[PATCH 5/8] regulator: mp8859: Support active discharge control

[Mark Brown <broonie@kernel.org>]

The MP8859 can actively discharge the output when disabled, add support for
controlling this feature.

Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/mp8859.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/regulator/mp8859.c b/drivers/regulator/mp8859.c
index b97c00097148..87ef34875be1 100644
--- a/drivers/regulator/mp8859.c
+++ b/drivers/regulator/mp8859.c
@@ -36,6 +36,7 @@
 #define MP8859_GO_BIT			0x01
 
 #define MP8859_ENABLE_MASK		0x80
+#define MP8859_DISCHG_EN_MASK		0x10
 #define MP8859_MODE_MASK		0x08
 
 static int mp8859_set_voltage_sel(struct regulator_dev *rdev, unsigned int sel)
@@ -167,6 +168,7 @@ static const struct regulator_ops mp8859_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 	.set_mode = mp8859_set_mode,
 	.get_mode = mp8859_get_mode,
+	.set_active_discharge = regulator_set_active_discharge_regmap,
 };
 
 static const struct regulator_desc mp8859_regulators[] = {
@@ -182,6 +184,9 @@ static const struct regulator_desc mp8859_regulators[] = {
 		.enable_reg = MP8859_CTL1_REG,
 		.enable_mask = MP8859_ENABLE_MASK,
 		.enable_val = MP8859_ENABLE_MASK,
+		.active_discharge_reg = MP8859_CTL1_REG,
+		.active_discharge_on = MP8859_DISCHG_EN_MASK,
+		.active_discharge_mask = MP8859_DISCHG_EN_MASK,
 		.ops = &mp8859_ops,
 		.owner = THIS_MODULE,
 	},

-- 
2.39.2