From: "Nícolas F. R. A. Prado" <nfraprado@collabora.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Richard Cochran <richardcochran@gmail.com>
Cc: kernel@collabora.com, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, netdev@vger.kernel.org,
"Nícolas F. R. A. Prado" <nfraprado@collabora.com>,
"Jianguo Zhang" <jianguo.zhang@mediatek.com>,
"Macpaul Lin" <macpaul.lin@mediatek.com>,
"Hsuan-Yu Lin" <shane.lin@canonical.com>
Subject: [PATCH 1/2] arm64: dts: mediatek: mt8188: Add ethernet node
Date: Tue, 15 Oct 2024 14:15:01 -0400 [thread overview]
Message-ID: <20241015-genio700-eth-v1-1-16a1c9738cf4@collabora.com> (raw)
In-Reply-To: <20241015-genio700-eth-v1-0-16a1c9738cf4@collabora.com>
Describe the ethernet present on the MT8188.
Signed-off-by: Jianguo Zhang <jianguo.zhang@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Hsuan-Yu Lin <shane.lin@canonical.com>
[Cleaned up to pass dtbs_check, follow DTS style guidelines, removed
hardcoded mac address and split between mt8188 and genio700 commits]
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
---
arch/arm64/boot/dts/mediatek/mt8188.dtsi | 95 ++++++++++++++++++++++++++++++++
1 file changed, 95 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
index b493207a1b688dba51bf5e0e469349263f54ca94..9e3981d6d5cfc8201d8caef256de1299aa8199e3 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -1647,6 +1647,101 @@ spi5: spi@11019000 {
status = "disabled";
};
+ eth: ethernet@11021000 {
+ compatible = "mediatek,mt8188-gmac", "mediatek,mt8195-gmac",
+ "snps,dwmac-5.10a";
+ reg = <0 0x11021000 0 0x4000>;
+ interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "macirq";
+ clocks = <&pericfg_ao CLK_PERI_AO_ETHERNET>,
+ <&pericfg_ao CLK_PERI_AO_ETHERNET_BUS>,
+ <&topckgen CLK_TOP_SNPS_ETH_250M>,
+ <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>,
+ <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>,
+ <&pericfg_ao CLK_PERI_AO_ETHERNET_MAC>;
+ clock-names = "axi",
+ "apb",
+ "mac_main",
+ "ptp_ref",
+ "rmii_internal",
+ "mac_cg";
+ assigned-clocks = <&topckgen CLK_TOP_SNPS_ETH_250M>,
+ <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>,
+ <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>;
+ assigned-clock-parents = <&topckgen CLK_TOP_ETHPLL_D2>,
+ <&topckgen CLK_TOP_ETHPLL_D8>,
+ <&topckgen CLK_TOP_ETHPLL_D10>;
+ power-domains = <&spm MT8188_POWER_DOMAIN_ETHER>;
+ mediatek,pericfg = <&infracfg_ao>;
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,mtl-rx-config = <&mtl_rx_setup>;
+ snps,mtl-tx-config = <&mtl_tx_setup>;
+ snps,txpbl = <16>;
+ snps,rxpbl = <16>;
+ snps,clk-csr = <0>;
+ status = "disabled";
+
+ stmmac_axi_setup: stmmac-axi-config {
+ snps,wr_osr_lmt = <0x7>;
+ snps,rd_osr_lmt = <0x7>;
+ snps,blen = <0 0 0 0 16 8 4>;
+ };
+
+ mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <4>;
+ snps,rx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ };
+ };
+
+ mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <4>;
+ snps,tx-sched-wrr;
+
+ queue0 {
+ snps,weight = <0x10>;
+ snps,dcb-algorithm;
+ snps,priority = <0x0>;
+ };
+
+ queue1 {
+ snps,weight = <0x11>;
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ };
+
+ queue2 {
+ snps,weight = <0x12>;
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ };
+
+ queue3 {
+ snps,weight = <0x13>;
+ snps,dcb-algorithm;
+ snps,priority = <0x3>;
+ };
+ };
+ };
+
xhci1: usb@11200000 {
compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci";
reg = <0 0x11200000 0 0x1000>,
--
2.47.0
next prev parent reply other threads:[~2024-10-15 18:20 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-15 18:15 [PATCH 0/2] Enable Ethernet on the Genio 700 EVK board Nícolas F. R. A. Prado
2024-10-15 18:15 ` Nícolas F. R. A. Prado [this message]
2024-10-16 10:39 ` [PATCH 1/2] arm64: dts: mediatek: mt8188: Add ethernet node AngeloGioacchino Del Regno
2024-10-15 18:15 ` [PATCH 2/2] arm64: dts: mediatek: mt8390-genio-700-evk: Enable ethernet Nícolas F. R. A. Prado
2024-10-15 23:01 ` Andrew Lunn
2024-10-16 10:41 ` AngeloGioacchino Del Regno
2024-10-16 12:39 ` Andrew Lunn
2024-10-16 15:38 ` [PATCH 0/2] Enable Ethernet on the Genio 700 EVK board Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241015-genio700-eth-v1-1-16a1c9738cf4@collabora.com \
--to=nfraprado@collabora.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jianguo.zhang@mediatek.com \
--cc=kernel@collabora.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=macpaul.lin@mediatek.com \
--cc=matthias.bgg@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=richardcochran@gmail.com \
--cc=robh@kernel.org \
--cc=shane.lin@canonical.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®