From: Luke Parkin <luke.parkin@arm.com>
To: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, arm-scmi@vger.kernel.org
Cc: sudeep.holla@arm.com, cristian.marussi@arm.com,
Luke Parkin <luke.parkin@arm.com>
Subject: [PATCH v3 3/5] firmware: arm_scmi: Track basic SCMI statistics
Date: Mon, 15 Jul 2024 14:37:49 +0100 [thread overview]
Message-ID: <20240715133751.2877197-4-luke.parkin@arm.com> (raw)
In-Reply-To: <20240715133751.2877197-1-luke.parkin@arm.com>
Add tracking of initial statistics
Signed-off-by: Luke Parkin <luke.parkin@arm.com>
---
V2->V3
Add more statistics
Use new log_stats method.
V1->V2
Drop unneccesary atomic_set's
Use new 'scmi_log_stats' to simplify incrementing of atomics
Move scmi_log_stats to locations which mean no extra conditionals
are needed
---
drivers/firmware/arm_scmi/driver.c | 39 ++++++++++++++++++++++++++----
1 file changed, 34 insertions(+), 5 deletions(-)
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index 6edec6ec912d..b22f104cda36 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -126,6 +126,20 @@ struct scmi_debug_info {
};
enum debug_stat_counters {
+ SENT_OK,
+ SENT_FAIL,
+ SENT_FAIL_POLLING_UNSUPPORTED,
+ SENT_FAIL_CHANNEL_NOT_FOUND,
+ RESPONSE_OK,
+ NOTIF_OK,
+ DLYD_RESPONSE_OK,
+ XFERS_RESPONSE_TIMEOUT,
+ XFERS_RESPONSE_POLLED_TIMEOUT,
+ RESPONSE_POLLED_OK,
+ ERR_MSG_UNEXPECTED,
+ ERR_MSG_INVALID,
+ ERR_MSG_NOMEM,
+ ERR_PROTOCOL,
LAST
};
@@ -994,6 +1008,7 @@ scmi_xfer_command_acquire(struct scmi_chan_info *cinfo, u32 msg_hdr)
spin_unlock_irqrestore(&minfo->xfer_lock, flags);
scmi_bad_message_trace(cinfo, msg_hdr, MSG_UNEXPECTED);
+ scmi_log_stats(info->dbg_stats, ERR_MSG_UNEXPECTED);
return xfer;
}
@@ -1021,6 +1036,8 @@ scmi_xfer_command_acquire(struct scmi_chan_info *cinfo, u32 msg_hdr)
msg_type, xfer_id, msg_hdr, xfer->state);
scmi_bad_message_trace(cinfo, msg_hdr, MSG_INVALID);
+ scmi_log_stats(info->dbg_stats, ERR_MSG_INVALID);
+
/* On error the refcount incremented above has to be dropped */
__scmi_xfer_put(minfo, xfer);
@@ -1060,6 +1077,7 @@ static void scmi_handle_notification(struct scmi_chan_info *cinfo,
PTR_ERR(xfer));
scmi_bad_message_trace(cinfo, msg_hdr, MSG_NOMEM);
+ scmi_log_stats(info->dbg_stats, ERR_MSG_NOMEM);
scmi_clear_channel(info, cinfo);
return;
@@ -1075,6 +1093,7 @@ static void scmi_handle_notification(struct scmi_chan_info *cinfo,
trace_scmi_msg_dump(info->id, cinfo->id, xfer->hdr.protocol_id,
xfer->hdr.id, "NOTI", xfer->hdr.seq,
xfer->hdr.status, xfer->rx.buf, xfer->rx.len);
+ scmi_log_stats(info->dbg_stats, NOTIF_OK);
scmi_notify(cinfo->handle, xfer->hdr.protocol_id,
xfer->hdr.id, xfer->rx.buf, xfer->rx.len, ts);
@@ -1134,8 +1153,10 @@ static void scmi_handle_response(struct scmi_chan_info *cinfo,
if (xfer->hdr.type == MSG_TYPE_DELAYED_RESP) {
scmi_clear_channel(info, cinfo);
complete(xfer->async_done);
+ scmi_log_stats(info->dbg_stats, DLYD_RESPONSE_OK);
} else {
complete(&xfer->done);
+ scmi_log_stats(info->dbg_stats, RESPONSE_OK);
}
if (IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT)) {
@@ -1219,6 +1240,7 @@ static int scmi_wait_for_reply(struct device *dev, const struct scmi_desc *desc,
struct scmi_xfer *xfer, unsigned int timeout_ms)
{
int ret = 0;
+ struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
if (xfer->hdr.poll_completion) {
/*
@@ -1239,13 +1261,12 @@ static int scmi_wait_for_reply(struct device *dev, const struct scmi_desc *desc,
"timed out in resp(caller: %pS) - polling\n",
(void *)_RET_IP_);
ret = -ETIMEDOUT;
+ scmi_log_stats(info->dbg_stats, XFERS_RESPONSE_POLLED_TIMEOUT);
}
}
if (!ret) {
unsigned long flags;
- struct scmi_info *info =
- handle_to_scmi_info(cinfo->handle);
/*
* Do not fetch_response if an out-of-order delayed
@@ -1265,6 +1286,7 @@ static int scmi_wait_for_reply(struct device *dev, const struct scmi_desc *desc,
"RESP" : "resp",
xfer->hdr.seq, xfer->hdr.status,
xfer->rx.buf, xfer->rx.len);
+ scmi_log_stats(info->dbg_stats, RESPONSE_POLLED_OK);
if (IS_ENABLED(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT)) {
scmi_raw_message_report(info->raw, xfer,
@@ -1279,6 +1301,7 @@ static int scmi_wait_for_reply(struct device *dev, const struct scmi_desc *desc,
dev_err(dev, "timed out in resp(caller: %pS)\n",
(void *)_RET_IP_);
ret = -ETIMEDOUT;
+ scmi_log_stats(info->dbg_stats, XFERS_RESPONSE_TIMEOUT);
}
}
@@ -1362,13 +1385,15 @@ static int do_xfer(const struct scmi_protocol_handle *ph,
!is_transport_polling_capable(info->desc)) {
dev_warn_once(dev,
"Polling mode is not supported by transport.\n");
+ scmi_log_stats(info->dbg_stats, SENT_FAIL_POLLING_UNSUPPORTED);
return -EINVAL;
}
cinfo = idr_find(&info->tx_idr, pi->proto->id);
- if (unlikely(!cinfo))
+ if (unlikely(!cinfo)) {
+ scmi_log_stats(info->dbg_stats, SENT_FAIL_CHANNEL_NOT_FOUND);
return -EINVAL;
-
+ }
/* True ONLY if also supported by transport. */
if (is_polling_enabled(cinfo, info->desc))
xfer->hdr.poll_completion = true;
@@ -1400,16 +1425,20 @@ static int do_xfer(const struct scmi_protocol_handle *ph,
ret = info->desc->ops->send_message(cinfo, xfer);
if (ret < 0) {
dev_dbg(dev, "Failed to send message %d\n", ret);
+ scmi_log_stats(info->dbg_stats, SENT_FAIL);
return ret;
}
trace_scmi_msg_dump(info->id, cinfo->id, xfer->hdr.protocol_id,
xfer->hdr.id, "CMND", xfer->hdr.seq,
xfer->hdr.status, xfer->tx.buf, xfer->tx.len);
+ scmi_log_stats(info->dbg_stats, SENT_OK);
ret = scmi_wait_for_message_response(cinfo, xfer);
- if (!ret && xfer->hdr.status)
+ if (!ret && xfer->hdr.status) {
ret = scmi_to_linux_errno(xfer->hdr.status);
+ scmi_log_stats(info->dbg_stats, ERR_PROTOCOL);
+ }
if (info->desc->ops->mark_txdone)
info->desc->ops->mark_txdone(cinfo, ret, xfer);
--
2.34.1
next prev parent reply other threads:[~2024-07-15 13:38 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-15 13:37 [PATCH v3 0/5] Add Per-transport SCMI debug statistics Luke Parkin
2024-07-15 13:37 ` [PATCH v3 1/5] firmware: arm_scmi: Remove superfluous handle_to_scmi_info Luke Parkin
2024-07-24 13:07 ` Cristian Marussi
2024-07-15 13:37 ` [PATCH v3 2/5] firmware: arm_scmi: Add support for tracking statistics Luke Parkin
2024-07-24 13:40 ` Cristian Marussi
2024-07-15 13:37 ` Luke Parkin [this message]
2024-07-16 12:29 ` [PATCH v3 3/5] firmware: arm_scmi: Track basic SCMI statistics Peng Fan
2024-07-22 12:21 ` Luke Parkin
2024-07-24 14:24 ` Cristian Marussi
2024-07-24 14:21 ` Cristian Marussi
2024-07-24 14:39 ` Luke Parkin
2024-07-15 13:37 ` [PATCH v3 4/5] firmware: arm_scmi: Create debugfs files for statistics Luke Parkin
2024-07-24 14:26 ` Cristian Marussi
2024-07-15 13:37 ` [PATCH v3 5/5] firmware: arm_scmi: Reset statistics Luke Parkin
2024-07-24 14:41 ` Cristian Marussi
2024-07-24 14:46 ` [PATCH v3 0/5] Add Per-transport SCMI debug statistics Cristian Marussi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240715133751.2877197-4-luke.parkin@arm.com \
--to=luke.parkin@arm.com \
--cc=arm-scmi@vger.kernel.org \
--cc=cristian.marussi@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sudeep.holla@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®