From: Sean Christopherson <seanjc@google.com>
To: Sean Christopherson <seanjc@google.com>,
Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Dongli Zhang <dongli.zhang@oracle.com>
Subject: [PATCH v2 3/3] KVM: VMX: Combine "check" and "get" APIs for passthrough MSR lookups
Date: Fri, 23 Feb 2024 12:21:04 -0800 [thread overview]
Message-ID: <20240223202104.3330974-4-seanjc@google.com> (raw)
In-Reply-To: <20240223202104.3330974-1-seanjc@google.com>
Combine possible_passthrough_msr_slot() and is_valid_passthrough_msr()
into a single function, vmx_get_passthrough_msr_slot(), and have the
combined helper return the slot on success, using a negative value to
indicate "failure".
Combining the operations avoids iterating over the array of passthrough
MSRs twice for relevant MSRs.
Suggested-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
arch/x86/kvm/vmx/vmx.c | 63 +++++++++++++++++-------------------------
1 file changed, 25 insertions(+), 38 deletions(-)
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 014cf47dc66b..969fd3aa0da3 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -658,25 +658,14 @@ static inline bool cpu_need_virtualize_apic_accesses(struct kvm_vcpu *vcpu)
return flexpriority_enabled && lapic_in_kernel(vcpu);
}
-static int possible_passthrough_msr_slot(u32 msr)
+static int vmx_get_passthrough_msr_slot(u32 msr)
{
- u32 i;
-
- for (i = 0; i < ARRAY_SIZE(vmx_possible_passthrough_msrs); i++)
- if (vmx_possible_passthrough_msrs[i] == msr)
- return i;
-
- return -ENOENT;
-}
-
-static bool is_valid_passthrough_msr(u32 msr)
-{
- bool r;
+ int i;
switch (msr) {
case 0x800 ... 0x8ff:
/* x2APIC MSRs. These are handled in vmx_update_msr_bitmap_x2apic() */
- return true;
+ return -ENOENT;
case MSR_IA32_RTIT_STATUS:
case MSR_IA32_RTIT_OUTPUT_BASE:
case MSR_IA32_RTIT_OUTPUT_MASK:
@@ -691,14 +680,16 @@ static bool is_valid_passthrough_msr(u32 msr)
case MSR_LBR_CORE_FROM ... MSR_LBR_CORE_FROM + 8:
case MSR_LBR_CORE_TO ... MSR_LBR_CORE_TO + 8:
/* LBR MSRs. These are handled in vmx_update_intercept_for_lbr_msrs() */
- return true;
+ return -ENOENT;
}
- r = possible_passthrough_msr_slot(msr) != -ENOENT;
-
- WARN(!r, "Invalid MSR %x, please adapt vmx_possible_passthrough_msrs[]", msr);
+ for (i = 0; i < ARRAY_SIZE(vmx_possible_passthrough_msrs); i++) {
+ if (vmx_possible_passthrough_msrs[i] == msr)
+ return i;
+ }
- return r;
+ WARN(1, "Invalid MSR %x, please adapt vmx_possible_passthrough_msrs[]", msr);
+ return -ENOENT;
}
struct vmx_uret_msr *vmx_find_uret_msr(struct vcpu_vmx *vmx, u32 msr)
@@ -3954,6 +3945,7 @@ void vmx_disable_intercept_for_msr(struct kvm_vcpu *vcpu, u32 msr, int type)
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
unsigned long *msr_bitmap = vmx->vmcs01.msr_bitmap;
+ int idx;
if (!cpu_has_vmx_msr_bitmap())
return;
@@ -3963,16 +3955,13 @@ void vmx_disable_intercept_for_msr(struct kvm_vcpu *vcpu, u32 msr, int type)
/*
* Mark the desired intercept state in shadow bitmap, this is needed
* for resync when the MSR filters change.
- */
- if (is_valid_passthrough_msr(msr)) {
- int idx = possible_passthrough_msr_slot(msr);
-
- if (idx != -ENOENT) {
- if (type & MSR_TYPE_R)
- clear_bit(idx, vmx->shadow_msr_intercept.read);
- if (type & MSR_TYPE_W)
- clear_bit(idx, vmx->shadow_msr_intercept.write);
- }
+ */
+ idx = vmx_get_passthrough_msr_slot(msr);
+ if (idx >= 0) {
+ if (type & MSR_TYPE_R)
+ clear_bit(idx, vmx->shadow_msr_intercept.read);
+ if (type & MSR_TYPE_W)
+ clear_bit(idx, vmx->shadow_msr_intercept.write);
}
if ((type & MSR_TYPE_R) &&
@@ -3998,6 +3987,7 @@ void vmx_enable_intercept_for_msr(struct kvm_vcpu *vcpu, u32 msr, int type)
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
unsigned long *msr_bitmap = vmx->vmcs01.msr_bitmap;
+ int idx;
if (!cpu_has_vmx_msr_bitmap())
return;
@@ -4008,15 +3998,12 @@ void vmx_enable_intercept_for_msr(struct kvm_vcpu *vcpu, u32 msr, int type)
* Mark the desired intercept state in shadow bitmap, this is needed
* for resync when the MSR filter changes.
*/
- if (is_valid_passthrough_msr(msr)) {
- int idx = possible_passthrough_msr_slot(msr);
-
- if (idx != -ENOENT) {
- if (type & MSR_TYPE_R)
- set_bit(idx, vmx->shadow_msr_intercept.read);
- if (type & MSR_TYPE_W)
- set_bit(idx, vmx->shadow_msr_intercept.write);
- }
+ idx = vmx_get_passthrough_msr_slot(msr);
+ if (idx >= 0) {
+ if (type & MSR_TYPE_R)
+ set_bit(idx, vmx->shadow_msr_intercept.read);
+ if (type & MSR_TYPE_W)
+ set_bit(idx, vmx->shadow_msr_intercept.write);
}
if (type & MSR_TYPE_R)
--
2.44.0.rc0.258.g7320e95886-goog
next prev parent reply other threads:[~2024-02-23 20:21 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-23 20:21 [PATCH v2 0/3] KVM: VMX: MSR intercept/passthrough cleanup and simplification Sean Christopherson
2024-02-23 20:21 ` [PATCH v2 1/3] KVM: VMX: fix comment to add LBR to passthrough MSRs Sean Christopherson
2024-02-23 20:21 ` [PATCH v2 2/3] KVM: VMX: return early if msr_bitmap is not supported Sean Christopherson
2024-02-23 20:21 ` Sean Christopherson [this message]
2024-02-24 3:14 ` [PATCH v2 3/3] KVM: VMX: Combine "check" and "get" APIs for passthrough MSR lookups Dongli Zhang
2024-02-24 3:18 ` Dongli Zhang
2024-02-27 21:28 ` [PATCH v2 0/3] KVM: VMX: MSR intercept/passthrough cleanup and simplification Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240223202104.3330974-4-seanjc@google.com \
--to=seanjc@google.com \
--cc=dongli.zhang@oracle.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®