Re: [PATCH] qcom: llcc/edac: Correct interrupt enable register configuration

[Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>]

On Tue, Nov 19, 2024 at 12:16:08PM +0530, Komal Bajaj wrote:
> The previous implementation incorrectly configured the cmn_interrupt_2_enable
> register for interrupt handling. Using cmn_interrupt_2_enable to configure Tag,
> Data RAM ECC interrupts would lead to issues like double handling of the
> interrupts (EL1 and EL3) as cmn_interrupt_2_enable is meant to be configured
> for interrupts which needs to be handled by EL3.
> 
> EL1 LLCC EDAC driver needs to use cmn_interrupt_0_enable register to
> configure Tag, Data RAM ECC interrupts instead of cmn_interrupt_2_enable.
> 

Cc: stable@vger.kernel.org

> Fixes: 27450653f1db ("drivers: edac: Add EDAC driver support for QCOM SoCs")
> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

- Mani

> ---
>  drivers/edac/qcom_edac.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/edac/qcom_edac.c b/drivers/edac/qcom_edac.c
> index a9a8ba067007..0fd7a777fe7d 100644
> --- a/drivers/edac/qcom_edac.c
> +++ b/drivers/edac/qcom_edac.c
> @@ -95,7 +95,7 @@ static int qcom_llcc_core_setup(struct llcc_drv_data *drv, struct regmap *llcc_b
>  	 * Configure interrupt enable registers such that Tag, Data RAM related
>  	 * interrupts are propagated to interrupt controller for servicing
>  	 */
> -	ret = regmap_update_bits(llcc_bcast_regmap, drv->edac_reg_offset->cmn_interrupt_2_enable,
> +	ret = regmap_update_bits(llcc_bcast_regmap, drv->edac_reg_offset->cmn_interrupt_0_enable,
>  				 TRP0_INTERRUPT_ENABLE,
>  				 TRP0_INTERRUPT_ENABLE);
>  	if (ret)
> @@ -113,7 +113,7 @@ static int qcom_llcc_core_setup(struct llcc_drv_data *drv, struct regmap *llcc_b
>  	if (ret)
>  		return ret;
> 
> -	ret = regmap_update_bits(llcc_bcast_regmap, drv->edac_reg_offset->cmn_interrupt_2_enable,
> +	ret = regmap_update_bits(llcc_bcast_regmap, drv->edac_reg_offset->cmn_interrupt_0_enable,
>  				 DRP0_INTERRUPT_ENABLE,
>  				 DRP0_INTERRUPT_ENABLE);
>  	if (ret)
> --
> 2.46.0
> 

-- 
மணிவண்ணன் சதாசிவம்