mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Charlie Jenkins <charlie@rivosinc.com>
To: "Paul Walmsley" <paul.walmsley@sifive.com>,
	"Palmer Dabbelt" <palmer@dabbelt.com>,
	"Albert Ou" <aou@eecs.berkeley.edu>,
	"Clément Léger" <cleger@rivosinc.com>,
	"Evan Green" <evan@rivosinc.com>,
	"Jonathan Corbet" <corbet@lwn.net>
Cc: Palmer Dabbelt <palmer@rivosinc.com>,
	linux-riscv@lists.infradead.org,  linux-kernel@vger.kernel.org,
	linux-doc@vger.kernel.org,
	 Charlie Jenkins <charlie@rivosinc.com>,
	Jesse Taube <jesse@rivosinc.com>,
	 Conor Dooley <conor.dooley@microchip.com>
Subject: [PATCH v10 3/6] RISC-V: Replace RISCV_MISALIGNED with RISCV_SCALAR_MISALIGNED
Date: Thu, 17 Oct 2024 12:00:20 -0700	[thread overview]
Message-ID: <20241017-jesse_unaligned_vector-v10-3-5b33500160f8@rivosinc.com> (raw)
In-Reply-To: <20241017-jesse_unaligned_vector-v10-0-5b33500160f8@rivosinc.com>

From: Jesse Taube <jesse@rivosinc.com>

Replace RISCV_MISALIGNED with RISCV_SCALAR_MISALIGNED to allow
for the addition of RISCV_VECTOR_MISALIGNED in a later patch.

Signed-off-by: Jesse Taube <jesse@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
---
 arch/riscv/Kconfig                    | 6 +++---
 arch/riscv/include/asm/cpufeature.h   | 2 +-
 arch/riscv/include/asm/entry-common.h | 2 +-
 arch/riscv/kernel/Makefile            | 4 ++--
 arch/riscv/kernel/fpu.S               | 4 ++--
 5 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 939ea7f6a228..2d963d4a26d7 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -765,7 +765,7 @@ config THREAD_SIZE_ORDER
 	  Specify the Pages of thread stack size (from 4KB to 64KB), which also
 	  affects irq stack size, which is equal to thread stack size.
 
-config RISCV_MISALIGNED
+config RISCV_SCALAR_MISALIGNED
 	bool
 	select SYSCTL_ARCH_UNALIGN_ALLOW
 	help
@@ -782,7 +782,7 @@ choice
 
 config RISCV_PROBE_UNALIGNED_ACCESS
 	bool "Probe for hardware unaligned access support"
-	select RISCV_MISALIGNED
+	select RISCV_SCALAR_MISALIGNED
 	help
 	  During boot, the kernel will run a series of tests to determine the
 	  speed of unaligned accesses. This probing will dynamically determine
@@ -793,7 +793,7 @@ config RISCV_PROBE_UNALIGNED_ACCESS
 
 config RISCV_EMULATED_UNALIGNED_ACCESS
 	bool "Emulate unaligned access where system support is missing"
-	select RISCV_MISALIGNED
+	select RISCV_SCALAR_MISALIGNED
 	help
 	  If unaligned memory accesses trap into the kernel as they are not
 	  supported by the system, the kernel will emulate the unaligned
diff --git a/arch/riscv/include/asm/cpufeature.h b/arch/riscv/include/asm/cpufeature.h
index dfa5cdddd367..ccc6cf141c20 100644
--- a/arch/riscv/include/asm/cpufeature.h
+++ b/arch/riscv/include/asm/cpufeature.h
@@ -59,7 +59,7 @@ void riscv_user_isa_enable(void);
 #define __RISCV_ISA_EXT_SUPERSET_VALIDATE(_name, _id, _sub_exts, _validate) \
 	_RISCV_ISA_EXT_DATA(_name, _id, _sub_exts, ARRAY_SIZE(_sub_exts), _validate)
 
-#if defined(CONFIG_RISCV_MISALIGNED)
+#if defined(CONFIG_RISCV_SCALAR_MISALIGNED)
 bool check_unaligned_access_emulated_all_cpus(void);
 void check_unaligned_access_emulated(struct work_struct *work __always_unused);
 void unaligned_emulation_finish(void);
diff --git a/arch/riscv/include/asm/entry-common.h b/arch/riscv/include/asm/entry-common.h
index 2293e535f865..0a4e3544c877 100644
--- a/arch/riscv/include/asm/entry-common.h
+++ b/arch/riscv/include/asm/entry-common.h
@@ -25,7 +25,7 @@ static inline void arch_exit_to_user_mode_prepare(struct pt_regs *regs,
 void handle_page_fault(struct pt_regs *regs);
 void handle_break(struct pt_regs *regs);
 
-#ifdef CONFIG_RISCV_MISALIGNED
+#ifdef CONFIG_RISCV_SCALAR_MISALIGNED
 int handle_misaligned_load(struct pt_regs *regs);
 int handle_misaligned_store(struct pt_regs *regs);
 #else
diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index 7f88cc4931f5..45624c5ea86c 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -68,8 +68,8 @@ obj-y	+= probes/
 obj-y	+= tests/
 obj-$(CONFIG_MMU) += vdso.o vdso/
 
-obj-$(CONFIG_RISCV_MISALIGNED)	+= traps_misaligned.o
-obj-$(CONFIG_RISCV_MISALIGNED)	+= unaligned_access_speed.o
+obj-$(CONFIG_RISCV_SCALAR_MISALIGNED)	+= traps_misaligned.o
+obj-$(CONFIG_RISCV_SCALAR_MISALIGNED)	+= unaligned_access_speed.o
 obj-$(CONFIG_RISCV_PROBE_UNALIGNED_ACCESS)	+= copy-unaligned.o
 
 obj-$(CONFIG_FPU)		+= fpu.o
diff --git a/arch/riscv/kernel/fpu.S b/arch/riscv/kernel/fpu.S
index 327cf527dd7e..f74f6b60e347 100644
--- a/arch/riscv/kernel/fpu.S
+++ b/arch/riscv/kernel/fpu.S
@@ -170,7 +170,7 @@ SYM_FUNC_END(__fstate_restore)
 	__access_func(f31)
 
 
-#ifdef CONFIG_RISCV_MISALIGNED
+#ifdef CONFIG_RISCV_SCALAR_MISALIGNED
 
 /*
  * Disable compressed instructions set to keep a constant offset between FP
@@ -224,4 +224,4 @@ SYM_FUNC_START(get_f64_reg)
 	fp_access_epilogue
 SYM_FUNC_END(get_f64_reg)
 
-#endif /* CONFIG_RISCV_MISALIGNED */
+#endif /* CONFIG_RISCV_SCALAR_MISALIGNED */

-- 
2.45.0


  parent reply	other threads:[~2024-10-17 19:00 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-17 19:00 [PATCH v10 0/6] RISC-V: Detect and report speed of unaligned vector accesses Charlie Jenkins
2024-10-17 19:00 ` [PATCH v10 1/6] RISC-V: Check scalar unaligned access on all CPUs Charlie Jenkins
2024-10-17 19:00 ` [PATCH v10 2/6] RISC-V: Scalar unaligned access emulated on hotplug CPUs Charlie Jenkins
2024-10-17 19:00 ` Charlie Jenkins [this message]
2024-10-17 19:00 ` [PATCH v10 4/6] RISC-V: Detect unaligned vector accesses supported Charlie Jenkins
2024-10-18 23:48   ` Jesse T
2024-10-17 19:00 ` [PATCH v10 5/6] RISC-V: Report vector unaligned access speed hwprobe Charlie Jenkins
2024-10-17 19:00 ` [PATCH v10 6/6] RISC-V: hwprobe: Document unaligned vector perf key Charlie Jenkins
2024-10-24 17:50 ` [PATCH v10 0/6] RISC-V: Detect and report speed of unaligned vector accesses patchwork-bot+linux-riscv

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241017-jesse_unaligned_vector-v10-3-5b33500160f8@rivosinc.com \
    --to=charlie@rivosinc.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=cleger@rivosinc.com \
    --cc=conor.dooley@microchip.com \
    --cc=corbet@lwn.net \
    --cc=evan@rivosinc.com \
    --cc=jesse@rivosinc.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=palmer@rivosinc.com \
    --cc=paul.walmsley@sifive.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®