From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: "Bjorn Helgaas" <bhelgaas@google.com>,
linux-pci@vger.kernel.org,
"Michał Winiarski" <michal.winiarski@intel.com>,
"Igor Mammedov" <imammedo@redhat.com>,
linux-kernel@vger.kernel.org
Cc: "Mika Westerberg" <mika.westerberg@linux.intel.com>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH 16/25] PCI: Consolidate assignment loop next round preparation
Date: Mon, 16 Dec 2024 19:56:23 +0200 [thread overview]
Message-ID: <20241216175632.4175-17-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20241216175632.4175-1-ilpo.jarvinen@linux.intel.com>
pci_assign_unassigned_root_bus_resources() and
pci_assign_unassigned_bridge_resources() have a loop that performs a
number rounds to assign resources. The code to prepare for the next
round is identical.
Consolidate the code that prepares for the next assignment round
into pci_prepare_next_assign_round().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/pci/setup-bus.c | 104 ++++++++++++++++------------------------
1 file changed, 42 insertions(+), 62 deletions(-)
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 38dbe8b99910..7e5985543734 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -2135,6 +2135,45 @@ pci_root_bus_distribute_available_resources(struct pci_bus *bus,
}
}
+static void pci_prepare_next_assign_round(struct list_head *fail_head,
+ int tried_times,
+ enum release_type rel_type)
+{
+ struct pci_dev_resource *fail_res;
+
+ pr_info("PCI: No. %d try to assign unassigned res\n", tried_times + 1);
+
+ /*
+ * Try to release leaf bridge's resources that aren't big
+ * enough to contain child device resources.
+ */
+ list_for_each_entry(fail_res, fail_head, list) {
+ pci_bus_release_bridge_resources(fail_res->dev->bus,
+ fail_res->flags & PCI_RES_TYPE_MASK,
+ rel_type);
+ }
+
+ /* Restore size and flags */
+ list_for_each_entry(fail_res, fail_head, list) {
+ struct resource *res = fail_res->res;
+ struct pci_dev *dev = fail_res->dev;
+ int idx = pci_resource_num(dev, res);
+
+ res->start = fail_res->start;
+ res->end = fail_res->end;
+ res->flags = fail_res->flags;
+
+ if (!pci_is_bridge(dev))
+ continue;
+
+ if (idx >= PCI_BRIDGE_RESOURCES &&
+ idx <= PCI_BRIDGE_RESOURCE_END)
+ res->flags = 0;
+ }
+
+ free_list(fail_head);
+}
+
/*
* First try will not touch PCI bridge res.
* Second and later try will clear small leaf bridge res.
@@ -2148,7 +2187,6 @@ void pci_assign_unassigned_root_bus_resources(struct pci_bus *bus)
int tried_times = 0;
enum release_type rel_type = leaf_only;
LIST_HEAD(fail_head);
- struct pci_dev_resource *fail_res;
int pci_try_num = 1;
enum enable_type enable_local;
@@ -2199,40 +2237,11 @@ void pci_assign_unassigned_root_bus_resources(struct pci_bus *bus)
break;
}
- dev_info(&bus->dev, "No. %d try to assign unassigned res\n",
- tried_times + 1);
-
/* Third times and later will not check if it is leaf */
if (tried_times + 1 > 2)
rel_type = whole_subtree;
- /*
- * Try to release leaf bridge's resources that doesn't fit
- * resource of child device under that bridge.
- */
- list_for_each_entry(fail_res, &fail_head, list) {
- pci_bus_release_bridge_resources(fail_res->dev->bus,
- fail_res->flags & PCI_RES_TYPE_MASK,
- rel_type);
- }
-
- /* Restore size and flags */
- list_for_each_entry(fail_res, &fail_head, list) {
- struct resource *res = fail_res->res;
- int idx;
-
- res->start = fail_res->start;
- res->end = fail_res->end;
- res->flags = fail_res->flags;
-
- if (pci_is_bridge(fail_res->dev)) {
- idx = pci_resource_num(fail_res->dev, res);
- if (idx >= PCI_BRIDGE_RESOURCES &&
- idx <= PCI_BRIDGE_RESOURCE_END)
- res->flags = 0;
- }
- }
- free_list(&fail_head);
+ pci_prepare_next_assign_round(&fail_head, tried_times, rel_type);
}
pci_bus_dump_resources(bus);
@@ -2258,7 +2267,6 @@ void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
LIST_HEAD(add_list);
int tried_times = 0;
LIST_HEAD(fail_head);
- struct pci_dev_resource *fail_res;
int ret;
while (1) {
@@ -2284,36 +2292,8 @@ void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
break;
}
- printk(KERN_DEBUG "PCI: No. %d try to assign unassigned res\n",
- tried_times + 1);
-
- /*
- * Try to release leaf bridge's resources that aren't big
- * enough to contain child device resources.
- */
- list_for_each_entry(fail_res, &fail_head, list) {
- pci_bus_release_bridge_resources(fail_res->dev->bus,
- fail_res->flags & PCI_RES_TYPE_MASK,
- whole_subtree);
- }
-
- /* Restore size and flags */
- list_for_each_entry(fail_res, &fail_head, list) {
- struct resource *res = fail_res->res;
- int idx;
-
- res->start = fail_res->start;
- res->end = fail_res->end;
- res->flags = fail_res->flags;
-
- if (pci_is_bridge(fail_res->dev)) {
- idx = pci_resource_num(fail_res->dev, res);
- if (idx >= PCI_BRIDGE_RESOURCES &&
- idx <= PCI_BRIDGE_RESOURCE_END)
- res->flags = 0;
- }
- }
- free_list(&fail_head);
+ pci_prepare_next_assign_round(&fail_head, tried_times,
+ whole_subtree);
}
ret = pci_reenable_device(bridge);
--
2.39.5
next prev parent reply other threads:[~2024-12-16 17:58 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-16 17:56 [PATCH 00/25] PCI: Resource fitting/assignment fixes and cleanups Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 01/25] PCI: Remove add_align overwrite unrelated to size0 Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 02/25] PCI: size0 is unrelated to add_align Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 03/25] PCI: Simplify size1 assignment logic Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 04/25] PCI: Optional bridge window size too may need relaxing Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 05/25] PCI: Fix old_size lower bound in calculate_iosize() too Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 06/25] PCI: Use SZ_* instead of literals in setup-bus.c Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 07/25] PCI: resource_set_range/size() conversions Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 08/25] PCI: Add a helper to identify IOV resources Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 09/25] PCI: Check resource_size() separately Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 10/25] PCI: Add pci_resource_num() helper Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 11/25] PCI: Add dev & res local variables to resource assignment funcs Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 12/25] PCI: Converge return paths in __assign_resources_sorted() Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 13/25] PCI: Refactor pdev_sort_resources() & __dev_sort_resources() Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 14/25] PCI: Use while loop and break instead of gotos Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 15/25] PCI: Rename retval to ret Ilpo Järvinen
2024-12-16 17:56 ` Ilpo Järvinen [this message]
2024-12-16 17:56 ` [PATCH 17/25] PCI: Remove wrong comment from pci_reassign_resource() Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 18/25] PCI: Add restore_dev_resource() Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 19/25] PCI: Extend enable to check for any optional resource Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 20/25] PCI: Always have realloc_head in __assign_resources_sorted() Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 21/25] PCI: Indicate optional resource assignment failures Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 22/25] PCI: Add debug print when releasing resources before retry Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 23/25] PCI: Use res->parent to check is resource is assigned Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 24/25] PCI: Perform reset_resource() and build fail list in sync Ilpo Järvinen
2025-04-01 2:35 ` Guenter Roeck
2025-04-01 10:18 ` Ilpo Järvinen
2025-04-01 12:07 ` Ilpo Järvinen
2025-04-01 14:15 ` Guenter Roeck
2025-04-01 17:38 ` Ilpo Järvinen
2025-04-11 19:37 ` Ondřej Jirman
2025-04-14 9:52 ` Ilpo Järvinen
2025-04-14 12:19 ` Ondřej Jirman
2025-04-14 13:15 ` Ilpo Järvinen
2025-04-14 13:43 ` Ondřej Jirman
2025-04-14 13:52 ` Ilpo Järvinen
2025-04-01 13:28 ` Guenter Roeck
2025-05-06 15:03 ` Tudor Ambarus
2025-05-06 15:53 ` Ilpo Järvinen
2025-05-28 11:22 ` Tudor Ambarus
2025-05-28 11:39 ` Tudor Ambarus
2025-05-28 13:09 ` Tudor Ambarus
2025-05-30 6:55 ` Ilpo Järvinen
2025-05-30 6:38 ` Ilpo Järvinen
2025-05-30 14:48 ` Ilpo Järvinen
2025-06-02 14:40 ` Tudor Ambarus
2025-06-02 15:08 ` Ilpo Järvinen
2025-06-02 18:42 ` Tudor Ambarus
2025-06-03 8:13 ` Ilpo Järvinen
2025-06-03 10:36 ` Tudor Ambarus
2025-06-03 10:48 ` Tudor Ambarus
2025-06-03 11:43 ` Tudor Ambarus
2025-06-03 14:23 ` Ilpo Järvinen
2025-06-03 14:43 ` Ilpo Järvinen
2025-06-03 14:13 ` Ilpo Järvinen
2025-06-03 15:25 ` Tudor Ambarus
2025-06-03 17:03 ` Ilpo Järvinen
2025-06-03 17:09 ` Ilpo Järvinen
2025-06-02 12:32 ` Tudor Ambarus
2025-06-19 0:30 ` D Scott Phillips
2025-06-24 12:48 ` Ilpo Järvinen
2025-06-25 17:45 ` Ilpo Järvinen
2025-06-25 20:33 ` D Scott Phillips
2025-06-26 9:22 ` Ilpo Järvinen
2025-06-26 14:53 ` D Scott Phillips
2024-12-16 17:56 ` [PATCH 25/25] PCI: Rework optional resource handling Ilpo Järvinen
2025-02-13 21:46 ` [PATCH 00/25] PCI: Resource fitting/assignment fixes and cleanups Bjorn Helgaas
2025-02-14 8:18 ` Xiaochun XC17 Li | 李小春 Xavier
2025-02-14 11:53 ` Ilpo Järvinen
2025-02-14 21:28 ` Bjorn Helgaas
2025-02-14 9:59 ` Xiaochun Lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241216175632.4175-17-ilpo.jarvinen@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=bhelgaas@google.com \
--cc=imammedo@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=michal.winiarski@intel.com \
--cc=mika.westerberg@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®