mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Siddharth Vadapalli <s-vadapalli@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
	<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <srk@ti.com>,
	<s-vadapalli@ti.com>
Subject: [PATCH 1/3] arm64: dts: ti: k3-j721e-evm: Add overlay for PCIe NTB functionality
Date: Sun, 2 Feb 2025 15:06:28 +0530	[thread overview]
Message-ID: <20250202093636.2699064-2-s-vadapalli@ti.com> (raw)
In-Reply-To: <20250202093636.2699064-1-s-vadapalli@ti.com>

PCIe NTB (Non-Transparent-Bridge) allows connecting the memory of
multiple PCIe Hosts (Root-Complex). The number of such hosts is
determined by the number of PCIe instances configured for NTB operation
on the device which intends to enable NTB functionality. Add a device-tree
overlay to configure PCIE0 and PCIE1 instances of PCIe on J721E EVM for NTB
operation. This shall allow connecting the memory of two PCIe Hosts via
PCIE0 and PCIE1 on J721E EVM.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
 arch/arm64/boot/dts/ti/Makefile               |  4 +
 .../boot/dts/ti/k3-j721e-evm-pcie-ntb.dtso    | 91 +++++++++++++++++++
 2 files changed, 95 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-evm-pcie-ntb.dtso

diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 8a4bdf87e2d4..1097ab30f5a9 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -102,6 +102,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721e-beagleboneai64.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board-infotainment.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-gesi-exp-board.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-pcie-ntb.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-pcie0-ep.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-pcie1-ep.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb
@@ -201,6 +202,8 @@ k3-j7200-evm-pcie1-ep-dtbs := k3-j7200-common-proc-board.dtb \
 	k3-j7200-evm-pcie1-ep.dtbo
 k3-j721e-common-proc-board-infotainment-dtbs := k3-j721e-common-proc-board.dtb \
 	k3-j721e-common-proc-board-infotainment.dtbo
+k3-j721e-evm-pcie-ntb-dtbs := k3-j721e-common-proc-board.dtb \
+	k3-j721e-evm-pcie-ntb.dtbo
 k3-j721e-evm-pcie0-ep-dtbs := k3-j721e-common-proc-board.dtb \
 	k3-j721e-evm-pcie0-ep.dtbo
 k3-j721e-evm-pcie1-ep-dtbs := k3-j721e-common-proc-board.dtb \
@@ -239,6 +242,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
 	k3-am69-sk-pcie0-ep.dtb \
 	k3-j7200-evm-pcie1-ep.dtb \
 	k3-j721e-common-proc-board-infotainment.dtb \
+	k3-j721e-evm-pcie-ntb.dtb \
 	k3-j721e-evm-pcie0-ep.dtb \
 	k3-j721e-evm-pcie1-ep.dtb \
 	k3-j721e-sk-csi2-dual-imx219.dtb \
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie-ntb.dtso b/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie-ntb.dtso
new file mode 100644
index 000000000000..4601bc8cd52f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie-ntb.dtso
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT Overlay for enabling NTB functionality using PCIE0 and PCIE1 instances of
+ * PCIe on the J7 common processor board.
+ *
+ * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+#include "k3-pinctrl.h"
+
+&{/} {
+	epf_bus {
+		compatible = "pci-epf-bus";
+
+		ntb {
+			compatible = "pci-epf-ntb";
+			epcs = <&pcie0_ep>, <&pcie1_ep>;
+			epc-names = "primary", "secondary";
+			vendor-id = /bits/ 16 <0x104c>;
+			device-id = /bits/ 16 <0xb00d>;
+			num-mws = <4>;
+			mws-size = <0x100000>, <0x100000>, <0x100000>, <0x100000>;
+		};
+	};
+};
+
+&pcie0_rc {
+	status = "disabled";
+};
+
+&pcie1_rc {
+	status = "disabled";
+};
+
+&cbass_main {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic500>;
+
+	pcie0_ep: pcie-ep@2900000 {
+		compatible = "ti,j721e-pcie-ep";
+		reg = <0x00 0x02900000 0x00 0x1000>,
+		      <0x00 0x02907000 0x00 0x400>,
+		      <0x00 0x0d000000 0x00 0x00800000>,
+		      <0x00 0x10000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
+		max-link-speed = <3>;
+		num-lanes = <1>;
+		power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 239 1>;
+		clock-names = "fck";
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+		dma-coherent;
+		phys = <&serdes0_pcie_link>;
+		phy-names = "pcie-phy";
+		ti,syscon-pcie-ctrl = <&scm_conf 0x4070>;
+	};
+
+	pcie1_ep: pcie-ep@2910000 {
+		compatible = "ti,j721e-pcie-ep";
+		reg = <0x00 0x02910000 0x00 0x1000>,
+		      <0x00 0x02917000 0x00 0x400>,
+		      <0x00 0x0d800000 0x00 0x00800000>,
+		      <0x00 0x18000000 0x00 0x08000000>;
+		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+		interrupt-names = "link_state";
+		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+		max-link-speed = <3>;
+		num-lanes = <2>;
+		power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 240 1>;
+		clock-names = "fck";
+		max-functions = /bits/ 8 <6>;
+		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
+		dma-coherent;
+		phys = <&serdes1_pcie_link>;
+		phy-names = "pcie-phy";
+		ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
+	};
+};
-- 
2.43.0


  reply	other threads:[~2025-02-02  9:37 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-02  9:36 [PATCH 0/3] PCIe NTB and USB Overlays for J721E, J742S2 and J784S4 Siddharth Vadapalli
2025-02-02  9:36 ` Siddharth Vadapalli [this message]
2025-02-02  9:36 ` [PATCH 2/3] arm64: dts: ti: k3-j784s4-j742s2-evm: Add overlay for PCIe NTB Siddharth Vadapalli
2025-02-24 12:05   ` Vignesh Raghavendra
2025-02-24 12:11     ` Siddharth Vadapalli
2025-02-02  9:36 ` [PATCH 3/3] arm64: dts: ti: k3-j784s4-j742s2-evm: Add overlay to enable USB0 Type-A Siddharth Vadapalli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250202093636.2699064-2-s-vadapalli@ti.com \
    --to=s-vadapalli@ti.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kristo@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh@kernel.org \
    --cc=srk@ti.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®