From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: "John W. Linville" <linville@tuxdriver.com>,
Kalle Valo <kvalo@kernel.org>,
Larry Finger <Larry.Finger@lwfinger.net>,
linux-wireless@vger.kernel.org, Ping-Ke Shih <pkshih@realtek.com>,
Bjorn Helgaas <bhelgaas@google.com>,
linux-kernel@vger.kernel.org
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH v2 08/10] wifi: rtlwifi: rtl8821ae: Access full PMCS reg and use pci_regs.h
Date: Fri, 24 Nov 2023 10:47:23 +0200 [thread overview]
Message-ID: <20231124084725.12738-9-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20231124084725.12738-1-ilpo.jarvinen@linux.intel.com>
_rtl8821ae_clear_pci_pme_status() accesses the upper byte of the Power
Management Control/Status register (PMCS) with literal 5 offset.
Access the entire PMCS register using defines from pci_regs.h to
improve code readability.
While at it, remove the obvious comment and tweak debug prints
slightly to not sound misleading.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
.../wireless/realtek/rtlwifi/rtl8821ae/hw.c | 21 +++++++------------
1 file changed, 7 insertions(+), 14 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
index 7cc648d49f2d..f4b232f038a9 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
@@ -2271,7 +2271,7 @@ static void _rtl8821ae_clear_pci_pme_status(struct ieee80211_hw *hw)
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
struct pci_dev *pdev = rtlpci->pdev;
- u8 pmcs_reg;
+ u16 pmcs_reg;
u8 pm_cap;
pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
@@ -2281,23 +2281,16 @@ static void _rtl8821ae_clear_pci_pme_status(struct ieee80211_hw *hw)
return;
}
- /* Get the PM CSR (Control/Status Register),
- * The PME_Status is located at PM Capatibility offset 5, bit 7
- */
- pci_read_config_byte(pdev, pm_cap + 5, &pmcs_reg);
-
- if (pmcs_reg & BIT(7)) {
+ pci_read_config_word(pdev, pm_cap + PCI_PM_CTRL, &pmcs_reg);
+ if (pmcs_reg & PCI_PM_CTRL_PME_STATUS) {
/* Clear PME_Status with write */
- pci_write_config_byte(pdev, pm_cap + 5, pmcs_reg);
- /* Read it back to check */
- pci_read_config_byte(pdev, pm_cap + 5, &pmcs_reg);
+ pci_write_config_word(pdev, pm_cap + PCI_PM_CTRL, pmcs_reg);
+ pci_read_config_word(pdev, pm_cap + PCI_PM_CTRL, &pmcs_reg);
rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG,
- "Clear PME status 0x%2x to 0x%2x\n",
- pm_cap + 5, pmcs_reg);
+ "Cleared PME status, PMCS reg = 0x%4x\n", pmcs_reg);
} else {
rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG,
- "PME status(0x%2x) = 0x%2x\n",
- pm_cap + 5, pmcs_reg);
+ "PMCS reg = 0x%4x\n", pmcs_reg);
}
}
--
2.30.2
next prev parent reply other threads:[~2023-11-24 8:49 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-24 8:47 [PATCH v2 00/10] wifi: rtlwifi: PCI related fixes & cleanups Ilpo Järvinen
2023-11-24 8:47 ` [PATCH v2 01/10] wifi: rtlwifi: Remove bogus and dangerous ASPM disable/enable code Ilpo Järvinen
2023-12-01 12:41 ` Kalle Valo
2023-11-24 8:47 ` [PATCH v2 02/10] wifi: rtlwifi: Convert LNKCTL change to PCIe cap RMW accessors Ilpo Järvinen
2023-11-24 8:47 ` [PATCH v2 03/10] wifi: rtlwifi: Convert to use PCIe capability accessors Ilpo Järvinen
2023-11-24 8:47 ` [PATCH v2 04/10] wifi: rtlwifi: rtl8821ae: Remove unnecessary PME_Status bit set Ilpo Järvinen
2023-11-24 8:47 ` [PATCH v2 05/10] wifi: rtlwifi: rtl8821ae: Reverse PM Capability exists check Ilpo Järvinen
2023-11-24 8:47 ` [PATCH v2 06/10] wifi: rtlwifi: rtl8821ae: Use pci_find_capability() Ilpo Järvinen
2023-11-24 8:47 ` [PATCH v2 07/10] wifi: rtlwifi: rtl8821ae: Add pdev into _rtl8821ae_clear_pci_pme_status() Ilpo Järvinen
2023-11-24 8:47 ` Ilpo Järvinen [this message]
2023-11-24 8:47 ` [PATCH v2 09/10] wifi: rtlwifi: Remove unused PCI related defines and struct Ilpo Järvinen
2023-11-24 8:47 ` [PATCH v2 10/10] wifi: rtlwifi: Remove bridge vendor/device ids Ilpo Järvinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231124084725.12738-9-ilpo.jarvinen@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=Larry.Finger@lwfinger.net \
--cc=bhelgaas@google.com \
--cc=kvalo@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=pkshih@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®