From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: "Bjorn Helgaas" <bhelgaas@google.com>,
linux-pci@vger.kernel.org,
"Michał Winiarski" <michal.winiarski@intel.com>,
"Igor Mammedov" <imammedo@redhat.com>,
linux-kernel@vger.kernel.org
Cc: "Mika Westerberg" <mika.westerberg@linux.intel.com>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH 07/25] PCI: resource_set_range/size() conversions
Date: Mon, 16 Dec 2024 19:56:14 +0200 [thread overview]
Message-ID: <20241216175632.4175-8-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20241216175632.4175-1-ilpo.jarvinen@linux.intel.com>
A few sites that could use resource_set_range/size() in setup-bus.c
were not picked up earlier due to them no matching the usual pattern.
Convert them now.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/pci/setup-bus.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 303c4fbf2d14..dd9b06947621 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -413,10 +413,8 @@ static void __assign_resources_sorted(struct list_head *head,
* consistent.
*/
if (add_align > dev_res->res->start) {
- resource_size_t r_size = resource_size(dev_res->res);
-
- dev_res->res->start = add_align;
- dev_res->res->end = add_align + r_size - 1;
+ resource_set_range(dev_res->res, add_align,
+ resource_size(dev_res->res));
list_for_each_entry(dev_res2, head, list) {
align = pci_resource_alignment(dev_res2->dev,
@@ -1100,7 +1098,7 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
if (realloc_head && i >= PCI_IOV_RESOURCES &&
i <= PCI_IOV_RESOURCE_END) {
add_align = max(pci_resource_alignment(dev, r), add_align);
- r->end = r->start - 1;
+ resource_set_size(r, 0);
add_to_list(realloc_head, dev, r, r_size, 0 /* Don't care */);
children_add_size += r_size;
continue;
@@ -1180,8 +1178,8 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
b_res->flags = 0;
return 0;
}
- b_res->start = min_align;
- b_res->end = size0 + min_align - 1;
+
+ resource_set_range(b_res, min_align, size0);
b_res->flags |= IORESOURCE_STARTALIGN;
if (bus->self && size1 > size0 && realloc_head) {
add_to_list(realloc_head, bus->self, b_res, size1-size0, add_align);
@@ -1656,8 +1654,7 @@ static void pci_bridge_release_resources(struct pci_bus *bus,
pci_info(dev, "resource %d %pR released\n",
PCI_BRIDGE_RESOURCES + idx, r);
/* Keep the old size */
- r->end = resource_size(r) - 1;
- r->start = 0;
+ resource_set_range(r, 0, resource_size(r));
r->flags = 0;
/* Avoiding touch the one without PREF */
--
2.39.5
next prev parent reply other threads:[~2024-12-16 17:57 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-16 17:56 [PATCH 00/25] PCI: Resource fitting/assignment fixes and cleanups Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 01/25] PCI: Remove add_align overwrite unrelated to size0 Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 02/25] PCI: size0 is unrelated to add_align Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 03/25] PCI: Simplify size1 assignment logic Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 04/25] PCI: Optional bridge window size too may need relaxing Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 05/25] PCI: Fix old_size lower bound in calculate_iosize() too Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 06/25] PCI: Use SZ_* instead of literals in setup-bus.c Ilpo Järvinen
2024-12-16 17:56 ` Ilpo Järvinen [this message]
2024-12-16 17:56 ` [PATCH 08/25] PCI: Add a helper to identify IOV resources Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 09/25] PCI: Check resource_size() separately Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 10/25] PCI: Add pci_resource_num() helper Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 11/25] PCI: Add dev & res local variables to resource assignment funcs Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 12/25] PCI: Converge return paths in __assign_resources_sorted() Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 13/25] PCI: Refactor pdev_sort_resources() & __dev_sort_resources() Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 14/25] PCI: Use while loop and break instead of gotos Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 15/25] PCI: Rename retval to ret Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 16/25] PCI: Consolidate assignment loop next round preparation Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 17/25] PCI: Remove wrong comment from pci_reassign_resource() Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 18/25] PCI: Add restore_dev_resource() Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 19/25] PCI: Extend enable to check for any optional resource Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 20/25] PCI: Always have realloc_head in __assign_resources_sorted() Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 21/25] PCI: Indicate optional resource assignment failures Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 22/25] PCI: Add debug print when releasing resources before retry Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 23/25] PCI: Use res->parent to check is resource is assigned Ilpo Järvinen
2024-12-16 17:56 ` [PATCH 24/25] PCI: Perform reset_resource() and build fail list in sync Ilpo Järvinen
2025-04-01 2:35 ` Guenter Roeck
2025-04-01 10:18 ` Ilpo Järvinen
2025-04-01 12:07 ` Ilpo Järvinen
2025-04-01 14:15 ` Guenter Roeck
2025-04-01 17:38 ` Ilpo Järvinen
2025-04-11 19:37 ` Ondřej Jirman
2025-04-14 9:52 ` Ilpo Järvinen
2025-04-14 12:19 ` Ondřej Jirman
2025-04-14 13:15 ` Ilpo Järvinen
2025-04-14 13:43 ` Ondřej Jirman
2025-04-14 13:52 ` Ilpo Järvinen
2025-04-01 13:28 ` Guenter Roeck
2025-05-06 15:03 ` Tudor Ambarus
2025-05-06 15:53 ` Ilpo Järvinen
2025-05-28 11:22 ` Tudor Ambarus
2025-05-28 11:39 ` Tudor Ambarus
2025-05-28 13:09 ` Tudor Ambarus
2025-05-30 6:55 ` Ilpo Järvinen
2025-05-30 6:38 ` Ilpo Järvinen
2025-05-30 14:48 ` Ilpo Järvinen
2025-06-02 14:40 ` Tudor Ambarus
2025-06-02 15:08 ` Ilpo Järvinen
2025-06-02 18:42 ` Tudor Ambarus
2025-06-03 8:13 ` Ilpo Järvinen
2025-06-03 10:36 ` Tudor Ambarus
2025-06-03 10:48 ` Tudor Ambarus
2025-06-03 11:43 ` Tudor Ambarus
2025-06-03 14:23 ` Ilpo Järvinen
2025-06-03 14:43 ` Ilpo Järvinen
2025-06-03 14:13 ` Ilpo Järvinen
2025-06-03 15:25 ` Tudor Ambarus
2025-06-03 17:03 ` Ilpo Järvinen
2025-06-03 17:09 ` Ilpo Järvinen
2025-06-02 12:32 ` Tudor Ambarus
2025-06-19 0:30 ` D Scott Phillips
2025-06-24 12:48 ` Ilpo Järvinen
2025-06-25 17:45 ` Ilpo Järvinen
2025-06-25 20:33 ` D Scott Phillips
2025-06-26 9:22 ` Ilpo Järvinen
2025-06-26 14:53 ` D Scott Phillips
2024-12-16 17:56 ` [PATCH 25/25] PCI: Rework optional resource handling Ilpo Järvinen
2025-02-13 21:46 ` [PATCH 00/25] PCI: Resource fitting/assignment fixes and cleanups Bjorn Helgaas
2025-02-14 8:18 ` Xiaochun XC17 Li | 李小春 Xavier
2025-02-14 11:53 ` Ilpo Järvinen
2025-02-14 21:28 ` Bjorn Helgaas
2025-02-14 9:59 ` Xiaochun Lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241216175632.4175-8-ilpo.jarvinen@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=bhelgaas@google.com \
--cc=imammedo@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=michal.winiarski@intel.com \
--cc=mika.westerberg@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®