mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: John Garry <john.g.garry@oracle.com>
To: chandan.babu@oracle.com, djwong@kernel.org, dchinner@redhat.com,
	hch@lst.de
Cc: viro@zeniv.linux.org.uk, brauner@kernel.org, jack@suse.cz,
	linux-xfs@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-fsdevel@vger.kernel.org, catherine.hoang@oracle.com,
	martin.petersen@oracle.com, John Garry <john.g.garry@oracle.com>
Subject: [PATCH 06/13] xfs: align args->minlen for forced allocation alignment
Date: Fri, 21 Jun 2024 10:05:33 +0000	[thread overview]
Message-ID: <20240621100540.2976618-7-john.g.garry@oracle.com> (raw)
In-Reply-To: <20240621100540.2976618-1-john.g.garry@oracle.com>

From: Dave Chinner <dchinner@redhat.com>

If args->minlen is not aligned to the constraints of forced
alignment, we may do minlen allocations that are not aligned when we
approach ENOSPC. Avoid this by always aligning args->minlen
appropriately. If alignment of minlen results in a value smaller
than the alignment constraint, fail the allocation immediately.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
---
 fs/xfs/libxfs/xfs_bmap.c | 45 +++++++++++++++++++++++++++-------------
 1 file changed, 31 insertions(+), 14 deletions(-)

diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c
index 9131ba8113a6..c9cf138e13c4 100644
--- a/fs/xfs/libxfs/xfs_bmap.c
+++ b/fs/xfs/libxfs/xfs_bmap.c
@@ -3278,33 +3278,48 @@ xfs_bmap_longest_free_extent(
 	return 0;
 }
 
-static xfs_extlen_t
+static int
 xfs_bmap_select_minlen(
 	struct xfs_bmalloca	*ap,
 	struct xfs_alloc_arg	*args,
 	xfs_extlen_t		blen)
 {
-
 	/* Adjust best length for extent start alignment. */
 	if (blen > args->alignment)
 		blen -= args->alignment;
 
 	/*
 	 * Since we used XFS_ALLOC_FLAG_TRYLOCK in _longest_free_extent(), it is
-	 * possible that there is enough contiguous free space for this request.
+	 * possible that there is enough contiguous free space for this request
+	 * even if best length is less that the minimum length we need.
+	 *
+	 * If the best length won't satisfy the maximum length we requested,
+	 * then use it as the minimum length so we get as large an allocation
+	 * as possible.
 	 */
 	if (blen < ap->minlen)
-		return ap->minlen;
+		blen = ap->minlen;
+	else if (blen > args->maxlen)
+		blen = args->maxlen;
 
 	/*
-	 * If the best seen length is less than the request length,
-	 * use the best as the minimum, otherwise we've got the maxlen we
-	 * were asked for.
+	 * If we have alignment constraints, round the minlen down to match the
+	 * constraint so that alignment will be attempted. This may reduce the
+	 * allocation to smaller than was requested, so clamp the minimum to
+	 * ap->minlen to allow unaligned allocation to succeed. If we are forced
+	 * to align the allocation, return ENOSPC at this point because we don't
+	 * have enough contiguous free space to guarantee aligned allocation.
 	 */
-	if (blen < args->maxlen)
-		return blen;
-	return args->maxlen;
-
+	if (args->alignment > 1) {
+		blen = rounddown(blen, args->alignment);
+		if (blen < ap->minlen) {
+			if (args->datatype & XFS_ALLOC_FORCEALIGN)
+				return -ENOSPC;
+			blen = ap->minlen;
+		}
+	}
+	args->minlen = blen;
+	return 0;
 }
 
 static int
@@ -3340,8 +3355,7 @@ xfs_bmap_btalloc_select_lengths(
 	if (pag)
 		xfs_perag_rele(pag);
 
-	args->minlen = xfs_bmap_select_minlen(ap, args, blen);
-	return error;
+	return xfs_bmap_select_minlen(ap, args, blen);
 }
 
 /* Update all inode and quota accounting for the allocation we just did. */
@@ -3661,7 +3675,10 @@ xfs_bmap_btalloc_filestreams(
 		goto out_low_space;
 	}
 
-	args->minlen = xfs_bmap_select_minlen(ap, args, blen);
+	error = xfs_bmap_select_minlen(ap, args, blen);
+	if (error)
+		goto out_low_space;
+
 	if (ap->aeof && ap->offset)
 		error = xfs_bmap_btalloc_at_eof(ap, args);
 
-- 
2.31.1


  parent reply	other threads:[~2024-06-21 10:07 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-21 10:05 [PATCH 00/13] forcealign for xfs John Garry
2024-06-21 10:05 ` [PATCH 01/13] xfs: only allow minlen allocations when near ENOSPC John Garry
2024-06-21 19:42   ` Darrick J. Wong
2024-06-21 20:04     ` Darrick J. Wong
2024-06-21 10:05 ` [PATCH 02/13] xfs: always tail align maxlen allocations John Garry
2024-06-21 19:50   ` Darrick J. Wong
2024-06-21 10:05 ` [PATCH 03/13] xfs: simplify extent allocation alignment John Garry
2024-06-21 20:29   ` Darrick J. Wong
2024-06-21 10:05 ` [PATCH 04/13] xfs: make EOF allocation simpler John Garry
2024-06-21 20:35   ` Darrick J. Wong
2024-06-21 10:05 ` [PATCH 05/13] xfs: introduce forced allocation alignment John Garry
2024-06-21 20:37   ` Darrick J. Wong
2024-06-21 10:05 ` John Garry [this message]
2024-06-21 20:38   ` [PATCH 06/13] xfs: align args->minlen for " Darrick J. Wong
2024-06-21 10:05 ` [PATCH 07/13] xfs: Introduce FORCEALIGN inode flag John Garry
2024-06-21 19:07   ` Darrick J. Wong
2024-06-24 14:36     ` John Garry
2024-06-21 10:05 ` [PATCH 08/13] xfs: Do not free EOF blocks for forcealign John Garry
2024-06-21 19:08   ` Darrick J. Wong
2024-06-24 15:04     ` John Garry
2024-06-21 10:05 ` [PATCH 09/13] xfs: Update xfs_inode_alloc_unitsize_fsb() " John Garry
2024-06-21 18:38   ` Darrick J. Wong
2024-06-24  7:34     ` John Garry
2024-06-21 10:05 ` [PATCH 10/13] xfs: Unmap blocks according to forcealign John Garry
2024-06-21 19:12   ` Darrick J. Wong
2024-06-24 15:12     ` John Garry
2024-06-21 10:05 ` [PATCH 11/13] xfs: Only free full extents for forcealign John Garry
2024-06-21 19:13   ` Darrick J. Wong
2024-06-21 10:05 ` [PATCH 12/13] xfs: Don't revert allocated offset " John Garry
2024-06-21 19:13   ` Darrick J. Wong
2024-06-21 10:05 ` [PATCH 13/13] xfs: Enable file data forcealign feature John Garry

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240621100540.2976618-7-john.g.garry@oracle.com \
    --to=john.g.garry@oracle.com \
    --cc=brauner@kernel.org \
    --cc=catherine.hoang@oracle.com \
    --cc=chandan.babu@oracle.com \
    --cc=dchinner@redhat.com \
    --cc=djwong@kernel.org \
    --cc=hch@lst.de \
    --cc=jack@suse.cz \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-xfs@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=viro@zeniv.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®