[PATCH AUTOSEL 6.11 01/33] pinctrl: freescale: fix COMPILE_TEST error with PINCTRL_IMX_SCU

[PATCH AUTOSEL 6.11 01/33] pinctrl: freescale: fix COMPILE_TEST error with PINCTRL_IMX_SCU

[Sasha Levin]

From: Esben Haabendal <esben@geanix.com>

[ Upstream commit 58414a31c5713afb5449fd74a26a843d34cc62e8 ]

When PINCTRL_IMX_SCU was selected by PINCTRL_IMX8DXL or PINCTRL_IMX8QM
combined with COMPILE_TEST on a non-arm platforms, the IMX_SCU
dependency could not be enabled.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410031439.GyTSa0kX-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202410030852.q0Hukplf-lkp@intel.com/
Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/20241003-imx-pinctrl-compile-test-fix-v1-1-145ca1948cc3@geanix.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/freescale/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig
index 3b59d71890045..139bc0fb8a9db 100644
--- a/drivers/pinctrl/freescale/Kconfig
+++ b/drivers/pinctrl/freescale/Kconfig
@@ -20,7 +20,7 @@ config PINCTRL_IMX_SCMI
 
 config PINCTRL_IMX_SCU
 	tristate
-	depends on IMX_SCU
+	depends on IMX_SCU || COMPILE_TEST
 	select PINCTRL_IMX
 
 config PINCTRL_IMX1_CORE
-- 
2.43.0

[PATCH AUTOSEL 6.11 02/33] rtla: Fix consistency in getopt_long for timerlat_hist

[Sasha Levin]

From: Gabriele Monaco <gmonaco@redhat.com>

[ Upstream commit cfb1ea216c1656a4112becbc4bf757891933b902 ]

Commit e9a4062e1527 ("rtla: Add --trace-buffer-size option") adds a new
long option to rtla utilities, but among all affected files,
timerlat_hist misses a trailing `:` in the corresponding short option
inside the getopt string (e.g. `\3:`). This patch propagates the `:`.

Although this change is not functionally required, it improves
consistency and slightly reduces the likelihood a future change would
introduce a problem.

Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/20240926143417.54039-1-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/tracing/rtla/src/timerlat_hist.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/tracing/rtla/src/timerlat_hist.c b/tools/tracing/rtla/src/timerlat_hist.c
index a3907c390d67a..1f9137c592f45 100644
--- a/tools/tracing/rtla/src/timerlat_hist.c
+++ b/tools/tracing/rtla/src/timerlat_hist.c
@@ -778,7 +778,7 @@ static struct timerlat_hist_params
 		/* getopt_long stores the option index here. */
 		int option_index = 0;
 
-		c = getopt_long(argc, argv, "a:c:C::b:d:e:E:DhH:i:knp:P:s:t::T:uU0123456:7:8:9\1\2:\3",
+		c = getopt_long(argc, argv, "a:c:C::b:d:e:E:DhH:i:knp:P:s:t::T:uU0123456:7:8:9\1\2:\3:",
 				 long_options, &option_index);
 
 		/* detect the end of the options. */
-- 
2.43.0

[PATCH AUTOSEL 6.11 03/33] tracing/ftrace: disable preemption in syscall probe

[Sasha Levin]

From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

[ Upstream commit 13d750c2c03e9861e15268574ed2c239cca9c9d5 ]

In preparation for allowing system call enter/exit instrumentation to
handle page faults, make sure that ftrace can handle this change by
explicitly disabling preemption within the ftrace system call tracepoint
probes to respect the current expectations within ftrace ring buffer
code.

This change does not yet allow ftrace to take page faults per se within
its probe, but allows its existing probes to adapt to the upcoming
change.

Cc: Michael Jeanson <mjeanson@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: bpf@vger.kernel.org
Cc: Joel Fernandes <joel@joelfernandes.org>
Link: https://lore.kernel.org/20241009010718.2050182-3-mathieu.desnoyers@efficios.com
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/trace/trace_events.h  | 36 +++++++++++++++++++++++++++++++----
 kernel/trace/trace_syscalls.c | 12 ++++++++++++
 2 files changed, 44 insertions(+), 4 deletions(-)

diff --git a/include/trace/trace_events.h b/include/trace/trace_events.h
index c2f9cabf154d1..fa0d51cad57a8 100644
--- a/include/trace/trace_events.h
+++ b/include/trace/trace_events.h
@@ -244,6 +244,9 @@ static struct trace_event_fields trace_event_fields_##call[] = {	\
 	tstruct								\
 	{} };
 
+#undef DECLARE_EVENT_SYSCALL_CLASS
+#define DECLARE_EVENT_SYSCALL_CLASS DECLARE_EVENT_CLASS
+
 #undef DEFINE_EVENT_PRINT
 #define DEFINE_EVENT_PRINT(template, name, proto, args, print)
 
@@ -374,11 +377,11 @@ static inline notrace int trace_event_get_offsets_##call(		\
 
 #include "stages/stage6_event_callback.h"
 
-#undef DECLARE_EVENT_CLASS
-#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print)	\
-									\
+
+#undef __DECLARE_EVENT_CLASS
+#define __DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print) \
 static notrace void							\
-trace_event_raw_event_##call(void *__data, proto)			\
+do_trace_event_raw_event_##call(void *__data, proto)			\
 {									\
 	struct trace_event_file *trace_file = __data;			\
 	struct trace_event_data_offsets_##call __maybe_unused __data_offsets;\
@@ -403,6 +406,29 @@ trace_event_raw_event_##call(void *__data, proto)			\
 									\
 	trace_event_buffer_commit(&fbuffer);				\
 }
+
+#undef DECLARE_EVENT_CLASS
+#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print)	\
+__DECLARE_EVENT_CLASS(call, PARAMS(proto), PARAMS(args), PARAMS(tstruct), \
+		      PARAMS(assign), PARAMS(print))			\
+static notrace void							\
+trace_event_raw_event_##call(void *__data, proto)			\
+{									\
+	do_trace_event_raw_event_##call(__data, args);			\
+}
+
+#undef DECLARE_EVENT_SYSCALL_CLASS
+#define DECLARE_EVENT_SYSCALL_CLASS(call, proto, args, tstruct, assign, print) \
+__DECLARE_EVENT_CLASS(call, PARAMS(proto), PARAMS(args), PARAMS(tstruct), \
+		      PARAMS(assign), PARAMS(print))			\
+static notrace void							\
+trace_event_raw_event_##call(void *__data, proto)			\
+{									\
+	preempt_disable_notrace();					\
+	do_trace_event_raw_event_##call(__data, args);			\
+	preempt_enable_notrace();					\
+}
+
 /*
  * The ftrace_test_probe is compiled out, it is only here as a build time check
  * to make sure that if the tracepoint handling changes, the ftrace probe will
@@ -418,6 +444,8 @@ static inline void ftrace_test_probe_##call(void)			\
 
 #include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
 
+#undef __DECLARE_EVENT_CLASS
+
 #include "stages/stage7_class_define.h"
 
 #undef DECLARE_EVENT_CLASS
diff --git a/kernel/trace/trace_syscalls.c b/kernel/trace/trace_syscalls.c
index 9c581d6da843a..f76efcb6336aa 100644
--- a/kernel/trace/trace_syscalls.c
+++ b/kernel/trace/trace_syscalls.c
@@ -299,6 +299,12 @@ static void ftrace_syscall_enter(void *data, struct pt_regs *regs, long id)
 	int syscall_nr;
 	int size;
 
+	/*
+	 * Syscall probe called with preemption enabled, but the ring
+	 * buffer and per-cpu data require preemption to be disabled.
+	 */
+	guard(preempt_notrace)();
+
 	syscall_nr = trace_get_syscall_nr(current, regs);
 	if (syscall_nr < 0 || syscall_nr >= NR_syscalls)
 		return;
@@ -338,6 +344,12 @@ static void ftrace_syscall_exit(void *data, struct pt_regs *regs, long ret)
 	struct trace_event_buffer fbuffer;
 	int syscall_nr;
 
+	/*
+	 * Syscall probe called with preemption enabled, but the ring
+	 * buffer and per-cpu data require preemption to be disabled.
+	 */
+	guard(preempt_notrace)();
+
 	syscall_nr = trace_get_syscall_nr(current, regs);
 	if (syscall_nr < 0 || syscall_nr >= NR_syscalls)
 		return;
-- 
2.43.0

[PATCH AUTOSEL 6.11 04/33] tracing: Use atomic64_inc_return() in trace_clock_counter()

[Sasha Levin]

From: Uros Bizjak <ubizjak@gmail.com>

[ Upstream commit eb887c4567d1b0e7684c026fe7df44afa96589e6 ]

Use atomic64_inc_return(&ref) instead of atomic64_add_return(1, &ref)
to use optimized implementation and ease register pressure around
the primitive for targets that implement optimized variant.

Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241007085651.48544-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace_clock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/trace/trace_clock.c b/kernel/trace/trace_clock.c
index 4702efb00ff21..4cb2ebc439be6 100644
--- a/kernel/trace/trace_clock.c
+++ b/kernel/trace/trace_clock.c
@@ -154,5 +154,5 @@ static atomic64_t trace_counter;
  */
 u64 notrace trace_clock_counter(void)
 {
-	return atomic64_add_return(1, &trace_counter);
+	return atomic64_inc_return(&trace_counter);
 }
-- 
2.43.0

[PATCH AUTOSEL 6.11 05/33] tools/rtla: fix collision with glibc sched_attr/sched_set_attr

[Sasha Levin]

From: Jan Stancek <jstancek@redhat.com>

[ Upstream commit 0eecee340672c4b512f6f4a8c6add26df05d130c ]

glibc commit 21571ca0d703 ("Linux: Add the sched_setattr
and sched_getattr functions") now also provides 'struct sched_attr'
and sched_setattr() which collide with the ones from rtla.

  In file included from src/trace.c:11:
  src/utils.h:49:8: error: redefinition of ‘struct sched_attr’
     49 | struct sched_attr {
        |        ^~~~~~~~~~
  In file included from /usr/include/bits/sched.h:60,
                   from /usr/include/sched.h:43,
                   from /usr/include/tracefs/tracefs.h:10,
                   from src/trace.c:4:
  /usr/include/linux/sched/types.h:98:8: note: originally defined here
     98 | struct sched_attr {
        |        ^~~~~~~~~~

Define 'struct sched_attr' conditionally, similar to what strace did:
  https://lore.kernel.org/all/20240930222913.3981407-1-raj.khem@gmail.com/
and rename rtla's version of sched_setattr() to avoid collision.

Link: https://lore.kernel.org/8088f66a7a57c1b209cd8ae0ae7c336a7f8c930d.1728572865.git.jstancek@redhat.com
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/tracing/rtla/src/utils.c | 4 ++--
 tools/tracing/rtla/src/utils.h | 2 ++
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/tools/tracing/rtla/src/utils.c b/tools/tracing/rtla/src/utils.c
index 9ac71a66840c1..0735fcb827ed7 100644
--- a/tools/tracing/rtla/src/utils.c
+++ b/tools/tracing/rtla/src/utils.c
@@ -233,7 +233,7 @@ long parse_ns_duration(char *val)
 
 #define SCHED_DEADLINE		6
 
-static inline int sched_setattr(pid_t pid, const struct sched_attr *attr,
+static inline int syscall_sched_setattr(pid_t pid, const struct sched_attr *attr,
 				unsigned int flags) {
 	return syscall(__NR_sched_setattr, pid, attr, flags);
 }
@@ -243,7 +243,7 @@ int __set_sched_attr(int pid, struct sched_attr *attr)
 	int flags = 0;
 	int retval;
 
-	retval = sched_setattr(pid, attr, flags);
+	retval = syscall_sched_setattr(pid, attr, flags);
 	if (retval < 0) {
 		err_msg("Failed to set sched attributes to the pid %d: %s\n",
 			pid, strerror(errno));
diff --git a/tools/tracing/rtla/src/utils.h b/tools/tracing/rtla/src/utils.h
index d44513e6c66a0..99c9cf81bcd02 100644
--- a/tools/tracing/rtla/src/utils.h
+++ b/tools/tracing/rtla/src/utils.h
@@ -46,6 +46,7 @@ update_sum(unsigned long long *a, unsigned long long *b)
 	*a += *b;
 }
 
+#ifndef SCHED_ATTR_SIZE_VER0
 struct sched_attr {
 	uint32_t size;
 	uint32_t sched_policy;
@@ -56,6 +57,7 @@ struct sched_attr {
 	uint64_t sched_deadline;
 	uint64_t sched_period;
 };
+#endif /* SCHED_ATTR_SIZE_VER0 */
 
 int parse_prio(char *arg, struct sched_attr *sched_param);
 int parse_cpu_set(char *cpu_list, cpu_set_t *set);
-- 
2.43.0

[PATCH AUTOSEL 6.11 06/33] rtla/timerlat: Make timerlat_top_cpu->*_count unsigned long long

[Sasha Levin]

From: Tomas Glozar <tglozar@redhat.com>

[ Upstream commit 4eba4723c5254ba8251ecb7094a5078d5c300646 ]

Most fields of struct timerlat_top_cpu are unsigned long long, but the
fields {irq,thread,user}_count are int (32-bit signed).

This leads to overflow when tracing on a large number of CPUs for a long
enough time:
$ rtla timerlat top -a20 -c 1-127 -d 12h
...
  0 12:00:00   |          IRQ Timer Latency (us)        |         Thread Timer Latency (us)
CPU COUNT      |      cur       min       avg       max |      cur       min       avg       max
 1 #43200096  |        0         0         1         2 |        3         2         6        12
...
127 #43200096  |        0         0         1         2 |        3         2         5        11
ALL #119144 e4 |                  0         5         4 |                  2        28        16

The average latency should be 0-1 for IRQ and 5-6 for thread, but is
reported as 5 and 28, about 4 to 5 times more, due to the count
overflowing when summed over all CPUs: 43200096 * 127 = 5486412192,
however, 1191444898 (= 5486412192 mod MAX_INT) is reported instead, as
seen on the last line of the output, and the averages are thus ~4.6
times higher than they should be (5486412192 / 1191444898 = ~4.6).

Fix the issue by changing {irq,thread,user}_count fields to unsigned
long long, similarly to other fields in struct timerlat_top_cpu and to
the count variable in timerlat_top_print_sum.

Link: https://lore.kernel.org/20241011121015.2868751-1-tglozar@redhat.com
Reported-by: Attila Fazekas <afazekas@redhat.com>
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/tracing/rtla/src/timerlat_top.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/tools/tracing/rtla/src/timerlat_top.c b/tools/tracing/rtla/src/timerlat_top.c
index 210b0f533534a..ee7c291fc9bb3 100644
--- a/tools/tracing/rtla/src/timerlat_top.c
+++ b/tools/tracing/rtla/src/timerlat_top.c
@@ -54,9 +54,9 @@ struct timerlat_top_params {
 };
 
 struct timerlat_top_cpu {
-	int			irq_count;
-	int			thread_count;
-	int			user_count;
+	unsigned long long	irq_count;
+	unsigned long long	thread_count;
+	unsigned long long	user_count;
 
 	unsigned long long	cur_irq;
 	unsigned long long	min_irq;
@@ -280,7 +280,7 @@ static void timerlat_top_print(struct osnoise_tool *top, int cpu)
 	/*
 	 * Unless trace is being lost, IRQ counter is always the max.
 	 */
-	trace_seq_printf(s, "%3d #%-9d |", cpu, cpu_data->irq_count);
+	trace_seq_printf(s, "%3d #%-9llu |", cpu, cpu_data->irq_count);
 
 	if (!cpu_data->irq_count) {
 		trace_seq_printf(s, "%s %s %s %s |", no_value, no_value, no_value, no_value);
-- 
2.43.0

[PATCH AUTOSEL 6.11 07/33] rtla/timerlat: Make timerlat_hist_cpu->*_count unsigned long long

[Sasha Levin]

From: Tomas Glozar <tglozar@redhat.com>

[ Upstream commit 76b3102148135945b013797fac9b206273f0f777 ]

Do the same fix as in previous commit also for timerlat-hist.

Link: https://lore.kernel.org/20241011121015.2868751-2-tglozar@redhat.com
Reported-by: Attila Fazekas <afazekas@redhat.com>
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/tracing/rtla/src/timerlat_hist.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/tools/tracing/rtla/src/timerlat_hist.c b/tools/tracing/rtla/src/timerlat_hist.c
index 1f9137c592f45..d49c8f0855fe0 100644
--- a/tools/tracing/rtla/src/timerlat_hist.c
+++ b/tools/tracing/rtla/src/timerlat_hist.c
@@ -62,9 +62,9 @@ struct timerlat_hist_cpu {
 	int			*thread;
 	int			*user;
 
-	int			irq_count;
-	int			thread_count;
-	int			user_count;
+	unsigned long long	irq_count;
+	unsigned long long	thread_count;
+	unsigned long long	user_count;
 
 	unsigned long long	min_irq;
 	unsigned long long	sum_irq;
@@ -304,15 +304,15 @@ timerlat_print_summary(struct timerlat_hist_params *params,
 			continue;
 
 		if (!params->no_irq)
-			trace_seq_printf(trace->seq, "%9d ",
+			trace_seq_printf(trace->seq, "%9llu ",
 					data->hist[cpu].irq_count);
 
 		if (!params->no_thread)
-			trace_seq_printf(trace->seq, "%9d ",
+			trace_seq_printf(trace->seq, "%9llu ",
 					data->hist[cpu].thread_count);
 
 		if (params->user_hist)
-			trace_seq_printf(trace->seq, "%9d ",
+			trace_seq_printf(trace->seq, "%9llu ",
 					 data->hist[cpu].user_count);
 	}
 	trace_seq_printf(trace->seq, "\n");
@@ -488,15 +488,15 @@ timerlat_print_stats_all(struct timerlat_hist_params *params,
 		trace_seq_printf(trace->seq, "count:");
 
 	if (!params->no_irq)
-		trace_seq_printf(trace->seq, "%9d ",
+		trace_seq_printf(trace->seq, "%9llu ",
 				 sum.irq_count);
 
 	if (!params->no_thread)
-		trace_seq_printf(trace->seq, "%9d ",
+		trace_seq_printf(trace->seq, "%9llu ",
 				 sum.thread_count);
 
 	if (params->user_hist)
-		trace_seq_printf(trace->seq, "%9d ",
+		trace_seq_printf(trace->seq, "%9llu ",
 				 sum.user_count);
 
 	trace_seq_printf(trace->seq, "\n");
-- 
2.43.0

[PATCH AUTOSEL 6.11 08/33] scsi: hisi_sas: Add cond_resched() for no forced preemption model

[Sasha Levin]

From: Yihang Li <liyihang9@huawei.com>

[ Upstream commit 2233c4a0b948211743659b24c13d6bd059fa75fc ]

For no forced preemption model kernel, in the scenario where the
expander is connected to 12 high performance SAS SSDs, the following
call trace may occur:

[  214.409199][  C240] watchdog: BUG: soft lockup - CPU#240 stuck for 22s! [irq/149-hisi_sa:3211]
[  214.568533][  C240] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[  214.575224][  C240] pc : fput_many+0x8c/0xdc
[  214.579480][  C240] lr : fput+0x1c/0xf0
[  214.583302][  C240] sp : ffff80002de2b900
[  214.587298][  C240] x29: ffff80002de2b900 x28: ffff1082aa412000
[  214.593291][  C240] x27: ffff3062a0348c08 x26: ffff80003a9f6000
[  214.599284][  C240] x25: ffff1062bbac5c40 x24: 0000000000001000
[  214.605277][  C240] x23: 000000000000000a x22: 0000000000000001
[  214.611270][  C240] x21: 0000000000001000 x20: 0000000000000000
[  214.617262][  C240] x19: ffff3062a41ae580 x18: 0000000000010000
[  214.623255][  C240] x17: 0000000000000001 x16: ffffdb3a6efe5fc0
[  214.629248][  C240] x15: ffffffffffffffff x14: 0000000003ffffff
[  214.635241][  C240] x13: 000000000000ffff x12: 000000000000029c
[  214.641234][  C240] x11: 0000000000000006 x10: ffff80003a9f7fd0
[  214.647226][  C240] x9 : ffffdb3a6f0482fc x8 : 0000000000000001
[  214.653219][  C240] x7 : 0000000000000002 x6 : 0000000000000080
[  214.659212][  C240] x5 : ffff55480ee9b000 x4 : fffffde7f94c6554
[  214.665205][  C240] x3 : 0000000000000002 x2 : 0000000000000020
[  214.671198][  C240] x1 : 0000000000000021 x0 : ffff3062a41ae5b8
[  214.677191][  C240] Call trace:
[  214.680320][  C240]  fput_many+0x8c/0xdc
[  214.684230][  C240]  fput+0x1c/0xf0
[  214.687707][  C240]  aio_complete_rw+0xd8/0x1fc
[  214.692225][  C240]  blkdev_bio_end_io+0x98/0x140
[  214.696917][  C240]  bio_endio+0x160/0x1bc
[  214.701001][  C240]  blk_update_request+0x1c8/0x3bc
[  214.705867][  C240]  scsi_end_request+0x3c/0x1f0
[  214.710471][  C240]  scsi_io_completion+0x7c/0x1a0
[  214.715249][  C240]  scsi_finish_command+0x104/0x140
[  214.720200][  C240]  scsi_softirq_done+0x90/0x180
[  214.724892][  C240]  blk_mq_complete_request+0x5c/0x70
[  214.730016][  C240]  scsi_mq_done+0x48/0xac
[  214.734194][  C240]  sas_scsi_task_done+0xbc/0x16c [libsas]
[  214.739758][  C240]  slot_complete_v3_hw+0x260/0x760 [hisi_sas_v3_hw]
[  214.746185][  C240]  cq_thread_v3_hw+0xbc/0x190 [hisi_sas_v3_hw]
[  214.752179][  C240]  irq_thread_fn+0x34/0xa4
[  214.756435][  C240]  irq_thread+0xc4/0x130
[  214.760520][  C240]  kthread+0x108/0x13c
[  214.764430][  C240]  ret_from_fork+0x10/0x18

This is because in the hisi_sas driver, both the hardware interrupt
handler and the interrupt thread are executed on the same CPU. In the
performance test scenario, function irq_wait_for_interrupt() will always
return 0 if lots of interrupts occurs and the CPU will be continuously
consumed. As a result, the CPU cannot run the watchdog thread. When the
watchdog time exceeds the specified time, call trace occurs.

To fix it, add cond_resched() to execute the watchdog thread.

Signed-off-by: Yihang Li <liyihang9@huawei.com>
Link: https://lore.kernel.org/r/20241008021822.2617339-8-liyihang9@huawei.com
Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index feda9b54b4434..5bf4b61eed51d 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -2493,6 +2493,7 @@ static int complete_v3_hw(struct hisi_sas_cq *cq)
 	/* update rd_point */
 	cq->rd_point = rd_point;
 	hisi_sas_write32(hisi_hba, COMPL_Q_0_RD_PTR + (0x14 * queue), rd_point);
+	cond_resched();
 
 	return completed;
 }
-- 
2.43.0

[PATCH AUTOSEL 6.11 09/33] scsi: hisi_sas: Create all dump files during debugfs initialization

[Sasha Levin]

From: Yihang Li <liyihang9@huawei.com>

[ Upstream commit 9f564f15f88490b484e02442dc4c4b11640ea172 ]

For the current debugfs of hisi_sas, after user triggers dump, the
driver allocate memory space to save the register information and create
debugfs files to display the saved information. In this process, the
debugfs files created after each dump.

Therefore, when the dump is triggered while the driver is unbind, the
following hang occurs:

[67840.853907] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0
[67840.862947] Mem abort info:
[67840.865855]   ESR = 0x0000000096000004
[67840.869713]   EC = 0x25: DABT (current EL), IL = 32 bits
[67840.875125]   SET = 0, FnV = 0
[67840.878291]   EA = 0, S1PTW = 0
[67840.881545]   FSC = 0x04: level 0 translation fault
[67840.886528] Data abort info:
[67840.889524]   ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[67840.895117]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[67840.900284]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[67840.905709] user pgtable: 4k pages, 48-bit VAs, pgdp=0000002803a1f000
[67840.912263] [00000000000000a0] pgd=0000000000000000, p4d=0000000000000000
[67840.919177] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[67840.996435] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[67841.003628] pc : down_write+0x30/0x98
[67841.007546] lr : start_creating.part.0+0x60/0x198
[67841.012495] sp : ffff8000b979ba20
[67841.016046] x29: ffff8000b979ba20 x28: 0000000000000010 x27: 0000000000024b40
[67841.023412] x26: 0000000000000012 x25: ffff20202b355ae8 x24: ffff20202b35a8c8
[67841.030779] x23: ffffa36877928208 x22: ffffa368b4972240 x21: ffff8000b979bb18
[67841.038147] x20: ffff00281dc1e3c0 x19: fffffffffffffffe x18: 0000000000000020
[67841.045515] x17: 0000000000000000 x16: ffffa368b128a530 x15: ffffffffffffffff
[67841.052888] x14: ffff8000b979bc18 x13: ffffffffffffffff x12: ffff8000b979bb18
[67841.060263] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa368b1289b18
[67841.067640] x8 : 0000000000000012 x7 : 0000000000000000 x6 : 00000000000003a9
[67841.075014] x5 : 0000000000000000 x4 : ffff002818c5cb00 x3 : 0000000000000001
[67841.082388] x2 : 0000000000000000 x1 : ffff002818c5cb00 x0 : 00000000000000a0
[67841.089759] Call trace:
[67841.092456]  down_write+0x30/0x98
[67841.096017]  start_creating.part.0+0x60/0x198
[67841.100613]  debugfs_create_dir+0x48/0x1f8
[67841.104950]  debugfs_create_files_v3_hw+0x88/0x348 [hisi_sas_v3_hw]
[67841.111447]  debugfs_snapshot_regs_v3_hw+0x708/0x798 [hisi_sas_v3_hw]
[67841.118111]  debugfs_trigger_dump_v3_hw_write+0x9c/0x120 [hisi_sas_v3_hw]
[67841.125115]  full_proxy_write+0x68/0xc8
[67841.129175]  vfs_write+0xd8/0x3f0
[67841.132708]  ksys_write+0x70/0x108
[67841.136317]  __arm64_sys_write+0x24/0x38
[67841.140440]  invoke_syscall+0x50/0x128
[67841.144385]  el0_svc_common.constprop.0+0xc8/0xf0
[67841.149273]  do_el0_svc+0x24/0x38
[67841.152773]  el0_svc+0x38/0xd8
[67841.156009]  el0t_64_sync_handler+0xc0/0xc8
[67841.160361]  el0t_64_sync+0x1a4/0x1a8
[67841.164189] Code: b9000882 d2800002 d2800023 f9800011 (c85ffc05)
[67841.170443] ---[ end trace 0000000000000000 ]---

To fix this issue, create all directories and files during debugfs
initialization. In this way, the driver only needs to allocate memory
space to save information each time the user triggers dumping.

Signed-off-by: Yihang Li <liyihang9@huawei.com>
Link: https://lore.kernel.org/r/20241008021822.2617339-13-liyihang9@huawei.com
Reviewed-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 99 ++++++++++++++++++++------
 1 file changed, 77 insertions(+), 22 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 5bf4b61eed51d..bdcabad21f697 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -3551,6 +3551,11 @@ debugfs_to_reg_name_v3_hw(int off, int base_off,
 	return NULL;
 }
 
+static bool debugfs_dump_is_generated_v3_hw(void *p)
+{
+	return p ? true : false;
+}
+
 static void debugfs_print_reg_v3_hw(u32 *regs_val, struct seq_file *s,
 				    const struct hisi_sas_debugfs_reg *reg)
 {
@@ -3576,6 +3581,9 @@ static int debugfs_global_v3_hw_show(struct seq_file *s, void *p)
 {
 	struct hisi_sas_debugfs_regs *global = s->private;
 
+	if (!debugfs_dump_is_generated_v3_hw(global->data))
+		return -EPERM;
+
 	debugfs_print_reg_v3_hw(global->data, s,
 				&debugfs_global_reg);
 
@@ -3587,6 +3595,9 @@ static int debugfs_axi_v3_hw_show(struct seq_file *s, void *p)
 {
 	struct hisi_sas_debugfs_regs *axi = s->private;
 
+	if (!debugfs_dump_is_generated_v3_hw(axi->data))
+		return -EPERM;
+
 	debugfs_print_reg_v3_hw(axi->data, s,
 				&debugfs_axi_reg);
 
@@ -3598,6 +3609,9 @@ static int debugfs_ras_v3_hw_show(struct seq_file *s, void *p)
 {
 	struct hisi_sas_debugfs_regs *ras = s->private;
 
+	if (!debugfs_dump_is_generated_v3_hw(ras->data))
+		return -EPERM;
+
 	debugfs_print_reg_v3_hw(ras->data, s,
 				&debugfs_ras_reg);
 
@@ -3610,6 +3624,9 @@ static int debugfs_port_v3_hw_show(struct seq_file *s, void *p)
 	struct hisi_sas_debugfs_port *port = s->private;
 	const struct hisi_sas_debugfs_reg *reg_port = &debugfs_port_reg;
 
+	if (!debugfs_dump_is_generated_v3_hw(port->data))
+		return -EPERM;
+
 	debugfs_print_reg_v3_hw(port->data, s, reg_port);
 
 	return 0;
@@ -3665,6 +3682,9 @@ static int debugfs_cq_v3_hw_show(struct seq_file *s, void *p)
 	struct hisi_sas_debugfs_cq *debugfs_cq = s->private;
 	int slot;
 
+	if (!debugfs_dump_is_generated_v3_hw(debugfs_cq->complete_hdr))
+		return -EPERM;
+
 	for (slot = 0; slot < HISI_SAS_QUEUE_SLOTS; slot++)
 		debugfs_cq_show_slot_v3_hw(s, slot, debugfs_cq);
 
@@ -3686,8 +3706,12 @@ static void debugfs_dq_show_slot_v3_hw(struct seq_file *s, int slot,
 
 static int debugfs_dq_v3_hw_show(struct seq_file *s, void *p)
 {
+	struct hisi_sas_debugfs_dq *debugfs_dq = s->private;
 	int slot;
 
+	if (!debugfs_dump_is_generated_v3_hw(debugfs_dq->hdr))
+		return -EPERM;
+
 	for (slot = 0; slot < HISI_SAS_QUEUE_SLOTS; slot++)
 		debugfs_dq_show_slot_v3_hw(s, slot, s->private);
 
@@ -3701,6 +3725,9 @@ static int debugfs_iost_v3_hw_show(struct seq_file *s, void *p)
 	struct hisi_sas_iost *iost = debugfs_iost->iost;
 	int i, max_command_entries = HISI_SAS_MAX_COMMANDS;
 
+	if (!debugfs_dump_is_generated_v3_hw(iost))
+		return -EPERM;
+
 	for (i = 0; i < max_command_entries; i++, iost++) {
 		__le64 *data = &iost->qw0;
 
@@ -3720,6 +3747,9 @@ static int debugfs_iost_cache_v3_hw_show(struct seq_file *s, void *p)
 	int i, tab_idx;
 	__le64 *iost;
 
+	if (!debugfs_dump_is_generated_v3_hw(iost_cache))
+		return -EPERM;
+
 	for (i = 0; i < HISI_SAS_IOST_ITCT_CACHE_NUM; i++, iost_cache++) {
 		/*
 		 * Data struct of IOST cache:
@@ -3743,6 +3773,9 @@ static int debugfs_itct_v3_hw_show(struct seq_file *s, void *p)
 	struct hisi_sas_debugfs_itct *debugfs_itct = s->private;
 	struct hisi_sas_itct *itct = debugfs_itct->itct;
 
+	if (!debugfs_dump_is_generated_v3_hw(itct))
+		return -EPERM;
+
 	for (i = 0; i < HISI_SAS_MAX_ITCT_ENTRIES; i++, itct++) {
 		__le64 *data = &itct->qw0;
 
@@ -3762,6 +3795,9 @@ static int debugfs_itct_cache_v3_hw_show(struct seq_file *s, void *p)
 	int i, tab_idx;
 	__le64 *itct;
 
+	if (!debugfs_dump_is_generated_v3_hw(itct_cache))
+		return -EPERM;
+
 	for (i = 0; i < HISI_SAS_IOST_ITCT_CACHE_NUM; i++, itct_cache++) {
 		/*
 		 * Data struct of ITCT cache:
@@ -3779,10 +3815,9 @@ static int debugfs_itct_cache_v3_hw_show(struct seq_file *s, void *p)
 }
 DEFINE_SHOW_ATTRIBUTE(debugfs_itct_cache_v3_hw);
 
-static void debugfs_create_files_v3_hw(struct hisi_hba *hisi_hba)
+static void debugfs_create_files_v3_hw(struct hisi_hba *hisi_hba, int index)
 {
 	u64 *debugfs_timestamp;
-	int dump_index = hisi_hba->debugfs_dump_index;
 	struct dentry *dump_dentry;
 	struct dentry *dentry;
 	char name[256];
@@ -3790,17 +3825,17 @@ static void debugfs_create_files_v3_hw(struct hisi_hba *hisi_hba)
 	int c;
 	int d;
 
-	snprintf(name, 256, "%d", dump_index);
+	snprintf(name, 256, "%d", index);
 
 	dump_dentry = debugfs_create_dir(name, hisi_hba->debugfs_dump_dentry);
 
-	debugfs_timestamp = &hisi_hba->debugfs_timestamp[dump_index];
+	debugfs_timestamp = &hisi_hba->debugfs_timestamp[index];
 
 	debugfs_create_u64("timestamp", 0400, dump_dentry,
 			   debugfs_timestamp);
 
 	debugfs_create_file("global", 0400, dump_dentry,
-			    &hisi_hba->debugfs_regs[dump_index][DEBUGFS_GLOBAL],
+			    &hisi_hba->debugfs_regs[index][DEBUGFS_GLOBAL],
 			    &debugfs_global_v3_hw_fops);
 
 	/* Create port dir and files */
@@ -3809,7 +3844,7 @@ static void debugfs_create_files_v3_hw(struct hisi_hba *hisi_hba)
 		snprintf(name, 256, "%d", p);
 
 		debugfs_create_file(name, 0400, dentry,
-				    &hisi_hba->debugfs_port_reg[dump_index][p],
+				    &hisi_hba->debugfs_port_reg[index][p],
 				    &debugfs_port_v3_hw_fops);
 	}
 
@@ -3819,7 +3854,7 @@ static void debugfs_create_files_v3_hw(struct hisi_hba *hisi_hba)
 		snprintf(name, 256, "%d", c);
 
 		debugfs_create_file(name, 0400, dentry,
-				    &hisi_hba->debugfs_cq[dump_index][c],
+				    &hisi_hba->debugfs_cq[index][c],
 				    &debugfs_cq_v3_hw_fops);
 	}
 
@@ -3829,32 +3864,32 @@ static void debugfs_create_files_v3_hw(struct hisi_hba *hisi_hba)
 		snprintf(name, 256, "%d", d);
 
 		debugfs_create_file(name, 0400, dentry,
-				    &hisi_hba->debugfs_dq[dump_index][d],
+				    &hisi_hba->debugfs_dq[index][d],
 				    &debugfs_dq_v3_hw_fops);
 	}
 
 	debugfs_create_file("iost", 0400, dump_dentry,
-			    &hisi_hba->debugfs_iost[dump_index],
+			    &hisi_hba->debugfs_iost[index],
 			    &debugfs_iost_v3_hw_fops);
 
 	debugfs_create_file("iost_cache", 0400, dump_dentry,
-			    &hisi_hba->debugfs_iost_cache[dump_index],
+			    &hisi_hba->debugfs_iost_cache[index],
 			    &debugfs_iost_cache_v3_hw_fops);
 
 	debugfs_create_file("itct", 0400, dump_dentry,
-			    &hisi_hba->debugfs_itct[dump_index],
+			    &hisi_hba->debugfs_itct[index],
 			    &debugfs_itct_v3_hw_fops);
 
 	debugfs_create_file("itct_cache", 0400, dump_dentry,
-			    &hisi_hba->debugfs_itct_cache[dump_index],
+			    &hisi_hba->debugfs_itct_cache[index],
 			    &debugfs_itct_cache_v3_hw_fops);
 
 	debugfs_create_file("axi", 0400, dump_dentry,
-			    &hisi_hba->debugfs_regs[dump_index][DEBUGFS_AXI],
+			    &hisi_hba->debugfs_regs[index][DEBUGFS_AXI],
 			    &debugfs_axi_v3_hw_fops);
 
 	debugfs_create_file("ras", 0400, dump_dentry,
-			    &hisi_hba->debugfs_regs[dump_index][DEBUGFS_RAS],
+			    &hisi_hba->debugfs_regs[index][DEBUGFS_RAS],
 			    &debugfs_ras_v3_hw_fops);
 }
 
@@ -4517,22 +4552,34 @@ static void debugfs_release_v3_hw(struct hisi_hba *hisi_hba, int dump_index)
 	int i;
 
 	devm_kfree(dev, hisi_hba->debugfs_iost_cache[dump_index].cache);
+	hisi_hba->debugfs_iost_cache[dump_index].cache = NULL;
 	devm_kfree(dev, hisi_hba->debugfs_itct_cache[dump_index].cache);
+	hisi_hba->debugfs_itct_cache[dump_index].cache = NULL;
 	devm_kfree(dev, hisi_hba->debugfs_iost[dump_index].iost);
+	hisi_hba->debugfs_iost[dump_index].iost = NULL;
 	devm_kfree(dev, hisi_hba->debugfs_itct[dump_index].itct);
+	hisi_hba->debugfs_itct[dump_index].itct = NULL;
 
-	for (i = 0; i < hisi_hba->queue_count; i++)
+	for (i = 0; i < hisi_hba->queue_count; i++) {
 		devm_kfree(dev, hisi_hba->debugfs_dq[dump_index][i].hdr);
+		hisi_hba->debugfs_dq[dump_index][i].hdr = NULL;
+	}
 
-	for (i = 0; i < hisi_hba->queue_count; i++)
+	for (i = 0; i < hisi_hba->queue_count; i++) {
 		devm_kfree(dev,
 			   hisi_hba->debugfs_cq[dump_index][i].complete_hdr);
+		hisi_hba->debugfs_cq[dump_index][i].complete_hdr = NULL;
+	}
 
-	for (i = 0; i < DEBUGFS_REGS_NUM; i++)
+	for (i = 0; i < DEBUGFS_REGS_NUM; i++) {
 		devm_kfree(dev, hisi_hba->debugfs_regs[dump_index][i].data);
+		hisi_hba->debugfs_regs[dump_index][i].data = NULL;
+	}
 
-	for (i = 0; i < hisi_hba->n_phy; i++)
+	for (i = 0; i < hisi_hba->n_phy; i++) {
 		devm_kfree(dev, hisi_hba->debugfs_port_reg[dump_index][i].data);
+		hisi_hba->debugfs_port_reg[dump_index][i].data = NULL;
+	}
 }
 
 static const struct hisi_sas_debugfs_reg *debugfs_reg_array_v3_hw[DEBUGFS_REGS_NUM] = {
@@ -4659,8 +4706,6 @@ static int debugfs_snapshot_regs_v3_hw(struct hisi_hba *hisi_hba)
 	debugfs_snapshot_itct_reg_v3_hw(hisi_hba);
 	debugfs_snapshot_iost_reg_v3_hw(hisi_hba);
 
-	debugfs_create_files_v3_hw(hisi_hba);
-
 	debugfs_snapshot_restore_v3_hw(hisi_hba);
 	hisi_hba->debugfs_dump_index++;
 
@@ -4744,6 +4789,17 @@ static void debugfs_bist_init_v3_hw(struct hisi_hba *hisi_hba)
 	hisi_hba->debugfs_bist_linkrate = SAS_LINK_RATE_1_5_GBPS;
 }
 
+static void debugfs_dump_init_v3_hw(struct hisi_hba *hisi_hba)
+{
+	int i;
+
+	hisi_hba->debugfs_dump_dentry =
+			debugfs_create_dir("dump", hisi_hba->debugfs_dir);
+
+	for (i = 0; i < hisi_sas_debugfs_dump_count; i++)
+		debugfs_create_files_v3_hw(hisi_hba, i);
+}
+
 static void debugfs_exit_v3_hw(struct hisi_hba *hisi_hba)
 {
 	debugfs_remove_recursive(hisi_hba->debugfs_dir);
@@ -4764,8 +4820,7 @@ static void debugfs_init_v3_hw(struct hisi_hba *hisi_hba)
 	/* create bist structures */
 	debugfs_bist_init_v3_hw(hisi_hba);
 
-	hisi_hba->debugfs_dump_dentry =
-			debugfs_create_dir("dump", hisi_hba->debugfs_dir);
+	debugfs_dump_init_v3_hw(hisi_hba);
 
 	debugfs_phy_down_cnt_init_v3_hw(hisi_hba);
 	debugfs_fifo_init_v3_hw(hisi_hba);
-- 
2.43.0

[PATCH AUTOSEL 6.11 10/33] rtla/utils: Add idle state disabling via libcpupower

[Sasha Levin]

From: Tomas Glozar <tglozar@redhat.com>

[ Upstream commit 083d29d3784319e9e9fab3ac02683a7b26ae3480 ]

Add functions to utils.c to disable idle states through functions of
libcpupower. This will serve as the basis for disabling idle states
per cpu when running timerlat.

Link: https://lore.kernel.org/20241017140914.3200454-4-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/tracing/rtla/src/utils.c | 150 +++++++++++++++++++++++++++++++++
 tools/tracing/rtla/src/utils.h |  13 +++
 2 files changed, 163 insertions(+)

diff --git a/tools/tracing/rtla/src/utils.c b/tools/tracing/rtla/src/utils.c
index 0735fcb827ed7..230f9fc7502dd 100644
--- a/tools/tracing/rtla/src/utils.c
+++ b/tools/tracing/rtla/src/utils.c
@@ -4,6 +4,9 @@
  */
 
 #define _GNU_SOURCE
+#ifdef HAVE_LIBCPUPOWER_SUPPORT
+#include <cpuidle.h>
+#endif /* HAVE_LIBCPUPOWER_SUPPORT */
 #include <dirent.h>
 #include <stdarg.h>
 #include <stdlib.h>
@@ -519,6 +522,153 @@ int set_cpu_dma_latency(int32_t latency)
 	return fd;
 }
 
+#ifdef HAVE_LIBCPUPOWER_SUPPORT
+static unsigned int **saved_cpu_idle_disable_state;
+static size_t saved_cpu_idle_disable_state_alloc_ctr;
+
+/*
+ * save_cpu_idle_state_disable - save disable for all idle states of a cpu
+ *
+ * Saves the current disable of all idle states of a cpu, to be subsequently
+ * restored via restore_cpu_idle_disable_state.
+ *
+ * Return: idle state count on success, negative on error
+ */
+int save_cpu_idle_disable_state(unsigned int cpu)
+{
+	unsigned int nr_states;
+	unsigned int state;
+	int disabled;
+	int nr_cpus;
+
+	nr_states = cpuidle_state_count(cpu);
+
+	if (nr_states == 0)
+		return 0;
+
+	if (saved_cpu_idle_disable_state == NULL) {
+		nr_cpus = sysconf(_SC_NPROCESSORS_CONF);
+		saved_cpu_idle_disable_state = calloc(nr_cpus, sizeof(unsigned int *));
+		if (!saved_cpu_idle_disable_state)
+			return -1;
+	}
+
+	saved_cpu_idle_disable_state[cpu] = calloc(nr_states, sizeof(unsigned int));
+	if (!saved_cpu_idle_disable_state[cpu])
+		return -1;
+	saved_cpu_idle_disable_state_alloc_ctr++;
+
+	for (state = 0; state < nr_states; state++) {
+		disabled = cpuidle_is_state_disabled(cpu, state);
+		if (disabled < 0)
+			return disabled;
+		saved_cpu_idle_disable_state[cpu][state] = disabled;
+	}
+
+	return nr_states;
+}
+
+/*
+ * restore_cpu_idle_disable_state - restore disable for all idle states of a cpu
+ *
+ * Restores the current disable state of all idle states of a cpu that was
+ * previously saved by save_cpu_idle_disable_state.
+ *
+ * Return: idle state count on success, negative on error
+ */
+int restore_cpu_idle_disable_state(unsigned int cpu)
+{
+	unsigned int nr_states;
+	unsigned int state;
+	int disabled;
+	int result;
+
+	nr_states = cpuidle_state_count(cpu);
+
+	if (nr_states == 0)
+		return 0;
+
+	if (!saved_cpu_idle_disable_state)
+		return -1;
+
+	for (state = 0; state < nr_states; state++) {
+		if (!saved_cpu_idle_disable_state[cpu])
+			return -1;
+		disabled = saved_cpu_idle_disable_state[cpu][state];
+		result = cpuidle_state_disable(cpu, state, disabled);
+		if (result < 0)
+			return result;
+	}
+
+	free(saved_cpu_idle_disable_state[cpu]);
+	saved_cpu_idle_disable_state[cpu] = NULL;
+	saved_cpu_idle_disable_state_alloc_ctr--;
+	if (saved_cpu_idle_disable_state_alloc_ctr == 0) {
+		free(saved_cpu_idle_disable_state);
+		saved_cpu_idle_disable_state = NULL;
+	}
+
+	return nr_states;
+}
+
+/*
+ * free_cpu_idle_disable_states - free saved idle state disable for all cpus
+ *
+ * Frees the memory used for storing cpu idle state disable for all cpus
+ * and states.
+ *
+ * Normally, the memory is freed automatically in
+ * restore_cpu_idle_disable_state; this is mostly for cleaning up after an
+ * error.
+ */
+void free_cpu_idle_disable_states(void)
+{
+	int cpu;
+	int nr_cpus;
+
+	if (!saved_cpu_idle_disable_state)
+		return;
+
+	nr_cpus = sysconf(_SC_NPROCESSORS_CONF);
+
+	for (cpu = 0; cpu < nr_cpus; cpu++) {
+		free(saved_cpu_idle_disable_state[cpu]);
+		saved_cpu_idle_disable_state[cpu] = NULL;
+	}
+
+	free(saved_cpu_idle_disable_state);
+	saved_cpu_idle_disable_state = NULL;
+}
+
+/*
+ * set_deepest_cpu_idle_state - limit idle state of cpu
+ *
+ * Disables all idle states deeper than the one given in
+ * deepest_state (assuming states with higher number are deeper).
+ *
+ * This is used to reduce the exit from idle latency. Unlike
+ * set_cpu_dma_latency, it can disable idle states per cpu.
+ *
+ * Return: idle state count on success, negative on error
+ */
+int set_deepest_cpu_idle_state(unsigned int cpu, unsigned int deepest_state)
+{
+	unsigned int nr_states;
+	unsigned int state;
+	int result;
+
+	nr_states = cpuidle_state_count(cpu);
+
+	for (state = deepest_state + 1; state < nr_states; state++) {
+		result = cpuidle_state_disable(cpu, state, 1);
+		if (result < 0)
+			return result;
+	}
+
+	return nr_states;
+}
+#endif /* HAVE_LIBCPUPOWER_SUPPORT */
+
 #define _STR(x) #x
 #define STR(x) _STR(x)
 
diff --git a/tools/tracing/rtla/src/utils.h b/tools/tracing/rtla/src/utils.h
index 99c9cf81bcd02..101d4799a0090 100644
--- a/tools/tracing/rtla/src/utils.h
+++ b/tools/tracing/rtla/src/utils.h
@@ -66,6 +66,19 @@ int set_comm_sched_attr(const char *comm_prefix, struct sched_attr *attr);
 int set_comm_cgroup(const char *comm_prefix, const char *cgroup);
 int set_pid_cgroup(pid_t pid, const char *cgroup);
 int set_cpu_dma_latency(int32_t latency);
+#ifdef HAVE_LIBCPUPOWER_SUPPORT
+int save_cpu_idle_disable_state(unsigned int cpu);
+int restore_cpu_idle_disable_state(unsigned int cpu);
+void free_cpu_idle_disable_states(void);
+int set_deepest_cpu_idle_state(unsigned int cpu, unsigned int state);
+static inline int have_libcpupower_support(void) { return 1; }
+#else
+static inline int save_cpu_idle_disable_state(unsigned int cpu) { return -1; }
+static inline int restore_cpu_idle_disable_state(unsigned int cpu) { return -1; }
+static inline void free_cpu_idle_disable_states(void) { }
+static inline int set_deepest_cpu_idle_state(unsigned int cpu, unsigned int state) { return -1; }
+static inline int have_libcpupower_support(void) { return 0; }
+#endif /* HAVE_LIBCPUPOWER_SUPPORT */
 int auto_house_keeping(cpu_set_t *monitored_cpus);
 
 #define ns_to_usf(x) (((double)x/1000))
-- 
2.43.0

[PATCH AUTOSEL 6.11 11/33] ring-buffer: Limit time with disabled interrupts in rb_check_pages()

[Sasha Levin]

From: Petr Pavlu <petr.pavlu@suse.com>

[ Upstream commit b237e1f7d2273fdcffac20100b72c002bdd770dd ]

The function rb_check_pages() validates the integrity of a specified
per-CPU tracing ring buffer. It does so by traversing the underlying
linked list and checking its next and prev links.

To guarantee that the list isn't modified during the check, a caller
typically needs to take cpu_buffer->reader_lock. This prevents the check
from running concurrently, for example, with a potential reader which
can make the list temporarily inconsistent when swapping its old reader
page into the buffer.

A problem with this approach is that the time when interrupts are
disabled is non-deterministic, dependent on the ring buffer size. This
particularly affects PREEMPT_RT because the reader_lock is a raw
spinlock which doesn't become sleepable on PREEMPT_RT kernels.

Modify the check so it still attempts to traverse the entire list, but
gives up the reader_lock between checking individual pages. Introduce
for this purpose a new variable ring_buffer_per_cpu.cnt which is bumped
any time the list is modified. The value is used by rb_check_pages() to
detect such a change and restart the check.

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241015112810.27203-1-petr.pavlu@suse.com
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/ring_buffer.c | 98 ++++++++++++++++++++++++++++----------
 1 file changed, 72 insertions(+), 26 deletions(-)

diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index fb7b092e79313..f282c1335edc9 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -462,6 +462,8 @@ struct ring_buffer_per_cpu {
 	unsigned long			nr_pages;
 	unsigned int			current_context;
 	struct list_head		*pages;
+	/* pages generation counter, incremented when the list changes */
+	unsigned long			cnt;
 	struct buffer_page		*head_page;	/* read from head */
 	struct buffer_page		*tail_page;	/* write to tail */
 	struct buffer_page		*commit_page;	/* committed pages */
@@ -1442,40 +1444,87 @@ static void rb_check_bpage(struct ring_buffer_per_cpu *cpu_buffer,
 	RB_WARN_ON(cpu_buffer, val & RB_FLAG_MASK);
 }
 
+static bool rb_check_links(struct ring_buffer_per_cpu *cpu_buffer,
+			   struct list_head *list)
+{
+	if (RB_WARN_ON(cpu_buffer,
+		       rb_list_head(rb_list_head(list->next)->prev) != list))
+		return false;
+
+	if (RB_WARN_ON(cpu_buffer,
+		       rb_list_head(rb_list_head(list->prev)->next) != list))
+		return false;
+
+	return true;
+}
+
 /**
  * rb_check_pages - integrity check of buffer pages
  * @cpu_buffer: CPU buffer with pages to test
  *
  * As a safety measure we check to make sure the data pages have not
  * been corrupted.
- *
- * Callers of this function need to guarantee that the list of pages doesn't get
- * modified during the check. In particular, if it's possible that the function
- * is invoked with concurrent readers which can swap in a new reader page then
- * the caller should take cpu_buffer->reader_lock.
  */
 static void rb_check_pages(struct ring_buffer_per_cpu *cpu_buffer)
 {
-	struct list_head *head = rb_list_head(cpu_buffer->pages);
-	struct list_head *tmp;
+	struct list_head *head, *tmp;
+	unsigned long buffer_cnt;
+	unsigned long flags;
+	int nr_loops = 0;
 
-	if (RB_WARN_ON(cpu_buffer,
-			rb_list_head(rb_list_head(head->next)->prev) != head))
+	/*
+	 * Walk the linked list underpinning the ring buffer and validate all
+	 * its next and prev links.
+	 *
+	 * The check acquires the reader_lock to avoid concurrent processing
+	 * with code that could be modifying the list. However, the lock cannot
+	 * be held for the entire duration of the walk, as this would make the
+	 * time when interrupts are disabled non-deterministic, dependent on the
+	 * ring buffer size. Therefore, the code releases and re-acquires the
+	 * lock after checking each page. The ring_buffer_per_cpu.cnt variable
+	 * is then used to detect if the list was modified while the lock was
+	 * not held, in which case the check needs to be restarted.
+	 *
+	 * The code attempts to perform the check at most three times before
+	 * giving up. This is acceptable because this is only a self-validation
+	 * to detect problems early on. In practice, the list modification
+	 * operations are fairly spaced, and so this check typically succeeds at
+	 * most on the second try.
+	 */
+again:
+	if (++nr_loops > 3)
 		return;
 
-	if (RB_WARN_ON(cpu_buffer,
-			rb_list_head(rb_list_head(head->prev)->next) != head))
-		return;
+	raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
+	head = rb_list_head(cpu_buffer->pages);
+	if (!rb_check_links(cpu_buffer, head))
+		goto out_locked;
+	buffer_cnt = cpu_buffer->cnt;
+	tmp = head;
+	raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
 
-	for (tmp = rb_list_head(head->next); tmp != head; tmp = rb_list_head(tmp->next)) {
-		if (RB_WARN_ON(cpu_buffer,
-				rb_list_head(rb_list_head(tmp->next)->prev) != tmp))
-			return;
+	while (true) {
+		raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
 
-		if (RB_WARN_ON(cpu_buffer,
-				rb_list_head(rb_list_head(tmp->prev)->next) != tmp))
-			return;
+		if (buffer_cnt != cpu_buffer->cnt) {
+			/* The list was updated, try again. */
+			raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
+			goto again;
+		}
+
+		tmp = rb_list_head(tmp->next);
+		if (tmp == head)
+			/* The iteration circled back, all is done. */
+			goto out_locked;
+
+		if (!rb_check_links(cpu_buffer, tmp))
+			goto out_locked;
+
+		raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
 	}
+
+out_locked:
+	raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
 }
 
 static int __rb_allocate_pages(struct ring_buffer_per_cpu *cpu_buffer,
@@ -1862,6 +1911,7 @@ rb_remove_pages(struct ring_buffer_per_cpu *cpu_buffer, unsigned long nr_pages)
 
 	/* make sure pages points to a valid page in the ring buffer */
 	cpu_buffer->pages = next_page;
+	cpu_buffer->cnt++;
 
 	/* update head page */
 	if (head_bit)
@@ -1968,6 +2018,7 @@ rb_insert_pages(struct ring_buffer_per_cpu *cpu_buffer)
 			 * pointer to point to end of list
 			 */
 			head_page->prev = last_page;
+			cpu_buffer->cnt++;
 			success = true;
 			break;
 		}
@@ -2203,12 +2254,8 @@ int ring_buffer_resize(struct trace_buffer *buffer, unsigned long size,
 		 */
 		synchronize_rcu();
 		for_each_buffer_cpu(buffer, cpu) {
-			unsigned long flags;
-
 			cpu_buffer = buffer->buffers[cpu];
-			raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
 			rb_check_pages(cpu_buffer);
-			raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
 		}
 		atomic_dec(&buffer->record_disabled);
 	}
@@ -4599,6 +4646,7 @@ rb_get_reader_page(struct ring_buffer_per_cpu *cpu_buffer)
 	rb_list_head(reader->list.next)->prev = &cpu_buffer->reader_page->list;
 	rb_inc_page(&cpu_buffer->head_page);
 
+	cpu_buffer->cnt++;
 	local_inc(&cpu_buffer->pages_read);
 
 	/* Finally update the reader page to the new head */
@@ -5138,12 +5186,9 @@ void
 ring_buffer_read_finish(struct ring_buffer_iter *iter)
 {
 	struct ring_buffer_per_cpu *cpu_buffer = iter->cpu_buffer;
-	unsigned long flags;
 
 	/* Use this opportunity to check the integrity of the ring buffer. */
-	raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
 	rb_check_pages(cpu_buffer);
-	raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
 
 	atomic_dec(&cpu_buffer->resize_disabled);
 	kfree(iter->event);
@@ -6040,6 +6085,7 @@ int ring_buffer_subbuf_order_set(struct trace_buffer *buffer, int order)
 		/* Install the new pages, remove the head from the list */
 		cpu_buffer->pages = cpu_buffer->new_pages.next;
 		list_del_init(&cpu_buffer->new_pages);
+		cpu_buffer->cnt++;
 
 		cpu_buffer->head_page
 			= list_entry(cpu_buffer->pages, struct buffer_page, list);
-- 
2.43.0

[PATCH AUTOSEL 6.11 12/33] pinmux: Use sequential access to access desc->pinmux data

[Sasha Levin]

From: Mukesh Ojha <quic_mojha@quicinc.com>

[ Upstream commit 5a3e85c3c397c781393ea5fb2f45b1f60f8a4e6e ]

When two client of the same gpio call pinctrl_select_state() for the
same functionality, we are seeing NULL pointer issue while accessing
desc->mux_owner.

Let's say two processes A, B executing in pin_request() for the same pin
and process A updates the desc->mux_usecount but not yet updated the
desc->mux_owner while process B see the desc->mux_usecount which got
updated by A path and further executes strcmp and while accessing
desc->mux_owner it crashes with NULL pointer.

Serialize the access to mux related setting with a mutex lock.

	cpu0 (process A)			cpu1(process B)

pinctrl_select_state() {		  pinctrl_select_state() {
  pin_request() {				pin_request() {
  ...
						 ....
    } else {
         desc->mux_usecount++;
    						desc->mux_usecount && strcmp(desc->mux_owner, owner)) {

         if (desc->mux_usecount > 1)
               return 0;
         desc->mux_owner = owner;

  }						}

Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/20241014192930.1539673-1-quic_mojha@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/core.c   |   3 +
 drivers/pinctrl/core.h   |   1 +
 drivers/pinctrl/pinmux.c | 173 ++++++++++++++++++++++-----------------
 3 files changed, 100 insertions(+), 77 deletions(-)

diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index 314ab93d76918..35f1046db9b6a 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -220,6 +220,9 @@ static int pinctrl_register_one_pin(struct pinctrl_dev *pctldev,
 
 	/* Set owner */
 	pindesc->pctldev = pctldev;
+#ifdef CONFIG_PINMUX
+	mutex_init(&pindesc->mux_lock);
+#endif
 
 	/* Copy basic pin info */
 	if (pin->name) {
diff --git a/drivers/pinctrl/core.h b/drivers/pinctrl/core.h
index 4e07707d2435b..d6c24978e7081 100644
--- a/drivers/pinctrl/core.h
+++ b/drivers/pinctrl/core.h
@@ -177,6 +177,7 @@ struct pin_desc {
 	const char *mux_owner;
 	const struct pinctrl_setting_mux *mux_setting;
 	const char *gpio_owner;
+	struct mutex mux_lock;
 #endif
 };
 
diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c
index aae71a37219b2..90ca50d9efb6a 100644
--- a/drivers/pinctrl/pinmux.c
+++ b/drivers/pinctrl/pinmux.c
@@ -14,6 +14,7 @@
 
 #include <linux/array_size.h>
 #include <linux/ctype.h>
+#include <linux/cleanup.h>
 #include <linux/debugfs.h>
 #include <linux/device.h>
 #include <linux/err.h>
@@ -93,6 +94,7 @@ bool pinmux_can_be_used_for_gpio(struct pinctrl_dev *pctldev, unsigned int pin)
 	if (!desc || !ops)
 		return true;
 
+	guard(mutex)(&desc->mux_lock);
 	if (ops->strict && desc->mux_usecount)
 		return false;
 
@@ -127,29 +129,31 @@ static int pin_request(struct pinctrl_dev *pctldev,
 	dev_dbg(pctldev->dev, "request pin %d (%s) for %s\n",
 		pin, desc->name, owner);
 
-	if ((!gpio_range || ops->strict) &&
-	    desc->mux_usecount && strcmp(desc->mux_owner, owner)) {
-		dev_err(pctldev->dev,
-			"pin %s already requested by %s; cannot claim for %s\n",
-			desc->name, desc->mux_owner, owner);
-		goto out;
-	}
+	scoped_guard(mutex, &desc->mux_lock) {
+		if ((!gpio_range || ops->strict) &&
+		    desc->mux_usecount && strcmp(desc->mux_owner, owner)) {
+			dev_err(pctldev->dev,
+				"pin %s already requested by %s; cannot claim for %s\n",
+				desc->name, desc->mux_owner, owner);
+			goto out;
+		}
 
-	if ((gpio_range || ops->strict) && desc->gpio_owner) {
-		dev_err(pctldev->dev,
-			"pin %s already requested by %s; cannot claim for %s\n",
-			desc->name, desc->gpio_owner, owner);
-		goto out;
-	}
+		if ((gpio_range || ops->strict) && desc->gpio_owner) {
+			dev_err(pctldev->dev,
+				"pin %s already requested by %s; cannot claim for %s\n",
+				desc->name, desc->gpio_owner, owner);
+			goto out;
+		}
 
-	if (gpio_range) {
-		desc->gpio_owner = owner;
-	} else {
-		desc->mux_usecount++;
-		if (desc->mux_usecount > 1)
-			return 0;
+		if (gpio_range) {
+			desc->gpio_owner = owner;
+		} else {
+			desc->mux_usecount++;
+			if (desc->mux_usecount > 1)
+				return 0;
 
-		desc->mux_owner = owner;
+			desc->mux_owner = owner;
+		}
 	}
 
 	/* Let each pin increase references to this module */
@@ -178,12 +182,14 @@ static int pin_request(struct pinctrl_dev *pctldev,
 
 out_free_pin:
 	if (status) {
-		if (gpio_range) {
-			desc->gpio_owner = NULL;
-		} else {
-			desc->mux_usecount--;
-			if (!desc->mux_usecount)
-				desc->mux_owner = NULL;
+		scoped_guard(mutex, &desc->mux_lock) {
+			if (gpio_range) {
+				desc->gpio_owner = NULL;
+			} else {
+				desc->mux_usecount--;
+				if (!desc->mux_usecount)
+					desc->mux_owner = NULL;
+			}
 		}
 	}
 out:
@@ -219,15 +225,17 @@ static const char *pin_free(struct pinctrl_dev *pctldev, int pin,
 		return NULL;
 	}
 
-	if (!gpio_range) {
-		/*
-		 * A pin should not be freed more times than allocated.
-		 */
-		if (WARN_ON(!desc->mux_usecount))
-			return NULL;
-		desc->mux_usecount--;
-		if (desc->mux_usecount)
-			return NULL;
+	scoped_guard(mutex, &desc->mux_lock) {
+		if (!gpio_range) {
+			/*
+			 * A pin should not be freed more times than allocated.
+			 */
+			if (WARN_ON(!desc->mux_usecount))
+				return NULL;
+			desc->mux_usecount--;
+			if (desc->mux_usecount)
+				return NULL;
+		}
 	}
 
 	/*
@@ -239,13 +247,15 @@ static const char *pin_free(struct pinctrl_dev *pctldev, int pin,
 	else if (ops->free)
 		ops->free(pctldev, pin);
 
-	if (gpio_range) {
-		owner = desc->gpio_owner;
-		desc->gpio_owner = NULL;
-	} else {
-		owner = desc->mux_owner;
-		desc->mux_owner = NULL;
-		desc->mux_setting = NULL;
+	scoped_guard(mutex, &desc->mux_lock) {
+		if (gpio_range) {
+			owner = desc->gpio_owner;
+			desc->gpio_owner = NULL;
+		} else {
+			owner = desc->mux_owner;
+			desc->mux_owner = NULL;
+			desc->mux_setting = NULL;
+		}
 	}
 
 	module_put(pctldev->owner);
@@ -459,7 +469,8 @@ int pinmux_enable_setting(const struct pinctrl_setting *setting)
 				 pins[i]);
 			continue;
 		}
-		desc->mux_setting = &(setting->data.mux);
+		scoped_guard(mutex, &desc->mux_lock)
+			desc->mux_setting = &(setting->data.mux);
 	}
 
 	ret = ops->set_mux(pctldev, setting->data.mux.func,
@@ -473,8 +484,10 @@ int pinmux_enable_setting(const struct pinctrl_setting *setting)
 err_set_mux:
 	for (i = 0; i < num_pins; i++) {
 		desc = pin_desc_get(pctldev, pins[i]);
-		if (desc)
-			desc->mux_setting = NULL;
+		if (desc) {
+			scoped_guard(mutex, &desc->mux_lock)
+				desc->mux_setting = NULL;
+		}
 	}
 err_pin_request:
 	/* On error release all taken pins */
@@ -493,6 +506,7 @@ void pinmux_disable_setting(const struct pinctrl_setting *setting)
 	unsigned int num_pins = 0;
 	int i;
 	struct pin_desc *desc;
+	bool is_equal;
 
 	if (pctlops->get_group_pins)
 		ret = pctlops->get_group_pins(pctldev, setting->data.mux.group,
@@ -518,7 +532,10 @@ void pinmux_disable_setting(const struct pinctrl_setting *setting)
 				 pins[i]);
 			continue;
 		}
-		if (desc->mux_setting == &(setting->data.mux)) {
+		scoped_guard(mutex, &desc->mux_lock)
+			is_equal = (desc->mux_setting == &(setting->data.mux));
+
+		if (is_equal) {
 			pin_free(pctldev, pins[i], NULL);
 		} else {
 			const char *gname;
@@ -611,40 +628,42 @@ static int pinmux_pins_show(struct seq_file *s, void *what)
 		if (desc == NULL)
 			continue;
 
-		if (desc->mux_owner &&
-		    !strcmp(desc->mux_owner, pinctrl_dev_get_name(pctldev)))
-			is_hog = true;
-
-		if (pmxops->strict) {
-			if (desc->mux_owner)
-				seq_printf(s, "pin %d (%s): device %s%s",
-					   pin, desc->name, desc->mux_owner,
+		scoped_guard(mutex, &desc->mux_lock) {
+			if (desc->mux_owner &&
+			    !strcmp(desc->mux_owner, pinctrl_dev_get_name(pctldev)))
+				is_hog = true;
+
+			if (pmxops->strict) {
+				if (desc->mux_owner)
+					seq_printf(s, "pin %d (%s): device %s%s",
+						   pin, desc->name, desc->mux_owner,
+						   is_hog ? " (HOG)" : "");
+				else if (desc->gpio_owner)
+					seq_printf(s, "pin %d (%s): GPIO %s",
+						   pin, desc->name, desc->gpio_owner);
+				else
+					seq_printf(s, "pin %d (%s): UNCLAIMED",
+						   pin, desc->name);
+			} else {
+				/* For non-strict controllers */
+				seq_printf(s, "pin %d (%s): %s %s%s", pin, desc->name,
+					   desc->mux_owner ? desc->mux_owner
+					   : "(MUX UNCLAIMED)",
+					   desc->gpio_owner ? desc->gpio_owner
+					   : "(GPIO UNCLAIMED)",
 					   is_hog ? " (HOG)" : "");
-			else if (desc->gpio_owner)
-				seq_printf(s, "pin %d (%s): GPIO %s",
-					   pin, desc->name, desc->gpio_owner);
+			}
+
+			/* If mux: print function+group claiming the pin */
+			if (desc->mux_setting)
+				seq_printf(s, " function %s group %s\n",
+					   pmxops->get_function_name(pctldev,
+						desc->mux_setting->func),
+					   pctlops->get_group_name(pctldev,
+						desc->mux_setting->group));
 			else
-				seq_printf(s, "pin %d (%s): UNCLAIMED",
-					   pin, desc->name);
-		} else {
-			/* For non-strict controllers */
-			seq_printf(s, "pin %d (%s): %s %s%s", pin, desc->name,
-				   desc->mux_owner ? desc->mux_owner
-				   : "(MUX UNCLAIMED)",
-				   desc->gpio_owner ? desc->gpio_owner
-				   : "(GPIO UNCLAIMED)",
-				   is_hog ? " (HOG)" : "");
+				seq_putc(s, '\n');
 		}
-
-		/* If mux: print function+group claiming the pin */
-		if (desc->mux_setting)
-			seq_printf(s, " function %s group %s\n",
-				   pmxops->get_function_name(pctldev,
-					desc->mux_setting->func),
-				   pctlops->get_group_name(pctldev,
-					desc->mux_setting->group));
-		else
-			seq_putc(s, '\n');
 	}
 
 	mutex_unlock(&pctldev->mutex);
-- 
2.43.0

[PATCH AUTOSEL 6.11 13/33] scsi: ufs: core: Make DMA mask configuration more flexible

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit 78bc671bd1501e2f6c571e063301a4fdc5db53b2 ]

Replace UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS with
ufs_hba_variant_ops::set_dma_mask.  Update the Renesas driver
accordingly.  This patch enables supporting other configurations than
32-bit or 64-bit DMA addresses, e.g. 36-bit DMA addresses.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241018194753.775074-1-bvanassche@acm.org
Reviewed-by: Avri Altman <Avri.Altman@wdc.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ufs/core/ufshcd.c      | 4 ++--
 drivers/ufs/host/ufs-renesas.c | 9 ++++++++-
 include/ufs/ufshcd.h           | 9 +++------
 3 files changed, 13 insertions(+), 9 deletions(-)

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 03490f062d63a..5c64ef7334546 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -2398,8 +2398,6 @@ static inline int ufshcd_hba_capabilities(struct ufs_hba *hba)
 	int err;
 
 	hba->capabilities = ufshcd_readl(hba, REG_CONTROLLER_CAPABILITIES);
-	if (hba->quirks & UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS)
-		hba->capabilities &= ~MASK_64_ADDRESSING_SUPPORT;
 
 	/* nutrs and nutmrs are 0 based values */
 	hba->nutrs = (hba->capabilities & MASK_TRANSFER_REQUESTS_SLOTS_SDB) + 1;
@@ -10314,6 +10312,8 @@ EXPORT_SYMBOL_GPL(ufshcd_dealloc_host);
  */
 static int ufshcd_set_dma_mask(struct ufs_hba *hba)
 {
+	if (hba->vops && hba->vops->set_dma_mask)
+		return hba->vops->set_dma_mask(hba);
 	if (hba->capabilities & MASK_64_ADDRESSING_SUPPORT) {
 		if (!dma_set_mask_and_coherent(hba->dev, DMA_BIT_MASK(64)))
 			return 0;
diff --git a/drivers/ufs/host/ufs-renesas.c b/drivers/ufs/host/ufs-renesas.c
index 8711e5cbc9680..3ff97112e1f6d 100644
--- a/drivers/ufs/host/ufs-renesas.c
+++ b/drivers/ufs/host/ufs-renesas.c
@@ -7,6 +7,7 @@
 
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/iopoll.h>
 #include <linux/kernel.h>
@@ -364,14 +365,20 @@ static int ufs_renesas_init(struct ufs_hba *hba)
 		return -ENOMEM;
 	ufshcd_set_variant(hba, priv);
 
-	hba->quirks |= UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS | UFSHCD_QUIRK_HIBERN_FASTAUTO;
+	hba->quirks |= UFSHCD_QUIRK_HIBERN_FASTAUTO;
 
 	return 0;
 }
 
+static int ufs_renesas_set_dma_mask(struct ufs_hba *hba)
+{
+	return dma_set_mask_and_coherent(hba->dev, DMA_BIT_MASK(32));
+}
+
 static const struct ufs_hba_variant_ops ufs_renesas_vops = {
 	.name		= "renesas",
 	.init		= ufs_renesas_init,
+	.set_dma_mask	= ufs_renesas_set_dma_mask,
 	.setup_clocks	= ufs_renesas_setup_clocks,
 	.hce_enable_notify = ufs_renesas_hce_enable_notify,
 	.dbg_register_dump = ufs_renesas_dbg_register_dump,
diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
index 0fd2aebac7286..3fee38029bfee 100644
--- a/include/ufs/ufshcd.h
+++ b/include/ufs/ufshcd.h
@@ -298,6 +298,8 @@ struct ufs_pwr_mode_info {
  * @max_num_rtt: maximum RTT supported by the host
  * @init: called when the driver is initialized
  * @exit: called to cleanup everything done in init
+ * @set_dma_mask: For setting another DMA mask than indicated by the 64AS
+ *	capability bit.
  * @get_ufs_hci_version: called to get UFS HCI version
  * @clk_scale_notify: notifies that clks are scaled up/down
  * @setup_clocks: called before touching any of the controller registers
@@ -340,6 +342,7 @@ struct ufs_hba_variant_ops {
 	int	(*init)(struct ufs_hba *);
 	void    (*exit)(struct ufs_hba *);
 	u32	(*get_ufs_hci_version)(struct ufs_hba *);
+	int	(*set_dma_mask)(struct ufs_hba *);
 	int	(*clk_scale_notify)(struct ufs_hba *, bool,
 				    enum ufs_notify_change_status);
 	int	(*setup_clocks)(struct ufs_hba *, bool,
@@ -622,12 +625,6 @@ enum ufshcd_quirks {
 	 */
 	UFSHCD_QUIRK_SKIP_PH_CONFIGURATION		= 1 << 16,
 
-	/*
-	 * This quirk needs to be enabled if the host controller has
-	 * 64-bit addressing supported capability but it doesn't work.
-	 */
-	UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS		= 1 << 17,
-
 	/*
 	 * This quirk needs to be enabled if the host controller has
 	 * auto-hibernate capability but it's FASTAUTO only.
-- 
2.43.0

[PATCH AUTOSEL 6.11 14/33] mfd: axp20x: Allow multiple regulators

[Sasha Levin]

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit e37ec32188701efa01455b9be42a392adab06ce4 ]

At the moment trying to register a second AXP chip makes the probe fail,
as some sysfs registration fails due to a duplicate name:

...
[    3.688215] axp20x-i2c 0-0035: AXP20X driver loaded
[    3.695610] axp20x-i2c 0-0036: AXP20x variant AXP323 found
[    3.706151] sysfs: cannot create duplicate filename '/bus/platform/devices/axp20x-regulator'
[    3.714718] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc1-00026-g50bf2e2c079d-dirty #192
[    3.724020] Hardware name: Avaota A1 (DT)
[    3.728029] Call trace:
[    3.730477]  dump_backtrace+0x94/0xec
[    3.734146]  show_stack+0x18/0x24
[    3.737462]  dump_stack_lvl+0x80/0xf4
[    3.741128]  dump_stack+0x18/0x24
[    3.744444]  sysfs_warn_dup+0x64/0x80
[    3.748109]  sysfs_do_create_link_sd+0xf0/0xf8
[    3.752553]  sysfs_create_link+0x20/0x40
[    3.756476]  bus_add_device+0x64/0x104
[    3.760229]  device_add+0x310/0x760
[    3.763717]  platform_device_add+0x10c/0x238
[    3.767990]  mfd_add_device+0x4ec/0x5c8
[    3.771829]  mfd_add_devices+0x88/0x11c
[    3.775666]  axp20x_device_probe+0x70/0x184
[    3.779851]  axp20x_i2c_probe+0x9c/0xd8
...

This is because we use PLATFORM_DEVID_NONE for the mfd_add_devices()
call, which would number the child devices in the same 0-based way, even
for the second (or any other) instance.

Use PLATFORM_DEVID_AUTO instead, which automatically assigns
non-conflicting device numbers.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20241007001408.27249-4-andre.przywara@arm.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/axp20x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index dacd3c96c9f57..0983b6eec33da 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -1396,7 +1396,7 @@ int axp20x_device_probe(struct axp20x_dev *axp20x)
 		}
 	}
 
-	ret = mfd_add_devices(axp20x->dev, -1, axp20x->cells,
+	ret = mfd_add_devices(axp20x->dev, PLATFORM_DEVID_AUTO, axp20x->cells,
 			      axp20x->nr_cells, NULL, 0, NULL);
 
 	if (ret) {
-- 
2.43.0

[PATCH AUTOSEL 6.11 15/33] bpf: put bpf_link's program when link is safe to be deallocated

[Sasha Levin]

From: Andrii Nakryiko <andrii@kernel.org>

[ Upstream commit f44ec8733a8469143fde1984b5e6931b2e2f6f3f ]

In general, BPF link's underlying BPF program should be considered to be
reachable through attach hook -> link -> prog chain, and, pessimistically,
we have to assume that as long as link's memory is not safe to free,
attach hook's code might hold a pointer to BPF program and use it.

As such, it's not (generally) correct to put link's program early before
waiting for RCU GPs to go through. More eager bpf_prog_put() that we
currently do is mostly correct due to BPF program's release code doing
similar RCU GP waiting, but as will be shown in the following patches,
BPF program can be non-sleepable (and, thus, reliant on only "classic"
RCU GP), while BPF link's attach hook can have sleepable semantics and
needs to be protected by RCU Tasks Trace, and for such cases BPF link
has to go through RCU Tasks Trace + "classic" RCU GPs before being
deallocated. And so, if we put BPF program early, we might free BPF
program before we free BPF link, leading to use-after-free situation.

So, this patch defers bpf_prog_put() until we are ready to perform
bpf_link's deallocation. At worst, this delays BPF program freeing by
one extra RCU GP, but that seems completely acceptable. Alternatively,
we'd need more elaborate ways to determine BPF hook, BPF link, and BPF
program lifetimes, and how they relate to each other, which seems like
an unnecessary complication.

Note, for most BPF links we still will perform eager bpf_prog_put() and
link dealloc, so for those BPF links there are no observable changes
whatsoever. Only BPF links that use deferred dealloc might notice
slightly delayed freeing of BPF programs.

Also, to reduce code and logic duplication, extract program put + link
dealloc logic into bpf_link_dealloc() helper.

Link: https://lore.kernel.org/20241101181754.782341-1-andrii@kernel.org
Tested-by: Jordan Rife <jrife@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/syscall.c | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index b282ed1250358..8db9dd14472d0 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -3043,12 +3043,24 @@ void bpf_link_inc(struct bpf_link *link)
 	atomic64_inc(&link->refcnt);
 }
 
+static void bpf_link_dealloc(struct bpf_link *link)
+{
+	/* now that we know that bpf_link itself can't be reached, put underlying BPF program */
+	if (link->prog)
+		bpf_prog_put(link->prog);
+
+	/* free bpf_link and its containing memory */
+	if (link->ops->dealloc_deferred)
+		link->ops->dealloc_deferred(link);
+	else
+		link->ops->dealloc(link);
+}
+
 static void bpf_link_defer_dealloc_rcu_gp(struct rcu_head *rcu)
 {
 	struct bpf_link *link = container_of(rcu, struct bpf_link, rcu);
 
-	/* free bpf_link and its containing memory */
-	link->ops->dealloc_deferred(link);
+	bpf_link_dealloc(link);
 }
 
 static void bpf_link_defer_dealloc_mult_rcu_gp(struct rcu_head *rcu)
@@ -3070,7 +3082,6 @@ static void bpf_link_free(struct bpf_link *link)
 		sleepable = link->prog->sleepable;
 		/* detach BPF program, clean up used resources */
 		ops->release(link);
-		bpf_prog_put(link->prog);
 	}
 	if (ops->dealloc_deferred) {
 		/* schedule BPF link deallocation; if underlying BPF program
@@ -3081,8 +3092,9 @@ static void bpf_link_free(struct bpf_link *link)
 			call_rcu_tasks_trace(&link->rcu, bpf_link_defer_dealloc_mult_rcu_gp);
 		else
 			call_rcu(&link->rcu, bpf_link_defer_dealloc_rcu_gp);
-	} else if (ops->dealloc)
-		ops->dealloc(link);
+	} else if (ops->dealloc) {
+		bpf_link_dealloc(link);
+	}
 }
 
 static void bpf_link_put_deferred(struct work_struct *work)
-- 
2.43.0

[PATCH AUTOSEL 6.11 16/33] scsi: lpfc: Call lpfc_sli4_queue_unset() in restart and rmmod paths

[Sasha Levin]

From: Justin Tee <justin.tee@broadcom.com>

[ Upstream commit d35f7672715d1ff3e3ad9bb4ae6ac6cb484200fe ]

During initialization, the driver allocates wq->pring in lpfc_wq_create
and lpfc_sli4_queue_unset() is the only place where kfree(wq->pring) is
called.

There is a possible memory leak in lpfc_sli_brdrestart_s4() (restart)
and lpfc_pci_remove_one_s4() (rmmod) paths because there are no calls to
lpfc_sli4_queue_unset() to kfree() the wq->pring.

Fix by inserting a call to lpfc_sli4_queue_unset() in
lpfc_sli_brdrestart_s4() and lpfc_sli4_hba_unset() routines.  Also, add
a check for the SLI_ACTIVE flag before issuing the Q_DESTROY mailbox
command.  If not set, then the mailbox command will obviously fail.  In
such cases, skip issuing the mailbox command and only execute the driver
resource clean up portions of the lpfc_*q_destroy routines.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20241031223219.152342-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_init.c |  2 ++
 drivers/scsi/lpfc/lpfc_sli.c  | 41 ++++++++++++++++++++++++++++++-----
 2 files changed, 38 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 0c1404dc5f3bd..01f0f1f2a294f 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -13511,6 +13511,8 @@ lpfc_sli4_hba_unset(struct lpfc_hba *phba)
 	/* Disable FW logging to host memory */
 	lpfc_ras_stop_fwlog(phba);
 
+	lpfc_sli4_queue_unset(phba);
+
 	/* Reset SLI4 HBA FCoE function */
 	lpfc_pci_function_reset(phba);
 
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 7dc34c71eb78c..6f79e0cf6a753 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -5288,6 +5288,8 @@ lpfc_sli_brdrestart_s4(struct lpfc_hba *phba)
 			"0296 Restart HBA Data: x%x x%x\n",
 			phba->pport->port_state, psli->sli_flag);
 
+	lpfc_sli4_queue_unset(phba);
+
 	rc = lpfc_sli4_brdreset(phba);
 	if (rc) {
 		phba->link_state = LPFC_HBA_ERROR;
@@ -17616,6 +17618,9 @@ lpfc_eq_destroy(struct lpfc_hba *phba, struct lpfc_queue *eq)
 	if (!eq)
 		return -ENODEV;
 
+	if (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE))
+		goto list_remove;
+
 	mbox = mempool_alloc(eq->phba->mbox_mem_pool, GFP_KERNEL);
 	if (!mbox)
 		return -ENOMEM;
@@ -17642,10 +17647,12 @@ lpfc_eq_destroy(struct lpfc_hba *phba, struct lpfc_queue *eq)
 				shdr_status, shdr_add_status, rc);
 		status = -ENXIO;
 	}
+	mempool_free(mbox, eq->phba->mbox_mem_pool);
 
+list_remove:
 	/* Remove eq from any list */
 	list_del_init(&eq->list);
-	mempool_free(mbox, eq->phba->mbox_mem_pool);
+
 	return status;
 }
 
@@ -17673,6 +17680,10 @@ lpfc_cq_destroy(struct lpfc_hba *phba, struct lpfc_queue *cq)
 	/* sanity check on queue memory */
 	if (!cq)
 		return -ENODEV;
+
+	if (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE))
+		goto list_remove;
+
 	mbox = mempool_alloc(cq->phba->mbox_mem_pool, GFP_KERNEL);
 	if (!mbox)
 		return -ENOMEM;
@@ -17698,9 +17709,11 @@ lpfc_cq_destroy(struct lpfc_hba *phba, struct lpfc_queue *cq)
 				shdr_status, shdr_add_status, rc);
 		status = -ENXIO;
 	}
+	mempool_free(mbox, cq->phba->mbox_mem_pool);
+
+list_remove:
 	/* Remove cq from any list */
 	list_del_init(&cq->list);
-	mempool_free(mbox, cq->phba->mbox_mem_pool);
 	return status;
 }
 
@@ -17728,6 +17741,10 @@ lpfc_mq_destroy(struct lpfc_hba *phba, struct lpfc_queue *mq)
 	/* sanity check on queue memory */
 	if (!mq)
 		return -ENODEV;
+
+	if (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE))
+		goto list_remove;
+
 	mbox = mempool_alloc(mq->phba->mbox_mem_pool, GFP_KERNEL);
 	if (!mbox)
 		return -ENOMEM;
@@ -17753,9 +17770,11 @@ lpfc_mq_destroy(struct lpfc_hba *phba, struct lpfc_queue *mq)
 				shdr_status, shdr_add_status, rc);
 		status = -ENXIO;
 	}
+	mempool_free(mbox, mq->phba->mbox_mem_pool);
+
+list_remove:
 	/* Remove mq from any list */
 	list_del_init(&mq->list);
-	mempool_free(mbox, mq->phba->mbox_mem_pool);
 	return status;
 }
 
@@ -17783,6 +17802,10 @@ lpfc_wq_destroy(struct lpfc_hba *phba, struct lpfc_queue *wq)
 	/* sanity check on queue memory */
 	if (!wq)
 		return -ENODEV;
+
+	if (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE))
+		goto list_remove;
+
 	mbox = mempool_alloc(wq->phba->mbox_mem_pool, GFP_KERNEL);
 	if (!mbox)
 		return -ENOMEM;
@@ -17807,11 +17830,13 @@ lpfc_wq_destroy(struct lpfc_hba *phba, struct lpfc_queue *wq)
 				shdr_status, shdr_add_status, rc);
 		status = -ENXIO;
 	}
+	mempool_free(mbox, wq->phba->mbox_mem_pool);
+
+list_remove:
 	/* Remove wq from any list */
 	list_del_init(&wq->list);
 	kfree(wq->pring);
 	wq->pring = NULL;
-	mempool_free(mbox, wq->phba->mbox_mem_pool);
 	return status;
 }
 
@@ -17841,6 +17866,10 @@ lpfc_rq_destroy(struct lpfc_hba *phba, struct lpfc_queue *hrq,
 	/* sanity check on queue memory */
 	if (!hrq || !drq)
 		return -ENODEV;
+
+	if (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE))
+		goto list_remove;
+
 	mbox = mempool_alloc(hrq->phba->mbox_mem_pool, GFP_KERNEL);
 	if (!mbox)
 		return -ENOMEM;
@@ -17881,9 +17910,11 @@ lpfc_rq_destroy(struct lpfc_hba *phba, struct lpfc_queue *hrq,
 				shdr_status, shdr_add_status, rc);
 		status = -ENXIO;
 	}
+	mempool_free(mbox, hrq->phba->mbox_mem_pool);
+
+list_remove:
 	list_del_init(&hrq->list);
 	list_del_init(&drq->list);
-	mempool_free(mbox, hrq->phba->mbox_mem_pool);
 	return status;
 }
 
-- 
2.43.0

[PATCH AUTOSEL 6.11 17/33] scsi: lpfc: Check SLI_ACTIVE flag in FDMI cmpl before submitting follow up FDMI

[Sasha Levin]

From: Justin Tee <justin.tee@broadcom.com>

[ Upstream commit 98f8d3588097e321be70f83b844fa67d4828fe5c ]

The lpfc_cmpl_ct_disc_fdmi() routine has incorrect logic that treats an
FDMI completion with error LOCAL_REJECT/SLI_ABORTED as a success status.
Under the erroneous assumption of successful completion, the routine
proceeds to issue follow up FDMI commands, which may never complete if
the HBA is in an errata state as indicated by the errored completion
status.  Fix by freeing FDMI cmd resources and early return when the
LPFC_SLI_ACTIVE flag is not set and a LOCAL_REJECT/SLI_ABORTED or
SLI_DOWN status is received.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20241031223219.152342-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_ct.c | 21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 134bc96dd1340..ce3a1f42713dd 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -2226,6 +2226,11 @@ lpfc_cmpl_ct_disc_fdmi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		ulp_status, ulp_word4, latt);
 
 	if (latt || ulp_status) {
+		lpfc_printf_vlog(vport, KERN_WARNING, LOG_DISCOVERY,
+				 "0229 FDMI cmd %04x failed, latt = %d "
+				 "ulp_status: (x%x/x%x), sli_flag x%x\n",
+				 be16_to_cpu(fdmi_cmd), latt, ulp_status,
+				 ulp_word4, phba->sli.sli_flag);
 
 		/* Look for a retryable error */
 		if (ulp_status == IOSTAT_LOCAL_REJECT) {
@@ -2234,8 +2239,16 @@ lpfc_cmpl_ct_disc_fdmi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 			case IOERR_SLI_DOWN:
 				/* Driver aborted this IO.  No retry as error
 				 * is likely Offline->Online or some adapter
-				 * error.  Recovery will try again.
+				 * error.  Recovery will try again, but if port
+				 * is not active there's no point to continue
+				 * issuing follow up FDMI commands.
 				 */
+				if (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE)) {
+					free_ndlp = cmdiocb->ndlp;
+					lpfc_ct_free_iocb(phba, cmdiocb);
+					lpfc_nlp_put(free_ndlp);
+					return;
+				}
 				break;
 			case IOERR_ABORT_IN_PROGRESS:
 			case IOERR_SEQUENCE_TIMEOUT:
@@ -2256,12 +2269,6 @@ lpfc_cmpl_ct_disc_fdmi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 				break;
 			}
 		}
-
-		lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
-				 "0229 FDMI cmd %04x latt = %d "
-				 "ulp_status: x%x, rid x%x\n",
-				 be16_to_cpu(fdmi_cmd), latt, ulp_status,
-				 ulp_word4);
 	}
 
 	free_ndlp = cmdiocb->ndlp;
-- 
2.43.0

[PATCH AUTOSEL 6.11 18/33] scsi: lpfc: Prevent NDLP reference count underflow in dev_loss_tmo callback

[Sasha Levin]

From: Justin Tee <justin.tee@broadcom.com>

[ Upstream commit 4281f44ea8bfedd25938a0031bebba1473ece9ad ]

Current dev_loss_tmo handling checks whether there has been a previous
call to unregister with SCSI transport.  If so, the NDLP kref count is
decremented a second time in dev_loss_tmo as the final kref release.
However, this can sometimes result in a reference count underflow if
there is also a race to unregister with NVMe transport as well.  Add a
check for NVMe transport registration before decrementing the final
kref.  If NVMe transport is still registered, then the NVMe transport
unregistration is designated as the final kref decrement.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20241031223219.152342-8-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_hbadisc.c | 36 +++++++++++++++++++++-----------
 1 file changed, 24 insertions(+), 12 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 35c9181c6608a..bc19b060bac3c 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -155,6 +155,7 @@ lpfc_dev_loss_tmo_callbk(struct fc_rport *rport)
 	struct lpfc_hba   *phba;
 	struct lpfc_work_evt *evtp;
 	unsigned long iflags;
+	bool nvme_reg = false;
 
 	ndlp = ((struct lpfc_rport_data *)rport->dd_data)->pnode;
 	if (!ndlp)
@@ -177,38 +178,49 @@ lpfc_dev_loss_tmo_callbk(struct fc_rport *rport)
 	/* Don't schedule a worker thread event if the vport is going down. */
 	if (test_bit(FC_UNLOADING, &vport->load_flag) ||
 	    !test_bit(HBA_SETUP, &phba->hba_flag)) {
+
 		spin_lock_irqsave(&ndlp->lock, iflags);
 		ndlp->rport = NULL;
 
+		if (ndlp->fc4_xpt_flags & NVME_XPT_REGD)
+			nvme_reg = true;
+
 		/* The scsi_transport is done with the rport so lpfc cannot
-		 * call to unregister. Remove the scsi transport reference
-		 * and clean up the SCSI transport node details.
+		 * call to unregister.
 		 */
-		if (ndlp->fc4_xpt_flags & (NLP_XPT_REGD | SCSI_XPT_REGD)) {
+		if (ndlp->fc4_xpt_flags & SCSI_XPT_REGD) {
 			ndlp->fc4_xpt_flags &= ~SCSI_XPT_REGD;
 
-			/* NVME transport-registered rports need the
-			 * NLP_XPT_REGD flag to complete an unregister.
+			/* If NLP_XPT_REGD was cleared in lpfc_nlp_unreg_node,
+			 * unregister calls were made to the scsi and nvme
+			 * transports and refcnt was already decremented. Clear
+			 * the NLP_XPT_REGD flag only if the NVME Rport is
+			 * confirmed unregistered.
 			 */
-			if (!(ndlp->fc4_xpt_flags & NVME_XPT_REGD))
+			if (!nvme_reg && ndlp->fc4_xpt_flags & NLP_XPT_REGD) {
 				ndlp->fc4_xpt_flags &= ~NLP_XPT_REGD;
+				spin_unlock_irqrestore(&ndlp->lock, iflags);
+				lpfc_nlp_put(ndlp); /* may free ndlp */
+			} else {
+				spin_unlock_irqrestore(&ndlp->lock, iflags);
+			}
+		} else {
 			spin_unlock_irqrestore(&ndlp->lock, iflags);
-			lpfc_nlp_put(ndlp);
-			spin_lock_irqsave(&ndlp->lock, iflags);
 		}
 
+		spin_lock_irqsave(&ndlp->lock, iflags);
+
 		/* Only 1 thread can drop the initial node reference.  If
 		 * another thread has set NLP_DROPPED, this thread is done.
 		 */
-		if (!(ndlp->fc4_xpt_flags & NVME_XPT_REGD) &&
-		    !(ndlp->nlp_flag & NLP_DROPPED)) {
-			ndlp->nlp_flag |= NLP_DROPPED;
+		if (nvme_reg || (ndlp->nlp_flag & NLP_DROPPED)) {
 			spin_unlock_irqrestore(&ndlp->lock, iflags);
-			lpfc_nlp_put(ndlp);
 			return;
 		}
 
+		ndlp->nlp_flag |= NLP_DROPPED;
 		spin_unlock_irqrestore(&ndlp->lock, iflags);
+		lpfc_nlp_put(ndlp);
 		return;
 	}
 
-- 
2.43.0

[PATCH AUTOSEL 6.11 19/33] clk: qcom: rcg2: add clk_rcg2_shared_floor_ops

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit aec8c0e28ce4a1f89fd82fcc06a5cc73147e9817 ]

Generally SDCC clocks use clk_rcg2_floor_ops, however on SAR2130P
platform it's recommended to use rcg2_shared_ops for all Root Clock
Generators to park them instead of disabling. Implement a mix of those,
clk_rcg2_shared_floor_ops.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241027-sar2130p-clocks-v5-6-ecad2a1432ba@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/clk-rcg.h  |  1 +
 drivers/clk/qcom/clk-rcg2.c | 48 +++++++++++++++++++++++++++++++++----
 2 files changed, 44 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/qcom/clk-rcg.h b/drivers/clk/qcom/clk-rcg.h
index 8e0f3372dc7a8..80f1f4fcd52a6 100644
--- a/drivers/clk/qcom/clk-rcg.h
+++ b/drivers/clk/qcom/clk-rcg.h
@@ -198,6 +198,7 @@ extern const struct clk_ops clk_byte2_ops;
 extern const struct clk_ops clk_pixel_ops;
 extern const struct clk_ops clk_gfx3d_ops;
 extern const struct clk_ops clk_rcg2_shared_ops;
+extern const struct clk_ops clk_rcg2_shared_floor_ops;
 extern const struct clk_ops clk_rcg2_shared_no_init_park_ops;
 extern const struct clk_ops clk_dp_ops;
 
diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index bf26c5448f006..bf6406f5279a4 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -1186,15 +1186,23 @@ clk_rcg2_shared_force_enable_clear(struct clk_hw *hw, const struct freq_tbl *f)
 	return clk_rcg2_clear_force_enable(hw);
 }
 
-static int clk_rcg2_shared_set_rate(struct clk_hw *hw, unsigned long rate,
-				    unsigned long parent_rate)
+static int __clk_rcg2_shared_set_rate(struct clk_hw *hw, unsigned long rate,
+				      unsigned long parent_rate,
+				      enum freq_policy policy)
 {
 	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
 	const struct freq_tbl *f;
 
-	f = qcom_find_freq(rcg->freq_tbl, rate);
-	if (!f)
+	switch (policy) {
+	case FLOOR:
+		f = qcom_find_freq_floor(rcg->freq_tbl, rate);
+		break;
+	case CEIL:
+		f = qcom_find_freq(rcg->freq_tbl, rate);
+		break;
+	default:
 		return -EINVAL;
+	}
 
 	/*
 	 * In case clock is disabled, update the M, N and D registers, cache
@@ -1207,10 +1215,28 @@ static int clk_rcg2_shared_set_rate(struct clk_hw *hw, unsigned long rate,
 	return clk_rcg2_shared_force_enable_clear(hw, f);
 }
 
+static int clk_rcg2_shared_set_rate(struct clk_hw *hw, unsigned long rate,
+				    unsigned long parent_rate)
+{
+	return __clk_rcg2_shared_set_rate(hw, rate, parent_rate, CEIL);
+}
+
 static int clk_rcg2_shared_set_rate_and_parent(struct clk_hw *hw,
 		unsigned long rate, unsigned long parent_rate, u8 index)
 {
-	return clk_rcg2_shared_set_rate(hw, rate, parent_rate);
+	return __clk_rcg2_shared_set_rate(hw, rate, parent_rate, CEIL);
+}
+
+static int clk_rcg2_shared_set_floor_rate(struct clk_hw *hw, unsigned long rate,
+					  unsigned long parent_rate)
+{
+	return __clk_rcg2_shared_set_rate(hw, rate, parent_rate, FLOOR);
+}
+
+static int clk_rcg2_shared_set_floor_rate_and_parent(struct clk_hw *hw,
+		unsigned long rate, unsigned long parent_rate, u8 index)
+{
+	return __clk_rcg2_shared_set_rate(hw, rate, parent_rate, FLOOR);
 }
 
 static int clk_rcg2_shared_enable(struct clk_hw *hw)
@@ -1348,6 +1374,18 @@ const struct clk_ops clk_rcg2_shared_ops = {
 };
 EXPORT_SYMBOL_GPL(clk_rcg2_shared_ops);
 
+const struct clk_ops clk_rcg2_shared_floor_ops = {
+	.enable = clk_rcg2_shared_enable,
+	.disable = clk_rcg2_shared_disable,
+	.get_parent = clk_rcg2_shared_get_parent,
+	.set_parent = clk_rcg2_shared_set_parent,
+	.recalc_rate = clk_rcg2_shared_recalc_rate,
+	.determine_rate = clk_rcg2_determine_floor_rate,
+	.set_rate = clk_rcg2_shared_set_floor_rate,
+	.set_rate_and_parent = clk_rcg2_shared_set_floor_rate_and_parent,
+};
+EXPORT_SYMBOL_GPL(clk_rcg2_shared_floor_ops);
+
 static int clk_rcg2_shared_no_init_park(struct clk_hw *hw)
 {
 	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
-- 
2.43.0

[PATCH AUTOSEL 6.11 20/33] clk: qcom: rpmh: add support for SAR2130P

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit 2cc88de6261f01ebd4e2a3b4e29681fe87d0c089 ]

Define clocks as supported by the RPMh on the SAR2130P platform. The
msm-5.10 kernel declares just the CXO clock, the RF_CLK1 clock was added
following recommendation from Taniya Das.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20241027-sar2130p-clocks-v5-7-ecad2a1432ba@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/clk-rpmh.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
index 4acde937114af..eefc322ce3679 100644
--- a/drivers/clk/qcom/clk-rpmh.c
+++ b/drivers/clk/qcom/clk-rpmh.c
@@ -389,6 +389,18 @@ DEFINE_CLK_RPMH_BCM(ipa, "IP0");
 DEFINE_CLK_RPMH_BCM(pka, "PKA0");
 DEFINE_CLK_RPMH_BCM(qpic_clk, "QP0");
 
+static struct clk_hw *sar2130p_rpmh_clocks[] = {
+	[RPMH_CXO_CLK]		= &clk_rpmh_bi_tcxo_div1.hw,
+	[RPMH_CXO_CLK_A]	= &clk_rpmh_bi_tcxo_div1_ao.hw,
+	[RPMH_RF_CLK1]		= &clk_rpmh_rf_clk1_a.hw,
+	[RPMH_RF_CLK1_A]	= &clk_rpmh_rf_clk1_a_ao.hw,
+};
+
+static const struct clk_rpmh_desc clk_rpmh_sar2130p = {
+	.clks = sar2130p_rpmh_clocks,
+	.num_clks = ARRAY_SIZE(sar2130p_rpmh_clocks),
+};
+
 static struct clk_hw *sdm845_rpmh_clocks[] = {
 	[RPMH_CXO_CLK]		= &clk_rpmh_bi_tcxo_div2.hw,
 	[RPMH_CXO_CLK_A]	= &clk_rpmh_bi_tcxo_div2_ao.hw,
@@ -880,6 +892,7 @@ static int clk_rpmh_probe(struct platform_device *pdev)
 static const struct of_device_id clk_rpmh_match_table[] = {
 	{ .compatible = "qcom,qdu1000-rpmh-clk", .data = &clk_rpmh_qdu1000},
 	{ .compatible = "qcom,sa8775p-rpmh-clk", .data = &clk_rpmh_sa8775p},
+	{ .compatible = "qcom,sar2130p-rpmh-clk", .data = &clk_rpmh_sar2130p},
 	{ .compatible = "qcom,sc7180-rpmh-clk", .data = &clk_rpmh_sc7180},
 	{ .compatible = "qcom,sc8180x-rpmh-clk", .data = &clk_rpmh_sc8180x},
 	{ .compatible = "qcom,sc8280xp-rpmh-clk", .data = &clk_rpmh_sc8280xp},
-- 
2.43.0

[PATCH AUTOSEL 6.11 21/33] clk: qcom: tcsrcc-sm8550: add SAR2130P support

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit d2e0a043530b9d6f37a8de8f05e0725667aba0a6 ]

The SAR2130P platform has the same TCSR Clock Controller as the SM8550,
except for the lack of the UFS clocks. Extend the SM8550 TCSRCC driver
to support SAR2130P.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241027-sar2130p-clocks-v5-9-ecad2a1432ba@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/tcsrcc-sm8550.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/qcom/tcsrcc-sm8550.c b/drivers/clk/qcom/tcsrcc-sm8550.c
index e5e8f2e82b949..41d73f92a000a 100644
--- a/drivers/clk/qcom/tcsrcc-sm8550.c
+++ b/drivers/clk/qcom/tcsrcc-sm8550.c
@@ -129,6 +129,13 @@ static struct clk_branch tcsr_usb3_clkref_en = {
 	},
 };
 
+static struct clk_regmap *tcsr_cc_sar2130p_clocks[] = {
+	[TCSR_PCIE_0_CLKREF_EN] = &tcsr_pcie_0_clkref_en.clkr,
+	[TCSR_PCIE_1_CLKREF_EN] = &tcsr_pcie_1_clkref_en.clkr,
+	[TCSR_USB2_CLKREF_EN] = &tcsr_usb2_clkref_en.clkr,
+	[TCSR_USB3_CLKREF_EN] = &tcsr_usb3_clkref_en.clkr,
+};
+
 static struct clk_regmap *tcsr_cc_sm8550_clocks[] = {
 	[TCSR_PCIE_0_CLKREF_EN] = &tcsr_pcie_0_clkref_en.clkr,
 	[TCSR_PCIE_1_CLKREF_EN] = &tcsr_pcie_1_clkref_en.clkr,
@@ -146,6 +153,12 @@ static const struct regmap_config tcsr_cc_sm8550_regmap_config = {
 	.fast_io = true,
 };
 
+static const struct qcom_cc_desc tcsr_cc_sar2130p_desc = {
+	.config = &tcsr_cc_sm8550_regmap_config,
+	.clks = tcsr_cc_sar2130p_clocks,
+	.num_clks = ARRAY_SIZE(tcsr_cc_sar2130p_clocks),
+};
+
 static const struct qcom_cc_desc tcsr_cc_sm8550_desc = {
 	.config = &tcsr_cc_sm8550_regmap_config,
 	.clks = tcsr_cc_sm8550_clocks,
@@ -153,7 +166,8 @@ static const struct qcom_cc_desc tcsr_cc_sm8550_desc = {
 };
 
 static const struct of_device_id tcsr_cc_sm8550_match_table[] = {
-	{ .compatible = "qcom,sm8550-tcsr" },
+	{ .compatible = "qcom,sar2130p-tcsr", .data = &tcsr_cc_sar2130p_desc },
+	{ .compatible = "qcom,sm8550-tcsr", .data = &tcsr_cc_sm8550_desc },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, tcsr_cc_sm8550_match_table);
@@ -162,7 +176,7 @@ static int tcsr_cc_sm8550_probe(struct platform_device *pdev)
 {
 	struct regmap *regmap;
 
-	regmap = qcom_cc_map(pdev, &tcsr_cc_sm8550_desc);
+	regmap = qcom_cc_map(pdev, of_device_get_match_data(&pdev->dev));
 	if (IS_ERR(regmap))
 		return PTR_ERR(regmap);
 
-- 
2.43.0

[PATCH AUTOSEL 6.11 22/33] clk: qcom: clk-alpha-pll: Add NSS HUAYRA ALPHA PLL support for ipq9574

[Sasha Levin]

From: Devi Priya <quic_devipriy@quicinc.com>

[ Upstream commit 79dfed29aa3f714e0a94a39b2bfe9ac14ce19a6a ]

Add support for NSS Huayra alpha pll found on ipq9574 SoCs.
Programming sequence is the same as that of Huayra type Alpha PLL,
so we can re-use the same.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Link: https://lore.kernel.org/r/20241028060506.246606-2-quic_srichara@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/clk-alpha-pll.c | 11 +++++++++++
 drivers/clk/qcom/clk-alpha-pll.h |  1 +
 2 files changed, 12 insertions(+)

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 8478bccd2533e..c91661921833c 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -267,6 +267,17 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
 		[PLL_OFF_OPMODE] = 0x30,
 		[PLL_OFF_STATUS] = 0x3c,
 	},
+	[CLK_ALPHA_PLL_TYPE_NSS_HUAYRA] =  {
+		[PLL_OFF_L_VAL] = 0x04,
+		[PLL_OFF_ALPHA_VAL] = 0x08,
+		[PLL_OFF_TEST_CTL] = 0x0c,
+		[PLL_OFF_TEST_CTL_U] = 0x10,
+		[PLL_OFF_USER_CTL] = 0x14,
+		[PLL_OFF_CONFIG_CTL] = 0x18,
+		[PLL_OFF_CONFIG_CTL_U] = 0x1c,
+		[PLL_OFF_STATUS] = 0x20,
+	},
+
 };
 EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
 
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index e2cf5c7e501d0..b3ef043fdef3d 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -31,6 +31,7 @@ enum {
 	CLK_ALPHA_PLL_TYPE_BRAMMO_EVO,
 	CLK_ALPHA_PLL_TYPE_STROMER,
 	CLK_ALPHA_PLL_TYPE_STROMER_PLUS,
+	CLK_ALPHA_PLL_TYPE_NSS_HUAYRA,
 	CLK_ALPHA_PLL_TYPE_MAX,
 };
 
-- 
2.43.0

[PATCH AUTOSEL 6.11 23/33] leds: class: Protect brightness_show() with led_cdev->led_access mutex

[Sasha Levin]

From: Mukesh Ojha <quic_mojha@quicinc.com>

[ Upstream commit 4ca7cd938725a4050dcd62ae9472e931d603118d ]

There is NULL pointer issue observed if from Process A where hid device
being added which results in adding a led_cdev addition and later a
another call to access of led_cdev attribute from Process B can result
in NULL pointer issue.

Use mutex led_cdev->led_access to protect access to led->cdev and its
attribute inside brightness_show() and max_brightness_show() and also
update the comment for mutex that it should be used to protect the led
class device fields.

	Process A 				Process B

 kthread+0x114
 worker_thread+0x244
 process_scheduled_works+0x248
 uhid_device_add_worker+0x24
 hid_add_device+0x120
 device_add+0x268
 bus_probe_device+0x94
 device_initial_probe+0x14
 __device_attach+0xfc
 bus_for_each_drv+0x10c
 __device_attach_driver+0x14c
 driver_probe_device+0x3c
 __driver_probe_device+0xa0
 really_probe+0x190
 hid_device_probe+0x130
 ps_probe+0x990
 ps_led_register+0x94
 devm_led_classdev_register_ext+0x58
 led_classdev_register_ext+0x1f8
 device_create_with_groups+0x48
 device_create_groups_vargs+0xc8
 device_add+0x244
 kobject_uevent+0x14
 kobject_uevent_env[jt]+0x224
 mutex_unlock[jt]+0xc4
 __mutex_unlock_slowpath+0xd4
 wake_up_q+0x70
 try_to_wake_up[jt]+0x48c
 preempt_schedule_common+0x28
 __schedule+0x628
 __switch_to+0x174
						el0t_64_sync+0x1a8/0x1ac
						el0t_64_sync_handler+0x68/0xbc
						el0_svc+0x38/0x68
						do_el0_svc+0x1c/0x28
						el0_svc_common+0x80/0xe0
						invoke_syscall+0x58/0x114
						__arm64_sys_read+0x1c/0x2c
						ksys_read+0x78/0xe8
						vfs_read+0x1e0/0x2c8
						kernfs_fop_read_iter+0x68/0x1b4
						seq_read_iter+0x158/0x4ec
						kernfs_seq_show+0x44/0x54
						sysfs_kf_seq_show+0xb4/0x130
						dev_attr_show+0x38/0x74
						brightness_show+0x20/0x4c
						dualshock4_led_get_brightness+0xc/0x74

[ 3313.874295][ T4013] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060
[ 3313.874301][ T4013] Mem abort info:
[ 3313.874303][ T4013]   ESR = 0x0000000096000006
[ 3313.874305][ T4013]   EC = 0x25: DABT (current EL), IL = 32 bits
[ 3313.874307][ T4013]   SET = 0, FnV = 0
[ 3313.874309][ T4013]   EA = 0, S1PTW = 0
[ 3313.874311][ T4013]   FSC = 0x06: level 2 translation fault
[ 3313.874313][ T4013] Data abort info:
[ 3313.874314][ T4013]   ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000
[ 3313.874316][ T4013]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 3313.874318][ T4013]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 3313.874320][ T4013] user pgtable: 4k pages, 39-bit VAs, pgdp=00000008f2b0a000
..

[ 3313.874332][ T4013] Dumping ftrace buffer:
[ 3313.874334][ T4013]    (ftrace buffer empty)
..
..
[ dd3313.874639][ T4013] CPU: 6 PID: 4013 Comm: InputReader
[ 3313.874648][ T4013] pc : dualshock4_led_get_brightness+0xc/0x74
[ 3313.874653][ T4013] lr : led_update_brightness+0x38/0x60
[ 3313.874656][ T4013] sp : ffffffc0b910bbd0
..
..
[ 3313.874685][ T4013] Call trace:
[ 3313.874687][ T4013]  dualshock4_led_get_brightness+0xc/0x74
[ 3313.874690][ T4013]  brightness_show+0x20/0x4c
[ 3313.874692][ T4013]  dev_attr_show+0x38/0x74
[ 3313.874696][ T4013]  sysfs_kf_seq_show+0xb4/0x130
[ 3313.874700][ T4013]  kernfs_seq_show+0x44/0x54
[ 3313.874703][ T4013]  seq_read_iter+0x158/0x4ec
[ 3313.874705][ T4013]  kernfs_fop_read_iter+0x68/0x1b4
[ 3313.874708][ T4013]  vfs_read+0x1e0/0x2c8
[ 3313.874711][ T4013]  ksys_read+0x78/0xe8
[ 3313.874714][ T4013]  __arm64_sys_read+0x1c/0x2c
[ 3313.874718][ T4013]  invoke_syscall+0x58/0x114
[ 3313.874721][ T4013]  el0_svc_common+0x80/0xe0
[ 3313.874724][ T4013]  do_el0_svc+0x1c/0x28
[ 3313.874727][ T4013]  el0_svc+0x38/0x68
[ 3313.874730][ T4013]  el0t_64_sync_handler+0x68/0xbc
[ 3313.874732][ T4013]  el0t_64_sync+0x1a8/0x1ac

Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Anish Kumar <yesanishhere@gmail.com>
Link: https://lore.kernel.org/r/20241103160527.82487-1-quic_mojha@quicinc.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/leds/led-class.c | 14 +++++++++++---
 include/linux/leds.h     |  2 +-
 2 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index 06b97fd49ad9a..f69f4e928d614 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -29,11 +29,14 @@ static ssize_t brightness_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
 	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	unsigned int brightness;
 
-	/* no lock needed for this */
+	mutex_lock(&led_cdev->led_access);
 	led_update_brightness(led_cdev);
+	brightness = led_cdev->brightness;
+	mutex_unlock(&led_cdev->led_access);
 
-	return sprintf(buf, "%u\n", led_cdev->brightness);
+	return sprintf(buf, "%u\n", brightness);
 }
 
 static ssize_t brightness_store(struct device *dev,
@@ -70,8 +73,13 @@ static ssize_t max_brightness_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
 	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	unsigned int max_brightness;
+
+	mutex_lock(&led_cdev->led_access);
+	max_brightness = led_cdev->max_brightness;
+	mutex_unlock(&led_cdev->led_access);
 
-	return sprintf(buf, "%u\n", led_cdev->max_brightness);
+	return sprintf(buf, "%u\n", max_brightness);
 }
 static DEVICE_ATTR_RO(max_brightness);
 
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 6885603f211bb..025345da12d59 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -238,7 +238,7 @@ struct led_classdev {
 	struct kernfs_node	*brightness_hw_changed_kn;
 #endif
 
-	/* Ensures consistent access to the LED Flash Class device */
+	/* Ensures consistent access to the LED class device */
 	struct mutex		led_access;
 };
 
-- 
2.43.0

[PATCH AUTOSEL 6.11 24/33] scsi: st: Don't modify unknown block number in MTIOCGET

[Sasha Levin]

From: Kai Mäkisara <Kai.Makisara@kolumbus.fi>

[ Upstream commit 5bb2d6179d1a8039236237e1e94cfbda3be1ed9e ]

Struct mtget field mt_blkno -1 means it is unknown. Don't add anything to
it.

Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219419#c14
Link: https://lore.kernel.org/r/20241106095723.63254-2-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/st.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index d50bad3a2ce92..9f480a1b4a81a 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -3756,7 +3756,7 @@ static long st_ioctl(struct file *file, unsigned int cmd_in, unsigned long arg)
 		    ((STp->density << MT_ST_DENSITY_SHIFT) & MT_ST_DENSITY_MASK);
 		mt_status.mt_blkno = STps->drv_block;
 		mt_status.mt_fileno = STps->drv_file;
-		if (STp->block_size != 0) {
+		if (STp->block_size != 0 && mt_status.mt_blkno >= 0) {
 			if (STps->rw == ST_WRITING)
 				mt_status.mt_blkno +=
 				    (STp->buffer)->buffer_bytes / STp->block_size;
-- 
2.43.0

[PATCH AUTOSEL 6.11 25/33] scsi: st: Add MTIOCGET and MTLOAD to ioctls allowed after device reset

[Sasha Levin]

From: Kai Mäkisara <Kai.Makisara@kolumbus.fi>

[ Upstream commit 0b120edb37dc9dd8ca82893d386922eb6b16f860 ]

Most drives rewind the tape when the device is reset. Reading and writing
are not allowed until something is done to make the tape position match the
user's expectation (e.g., rewind the tape). Add MTIOCGET and MTLOAD to
operations allowed after reset. MTIOCGET is modified to not touch the tape
if pos_unknown is non-zero. The tape location is known after MTLOAD.

Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219419#c14
Link: https://lore.kernel.org/r/20241106095723.63254-3-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/st.c | 29 +++++++++++++++++++++--------
 1 file changed, 21 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 9f480a1b4a81a..4863802371a70 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -3506,6 +3506,7 @@ static long st_ioctl(struct file *file, unsigned int cmd_in, unsigned long arg)
 	int i, cmd_nr, cmd_type, bt;
 	int retval = 0;
 	unsigned int blk;
+	bool cmd_mtiocget;
 	struct scsi_tape *STp = file->private_data;
 	struct st_modedef *STm;
 	struct st_partstat *STps;
@@ -3619,6 +3620,7 @@ static long st_ioctl(struct file *file, unsigned int cmd_in, unsigned long arg)
 			 */
 			if (mtc.mt_op != MTREW &&
 			    mtc.mt_op != MTOFFL &&
+			    mtc.mt_op != MTLOAD &&
 			    mtc.mt_op != MTRETEN &&
 			    mtc.mt_op != MTERASE &&
 			    mtc.mt_op != MTSEEK &&
@@ -3732,17 +3734,28 @@ static long st_ioctl(struct file *file, unsigned int cmd_in, unsigned long arg)
 		goto out;
 	}
 
+	cmd_mtiocget = cmd_type == _IOC_TYPE(MTIOCGET) && cmd_nr == _IOC_NR(MTIOCGET);
+
 	if ((i = flush_buffer(STp, 0)) < 0) {
-		retval = i;
-		goto out;
-	}
-	if (STp->can_partitions &&
-	    (i = switch_partition(STp)) < 0) {
-		retval = i;
-		goto out;
+		if (cmd_mtiocget && STp->pos_unknown) {
+			/* flush fails -> modify status accordingly */
+			reset_state(STp);
+			STp->pos_unknown = 1;
+		} else { /* return error */
+			retval = i;
+			goto out;
+		}
+	} else { /* flush_buffer succeeds */
+		if (STp->can_partitions) {
+			i = switch_partition(STp);
+			if (i < 0) {
+				retval = i;
+				goto out;
+			}
+		}
 	}
 
-	if (cmd_type == _IOC_TYPE(MTIOCGET) && cmd_nr == _IOC_NR(MTIOCGET)) {
+	if (cmd_mtiocget) {
 		struct mtget mt_status;
 
 		if (_IOC_SIZE(cmd_in) != sizeof(struct mtget)) {
-- 
2.43.0

[PATCH AUTOSEL 6.11 26/33] pinctrl: qcom-pmic-gpio: add support for PM8937

[Sasha Levin]

From: Barnabás Czémán <barnabas.czeman@mainlining.org>

[ Upstream commit 89265a58ff24e3885c2c9ca722bc3aaa47018be9 ]

PM8937 has 8 GPIO-s with holes on GPIO3, GPIO4 and GPIO6.

Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/20241031-msm8917-v2-2-8a075faa89b1@mainlining.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index d2dd66769aa89..79ee60514372d 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -1226,6 +1226,8 @@ static const struct of_device_id pmic_gpio_of_match[] = {
 	{ .compatible = "qcom,pm8550ve-gpio", .data = (void *) 8 },
 	{ .compatible = "qcom,pm8550vs-gpio", .data = (void *) 6 },
 	{ .compatible = "qcom,pm8916-gpio", .data = (void *) 4 },
+	/* pm8937 has 8 GPIOs with holes on 3, 4 and 6 */
+	{ .compatible = "qcom,pm8937-gpio", .data = (void *) 8 },
 	{ .compatible = "qcom,pm8941-gpio", .data = (void *) 36 },
 	/* pm8950 has 8 GPIOs with holes on 3 */
 	{ .compatible = "qcom,pm8950-gpio", .data = (void *) 8 },
-- 
2.43.0

[PATCH AUTOSEL 6.11 27/33] pinctrl: qcom: spmi-mpp: Add PM8937 compatible

[Sasha Levin]

From: Barnabás Czémán <barnabas.czeman@mainlining.org>

[ Upstream commit f755261190e88f5d19fe0a3b762f0bbaff6bd438 ]

The PM8937 provides 4 MPPs.
Add a compatible to support them.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/20241031-msm8917-v2-4-8a075faa89b1@mainlining.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/qcom/pinctrl-spmi-mpp.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
index d16ece90d926c..5fa04e7c1d5c4 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c
@@ -983,6 +983,7 @@ static const struct of_device_id pmic_mpp_of_match[] = {
 	{ .compatible = "qcom,pm8226-mpp", .data = (void *) 8 },
 	{ .compatible = "qcom,pm8841-mpp", .data = (void *) 4 },
 	{ .compatible = "qcom,pm8916-mpp", .data = (void *) 4 },
+	{ .compatible = "qcom,pm8937-mpp", .data = (void *) 4 },
 	{ .compatible = "qcom,pm8941-mpp", .data = (void *) 8 },
 	{ .compatible = "qcom,pm8950-mpp", .data = (void *) 4 },
 	{ .compatible = "qcom,pmi8950-mpp", .data = (void *) 4 },
-- 
2.43.0

[PATCH AUTOSEL 6.11 28/33] thermal/drivers/qcom/tsens-v1: Add support for MSM8937 tsens

[Sasha Levin]

From: Barnabás Czémán <barnabas.czeman@mainlining.org>

[ Upstream commit e2ffb6c3a40ee714160e35e61f0a984028b5d550 ]

Add support for tsens v1.4 block what can be found in
MSM8937 and MSM8917.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20241113-msm8917-v6-5-c348fb599fef@mainlining.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/qcom/tsens-v1.c | 21 ++++++++++++++-------
 drivers/thermal/qcom/tsens.c    |  3 +++
 drivers/thermal/qcom/tsens.h    |  2 +-
 3 files changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
index dc1c4ae2d8b01..1a7874676f68e 100644
--- a/drivers/thermal/qcom/tsens-v1.c
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -162,28 +162,35 @@ struct tsens_plat_data data_tsens_v1 = {
 	.fields	= tsens_v1_regfields,
 };
 
-static const struct tsens_ops ops_8956 = {
-	.init		= init_8956,
+static const struct tsens_ops ops_common = {
+	.init		= init_common,
 	.calibrate	= tsens_calibrate_common,
 	.get_temp	= get_temp_tsens_valid,
 };
 
-struct tsens_plat_data data_8956 = {
+struct tsens_plat_data data_8937 = {
 	.num_sensors	= 11,
-	.ops		= &ops_8956,
+	.ops		= &ops_common,
 	.feat		= &tsens_v1_feat,
 	.fields		= tsens_v1_regfields,
 };
 
-static const struct tsens_ops ops_8976 = {
-	.init		= init_common,
+static const struct tsens_ops ops_8956 = {
+	.init		= init_8956,
 	.calibrate	= tsens_calibrate_common,
 	.get_temp	= get_temp_tsens_valid,
 };
 
+struct tsens_plat_data data_8956 = {
+	.num_sensors	= 11,
+	.ops		= &ops_8956,
+	.feat		= &tsens_v1_feat,
+	.fields		= tsens_v1_regfields,
+};
+
 struct tsens_plat_data data_8976 = {
 	.num_sensors	= 11,
-	.ops		= &ops_8976,
+	.ops		= &ops_common,
 	.feat		= &tsens_v1_feat,
 	.fields		= tsens_v1_regfields,
 };
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 0b4421bf47854..d2db804692f01 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -1119,6 +1119,9 @@ static const struct of_device_id tsens_table[] = {
 	}, {
 		.compatible = "qcom,msm8916-tsens",
 		.data = &data_8916,
+	}, {
+		.compatible = "qcom,msm8937-tsens",
+		.data = &data_8937,
 	}, {
 		.compatible = "qcom,msm8939-tsens",
 		.data = &data_8939,
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index cab39de045b10..7b36a0318fa6a 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -647,7 +647,7 @@ extern struct tsens_plat_data data_8960;
 extern struct tsens_plat_data data_8226, data_8909, data_8916, data_8939, data_8974, data_9607;
 
 /* TSENS v1 targets */
-extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956;
+extern struct tsens_plat_data data_tsens_v1, data_8937, data_8976, data_8956;
 
 /* TSENS v2 targets */
 extern struct tsens_plat_data data_8996, data_ipq8074, data_tsens_v2;
-- 
2.43.0

[PATCH AUTOSEL 6.11 29/33] nvdimm: rectify the illogical code within nd_dax_probe()

[Sasha Levin]

From: Yi Yang <yiyang13@huawei.com>

[ Upstream commit b61352101470f8b68c98af674e187cfaa7c43504 ]

When nd_dax is NULL, nd_pfn is consequently NULL as well. Nevertheless,
it is inadvisable to perform pointer arithmetic or address-taking on a
NULL pointer.
Introduce the nd_dax_devinit() function to enhance the code's logic and
improve its readability.

Signed-off-by: Yi Yang <yiyang13@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20241108085526.527957-1-yiyang13@huawei.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvdimm/dax_devs.c | 4 ++--
 drivers/nvdimm/nd.h       | 7 +++++++
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/nvdimm/dax_devs.c b/drivers/nvdimm/dax_devs.c
index 6b4922de30477..37b743acbb7ba 100644
--- a/drivers/nvdimm/dax_devs.c
+++ b/drivers/nvdimm/dax_devs.c
@@ -106,12 +106,12 @@ int nd_dax_probe(struct device *dev, struct nd_namespace_common *ndns)
 
 	nvdimm_bus_lock(&ndns->dev);
 	nd_dax = nd_dax_alloc(nd_region);
-	nd_pfn = &nd_dax->nd_pfn;
-	dax_dev = nd_pfn_devinit(nd_pfn, ndns);
+	dax_dev = nd_dax_devinit(nd_dax, ndns);
 	nvdimm_bus_unlock(&ndns->dev);
 	if (!dax_dev)
 		return -ENOMEM;
 	pfn_sb = devm_kmalloc(dev, sizeof(*pfn_sb), GFP_KERNEL);
+	nd_pfn = &nd_dax->nd_pfn;
 	nd_pfn->pfn_sb = pfn_sb;
 	rc = nd_pfn_validate(nd_pfn, DAX_SIG);
 	dev_dbg(dev, "dax: %s\n", rc == 0 ? dev_name(dax_dev) : "<none>");
diff --git a/drivers/nvdimm/nd.h b/drivers/nvdimm/nd.h
index 2dbb1dca17b53..5ca06e9a2d292 100644
--- a/drivers/nvdimm/nd.h
+++ b/drivers/nvdimm/nd.h
@@ -600,6 +600,13 @@ struct nd_dax *to_nd_dax(struct device *dev);
 int nd_dax_probe(struct device *dev, struct nd_namespace_common *ndns);
 bool is_nd_dax(const struct device *dev);
 struct device *nd_dax_create(struct nd_region *nd_region);
+static inline struct device *nd_dax_devinit(struct nd_dax *nd_dax,
+					    struct nd_namespace_common *ndns)
+{
+	if (!nd_dax)
+		return NULL;
+	return nd_pfn_devinit(&nd_dax->nd_pfn, ndns);
+}
 #else
 static inline int nd_dax_probe(struct device *dev,
 		struct nd_namespace_common *ndns)
-- 
2.43.0

[PATCH AUTOSEL 6.11 30/33] smb: client: memcpy() with surrounding object base address

[Sasha Levin]

From: Kees Cook <kees@kernel.org>

[ Upstream commit f69b0187f8745a7a9584f6b13f5e792594b88b2e ]

Like commit f1f047bd7ce0 ("smb: client: Fix -Wstringop-overflow issues"),
adjust the memcpy() destination address to be based off the surrounding
object rather than based off the 4-byte "Protocol" member. This avoids a
build-time warning when compiling under CONFIG_FORTIFY_SOURCE with GCC 15:

In function 'fortify_memcpy_chk',
    inlined from 'CIFSSMBSetPathInfo' at ../fs/smb/client/cifssmb.c:5358:2:
../include/linux/fortify-string.h:571:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
  571 |                         __write_overflow_field(p_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/cifssmb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/smb/client/cifssmb.c b/fs/smb/client/cifssmb.c
index cfae2e9182099..b681024748fd0 100644
--- a/fs/smb/client/cifssmb.c
+++ b/fs/smb/client/cifssmb.c
@@ -5407,7 +5407,7 @@ CIFSSMBSetPathInfo(const unsigned int xid, struct cifs_tcon *tcon,
 	param_offset = offsetof(struct smb_com_transaction2_spi_req,
 				InformationLevel) - 4;
 	offset = param_offset + params;
-	data_offset = (char *) (&pSMB->hdr.Protocol) + offset;
+	data_offset = (char *)pSMB + offsetof(typeof(*pSMB), hdr.Protocol) + offset;
 	pSMB->ParameterOffset = cpu_to_le16(param_offset);
 	pSMB->DataOffset = cpu_to_le16(offset);
 	pSMB->SetupCount = 1;
-- 
2.43.0

[PATCH AUTOSEL 6.11 31/33] tools/rtla: Enhance argument parsing in timerlat_load.py

[Sasha Levin]

From: furkanonder <furkanonder@protonmail.com>

[ Upstream commit bd26818343dc02936a4f2f7b63368d5e1e1773c8 ]

The enhancements made to timerlat_load.py are aimed at improving the clarity of argument parsing.

Summary of Changes:
- The cpu argument is now specified as an integer type in the argument
  parser to enforce input validation, and the construction of affinity_mask
  has been simplified to directly use the integer value of args.cpu.
- The prio argument is similarly updated to be of integer type for
  consistency and validation, eliminating the need for the conversion of
  args.prio to an integer, as this is now handled by the argument parser.

Cc: "jkacur@redhat.com" <jkacur@redhat.com>
Cc: "lgoncalv@redhat.com" <lgoncalv@redhat.com>
Link: https://lore.kernel.org/QfgO7ayKD9dsLk8_ZDebkAV0OF7wla7UmasbP9CBmui_sChOeizy512t3RqCHTjvQoUBUDP8dwEOVCdHQ5KvVNEiP69CynMY94SFDERWl94=@protonmail.com
Signed-off-by: Furkan Onder <furkanonder@protonmail.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/tracing/rtla/sample/timerlat_load.py | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/tools/tracing/rtla/sample/timerlat_load.py b/tools/tracing/rtla/sample/timerlat_load.py
index 8cc5eb2d2e69e..52eccb6225f92 100644
--- a/tools/tracing/rtla/sample/timerlat_load.py
+++ b/tools/tracing/rtla/sample/timerlat_load.py
@@ -25,13 +25,12 @@ import sys
 import os
 
 parser = argparse.ArgumentParser(description='user-space timerlat thread in Python')
-parser.add_argument("cpu", help='CPU to run timerlat thread')
-parser.add_argument("-p", "--prio", help='FIFO priority')
-
+parser.add_argument("cpu", type=int, help='CPU to run timerlat thread')
+parser.add_argument("-p", "--prio", type=int, help='FIFO priority')
 args = parser.parse_args()
 
 try:
-    affinity_mask = { int(args.cpu) }
+    affinity_mask = {args.cpu}
 except:
     print("Invalid cpu: " + args.cpu)
     exit(1)
@@ -44,7 +43,7 @@ except:
 
 if (args.prio):
     try:
-        param = os.sched_param(int(args.prio))
+        param = os.sched_param(args.prio)
         os.sched_setscheduler(0, os.SCHED_FIFO, param)
     except:
         print("Error setting priority")
-- 
2.43.0

[PATCH AUTOSEL 6.11 32/33] verification/dot2: Improve dot parser robustness

[Sasha Levin]

From: Gabriele Monaco <gmonaco@redhat.com>

[ Upstream commit 571f8b3f866a6d990a50fe5c89fe0ea78784d70b ]

This patch makes the dot parser used by dot2c and dot2k slightly more
robust, namely:
* allows parsing files with the gv extension (GraphViz)
* correctly parses edges with any indentation
    * used to work only with a single character (e.g. '\t')
Additionally it fixes a couple of warnings reported by pylint such as
wrong indentation and comparison to False instead of `not ...`

Link: https://lore.kernel.org/20241017064238.41394-2-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/verification/dot2/automata.py | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/tools/verification/dot2/automata.py b/tools/verification/dot2/automata.py
index baffeb960ff0b..bdeb98baa8b06 100644
--- a/tools/verification/dot2/automata.py
+++ b/tools/verification/dot2/automata.py
@@ -29,11 +29,11 @@ class Automata:
 
     def __get_model_name(self):
         basename = ntpath.basename(self.__dot_path)
-        if basename.endswith(".dot") == False:
+        if not basename.endswith(".dot") and not basename.endswith(".gv"):
             print("not a dot file")
             raise Exception("not a dot file: %s" % self.__dot_path)
 
-        model_name = basename[0:-4]
+        model_name = ntpath.splitext(basename)[0]
         if model_name.__len__() == 0:
             raise Exception("not a dot file: %s" % self.__dot_path)
 
@@ -68,9 +68,9 @@ class Automata:
     def __get_cursor_begin_events(self):
         cursor = 0
         while self.__dot_lines[cursor].split()[0] != "{node":
-           cursor += 1
+            cursor += 1
         while self.__dot_lines[cursor].split()[0] == "{node":
-           cursor += 1
+            cursor += 1
         # skip initial state transition
         cursor += 1
         return cursor
@@ -94,11 +94,11 @@ class Automata:
                 initial_state = state[7:]
             else:
                 states.append(state)
-                if self.__dot_lines[cursor].__contains__("doublecircle") == True:
+                if "doublecircle" in self.__dot_lines[cursor]:
                     final_states.append(state)
                     has_final_states = True
 
-                if self.__dot_lines[cursor].__contains__("ellipse") == True:
+                if "ellipse" in self.__dot_lines[cursor]:
                     final_states.append(state)
                     has_final_states = True
 
@@ -110,7 +110,7 @@ class Automata:
         # Insert the initial state at the bein og the states
         states.insert(0, initial_state)
 
-        if has_final_states == False:
+        if not has_final_states:
             final_states.append(initial_state)
 
         return states, initial_state, final_states
@@ -120,7 +120,7 @@ class Automata:
         cursor = self.__get_cursor_begin_events()
 
         events = []
-        while self.__dot_lines[cursor][1] == '"':
+        while self.__dot_lines[cursor].lstrip()[0] == '"':
             # transitions have the format:
             # "all_fired" -> "both_fired" [ label = "disable_irq" ];
             #  ------------ event is here ------------^^^^^
@@ -161,7 +161,7 @@ class Automata:
         # and we are back! Let's fill the matrix
         cursor = self.__get_cursor_begin_events()
 
-        while self.__dot_lines[cursor][1] == '"':
+        while self.__dot_lines[cursor].lstrip()[0] == '"':
             if self.__dot_lines[cursor].split()[1] == "->":
                 line = self.__dot_lines[cursor].split()
                 origin_state = line[0].replace('"','').replace(',','_')
-- 
2.43.0

[PATCH AUTOSEL 6.11 33/33] mailbox: pcc: Check before sending MCTP PCC response ACK

[Sasha Levin]

From: Adam Young <admiyo@os.amperecomputing.com>

[ Upstream commit 7f9e19f207be0c534d517d65e01417ba968cdd34 ]

Type 4 PCC channels have an option to send back a response
to the platform when they are done processing the request.
The flag to indicate whether or not to respond is inside
the message body, and thus is not available to the pcc
mailbox.

If the flag is not set, still set command completion
bit after processing message.

In order to read the flag, this patch maps the shared
buffer to virtual memory. To avoid duplication of mapping
the shared buffer is then made available to be used by
the driver that uses the mailbox.

Signed-off-by: Adam Young <admiyo@os.amperecomputing.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mailbox/pcc.c | 61 +++++++++++++++++++++++++++++++++++++------
 include/acpi/pcc.h    |  7 +++++
 2 files changed, 60 insertions(+), 8 deletions(-)

diff --git a/drivers/mailbox/pcc.c b/drivers/mailbox/pcc.c
index 94885e411085a..82102a4c5d688 100644
--- a/drivers/mailbox/pcc.c
+++ b/drivers/mailbox/pcc.c
@@ -269,6 +269,35 @@ static bool pcc_mbox_cmd_complete_check(struct pcc_chan_info *pchan)
 	return !!val;
 }
 
+static void check_and_ack(struct pcc_chan_info *pchan, struct mbox_chan *chan)
+{
+	struct acpi_pcct_ext_pcc_shared_memory pcc_hdr;
+
+	if (pchan->type != ACPI_PCCT_TYPE_EXT_PCC_SLAVE_SUBSPACE)
+		return;
+	/* If the memory region has not been mapped, we cannot
+	 * determine if we need to send the message, but we still
+	 * need to set the cmd_update flag before returning.
+	 */
+	if (pchan->chan.shmem == NULL) {
+		pcc_chan_reg_read_modify_write(&pchan->cmd_update);
+		return;
+	}
+	memcpy_fromio(&pcc_hdr, pchan->chan.shmem,
+		      sizeof(struct acpi_pcct_ext_pcc_shared_memory));
+	/*
+	 * The PCC slave subspace channel needs to set the command complete bit
+	 * after processing message. If the PCC_ACK_FLAG is set, it should also
+	 * ring the doorbell.
+	 *
+	 * The PCC master subspace channel clears chan_in_use to free channel.
+	 */
+	if (le32_to_cpup(&pcc_hdr.flags) & PCC_ACK_FLAG_MASK)
+		pcc_send_data(chan, NULL);
+	else
+		pcc_chan_reg_read_modify_write(&pchan->cmd_update);
+}
+
 /**
  * pcc_mbox_irq - PCC mailbox interrupt handler
  * @irq:	interrupt number
@@ -306,14 +335,7 @@ static irqreturn_t pcc_mbox_irq(int irq, void *p)
 
 	mbox_chan_received_data(chan, NULL);
 
-	/*
-	 * The PCC slave subspace channel needs to set the command complete bit
-	 * and ring doorbell after processing message.
-	 *
-	 * The PCC master subspace channel clears chan_in_use to free channel.
-	 */
-	if (pchan->type == ACPI_PCCT_TYPE_EXT_PCC_SLAVE_SUBSPACE)
-		pcc_send_data(chan, NULL);
+	check_and_ack(pchan, chan);
 	pchan->chan_in_use = false;
 
 	return IRQ_HANDLED;
@@ -365,14 +387,37 @@ EXPORT_SYMBOL_GPL(pcc_mbox_request_channel);
 void pcc_mbox_free_channel(struct pcc_mbox_chan *pchan)
 {
 	struct mbox_chan *chan = pchan->mchan;
+	struct pcc_chan_info *pchan_info;
+	struct pcc_mbox_chan *pcc_mbox_chan;
 
 	if (!chan || !chan->cl)
 		return;
+	pchan_info = chan->con_priv;
+	pcc_mbox_chan = &pchan_info->chan;
+	if (pcc_mbox_chan->shmem) {
+		iounmap(pcc_mbox_chan->shmem);
+		pcc_mbox_chan->shmem = NULL;
+	}
 
 	mbox_free_channel(chan);
 }
 EXPORT_SYMBOL_GPL(pcc_mbox_free_channel);
 
+int pcc_mbox_ioremap(struct mbox_chan *chan)
+{
+	struct pcc_chan_info *pchan_info;
+	struct pcc_mbox_chan *pcc_mbox_chan;
+
+	if (!chan || !chan->cl)
+		return -1;
+	pchan_info = chan->con_priv;
+	pcc_mbox_chan = &pchan_info->chan;
+	pcc_mbox_chan->shmem = ioremap(pcc_mbox_chan->shmem_base_addr,
+				       pcc_mbox_chan->shmem_size);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pcc_mbox_ioremap);
+
 /**
  * pcc_send_data - Called from Mailbox Controller code. Used
  *		here only to ring the channel doorbell. The PCC client
diff --git a/include/acpi/pcc.h b/include/acpi/pcc.h
index 9b373d172a776..699c1a37b8e78 100644
--- a/include/acpi/pcc.h
+++ b/include/acpi/pcc.h
@@ -12,6 +12,7 @@
 struct pcc_mbox_chan {
 	struct mbox_chan *mchan;
 	u64 shmem_base_addr;
+	void __iomem *shmem;
 	u64 shmem_size;
 	u32 latency;
 	u32 max_access_rate;
@@ -31,11 +32,13 @@ struct pcc_mbox_chan {
 #define PCC_CMD_COMPLETION_NOTIFY	BIT(0)
 
 #define MAX_PCC_SUBSPACES	256
+#define PCC_ACK_FLAG_MASK	0x1
 
 #ifdef CONFIG_PCC
 extern struct pcc_mbox_chan *
 pcc_mbox_request_channel(struct mbox_client *cl, int subspace_id);
 extern void pcc_mbox_free_channel(struct pcc_mbox_chan *chan);
+extern int pcc_mbox_ioremap(struct mbox_chan *chan);
 #else
 static inline struct pcc_mbox_chan *
 pcc_mbox_request_channel(struct mbox_client *cl, int subspace_id)
@@ -43,6 +46,10 @@ pcc_mbox_request_channel(struct mbox_client *cl, int subspace_id)
 	return ERR_PTR(-ENODEV);
 }
 static inline void pcc_mbox_free_channel(struct pcc_mbox_chan *chan) { }
+static inline int pcc_mbox_ioremap(struct mbox_chan *chan)
+{
+	return 0;
+};
 #endif
 
 #endif /* _PCC_H */
-- 
2.43.0