[PATCH V2] arm64: dts: ti: k3-am642-evm-nand: Rename pinctrl node and gpio-hog names

[PATCH V2] arm64: dts: ti: k3-am642-evm-nand: Rename pinctrl node and gpio-hog names

[Nishanth Menon]

Rename the pin mux and gpio-hog node names to match up with binding
rules. This fixes dtbs_check warnings:
'gpmc0-pins-default' does not match any of the regexes: '-pins(-[0-9]+)?$|-pin$', 'pinctrl-[0-9]+'
'gpio0-36' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'

While at it, change the phandle name to be consistent with the pinctrl
naming.

Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---

Changes since V1:
* Picked up Reviewed-by
* Updated phandle name to match up with with standard pin naming.

V1: https://lore.kernel.org/linux-arm-kernel/20240830102709.3970209-1-nm@ti.com/

 arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso b/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso
index f08c0e272b53..92faf762894c 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso
@@ -12,7 +12,7 @@
 #include "k3-pinctrl.h"
 
 &main_pmx0 {
-	gpmc0_pins_default: gpmc0-pins-default {
+	gpmc0_default_pins: gpmc0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0094, PIN_INPUT, 7) /* (T19) GPMC0_BE1n.GPIO0_36 */
@@ -50,7 +50,7 @@ AM64X_IOPAD(0x00a4, PIN_OUTPUT, 0) /* (N17) GPMC0_DIR */
 };
 
 &main_gpio0 {
-	gpio0-36 {
+	gpmc0-hog {
 		bootph-all;
 		gpio-hog;
 		gpios = <36 0>;
@@ -67,7 +67,7 @@ &elm0 {
 &gpmc0 {
 	status = "okay";
 	pinctrl-names = "default";
-	pinctrl-0 = <&gpmc0_pins_default>;
+	pinctrl-0 = <&gpmc0_default_pins>;
 	#address-cells = <2>;
 	#size-cells = <1>;
 

base-commit: 20371ba120635d9ab7fc7670497105af8f33eb08
-- 
2.46.0

Re: [PATCH V2] arm64: dts: ti: k3-am642-evm-nand: Rename pinctrl node and gpio-hog names

[Nishanth Menon]

Hi Nishanth Menon,

On Fri, 30 Aug 2024 06:31:37 -0500, Nishanth Menon wrote:
> Rename the pin mux and gpio-hog node names to match up with binding
> rules. This fixes dtbs_check warnings:
> 'gpmc0-pins-default' does not match any of the regexes: '-pins(-[0-9]+)?$|-pin$', 'pinctrl-[0-9]+'
> 'gpio0-36' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'
> 
> While at it, change the phandle name to be consistent with the pinctrl
> naming.
> 
> [...]

I have applied the following to branch ti-k3-dts-next on [1].
Thank you!

[1/1] arm64: dts: ti: k3-am642-evm-nand: Rename pinctrl node and gpio-hog names
      commit: 47ca0776e3637e8cfbf84483a0b0c22fbdf3a9f7

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D