernel@vger.kernel.org
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH v2 03/10] wifi: rtlwifi: Convert to use PCIe capability accessors
Date: Fri, 24 Nov 2023 10:47:18 +0200 [thread overview]
Message-ID: <20231124084725.12738-4-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20231124084725.12738-1-ilpo.jarvinen@linux.intel.com>
The rtlwifi driver accesses PCIe capabilities through custom config
offsets. Convert the accesses to use the normal PCIe capability
accessors.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/net/wireless/realtek/rtlwifi/pci.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/pci.c b/drivers/net/wireless/realtek/rtlwifi/pci.c
index b118df035243..a29d7df6fff5 100644
--- a/drivers/net/wireless/realtek/rtlwifi/pci.c
+++ b/drivers/net/wireless/realtek/rtlwifi/pci.c
@@ -64,7 +64,7 @@ static void _rtl_pci_update_default_setting(struct ieee80211_hw *hw)
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
u8 pcibridge_vendor = pcipriv->ndis_adapter.pcibridge_vendor;
- u8 init_aspm;
+ u16 init_aspm;
ppsc->reg_rfps_level = 0;
ppsc->support_aspm = false;
@@ -151,9 +151,10 @@ static void _rtl_pci_update_default_setting(struct ieee80211_hw *hw)
/* toshiba aspm issue, toshiba will set aspm selfly
* so we should not set aspm in driver
*/
- pci_read_config_byte(rtlpci->pdev, 0x80, &init_aspm);
+ pcie_capability_read_word(rtlpci->pdev, PCI_EXP_LNKCTL, &init_aspm);
if (rtlpriv->rtlhal.hw_type == HARDWARE_TYPE_RTL8192SE &&
- init_aspm == 0x43)
+ ((u8)init_aspm) == (PCI_EXP_LNKCTL_ASPM_L0S |
+ PCI_EXP_LNKCTL_ASPM_L1 | PCI_EXP_LNKCTL_CCC))
ppsc->support_aspm = false;
}
@@ -203,7 +204,7 @@ static void rtl_pci_disable_aspm(struct ieee80211_hw *hw)
/*Retrieve original configuration settings. */
u8 linkctrl_reg = pcipriv->ndis_adapter.linkctrl_reg;
u16 aspmlevel = 0;
- u8 tmp_u1b = 0;
+ u16 tmp_u1b = 0;
if (!ppsc->support_aspm)
return;
@@ -221,10 +222,10 @@ static void rtl_pci_disable_aspm(struct ieee80211_hw *hw)
}
/*for promising device will in L0 state after an I/O. */
- pci_read_config_byte(rtlpci->pdev, 0x80, &tmp_u1b);
+ pcie_capability_read_word(rtlpci->pdev, PCI_EXP_LNKCTL, &tmp_u1b);
/*Set corresponding value. */
- aspmlevel |= BIT(0) | BIT(1);
+ aspmlevel |= PCI_EXP_LNKCTL_ASPM_L0S | PCI_EXP_LNKCTL_ASPM_L1;
linkctrl_reg &= ~aspmlevel;
_rtl_pci_platform_switch_device_pci_aspm(hw, linkctrl_reg);
@@ -351,9 +352,8 @@ static void rtl_pci_parse_configuration(struct pci_dev *pdev,
rtl_dbg(rtlpriv, COMP_INIT, DBG_TRACE, "Link Control Register =%x\n",
pcipriv->ndis_adapter.linkctrl_reg);
- pci_read_config_byte(pdev, 0x98, &tmp);
- tmp |= BIT(4);
- pci_write_config_byte(pdev, 0x98, tmp);
+ pcie_capability_set_word(pdev, PCI_EXP_DEVCTL2,
+ PCI_EXP_DEVCTL2_COMP_TMOUT_DIS);
tmp = 0x17;
pci_write_config_byte(pdev, 0x70f, tmp);
--
2.30.2
next prev parent reply other threads:[~2023-11-24 8:48 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-24 8:47 [PATCH v2 00/10] wifi: rtlwifi: PCI related fixes & cleanups Ilpo Järvinen
2023-11-24 8:47 ` [PATCH v2 01/10] wifi: rtlwifi: Remove bogus and dangerous ASPM disable/enable code Ilpo Järvinen
2023-12-01 12:41 ` Kalle Valo
2023-11-24 8:47 ` [PATCH v2 02/10] wifi: rtlwifi: Convert LNKCTL change to PCIe cap RMW accessors Ilpo Järvinen
2023-11-24 8:47 ` Ilpo Järvinen [this message]
2023-11-24 8:47 ` [PATCH v2 04/10] wifi: rtlwifi: rtl8821ae: Remove unnecessary PME_Status bit set Ilpo Järvinen
2023-11-24 8:47 ` [PATCH v2 05/10] wifi: rtlwifi: rtl8821ae: Reverse PM Capability exists check Ilpo Järvinen
2023-11-24 8:47 ` [PATCH v2 06/10] wifi: rtlwifi: rtl8821ae: Use pci_find_capability() Ilpo Järvinen
2023-11-24 8:47 ` [PATCH v2 07/10] wifi: rtlwifi: rtl8821ae: Add pdev into _rtl8821ae_clear_pci_pme_status() Ilpo Järvinen
2023-11-24 8:47 ` [PATCH v2 08/10] wifi: rtlwifi: rtl8821ae: Access full PMCS reg and use pci_regs.h Ilpo Järvinen
2023-11-24 8:47 ` [PATCH v2 09/10] wifi: rtlwifi: Remove unused PCI related defines and struct Ilpo Järvinen
2023-11-24 8:47 ` [PATCH v2 10/10] wifi: rtlwifi: Remove bridge vendor/device ids Ilpo Järvinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231124084725.12738-4-ilpo.jarvinen@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=Larry.Finger@lwfinger.net \
--cc=bhelgaas@google.com \
--cc=kvalo@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=pkshih@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®