* [PATCH] gnss/usb: Add U-blox 8/M8 device id @ 2024-10-26 7:58 Daniel Danzberger 2024-10-29 12:03 ` Johan Hovold 0 siblings, 1 reply; 6+ messages in thread From: Daniel Danzberger @ 2024-10-26 7:58 UTC (permalink / raw) To: johan; +Cc: linux-kernel, Daniel Danzberger Adds support for U-Blox 8 GNSS devices Signed-off-by: Daniel Danzberger <dd@embedd.com> --- drivers/gnss/usb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gnss/usb.c b/drivers/gnss/usb.c index 028ce56b20ea..927f89a5b3f0 100644 --- a/drivers/gnss/usb.c +++ b/drivers/gnss/usb.c @@ -18,6 +18,7 @@ static const struct usb_device_id gnss_usb_id_table[] = { { USB_DEVICE(0x1199, 0xb000) }, /* Sierra Wireless XM1210 */ + { USB_DEVICE(0x1546, 0x01a8) }, /* U-blox 8/M8 GNSS Receiver */ { } }; MODULE_DEVICE_TABLE(usb, gnss_usb_id_table); -- 2.39.2 ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] gnss/usb: Add U-blox 8/M8 device id 2024-10-26 7:58 [PATCH] gnss/usb: Add U-blox 8/M8 device id Daniel Danzberger @ 2024-10-29 12:03 ` Johan Hovold 2024-11-23 10:38 ` Daniel Danzberger 0 siblings, 1 reply; 6+ messages in thread From: Johan Hovold @ 2024-10-29 12:03 UTC (permalink / raw) To: Daniel Danzberger; +Cc: linux-kernel On Sat, Oct 26, 2024 at 09:58:57AM +0200, Daniel Danzberger wrote: > Adds support for U-Blox 8 GNSS devices Please post the output of lsusb -v (or usb-devices) for this device. IIRC this is a USB CDC device, which is already managed by the cdc-acm driver. Johan ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] gnss/usb: Add U-blox 8/M8 device id 2024-10-29 12:03 ` Johan Hovold @ 2024-11-23 10:38 ` Daniel Danzberger 2025-01-14 16:10 ` Johan Hovold 0 siblings, 1 reply; 6+ messages in thread From: Daniel Danzberger @ 2024-11-23 10:38 UTC (permalink / raw) To: Johan Hovold; +Cc: linux-kernel Hi Johan, this is the lsusb -v output: -- root@test1:~# lsusb -v -s 001:002 Bus 001 Device 002: ID 1546:01a8 u-blox AG - www.u-blox.com u-blox GNSS receiver Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 2 [unknown] bDeviceSubClass 0 [unknown] bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1546 u-blox AG - www.u-blox.com idProduct 0x01a8 u-blox GNSS receiver bcdDevice 3.01 iManufacturer 1 u-blox AG - www.u-blox.com iProduct 2 u-blox GNSS receiver iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x003e bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 [unknown] bInterfaceSubClass 2 [unknown] bInterfaceProtocol 1 iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 255 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 [unknown] bInterfaceSubClass 0 [unknown] bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0001 Self Powered -- This is a cat on the device, so you can see it's in fact usb gnss capable: -- root@test1:~# cat /dev/gnss0 $GNTXT,01,01,02,u-blox AG - www.u-blox.com*4E $GNTXT,01,01,02,HW UBX-M8030 00080000*60 $GNTXT,01,01,02,ROM CORE 3.01 (107888)*2B $GNTXT,01,01,02,FWVER=SPG 3.01*46 $GNTXT,01,01,02,PROTVER=18.00*11 $GNTXT,01,01,02,GPS;GLO;GAL;BDS*77 $GNTXT,01,01,02,SBAS;IMES;QZSS*49 $GNTXT,01,01,02,GNSS OTP=GPS;GLO*37 $GNTXT,01,01,02,LLC=FFFFFFFF-FFFFFFE3-FFFFFFFF-FFFFFFFF-FFFFFFE9*27 $GNTXT,01,01,02,ANTSUPERV=AC SD PDoS SR*3E $GNTXT,01,01,02,ANTSTATUS=OK*25 $GNTXT,01,01,02,PF=3DF*49 $GNRMC,,V,,,,,,,,,,N*4D $GNVTG,,,,,,,,,N*2E $GNGGA,,,,,,0,00,99.99,,,,,,*56 $GNGSA,A,1,,,,,,,,,,,,,99.99,99.99,99.99*2E -- On Tue, 2024-10-29 at 13:03 +0100, Johan Hovold wrote: > On Sat, Oct 26, 2024 at 09:58:57AM +0200, Daniel Danzberger wrote: > > Adds support for U-Blox 8 GNSS devices > > Please post the output of lsusb -v (or usb-devices) for this device. > > IIRC this is a USB CDC device, which is already managed by the cdc-acm > driver. > > Johan > -- Regards Daniel Danzberger embeDD GmbH, Alter Postplatz 2, CH-6370 Stans ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] gnss/usb: Add U-blox 8/M8 device id 2024-11-23 10:38 ` Daniel Danzberger @ 2025-01-14 16:10 ` Johan Hovold 0 siblings, 0 replies; 6+ messages in thread From: Johan Hovold @ 2025-01-14 16:10 UTC (permalink / raw) To: Daniel Danzberger; +Cc: linux-kernel Hi Daniel, and sorry about the late follow up on this. On Sat, Nov 23, 2024 at 11:38:42AM +0100, Daniel Danzberger wrote: > this is the lsusb -v output: > -- > root@test1:~# lsusb -v -s 001:002 > > Bus 001 Device 002: ID 1546:01a8 u-blox AG - www.u-blox.com u-blox GNSS receiver > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 1.10 > bDeviceClass 2 [unknown] > bDeviceSubClass 0 [unknown] > bDeviceProtocol 0 Not sure why your lsusb says unknown here, but this is a CDC-ACM device: bDeviceClass 2 Communications > bMaxPacketSize0 64 > idVendor 0x1546 u-blox AG - www.u-blox.com > idProduct 0x01a8 u-blox GNSS receiver > bcdDevice 3.01 > iManufacturer 1 u-blox AG - www.u-blox.com > iProduct 2 u-blox GNSS receiver > iSerial 0 > bNumConfigurations 1 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 2 [unknown] > bInterfaceSubClass 2 [unknown] > bInterfaceProtocol 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) > iInterface 0 > CDC Header: > bcdCDC 1.10 > CDC ACM: > bmCapabilities 0x02 > line coding and serial state > CDC Call Management: > bmCapabilities 0x03 > call management > use DataInterface > bDataInterface 1 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x83 EP 3 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0040 1x 64 bytes > bInterval 255 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 1 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 10 [unknown] > bInterfaceSubClass 0 [unknown] > bInterfaceProtocol 255 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 255 Vendor specific > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x01 EP 1 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0040 1x 64 bytes > bInterval 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x82 EP 2 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0040 1x 64 bytes > bInterval 0 > Device Status: 0x0001 > Self Powered These device are currently handled by the cdc-acm driver and there is currently no point in moving them to a different driver (and potentially breaking people's setups). I have one of these here myself, and the fact that we already have a driver for them was the reason for me not adding it to the GNSS USB driver already (I even think I used this device when writing the driver). > On Tue, 2024-10-29 at 13:03 +0100, Johan Hovold wrote: > > On Sat, Oct 26, 2024 at 09:58:57AM +0200, Daniel Danzberger wrote: > > > Adds support for U-Blox 8 GNSS devices > > > > Please post the output of lsusb -v (or usb-devices) for this device. > > > > IIRC this is a USB CDC device, which is already managed by the cdc-acm > > driver. Johan ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] gnss/usb: Add U-blox 8/M8 device id @ 2023-09-07 6:44 Daniel Danzberger 2023-10-16 12:30 ` Johan Hovold 0 siblings, 1 reply; 6+ messages in thread From: Daniel Danzberger @ 2023-09-07 6:44 UTC (permalink / raw) To: johan; +Cc: linux-kernel, Daniel Danzberger Adds support for U-Blox 8 GNSS devices Signed-off-by: Daniel Danzberger <dd@embedd.com> --- drivers/gnss/usb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gnss/usb.c b/drivers/gnss/usb.c index 028ce56b20ea..927f89a5b3f0 100644 --- a/drivers/gnss/usb.c +++ b/drivers/gnss/usb.c @@ -18,6 +18,7 @@ static const struct usb_device_id gnss_usb_id_table[] = { { USB_DEVICE(0x1199, 0xb000) }, /* Sierra Wireless XM1210 */ + { USB_DEVICE(0x1546, 0x01a8) }, /* U-blox 8/M8 GNSS Receiver */ { } }; MODULE_DEVICE_TABLE(usb, gnss_usb_id_table); -- 2.39.2 ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] gnss/usb: Add U-blox 8/M8 device id 2023-09-07 6:44 Daniel Danzberger @ 2023-10-16 12:30 ` Johan Hovold 0 siblings, 0 replies; 6+ messages in thread From: Johan Hovold @ 2023-10-16 12:30 UTC (permalink / raw) To: Daniel Danzberger; +Cc: linux-kernel On Thu, Sep 07, 2023 at 08:44:13AM +0200, Daniel Danzberger wrote: > Adds support for U-Blox 8 GNSS devices I have u-blox 8 device with the same PID here as well and that one identifies itself as a CDC device and is managed by the cdc-acm driver currently. Can you please post the output of lsusb -v for your device? > + { USB_DEVICE(0x1546, 0x01a8) }, /* U-blox 8/M8 GNSS Receiver */ Johan ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2025-01-14 16:10 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2024-10-26 7:58 [PATCH] gnss/usb: Add U-blox 8/M8 device id Daniel Danzberger 2024-10-29 12:03 ` Johan Hovold 2024-11-23 10:38 ` Daniel Danzberger 2025-01-14 16:10 ` Johan Hovold -- strict thread matches above, loose matches on Subject: below -- 2023-09-07 6:44 Daniel Danzberger 2023-10-16 12:30 ` Johan Hovold
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®