From: Siddharth Vadapalli <s-vadapalli@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <srk@ti.com>,
<s-vadapalli@ti.com>
Subject: [PATCH 3/3] arm64: dts: ti: k3-j784s4-j742s2-evm: Add overlay to enable USB0 Type-A
Date: Sun, 2 Feb 2025 15:06:30 +0530 [thread overview]
Message-ID: <20250202093636.2699064-4-s-vadapalli@ti.com> (raw)
In-Reply-To: <20250202093636.2699064-1-s-vadapalli@ti.com>
The USB0 instance of the USB controller on both the J742S2 EVM and the
J784S4 EVM supports a single USB interface at a time among the following:
1. USB3.1 Gen1 Type C interface
2. Two USB2.0 Type A interfaces via an on-board USB Hub.
By default, the USB3.1 Gen1 Type C interface is supported on both of the
EVMs. Enable the USB2.0 Type A interface by configuring the USB2.0_MUX_SEL
mux. Additionally, set the Dual-Role Mode to Host since a Type-A interface
is only associated with the Host Mode of operation.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
arch/arm64/boot/dts/ti/Makefile | 9 +++++-
.../ti/k3-j784s4-j742s2-evm-usb0-type-a.dtso | 29 +++++++++++++++++++
2 files changed, 37 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-usb0-type-a.dtso
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index dbeb5d7401f7..019517c258ec 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -129,6 +129,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-pcie0-pcie1-ep.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-quad-port-eth-exp1.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-usxgmii-exp1-exp2.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-j784s4-j742s2-evm-pcie-ntb.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j784s4-j742s2-evm-usb0-type-a.dtbo
# Boards with J742S2 SoC
dtb-$(CONFIG_ARCH_K3) += k3-j742s2-evm.dtb
@@ -215,6 +216,8 @@ k3-j721s2-evm-pcie1-ep-dtbs := k3-j721s2-common-proc-board.dtb \
k3-j721s2-evm-pcie1-ep.dtbo
k3-j742s2-evm-pcie-ntb-dtbs := k3-j742s2-evm.dtb \
k3-j784s4-j742s2-evm-pcie-ntb.dtbo
+k3-j742s2-evm-usb0-type-a-dtbs := k3-j742s2-evm.dtb \
+ k3-j784s4-j742s2-evm-usb0-type-a.dtbo
k3-j784s4-evm-pcie-ntb-dtbs := k3-j784s4-evm.dtb \
k3-j784s4-j742s2-evm-pcie-ntb.dtbo
k3-j784s4-evm-pcie0-pcie1-ep-dtbs := k3-j784s4-evm.dtb \
@@ -223,6 +226,8 @@ k3-j784s4-evm-quad-port-eth-exp1-dtbs := k3-j784s4-evm.dtb \
k3-j784s4-evm-quad-port-eth-exp1.dtbo
k3-j784s4-evm-usxgmii-exp1-exp2-dtbs := k3-j784s4-evm.dtb \
k3-j784s4-evm-usxgmii-exp1-exp2.dtbo
+k3-j784s4-evm-usb0-type-a-dtbs := k3-j784s4-evm.dtb \
+ k3-j784s4-j742s2-evm-usb0-type-a.dtbo
dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
k3-am625-beagleplay-csi2-tevi-ov5640.dtb \
k3-am625-sk-csi2-imx219.dtb \
@@ -253,10 +258,12 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
k3-j721e-sk-csi2-dual-imx219.dtb \
k3-j721s2-evm-pcie1-ep.dtb \
k3-j742s2-evm-pcie-ntb.dtb \
+ k3-j742s2-evm-usb0-type-a.dtb \
k3-j784s4-evm-pcie-ntb.dtb \
k3-j784s4-evm-pcie0-pcie1-ep.dtb \
k3-j784s4-evm-quad-port-eth-exp1.dtb \
- k3-j784s4-evm-usxgmii-exp1-exp2.dtb
+ k3-j784s4-evm-usxgmii-exp1-exp2.dtb \
+ k3-j784s4-evm-usb0-type-a.dtb
# Enable support for device-tree overlays
DTC_FLAGS_k3-am625-beagleplay += -@
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-usb0-type-a.dtso b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-usb0-type-a.dtso
new file mode 100644
index 000000000000..ba15d72d86d6
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-usb0-type-a.dtso
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT Overlay for enabling USB0 instance of USB on J784S4 and J742S2 EVMs for
+ * Host Mode of operation with the Type-A Connector.
+ *
+ * J784S4 EVM Product Link: https://www.ti.com/tool/J784S4XEVM
+ * J742S2 EVM Product Link: https://www.ti.com/tool/J742S2XH01EVM
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&exp2 {
+ p12-hog {
+ /* P12 - USB2.0_MUX_SEL */
+ gpio-hog;
+ gpios = <12 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "USB2.0_MUX_SEL";
+ };
+};
+
+&usb0 {
+ dr_mode = "host";
+};
--
2.43.0
prev parent reply other threads:[~2025-02-02 9:37 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-02 9:36 [PATCH 0/3] PCIe NTB and USB Overlays for J721E, J742S2 and J784S4 Siddharth Vadapalli
2025-02-02 9:36 ` [PATCH 1/3] arm64: dts: ti: k3-j721e-evm: Add overlay for PCIe NTB functionality Siddharth Vadapalli
2025-02-02 9:36 ` [PATCH 2/3] arm64: dts: ti: k3-j784s4-j742s2-evm: Add overlay for PCIe NTB Siddharth Vadapalli
2025-02-24 12:05 ` Vignesh Raghavendra
2025-02-24 12:11 ` Siddharth Vadapalli
2025-02-02 9:36 ` Siddharth Vadapalli [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250202093636.2699064-4-s-vadapalli@ti.com \
--to=s-vadapalli@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=srk@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®