mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Dongli Zhang <dongli.zhang@oracle.com>
To: Sean Christopherson <seanjc@google.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Paolo Bonzini <pbonzini@redhat.com>
Subject: Re: [PATCH v2 3/3] KVM: VMX: Combine "check" and "get" APIs for passthrough MSR lookups
Date: Fri, 23 Feb 2024 19:18:43 -0800	[thread overview]
Message-ID: <b8054f76-e427-ac8e-5326-863653057f83@oracle.com> (raw)
In-Reply-To: <20240223202104.3330974-4-seanjc@google.com>



On 2/23/24 12:21, Sean Christopherson wrote:
> Combine possible_passthrough_msr_slot() and is_valid_passthrough_msr()
> into a single function, vmx_get_passthrough_msr_slot(), and have the
> combined helper return the slot on success, using a negative value to
> indicate "failure".
> 
> Combining the operations avoids iterating over the array of passthrough
> MSRs twice for relevant MSRs.
> 
> Suggested-by: Dongli Zhang <dongli.zhang@oracle.com>
> Signed-off-by: Sean Christopherson <seanjc@google.com>
> ---
>  arch/x86/kvm/vmx/vmx.c | 63 +++++++++++++++++-------------------------
>  1 file changed, 25 insertions(+), 38 deletions(-)
> 
> diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
> index 014cf47dc66b..969fd3aa0da3 100644
> --- a/arch/x86/kvm/vmx/vmx.c
> +++ b/arch/x86/kvm/vmx/vmx.c
> @@ -658,25 +658,14 @@ static inline bool cpu_need_virtualize_apic_accesses(struct kvm_vcpu *vcpu)
>  	return flexpriority_enabled && lapic_in_kernel(vcpu);
>  }
>  
> -static int possible_passthrough_msr_slot(u32 msr)
> +static int vmx_get_passthrough_msr_slot(u32 msr)
>  {
> -	u32 i;
> -
> -	for (i = 0; i < ARRAY_SIZE(vmx_possible_passthrough_msrs); i++)
> -		if (vmx_possible_passthrough_msrs[i] == msr)
> -			return i;
> -
> -	return -ENOENT;
> -}
> -
> -static bool is_valid_passthrough_msr(u32 msr)
> -{
> -	bool r;
> +	int i;
>  
>  	switch (msr) {
>  	case 0x800 ... 0x8ff:
>  		/* x2APIC MSRs. These are handled in vmx_update_msr_bitmap_x2apic() */
> -		return true;
> +		return -ENOENT;
>  	case MSR_IA32_RTIT_STATUS:
>  	case MSR_IA32_RTIT_OUTPUT_BASE:
>  	case MSR_IA32_RTIT_OUTPUT_MASK:
> @@ -691,14 +680,16 @@ static bool is_valid_passthrough_msr(u32 msr)
>  	case MSR_LBR_CORE_FROM ... MSR_LBR_CORE_FROM + 8:
>  	case MSR_LBR_CORE_TO ... MSR_LBR_CORE_TO + 8:
>  		/* LBR MSRs. These are handled in vmx_update_intercept_for_lbr_msrs() */
> -		return true;
> +		return -ENOENT;
>  	}
>  
> -	r = possible_passthrough_msr_slot(msr) != -ENOENT;
> -
> -	WARN(!r, "Invalid MSR %x, please adapt vmx_possible_passthrough_msrs[]", msr);
> +	for (i = 0; i < ARRAY_SIZE(vmx_possible_passthrough_msrs); i++) {
> +		if (vmx_possible_passthrough_msrs[i] == msr)
> +			return i;
> +	}
>  
> -	return r;
> +	WARN(1, "Invalid MSR %x, please adapt vmx_possible_passthrough_msrs[]", msr);
> +	return -ENOENT;
>  }
>  
>  struct vmx_uret_msr *vmx_find_uret_msr(struct vcpu_vmx *vmx, u32 msr)
> @@ -3954,6 +3945,7 @@ void vmx_disable_intercept_for_msr(struct kvm_vcpu *vcpu, u32 msr, int type)
>  {
>  	struct vcpu_vmx *vmx = to_vmx(vcpu);
>  	unsigned long *msr_bitmap = vmx->vmcs01.msr_bitmap;
> +	int idx;
>  
>  	if (!cpu_has_vmx_msr_bitmap())
>  		return;
> @@ -3963,16 +3955,13 @@ void vmx_disable_intercept_for_msr(struct kvm_vcpu *vcpu, u32 msr, int type)
>  	/*
>  	 * Mark the desired intercept state in shadow bitmap, this is needed
>  	 * for resync when the MSR filters change.
> -	*/
> -	if (is_valid_passthrough_msr(msr)) {
> -		int idx = possible_passthrough_msr_slot(msr);
> -
> -		if (idx != -ENOENT) {
> -			if (type & MSR_TYPE_R)
> -				clear_bit(idx, vmx->shadow_msr_intercept.read);
> -			if (type & MSR_TYPE_W)
> -				clear_bit(idx, vmx->shadow_msr_intercept.write);
> -		}
> +	 */
> +	idx = vmx_get_passthrough_msr_slot(msr);
> +	if (idx >= 0) {
> +		if (type & MSR_TYPE_R)
> +			clear_bit(idx, vmx->shadow_msr_intercept.read);
> +		if (type & MSR_TYPE_W)
> +			clear_bit(idx, vmx->shadow_msr_intercept.write);
>  	}
>  
>  	if ((type & MSR_TYPE_R) &&
> @@ -3998,6 +3987,7 @@ void vmx_enable_intercept_for_msr(struct kvm_vcpu *vcpu, u32 msr, int type)
>  {
>  	struct vcpu_vmx *vmx = to_vmx(vcpu);
>  	unsigned long *msr_bitmap = vmx->vmcs01.msr_bitmap;
> +	int idx;
>  
>  	if (!cpu_has_vmx_msr_bitmap())
>  		return;
> @@ -4008,15 +3998,12 @@ void vmx_enable_intercept_for_msr(struct kvm_vcpu *vcpu, u32 msr, int type)
>  	 * Mark the desired intercept state in shadow bitmap, this is needed
>  	 * for resync when the MSR filter changes.
>  	*/

BTW, perhaps fix above the above indentation issue too? I did not notice that
when working on the initial patch.

Thank you very much!

Dongli Zhang

  parent reply	other threads:[~2024-02-24  3:18 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-23 20:21 [PATCH v2 0/3] KVM: VMX: MSR intercept/passthrough cleanup and simplification Sean Christopherson
2024-02-23 20:21 ` [PATCH v2 1/3] KVM: VMX: fix comment to add LBR to passthrough MSRs Sean Christopherson
2024-02-23 20:21 ` [PATCH v2 2/3] KVM: VMX: return early if msr_bitmap is not supported Sean Christopherson
2024-02-23 20:21 ` [PATCH v2 3/3] KVM: VMX: Combine "check" and "get" APIs for passthrough MSR lookups Sean Christopherson
2024-02-24  3:14   ` Dongli Zhang
2024-02-24  3:18   ` Dongli Zhang [this message]
2024-02-27 21:28 ` [PATCH v2 0/3] KVM: VMX: MSR intercept/passthrough cleanup and simplification Sean Christopherson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b8054f76-e427-ac8e-5326-863653057f83@oracle.com \
    --to=dongli.zhang@oracle.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=seanjc@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®