mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Nícolas F. R. A. Prado" <nfraprado@collabora.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	 Matthias Brugger <matthias.bgg@gmail.com>,
	 AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>,
	 Richard Cochran <richardcochran@gmail.com>
Cc: kernel@collabora.com, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, netdev@vger.kernel.org,
	"Nícolas F. R. A. Prado" <nfraprado@collabora.com>,
	"Jianguo Zhang" <jianguo.zhang@mediatek.com>,
	"Macpaul Lin" <macpaul.lin@mediatek.com>,
	"Hsuan-Yu Lin" <shane.lin@canonical.com>,
	"Pablo Sun" <pablo.sun@mediatek.com>,
	"fanyi zhang" <fanyi.zhang@mediatek.com>
Subject: [PATCH 2/2] arm64: dts: mediatek: mt8390-genio-700-evk: Enable ethernet
Date: Tue, 15 Oct 2024 14:15:02 -0400	[thread overview]
Message-ID: <20241015-genio700-eth-v1-2-16a1c9738cf4@collabora.com> (raw)
In-Reply-To: <20241015-genio700-eth-v1-0-16a1c9738cf4@collabora.com>

Enable ethernet on the Genio 700 EVK board. It has been tested to work
with speeds up to 1000Gbps.

Signed-off-by: Jianguo Zhang <jianguo.zhang@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Hsuan-Yu Lin <shane.lin@canonical.com>
Signed-off-by: Pablo Sun <pablo.sun@mediatek.com>
Signed-off-by: fanyi zhang <fanyi.zhang@mediatek.com>
[Cleaned up to pass dtbs_check, follow DTS style guidelines, and split
between mt8188 and genio700 commits]
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
---
 .../boot/dts/mediatek/mt8390-genio-700-evk.dts     | 25 ++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
index 0a6c9871b41e5f913740e68853aea78bc33d02aa..73e34e98726d36785e8b2cef73f532b6bb07c97f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
@@ -24,6 +24,7 @@ / {
 
 	aliases {
 		serial0 = &uart0;
+		ethernet0 = &eth;
 	};
 
 	chosen {
@@ -845,6 +846,30 @@ pins-wifi-enable {
 	};
 };
 
+&eth {
+	phy-mode ="rgmii-rxid";
+	phy-handle = <&ethernet_phy0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_default_pins>;
+	pinctrl-1 = <&eth_sleep_pins>;
+	snps,reset-gpio = <&pio 147 GPIO_ACTIVE_HIGH>;
+	snps,reset-delays-us = <0 10000 10000>;
+	mediatek,tx-delay-ps = <2030>;
+	mediatek,mac-wol;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet_phy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-id001c.c916";
+			reg = <0x1>;
+		};
+	};
+};
+
 &pmic {
 	interrupt-parent = <&pio>;
 	interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;

-- 
2.47.0


  parent reply	other threads:[~2024-10-15 18:20 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-15 18:15 [PATCH 0/2] Enable Ethernet on the Genio 700 EVK board Nícolas F. R. A. Prado
2024-10-15 18:15 ` [PATCH 1/2] arm64: dts: mediatek: mt8188: Add ethernet node Nícolas F. R. A. Prado
2024-10-16 10:39   ` AngeloGioacchino Del Regno
2024-10-15 18:15 ` Nícolas F. R. A. Prado [this message]
2024-10-15 23:01   ` [PATCH 2/2] arm64: dts: mediatek: mt8390-genio-700-evk: Enable ethernet Andrew Lunn
2024-10-16 10:41   ` AngeloGioacchino Del Regno
2024-10-16 12:39   ` Andrew Lunn
2024-10-16 15:38 ` [PATCH 0/2] Enable Ethernet on the Genio 700 EVK board Rob Herring (Arm)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241015-genio700-eth-v1-2-16a1c9738cf4@collabora.com \
    --to=nfraprado@collabora.com \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=fanyi.zhang@mediatek.com \
    --cc=jianguo.zhang@mediatek.com \
    --cc=kernel@collabora.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=macpaul.lin@mediatek.com \
    --cc=matthias.bgg@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pablo.sun@mediatek.com \
    --cc=richardcochran@gmail.com \
    --cc=robh@kernel.org \
    --cc=shane.lin@canonical.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®