mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH v2 00/15] media: rcar: Streams support
@ 2025-03-26 11:09 Tomi Valkeinen
  2025-03-26 11:09 ` [PATCH v2 01/15] media: rcar-csi2: Use the pad version of v4l2_get_link_freq() Tomi Valkeinen
                   ` (14 more replies)
  0 siblings, 15 replies; 16+ messages in thread
From: Tomi Valkeinen @ 2025-03-26 11:09 UTC (permalink / raw)
  To: Niklas Söderlund, Mauro Carvalho Chehab, Sakari Ailus
  Cc: linux-media, linux-renesas-soc, linux-kernel,
	Niklas Söderlund, Mauro Carvalho Chehab, Laurent Pinchart,
	Jacopo Mondi, Tomi Valkeinen

Add streams support to Renesas rcar platform driver.

The series attempts to keep compatibility with the current upstream.
However, in upstream there's some kind of custom multi-stream support
implemented to the rcar driver, which breaks at patch "media: rcar-csi2:
Simplify rcsi2_calc_mbps()".

The behavior should not change when using a single stream.

Testing is problematic, as the only way currently for me to get multiple
streams is by using the GMSL2 deserializer add-on board with GMSL2
serializers. These are not supported in upstream. If someone has the
hardware and wants to test, I can share the very-WIP branch that
contains the missing pieces.

 Tomi

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
---
Changes in v2:
- Rebased on top of latest upstream, and updated the dependencies to
  match the latest serieses sent.
- Add new patch "media: rcar-csi2: Use the pad version of v4l2_get_link_freq()"
- Drop "media: rcar-csi2: Fix typo" (it was not a typo)
- Update the code in calc_mbps(). The previous method relied on
  V4L2_CID_LINK_FREQ, but that's not available if the link-freq is
  provided via get_mbus_config().
- Dropped dependencies to Niklas' old series which doesn't apply
  cleanly. It's needed for multi-stream, but not for the current
  upstream which only has a single stream use case.
- Link to v1: https://lore.kernel.org/r/20250219-rcar-streams-v1-0-f1b93e370aab@ideasonboard.com

---
Tomi Valkeinen (15):
      media: rcar-csi2: Use the pad version of v4l2_get_link_freq()
      media: rcar-isp: Improve ISPPROCMODE_DT_PROC_MODE_VC
      media: rcar-isp: Move {enable|disable}_streams() calls
      media: rcar-csi2: Move {enable|disable}_streams() calls
      media: rcar-csi2: Move rcar2_calc_mbps()
      media: rcar-csi2: Simplify rcsi2_calc_mbps()
      media: rcar-csi2: Optimize rcsi2_calc_mbps()
      media: rcar-csi2: Switch to Streams API
      media: rcar-isp: Switch to Streams API
      media: rcar-csi2: Add .get_frame_desc op
      media: rcar-isp: Call get_frame_desc to find out VC & DT
      media: rcar-csi2: Add more stream support to rcsi2_calc_mbps()
      media: rcar-csi2: Call get_frame_desc to find out VC & DT (Gen3)
      media: rcar-csi2: Add full streams support
      media: rcar-isp: Add full streams support

 drivers/media/platform/renesas/rcar-csi2.c | 426 ++++++++++++++++++++---------
 drivers/media/platform/renesas/rcar-isp.c  | 228 +++++++++++----
 2 files changed, 479 insertions(+), 175 deletions(-)
---
base-commit: f2151613e040973c868d28c8b00885dfab69eb75
change-id: 20250219-rcar-streams-1fdea8860e5e
prerequisite-message-id: <20250210175615.1686529-1-niklas.soderlund+renesas@ragnatech.se>
prerequisite-patch-id: a4aa6a184c6a21fc4536c11e14d9b5cc61f13346
prerequisite-patch-id: 1b0091875529d392b142814005baa38b2ef77f98
prerequisite-patch-id: 4c960ae93b1e663b11194903ed1810e0ed1e4f59
prerequisite-patch-id: a5641e1dcad0f39baef8996b6731a471046f18f9
prerequisite-patch-id: 481317ba4b987cbb069c31f3372686a59c0fcb67
prerequisite-change-id: 20250324-rcar-fix-raw-c7967ff85d3e:v1
prerequisite-patch-id: b21819aa41855942f3474ff8135daccc9c7c652d
prerequisite-patch-id: af375b9da2a977ea10d1fee2d500de5a2dbe53dd
prerequisite-patch-id: 2278b5cd1de5008ef35f9c9f34e3a53bb98147da
prerequisite-change-id: 20250218-frame-desc-passthrough-66805e413974:v4
prerequisite-patch-id: bce4a915a29a64f88ed1bb600c08df37d2ba20c6
prerequisite-patch-id: 69b75e7dad9ced905cb39a72f18bebbf3e8f998a
prerequisite-patch-id: 58463f6944c76acd6cf203b14a2836cdb0db2461

Best regards,
-- 
Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v2 01/15] media: rcar-csi2: Use the pad version of v4l2_get_link_freq()
  2025-03-26 11:09 [PATCH v2 00/15] media: rcar: Streams support Tomi Valkeinen
@ 2025-03-26 11:09 ` Tomi Valkeinen
  2025-03-26 11:09 ` [PATCH v2 02/15] media: rcar-isp: Improve ISPPROCMODE_DT_PROC_MODE_VC Tomi Valkeinen
                   ` (13 subsequent siblings)
  14 siblings, 0 replies; 16+ messages in thread
From: Tomi Valkeinen @ 2025-03-26 11:09 UTC (permalink / raw)
  To: Niklas Söderlund, Mauro Carvalho Chehab, Sakari Ailus
  Cc: linux-media, linux-renesas-soc, linux-kernel,
	Niklas Söderlund, Mauro Carvalho Chehab, Laurent Pinchart,
	Jacopo Mondi, Tomi Valkeinen

Use the new version of v4l2_get_link_freq() which supports media_pad as
a parameter.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
---
 drivers/media/platform/renesas/rcar-csi2.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/renesas/rcar-csi2.c b/drivers/media/platform/renesas/rcar-csi2.c
index 9979de4f6ef1..ddbdde23c122 100644
--- a/drivers/media/platform/renesas/rcar-csi2.c
+++ b/drivers/media/platform/renesas/rcar-csi2.c
@@ -954,6 +954,7 @@ static int rcsi2_set_phypll(struct rcar_csi2 *priv, unsigned int mbps)
 static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp,
 			   unsigned int lanes)
 {
+	struct media_pad *remote_pad;
 	struct v4l2_subdev *source;
 	s64 freq;
 	u64 mbps;
@@ -962,8 +963,9 @@ static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp,
 		return -ENODEV;
 
 	source = priv->remote;
+	remote_pad = &source->entity.pads[priv->remote_pad];
 
-	freq = v4l2_get_link_freq(source->ctrl_handler, bpp, 2 * lanes);
+	freq = v4l2_get_link_freq(remote_pad, bpp, 2 * lanes);
 	if (freq < 0) {
 		int ret = (int)freq;
 

-- 
2.43.0


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v2 02/15] media: rcar-isp: Improve ISPPROCMODE_DT_PROC_MODE_VC
  2025-03-26 11:09 [PATCH v2 00/15] media: rcar: Streams support Tomi Valkeinen
  2025-03-26 11:09 ` [PATCH v2 01/15] media: rcar-csi2: Use the pad version of v4l2_get_link_freq() Tomi Valkeinen
@ 2025-03-26 11:09 ` Tomi Valkeinen
  2025-03-26 11:09 ` [PATCH v2 03/15] media: rcar-isp: Move {enable|disable}_streams() calls Tomi Valkeinen
                   ` (12 subsequent siblings)
  14 siblings, 0 replies; 16+ messages in thread
From: Tomi Valkeinen @ 2025-03-26 11:09 UTC (permalink / raw)
  To: Niklas Söderlund, Mauro Carvalho Chehab, Sakari Ailus
  Cc: linux-media, linux-renesas-soc, linux-kernel,
	Niklas Söderlund, Mauro Carvalho Chehab, Laurent Pinchart,
	Jacopo Mondi, Tomi Valkeinen

Instead of having four macros for ISPPROCMODE_DT_PROC_MODE_VC[0123](pm),
have just one ISPPROCMODE_DT_PROC_MODE_VCn(vc, pm).

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
---
 drivers/media/platform/renesas/rcar-isp.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/media/platform/renesas/rcar-isp.c b/drivers/media/platform/renesas/rcar-isp.c
index 4bc89d4757fa..46534a479201 100644
--- a/drivers/media/platform/renesas/rcar-isp.c
+++ b/drivers/media/platform/renesas/rcar-isp.c
@@ -28,10 +28,7 @@
 #define ISPSTART_STOP					0x0000
 
 #define ISPPROCMODE_DT_REG(n)				(0x1100 + (0x4 * (n)))
-#define ISPPROCMODE_DT_PROC_MODE_VC3(pm)		(((pm) & 0x3f) << 24)
-#define ISPPROCMODE_DT_PROC_MODE_VC2(pm)		(((pm) & 0x3f) << 16)
-#define ISPPROCMODE_DT_PROC_MODE_VC1(pm)		(((pm) & 0x3f) << 8)
-#define ISPPROCMODE_DT_PROC_MODE_VC0(pm)		((pm) & 0x3f)
+#define ISPPROCMODE_DT_PROC_MODE_VCn(vc, pm)		(((pm) & 0x3f) << (8 * (vc)))
 
 #define ISPCS_FILTER_ID_CH_REG(n)			(0x3000 + (0x0100 * (n)))
 
@@ -263,10 +260,10 @@ static int risp_start(struct rcar_isp *isp, struct v4l2_subdev_state *state)
 
 	/* Setup processing method. */
 	risp_write(isp, ISPPROCMODE_DT_REG(format->datatype),
-		   ISPPROCMODE_DT_PROC_MODE_VC3(format->procmode) |
-		   ISPPROCMODE_DT_PROC_MODE_VC2(format->procmode) |
-		   ISPPROCMODE_DT_PROC_MODE_VC1(format->procmode) |
-		   ISPPROCMODE_DT_PROC_MODE_VC0(format->procmode));
+		   ISPPROCMODE_DT_PROC_MODE_VCn(3, format->procmode) |
+		   ISPPROCMODE_DT_PROC_MODE_VCn(2, format->procmode) |
+		   ISPPROCMODE_DT_PROC_MODE_VCn(1, format->procmode) |
+		   ISPPROCMODE_DT_PROC_MODE_VCn(0, format->procmode));
 
 	/* Start ISP. */
 	risp_write(isp, ISPSTART_REG, ISPSTART_START);

-- 
2.43.0


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v2 03/15] media: rcar-isp: Move {enable|disable}_streams() calls
  2025-03-26 11:09 [PATCH v2 00/15] media: rcar: Streams support Tomi Valkeinen
  2025-03-26 11:09 ` [PATCH v2 01/15] media: rcar-csi2: Use the pad version of v4l2_get_link_freq() Tomi Valkeinen
  2025-03-26 11:09 ` [PATCH v2 02/15] media: rcar-isp: Improve ISPPROCMODE_DT_PROC_MODE_VC Tomi Valkeinen
@ 2025-03-26 11:09 ` Tomi Valkeinen
  2025-03-26 11:09 ` [PATCH v2 04/15] media: rcar-csi2: " Tomi Valkeinen
                   ` (11 subsequent siblings)
  14 siblings, 0 replies; 16+ messages in thread
From: Tomi Valkeinen @ 2025-03-26 11:09 UTC (permalink / raw)
  To: Niklas Söderlund, Mauro Carvalho Chehab, Sakari Ailus
  Cc: linux-media, linux-renesas-soc, linux-kernel,
	Niklas Söderlund, Mauro Carvalho Chehab, Laurent Pinchart,
	Jacopo Mondi, Tomi Valkeinen

With multiple streams the operation to enable the ISP hardware and to
call {enable|disable}_streams() on upstream subdev will need to be
handled separately.

Prepare for that by moving {enable|disable}_streams() calls out from
risp_start() and risp_stop().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
---
 drivers/media/platform/renesas/rcar-isp.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/media/platform/renesas/rcar-isp.c b/drivers/media/platform/renesas/rcar-isp.c
index 46534a479201..8e222c9ec604 100644
--- a/drivers/media/platform/renesas/rcar-isp.c
+++ b/drivers/media/platform/renesas/rcar-isp.c
@@ -268,18 +268,11 @@ static int risp_start(struct rcar_isp *isp, struct v4l2_subdev_state *state)
 	/* Start ISP. */
 	risp_write(isp, ISPSTART_REG, ISPSTART_START);
 
-	ret = v4l2_subdev_enable_streams(isp->remote, isp->remote_pad,
-					 BIT_ULL(0));
-	if (ret)
-		risp_power_off(isp);
-
-	return ret;
+	return 0;
 }
 
 static void risp_stop(struct rcar_isp *isp)
 {
-	v4l2_subdev_disable_streams(isp->remote, isp->remote_pad, BIT_ULL(0));
-
 	/* Stop ISP. */
 	risp_write(isp, ISPSTART_REG, ISPSTART_STOP);
 
@@ -305,6 +298,13 @@ static int risp_enable_streams(struct v4l2_subdev *sd,
 			return ret;
 	}
 
+	ret = v4l2_subdev_enable_streams(isp->remote, isp->remote_pad,
+					 BIT_ULL(0));
+	if (ret) {
+		risp_stop(isp);
+		return ret;
+	}
+
 	isp->stream_count += 1;
 
 	return ret;
@@ -322,6 +322,8 @@ static int risp_disable_streams(struct v4l2_subdev *sd,
 	if (!isp->remote)
 		return -ENODEV;
 
+	v4l2_subdev_disable_streams(isp->remote, isp->remote_pad, BIT_ULL(0));
+
 	if (isp->stream_count == 1)
 		risp_stop(isp);
 

-- 
2.43.0


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v2 04/15] media: rcar-csi2: Move {enable|disable}_streams() calls
  2025-03-26 11:09 [PATCH v2 00/15] media: rcar: Streams support Tomi Valkeinen
                   ` (2 preceding siblings ...)
  2025-03-26 11:09 ` [PATCH v2 03/15] media: rcar-isp: Move {enable|disable}_streams() calls Tomi Valkeinen
@ 2025-03-26 11:09 ` Tomi Valkeinen
  2025-03-26 11:09 ` [PATCH v2 05/15] media: rcar-csi2: Move rcar2_calc_mbps() Tomi Valkeinen
                   ` (10 subsequent siblings)
  14 siblings, 0 replies; 16+ messages in thread
From: Tomi Valkeinen @ 2025-03-26 11:09 UTC (permalink / raw)
  To: Niklas Söderlund, Mauro Carvalho Chehab, Sakari Ailus
  Cc: linux-media, linux-renesas-soc, linux-kernel,
	Niklas Söderlund, Mauro Carvalho Chehab, Laurent Pinchart,
	Jacopo Mondi, Tomi Valkeinen

With multiple streams the operation to enable the CSI-2 hardware and to
call {enable|disable}_streams() on upstream subdev will need to be
handled separately.

Prepare for that by moving {enable|disable}_streams() calls out from
rcsi2_start() and rcsi2_stop().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
---
 drivers/media/platform/renesas/rcar-csi2.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/media/platform/renesas/rcar-csi2.c b/drivers/media/platform/renesas/rcar-csi2.c
index ddbdde23c122..698eb0e60f32 100644
--- a/drivers/media/platform/renesas/rcar-csi2.c
+++ b/drivers/media/platform/renesas/rcar-csi2.c
@@ -1573,20 +1573,12 @@ static int rcsi2_start(struct rcar_csi2 *priv, struct v4l2_subdev_state *state)
 		return ret;
 	}
 
-	ret = v4l2_subdev_enable_streams(priv->remote, priv->remote_pad,
-					 BIT_ULL(0));
-	if (ret) {
-		rcsi2_enter_standby(priv);
-		return ret;
-	}
-
 	return 0;
 }
 
 static void rcsi2_stop(struct rcar_csi2 *priv)
 {
 	rcsi2_enter_standby(priv);
-	v4l2_subdev_disable_streams(priv->remote, priv->remote_pad, BIT_ULL(0));
 }
 
 static int rcsi2_enable_streams(struct v4l2_subdev *sd,
@@ -1608,6 +1600,13 @@ static int rcsi2_enable_streams(struct v4l2_subdev *sd,
 			return ret;
 	}
 
+	ret = v4l2_subdev_enable_streams(priv->remote, priv->remote_pad,
+					 BIT_ULL(0));
+	if (ret) {
+		rcsi2_stop(priv);
+		return ret;
+	}
+
 	priv->stream_count += 1;
 
 	return ret;
@@ -1629,6 +1628,8 @@ static int rcsi2_disable_streams(struct v4l2_subdev *sd,
 	if (priv->stream_count == 1)
 		rcsi2_stop(priv);
 
+	v4l2_subdev_disable_streams(priv->remote, priv->remote_pad, BIT_ULL(0));
+
 	priv->stream_count -= 1;
 
 	return ret;

-- 
2.43.0


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v2 05/15] media: rcar-csi2: Move rcar2_calc_mbps()
  2025-03-26 11:09 [PATCH v2 00/15] media: rcar: Streams support Tomi Valkeinen
                   ` (3 preceding siblings ...)
  2025-03-26 11:09 ` [PATCH v2 04/15] media: rcar-csi2: " Tomi Valkeinen
@ 2025-03-26 11:09 ` Tomi Valkeinen
  2025-03-26 11:09 ` [PATCH v2 06/15] media: rcar-csi2: Simplify rcsi2_calc_mbps() Tomi Valkeinen
                   ` (9 subsequent siblings)
  14 siblings, 0 replies; 16+ messages in thread
From: Tomi Valkeinen @ 2025-03-26 11:09 UTC (permalink / raw)
  To: Niklas Söderlund, Mauro Carvalho Chehab, Sakari Ailus
  Cc: linux-media, linux-renesas-soc, linux-kernel,
	Niklas Söderlund, Mauro Carvalho Chehab, Laurent Pinchart,
	Jacopo Mondi, Tomi Valkeinen

Move the function so that it can call rcsi2_get_active_lanes() in the
following patch.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
---
 drivers/media/platform/renesas/rcar-csi2.c | 66 +++++++++++++++---------------
 1 file changed, 33 insertions(+), 33 deletions(-)

diff --git a/drivers/media/platform/renesas/rcar-csi2.c b/drivers/media/platform/renesas/rcar-csi2.c
index 698eb0e60f32..8aca35096408 100644
--- a/drivers/media/platform/renesas/rcar-csi2.c
+++ b/drivers/media/platform/renesas/rcar-csi2.c
@@ -951,39 +951,6 @@ static int rcsi2_set_phypll(struct rcar_csi2 *priv, unsigned int mbps)
 	return 0;
 }
 
-static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp,
-			   unsigned int lanes)
-{
-	struct media_pad *remote_pad;
-	struct v4l2_subdev *source;
-	s64 freq;
-	u64 mbps;
-
-	if (!priv->remote)
-		return -ENODEV;
-
-	source = priv->remote;
-	remote_pad = &source->entity.pads[priv->remote_pad];
-
-	freq = v4l2_get_link_freq(remote_pad, bpp, 2 * lanes);
-	if (freq < 0) {
-		int ret = (int)freq;
-
-		dev_err(priv->dev, "failed to get link freq for %s: %d\n",
-			source->name, ret);
-
-		return ret;
-	}
-
-	mbps = div_u64(freq * 2, MEGA);
-
-	/* Adjust for C-PHY, divide by 2.8. */
-	if (priv->cphy)
-		mbps = div_u64(mbps * 5, 14);
-
-	return mbps;
-}
-
 static int rcsi2_get_active_lanes(struct rcar_csi2 *priv,
 				  unsigned int *lanes)
 {
@@ -1031,6 +998,39 @@ static int rcsi2_get_active_lanes(struct rcar_csi2 *priv,
 	return 0;
 }
 
+static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp,
+			   unsigned int lanes)
+{
+	struct media_pad *remote_pad;
+	struct v4l2_subdev *source;
+	s64 freq;
+	u64 mbps;
+
+	if (!priv->remote)
+		return -ENODEV;
+
+	source = priv->remote;
+	remote_pad = &source->entity.pads[priv->remote_pad];
+
+	freq = v4l2_get_link_freq(remote_pad, bpp, 2 * lanes);
+	if (freq < 0) {
+		int ret = (int)freq;
+
+		dev_err(priv->dev, "failed to get link freq for %s: %d\n",
+			source->name, ret);
+
+		return ret;
+	}
+
+	mbps = div_u64(freq * 2, MEGA);
+
+	/* Adjust for C-PHY, divide by 2.8. */
+	if (priv->cphy)
+		mbps = div_u64(mbps * 5, 14);
+
+	return mbps;
+}
+
 static int rcsi2_start_receiver_gen3(struct rcar_csi2 *priv,
 				     struct v4l2_subdev_state *state)
 {

-- 
2.43.0


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v2 06/15] media: rcar-csi2: Simplify rcsi2_calc_mbps()
  2025-03-26 11:09 [PATCH v2 00/15] media: rcar: Streams support Tomi Valkeinen
                   ` (4 preceding siblings ...)
  2025-03-26 11:09 ` [PATCH v2 05/15] media: rcar-csi2: Move rcar2_calc_mbps() Tomi Valkeinen
@ 2025-03-26 11:09 ` Tomi Valkeinen
  2025-03-26 11:09 ` [PATCH v2 07/15] media: rcar-csi2: Optimize rcsi2_calc_mbps() Tomi Valkeinen
                   ` (8 subsequent siblings)
  14 siblings, 0 replies; 16+ messages in thread
From: Tomi Valkeinen @ 2025-03-26 11:09 UTC (permalink / raw)
  To: Niklas Söderlund, Mauro Carvalho Chehab, Sakari Ailus
  Cc: linux-media, linux-renesas-soc, linux-kernel,
	Niklas Söderlund, Mauro Carvalho Chehab, Laurent Pinchart,
	Jacopo Mondi, Tomi Valkeinen

Instead of taking the bpp and the number of lanes as parameters to
rcsi2_calc_mbps(), change the function to get those parameters inside
the function. This centralizes the code a bit and makes it easier to add
streams support.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
---
 drivers/media/platform/renesas/rcar-csi2.c | 45 ++++++++++++++++--------------
 1 file changed, 24 insertions(+), 21 deletions(-)

diff --git a/drivers/media/platform/renesas/rcar-csi2.c b/drivers/media/platform/renesas/rcar-csi2.c
index 8aca35096408..90973f3cba38 100644
--- a/drivers/media/platform/renesas/rcar-csi2.c
+++ b/drivers/media/platform/renesas/rcar-csi2.c
@@ -998,13 +998,18 @@ static int rcsi2_get_active_lanes(struct rcar_csi2 *priv,
 	return 0;
 }
 
-static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp,
-			   unsigned int lanes)
+static int rcsi2_calc_mbps(struct rcar_csi2 *priv,
+			   struct v4l2_subdev_state *state)
 {
+	const struct rcar_csi2_format *format;
+	struct v4l2_mbus_framefmt *fmt;
 	struct media_pad *remote_pad;
 	struct v4l2_subdev *source;
+	unsigned int lanes;
+	unsigned int bpp;
 	s64 freq;
 	u64 mbps;
+	int ret;
 
 	if (!priv->remote)
 		return -ENODEV;
@@ -1012,6 +1017,20 @@ static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp,
 	source = priv->remote;
 	remote_pad = &source->entity.pads[priv->remote_pad];
 
+	ret = rcsi2_get_active_lanes(priv, &lanes);
+	if (ret)
+		return ret;
+
+	fmt = v4l2_subdev_state_get_format(state, RCAR_CSI2_SINK);
+	if (!fmt)
+		return -EINVAL;
+
+	format = rcsi2_code_to_fmt(fmt->code);
+	if (!format)
+		return -EINVAL;
+
+	bpp = format->bpp;
+
 	freq = v4l2_get_link_freq(remote_pad, bpp, 2 * lanes);
 	if (freq < 0) {
 		int ret = (int)freq;
@@ -1092,7 +1111,7 @@ static int rcsi2_start_receiver_gen3(struct rcar_csi2 *priv,
 	phycnt = PHYCNT_ENABLECLK;
 	phycnt |= (1 << lanes) - 1;
 
-	mbps = rcsi2_calc_mbps(priv, format->bpp, lanes);
+	mbps = rcsi2_calc_mbps(priv, state);
 	if (mbps < 0)
 		return mbps;
 
@@ -1300,23 +1319,15 @@ static int rcsi2_c_phy_setting_v4h(struct rcar_csi2 *priv, int msps)
 static int rcsi2_start_receiver_v4h(struct rcar_csi2 *priv,
 				    struct v4l2_subdev_state *state)
 {
-	const struct rcar_csi2_format *format;
-	const struct v4l2_mbus_framefmt *fmt;
 	unsigned int lanes;
 	int msps;
 	int ret;
 
-	/* Use the format on the sink pad to compute the receiver config. */
-	fmt = v4l2_subdev_state_get_format(state, RCAR_CSI2_SINK);
-	format = rcsi2_code_to_fmt(fmt->code);
-	if (!format)
-		return -EINVAL;
-
 	ret = rcsi2_get_active_lanes(priv, &lanes);
 	if (ret)
 		return ret;
 
-	msps = rcsi2_calc_mbps(priv, format->bpp, lanes);
+	msps = rcsi2_calc_mbps(priv, state);
 	if (msps < 0)
 		return msps;
 
@@ -1494,23 +1505,15 @@ static int rcsi2_init_common_v4m(struct rcar_csi2 *priv, unsigned int mbps)
 static int rcsi2_start_receiver_v4m(struct rcar_csi2 *priv,
 				    struct v4l2_subdev_state *state)
 {
-	const struct rcar_csi2_format *format;
-	const struct v4l2_mbus_framefmt *fmt;
 	unsigned int lanes;
 	int mbps;
 	int ret;
 
-	/* Calculate parameters */
-	fmt = v4l2_subdev_state_get_format(state, RCAR_CSI2_SINK);
-	format = rcsi2_code_to_fmt(fmt->code);
-	if (!format)
-		return -EINVAL;
-
 	ret = rcsi2_get_active_lanes(priv, &lanes);
 	if (ret)
 		return ret;
 
-	mbps = rcsi2_calc_mbps(priv, format->bpp, lanes);
+	mbps = rcsi2_calc_mbps(priv, state);
 	if (mbps < 0)
 		return mbps;
 

-- 
2.43.0


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v2 07/15] media: rcar-csi2: Optimize rcsi2_calc_mbps()
  2025-03-26 11:09 [PATCH v2 00/15] media: rcar: Streams support Tomi Valkeinen
                   ` (5 preceding siblings ...)
  2025-03-26 11:09 ` [PATCH v2 06/15] media: rcar-csi2: Simplify rcsi2_calc_mbps() Tomi Valkeinen
@ 2025-03-26 11:09 ` Tomi Valkeinen
  2025-03-26 11:09 ` [PATCH v2 08/15] media: rcar-csi2: Switch to Streams API Tomi Valkeinen
                   ` (7 subsequent siblings)
  14 siblings, 0 replies; 16+ messages in thread
From: Tomi Valkeinen @ 2025-03-26 11:09 UTC (permalink / raw)
  To: Niklas Söderlund, Mauro Carvalho Chehab, Sakari Ailus
  Cc: linux-media, linux-renesas-soc, linux-kernel,
	Niklas Söderlund, Mauro Carvalho Chehab, Laurent Pinchart,
	Jacopo Mondi, Tomi Valkeinen

With modern drivers supporting link-freq, we don't need to do any
calculations based on the bpp and number of lanes when figuring out the
link frequency. However, the code currently always runs code to get the
bpp and number of lanes.

Optimize the rcsi2_calc_mbps() so that we only do that when needed, i.e.
when querying the link-freq is not supported by the upstream subdevice.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
---
 drivers/media/platform/renesas/rcar-csi2.c | 50 +++++++++++++++++-------------
 1 file changed, 29 insertions(+), 21 deletions(-)

diff --git a/drivers/media/platform/renesas/rcar-csi2.c b/drivers/media/platform/renesas/rcar-csi2.c
index 90973f3cba38..e0a0fd96459b 100644
--- a/drivers/media/platform/renesas/rcar-csi2.c
+++ b/drivers/media/platform/renesas/rcar-csi2.c
@@ -1001,15 +1001,10 @@ static int rcsi2_get_active_lanes(struct rcar_csi2 *priv,
 static int rcsi2_calc_mbps(struct rcar_csi2 *priv,
 			   struct v4l2_subdev_state *state)
 {
-	const struct rcar_csi2_format *format;
-	struct v4l2_mbus_framefmt *fmt;
 	struct media_pad *remote_pad;
 	struct v4l2_subdev *source;
-	unsigned int lanes;
-	unsigned int bpp;
 	s64 freq;
 	u64 mbps;
-	int ret;
 
 	if (!priv->remote)
 		return -ENODEV;
@@ -1017,28 +1012,41 @@ static int rcsi2_calc_mbps(struct rcar_csi2 *priv,
 	source = priv->remote;
 	remote_pad = &source->entity.pads[priv->remote_pad];
 
-	ret = rcsi2_get_active_lanes(priv, &lanes);
-	if (ret)
-		return ret;
+	/*
+	 * First try to get the real link freq. If that fails, try the heuristic
+	 * method with bpp and lanes (but that only works for one route).
+	 */
+	freq = v4l2_get_link_freq(remote_pad, 0, 0);
+	if (freq < 0) {
+		const struct rcar_csi2_format *format;
+		struct v4l2_mbus_framefmt *fmt;
+		unsigned int lanes;
+		unsigned int bpp;
+		int ret;
 
-	fmt = v4l2_subdev_state_get_format(state, RCAR_CSI2_SINK);
-	if (!fmt)
-		return -EINVAL;
+		ret = rcsi2_get_active_lanes(priv, &lanes);
+		if (ret)
+			return ret;
 
-	format = rcsi2_code_to_fmt(fmt->code);
-	if (!format)
-		return -EINVAL;
+		fmt = v4l2_subdev_state_get_format(state, RCAR_CSI2_SINK);
+		if (!fmt)
+			return -EINVAL;
 
-	bpp = format->bpp;
+		format = rcsi2_code_to_fmt(fmt->code);
+		if (!format)
+			return -EINVAL;
 
-	freq = v4l2_get_link_freq(remote_pad, bpp, 2 * lanes);
-	if (freq < 0) {
-		int ret = (int)freq;
+		bpp = format->bpp;
 
-		dev_err(priv->dev, "failed to get link freq for %s: %d\n",
-			source->name, ret);
+		freq = v4l2_get_link_freq(remote_pad, bpp, 2 * lanes);
+		if (freq < 0) {
+			int ret = (int)freq;
 
-		return ret;
+			dev_err(priv->dev, "failed to get link freq for %s: %d\n",
+				source->name, ret);
+
+			return ret;
+		}
 	}
 
 	mbps = div_u64(freq * 2, MEGA);

-- 
2.43.0


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v2 08/15] media: rcar-csi2: Switch to Streams API
  2025-03-26 11:09 [PATCH v2 00/15] media: rcar: Streams support Tomi Valkeinen
                   ` (6 preceding siblings ...)
  2025-03-26 11:09 ` [PATCH v2 07/15] media: rcar-csi2: Optimize rcsi2_calc_mbps() Tomi Valkeinen
@ 2025-03-26 11:09 ` Tomi Valkeinen
  2025-03-26 11:09 ` [PATCH v2 09/15] media: rcar-isp: " Tomi Valkeinen
                   ` (6 subsequent siblings)
  14 siblings, 0 replies; 16+ messages in thread
From: Tomi Valkeinen @ 2025-03-26 11:09 UTC (permalink / raw)
  To: Niklas Söderlund, Mauro Carvalho Chehab, Sakari Ailus
  Cc: linux-media, linux-renesas-soc, linux-kernel,
	Niklas Söderlund, Mauro Carvalho Chehab, Laurent Pinchart,
	Jacopo Mondi, Tomi Valkeinen

Switch to Streams API with a single hardcoded route. This breaks any
existing userspace which depended on the custom rcar streams
implementation, but a single camera use case should continue to work.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
---
 drivers/media/platform/renesas/rcar-csi2.c | 47 +++++++++++++++++++++---------
 1 file changed, 33 insertions(+), 14 deletions(-)

diff --git a/drivers/media/platform/renesas/rcar-csi2.c b/drivers/media/platform/renesas/rcar-csi2.c
index e0a0fd96459b..20bd44274bd2 100644
--- a/drivers/media/platform/renesas/rcar-csi2.c
+++ b/drivers/media/platform/renesas/rcar-csi2.c
@@ -1028,7 +1028,7 @@ static int rcsi2_calc_mbps(struct rcar_csi2 *priv,
 		if (ret)
 			return ret;
 
-		fmt = v4l2_subdev_state_get_format(state, RCAR_CSI2_SINK);
+		fmt = v4l2_subdev_state_get_format(state, RCAR_CSI2_SINK, 0);
 		if (!fmt)
 			return -EINVAL;
 
@@ -1069,7 +1069,7 @@ static int rcsi2_start_receiver_gen3(struct rcar_csi2 *priv,
 	int mbps, ret;
 
 	/* Use the format on the sink pad to compute the receiver config. */
-	fmt = v4l2_subdev_state_get_format(state, RCAR_CSI2_SINK);
+	fmt = v4l2_subdev_state_get_format(state, RCAR_CSI2_SINK, 0);
 
 	dev_dbg(priv->dev, "Input size (%ux%u%c)\n",
 		fmt->width, fmt->height,
@@ -1650,8 +1650,7 @@ static int rcsi2_set_pad_format(struct v4l2_subdev *sd,
 				struct v4l2_subdev_state *state,
 				struct v4l2_subdev_format *format)
 {
-	struct rcar_csi2 *priv = sd_to_csi2(sd);
-	unsigned int num_pads = rcsi2_num_pads(priv);
+	struct v4l2_mbus_framefmt *fmt;
 
 	if (format->pad > RCAR_CSI2_SINK)
 		return v4l2_subdev_get_fmt(sd, state, format);
@@ -1659,11 +1658,20 @@ static int rcsi2_set_pad_format(struct v4l2_subdev *sd,
 	if (!rcsi2_code_to_fmt(format->format.code))
 		format->format.code = rcar_csi2_formats[0].code;
 
-	*v4l2_subdev_state_get_format(state, format->pad) = format->format;
+	/* Set sink format */
+	fmt = v4l2_subdev_state_get_format(state, format->pad, format->stream);
+	if (!fmt)
+		return -EINVAL;
+
+	*fmt = format->format;
+
+	/* Propagate to source format */
+	fmt = v4l2_subdev_state_get_opposite_stream_format(state, format->pad,
+							   format->stream);
+	if (!fmt)
+		return -EINVAL;
 
-	/* Propagate the format to the source pads. */
-	for (unsigned int i = RCAR_CSI2_SOURCE_VC0; i < num_pads; i++)
-		*v4l2_subdev_state_get_format(state, i) = format->format;
+	*fmt = format->format;
 
 	return 0;
 }
@@ -1683,8 +1691,15 @@ static const struct v4l2_subdev_ops rcar_csi2_subdev_ops = {
 static int rcsi2_init_state(struct v4l2_subdev *sd,
 			    struct v4l2_subdev_state *state)
 {
-	struct rcar_csi2 *priv = sd_to_csi2(sd);
-	unsigned int num_pads = rcsi2_num_pads(priv);
+	static struct v4l2_subdev_route routes[] = {
+		{
+			.sink_pad = RCAR_CSI2_SINK,
+			.sink_stream = 0,
+			.source_pad = RCAR_CSI2_SOURCE_VC0,
+			.source_stream = 0,
+			.flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE,
+		},
+	};
 
 	static const struct v4l2_mbus_framefmt rcar_csi2_default_fmt = {
 		.width		= 1920,
@@ -1697,10 +1712,13 @@ static int rcsi2_init_state(struct v4l2_subdev *sd,
 		.xfer_func	= V4L2_XFER_FUNC_DEFAULT,
 	};
 
-	for (unsigned int i = RCAR_CSI2_SINK; i < num_pads; i++)
-		*v4l2_subdev_state_get_format(state, i) = rcar_csi2_default_fmt;
+	static const struct v4l2_subdev_krouting routing = {
+		.num_routes = ARRAY_SIZE(routes),
+		.routes = routes,
+	};
 
-	return 0;
+	return v4l2_subdev_set_routing_with_fmt(sd, state, &routing,
+						&rcar_csi2_default_fmt);
 }
 
 static const struct v4l2_subdev_internal_ops rcar_csi2_internal_ops = {
@@ -2356,7 +2374,8 @@ static int rcsi2_probe(struct platform_device *pdev)
 	v4l2_set_subdevdata(&priv->subdev, &pdev->dev);
 	snprintf(priv->subdev.name, sizeof(priv->subdev.name), "%s %s",
 		 KBUILD_MODNAME, dev_name(&pdev->dev));
-	priv->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
+	priv->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE |
+			     V4L2_SUBDEV_FL_STREAMS;
 
 	priv->subdev.entity.function = MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER;
 	priv->subdev.entity.ops = &rcar_csi2_entity_ops;

-- 
2.43.0


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v2 09/15] media: rcar-isp: Switch to Streams API
  2025-03-26 11:09 [PATCH v2 00/15] media: rcar: Streams support Tomi Valkeinen
                   ` (7 preceding siblings ...)
  2025-03-26 11:09 ` [PATCH v2 08/15] media: rcar-csi2: Switch to Streams API Tomi Valkeinen
@ 2025-03-26 11:09 ` Tomi Valkeinen
  2025-03-26 11:09 ` [PATCH v2 10/15] media: rcar-csi2: Add .get_frame_desc op Tomi Valkeinen
                   ` (5 subsequent siblings)
  14 siblings, 0 replies; 16+ messages in thread
From: Tomi Valkeinen @ 2025-03-26 11:09 UTC (permalink / raw)
  To: Niklas Söderlund, Mauro Carvalho Chehab, Sakari Ailus
  Cc: linux-media, linux-renesas-soc, linux-kernel,
	Niklas Söderlund, Mauro Carvalho Chehab, Laurent Pinchart,
	Jacopo Mondi, Tomi Valkeinen

Switch to Streams API with a single hardcoded route. This breaks any
existing userspace which depended on the custom rcar streams
implementation, but a single camera use case should continue to work.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
---
 drivers/media/platform/renesas/rcar-isp.c | 62 +++++++++++++++++++++++++++----
 1 file changed, 55 insertions(+), 7 deletions(-)

diff --git a/drivers/media/platform/renesas/rcar-isp.c b/drivers/media/platform/renesas/rcar-isp.c
index 8e222c9ec604..5f3fcdb7e37e 100644
--- a/drivers/media/platform/renesas/rcar-isp.c
+++ b/drivers/media/platform/renesas/rcar-isp.c
@@ -124,6 +124,17 @@ static const struct rcar_isp_format rcar_isp_formats[] = {
 	},
 };
 
+static const struct v4l2_mbus_framefmt risp_default_fmt = {
+	.width = 1920,
+	.height = 1080,
+	.code = MEDIA_BUS_FMT_RGB888_1X24,
+	.colorspace = V4L2_COLORSPACE_SRGB,
+	.field = V4L2_FIELD_NONE,
+	.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT,
+	.quantization = V4L2_QUANTIZATION_DEFAULT,
+	.xfer_func = V4L2_XFER_FUNC_DEFAULT,
+};
+
 static const struct rcar_isp_format *risp_code_to_fmt(unsigned int code)
 {
 	unsigned int i;
@@ -222,7 +233,7 @@ static int risp_start(struct rcar_isp *isp, struct v4l2_subdev_state *state)
 	u32 sel_csi = 0;
 	int ret;
 
-	fmt = v4l2_subdev_state_get_format(state, RCAR_ISP_SINK);
+	fmt = v4l2_subdev_state_get_format(state, RCAR_ISP_SINK, 0);
 	if (!fmt)
 		return -EINVAL;
 
@@ -336,7 +347,7 @@ static int risp_set_pad_format(struct v4l2_subdev *sd,
 			       struct v4l2_subdev_state *state,
 			       struct v4l2_subdev_format *format)
 {
-	struct v4l2_mbus_framefmt *framefmt;
+	struct v4l2_mbus_framefmt *fmt;
 
 	if (format->pad > RCAR_ISP_SINK)
 		return v4l2_subdev_get_fmt(sd, state, format);
@@ -344,10 +355,20 @@ static int risp_set_pad_format(struct v4l2_subdev *sd,
 	if (!risp_code_to_fmt(format->format.code))
 		format->format.code = rcar_isp_formats[0].code;
 
-	for (unsigned int i = 0; i < RCAR_ISP_NUM_PADS; i++) {
-		framefmt = v4l2_subdev_state_get_format(state, i);
-		*framefmt = format->format;
-	}
+	/* Set sink format */
+	fmt = v4l2_subdev_state_get_format(state, format->pad, format->stream);
+	if (!fmt)
+		return -EINVAL;
+
+	*fmt = format->format;
+
+	/* Propagate to source format */
+	fmt = v4l2_subdev_state_get_opposite_stream_format(state, format->pad,
+							   format->stream);
+	if (!fmt)
+		return -EINVAL;
+
+	*fmt = format->format;
 
 	return 0;
 }
@@ -364,6 +385,32 @@ static const struct v4l2_subdev_ops rcar_isp_subdev_ops = {
 	.pad	= &risp_pad_ops,
 };
 
+static int risp_init_state(struct v4l2_subdev *sd,
+			   struct v4l2_subdev_state *state)
+{
+	static struct v4l2_subdev_route routes[] = {
+		{
+			.sink_pad = RCAR_ISP_SINK,
+			.sink_stream = 0,
+			.source_pad = RCAR_ISP_PORT0,
+			.source_stream = 0,
+			.flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE,
+		},
+	};
+
+	static const struct v4l2_subdev_krouting routing = {
+		.num_routes = ARRAY_SIZE(routes),
+		.routes = routes,
+	};
+
+	return v4l2_subdev_set_routing_with_fmt(sd, state, &routing,
+						&risp_default_fmt);
+}
+
+static const struct v4l2_subdev_internal_ops risp_internal_ops = {
+	.init_state = risp_init_state,
+};
+
 /* -----------------------------------------------------------------------------
  * Async handling and registration of subdevices and links
  */
@@ -510,11 +557,12 @@ static int risp_probe(struct platform_device *pdev)
 
 	isp->subdev.owner = THIS_MODULE;
 	isp->subdev.dev = &pdev->dev;
+	isp->subdev.internal_ops = &risp_internal_ops;
 	v4l2_subdev_init(&isp->subdev, &rcar_isp_subdev_ops);
 	v4l2_set_subdevdata(&isp->subdev, &pdev->dev);
 	snprintf(isp->subdev.name, sizeof(isp->subdev.name), "%s %s",
 		 KBUILD_MODNAME, dev_name(&pdev->dev));
-	isp->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
+	isp->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_STREAMS;
 
 	isp->subdev.entity.function = MEDIA_ENT_F_VID_MUX;
 	isp->subdev.entity.ops = &risp_entity_ops;

-- 
2.43.0


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v2 10/15] media: rcar-csi2: Add .get_frame_desc op
  2025-03-26 11:09 [PATCH v2 00/15] media: rcar: Streams support Tomi Valkeinen
                   ` (8 preceding siblings ...)
  2025-03-26 11:09 ` [PATCH v2 09/15] media: rcar-isp: " Tomi Valkeinen
@ 2025-03-26 11:09 ` Tomi Valkeinen
  2025-03-26 11:09 ` [PATCH v2 11/15] media: rcar-isp: Call get_frame_desc to find out VC & DT Tomi Valkeinen
                   ` (4 subsequent siblings)
  14 siblings, 0 replies; 16+ messages in thread
From: Tomi Valkeinen @ 2025-03-26 11:09 UTC (permalink / raw)
  To: Niklas Söderlund, Mauro Carvalho Chehab, Sakari Ailus
  Cc: linux-media, linux-renesas-soc, linux-kernel,
	Niklas Söderlund, Mauro Carvalho Chehab, Laurent Pinchart,
	Jacopo Mondi, Tomi Valkeinen

Add v4l2_subdev_pad_ops.get_frame_desc() implementation.

We also implement a fallback for the case where the upstream subdevice
does not implement .get_frame_desc. It assumes a single stream with VC =
0 and DT based on the configured stream mbus format.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
---
 drivers/media/platform/renesas/rcar-csi2.c | 56 ++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/drivers/media/platform/renesas/rcar-csi2.c b/drivers/media/platform/renesas/rcar-csi2.c
index 20bd44274bd2..65c7f3040696 100644
--- a/drivers/media/platform/renesas/rcar-csi2.c
+++ b/drivers/media/platform/renesas/rcar-csi2.c
@@ -1676,12 +1676,68 @@ static int rcsi2_set_pad_format(struct v4l2_subdev *sd,
 	return 0;
 }
 
+static int rcsi2_get_frame_desc_fallback(struct v4l2_subdev *sd,
+					 unsigned int pad,
+					 struct v4l2_mbus_frame_desc *fd)
+{
+	const struct rcar_csi2_format *format;
+	struct v4l2_subdev_state *state;
+	struct v4l2_mbus_framefmt *fmt;
+	int ret = 0;
+
+	state = v4l2_subdev_lock_and_get_active_state(sd);
+
+	fmt = v4l2_subdev_state_get_format(state, RCAR_CSI2_SINK, 0);
+	if (!fmt) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	format = rcsi2_code_to_fmt(fmt->code);
+	if (!format) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	fd->num_entries = 1;
+	fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2;
+	fd->entry[0].stream = 0;
+	fd->entry[0].pixelcode = fmt->code;
+	fd->entry[0].bus.csi2.vc = 0;
+	fd->entry[0].bus.csi2.dt = format->datatype;
+
+out:
+	v4l2_subdev_unlock_state(state);
+
+	return ret;
+}
+
+static int rcsi2_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad,
+				struct v4l2_mbus_frame_desc *fd)
+{
+	struct rcar_csi2 *priv = sd_to_csi2(sd);
+	int ret;
+
+	if (WARN_ON(!priv->info->use_isp))
+		return -ENOTTY;
+
+	if (WARN_ON(pad != RCAR_CSI2_SOURCE_VC0))
+		return -EINVAL;
+
+	ret = v4l2_subdev_get_frame_desc_passthrough(sd, pad, fd);
+	if (ret == -ENOIOCTLCMD)
+		ret = rcsi2_get_frame_desc_fallback(sd, pad, fd);
+	return ret;
+}
+
 static const struct v4l2_subdev_pad_ops rcar_csi2_pad_ops = {
 	.enable_streams = rcsi2_enable_streams,
 	.disable_streams = rcsi2_disable_streams,
 
 	.set_fmt = rcsi2_set_pad_format,
 	.get_fmt = v4l2_subdev_get_fmt,
+
+	.get_frame_desc = rcsi2_get_frame_desc,
 };
 
 static const struct v4l2_subdev_ops rcar_csi2_subdev_ops = {

-- 
2.43.0


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v2 11/15] media: rcar-isp: Call get_frame_desc to find out VC & DT
  2025-03-26 11:09 [PATCH v2 00/15] media: rcar: Streams support Tomi Valkeinen
                   ` (9 preceding siblings ...)
  2025-03-26 11:09 ` [PATCH v2 10/15] media: rcar-csi2: Add .get_frame_desc op Tomi Valkeinen
@ 2025-03-26 11:09 ` Tomi Valkeinen
  2025-03-26 11:09 ` [PATCH v2 12/15] media: rcar-csi2: Add more stream support to rcsi2_calc_mbps() Tomi Valkeinen
                   ` (3 subsequent siblings)
  14 siblings, 0 replies; 16+ messages in thread
From: Tomi Valkeinen @ 2025-03-26 11:09 UTC (permalink / raw)
  To: Niklas Söderlund, Mauro Carvalho Chehab, Sakari Ailus
  Cc: linux-media, linux-renesas-soc, linux-kernel,
	Niklas Söderlund, Mauro Carvalho Chehab, Laurent Pinchart,
	Jacopo Mondi, Tomi Valkeinen

Call get_frame_desc to find out VC & DT, instead of hardcoding the VC
routing and deducing the DT based on the mbus format.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
---
 drivers/media/platform/renesas/rcar-isp.c | 108 +++++++++++++++++++++---------
 1 file changed, 77 insertions(+), 31 deletions(-)

diff --git a/drivers/media/platform/renesas/rcar-isp.c b/drivers/media/platform/renesas/rcar-isp.c
index 5f3fcdb7e37e..53927954ba73 100644
--- a/drivers/media/platform/renesas/rcar-isp.c
+++ b/drivers/media/platform/renesas/rcar-isp.c
@@ -225,24 +225,86 @@ static void risp_power_off(struct rcar_isp *isp)
 	pm_runtime_put(isp->dev);
 }
 
-static int risp_start(struct rcar_isp *isp, struct v4l2_subdev_state *state)
+static int risp_configure_routing(struct rcar_isp *isp,
+				  struct v4l2_subdev_state *state)
 {
-	const struct v4l2_mbus_framefmt *fmt;
-	const struct rcar_isp_format *format;
-	unsigned int vc;
-	u32 sel_csi = 0;
+	struct v4l2_mbus_frame_desc source_fd;
+	struct v4l2_subdev_route *route;
 	int ret;
 
-	fmt = v4l2_subdev_state_get_format(state, RCAR_ISP_SINK, 0);
-	if (!fmt)
-		return -EINVAL;
+	ret = v4l2_subdev_call(isp->remote, pad, get_frame_desc,
+			       isp->remote_pad, &source_fd);
+	if (ret)
+		return ret;
 
-	format = risp_code_to_fmt(fmt->code);
-	if (!format) {
-		dev_err(isp->dev, "Unsupported bus format\n");
-		return -EINVAL;
+	/* Clear the channel registers */
+	for (unsigned int ch = 0; ch < 12; ++ch) {
+		risp_write(isp, ISPCS_FILTER_ID_CH_REG(ch), 0);
+		risp_write(isp, ISPCS_DT_CODE03_CH_REG(ch), 0);
 	}
 
+	/* Clear the proc mode registers */
+	for (unsigned int dt = 0; dt < 64; ++dt)
+		risp_write(isp, ISPPROCMODE_DT_REG(dt), 0);
+
+	for_each_active_route(&state->routing, route) {
+		struct v4l2_mbus_frame_desc_entry *source_entry = NULL;
+		const struct rcar_isp_format *format;
+		const struct v4l2_mbus_framefmt *fmt;
+		unsigned int i;
+		u8 vc, dt, ch;
+		u32 v;
+
+		for (i = 0; i < source_fd.num_entries; i++) {
+			if (source_fd.entry[i].stream == route->sink_stream) {
+				source_entry = &source_fd.entry[i];
+				break;
+			}
+		}
+
+		if (!source_entry) {
+			dev_err(isp->dev,
+				"Failed to find stream from source frame desc\n");
+			return -EPIPE;
+		}
+
+		vc = source_entry->bus.csi2.vc;
+		dt = source_entry->bus.csi2.dt;
+		/* Channels 4 - 11 go to VIN */
+		ch = route->source_pad - 1 + 4;
+
+		fmt = v4l2_subdev_state_get_format(state, route->sink_pad,
+						   route->sink_stream);
+		if (!fmt)
+			return -EINVAL;
+
+		format = risp_code_to_fmt(fmt->code);
+		if (!format) {
+			dev_err(isp->dev, "Unsupported bus format\n");
+			return -EINVAL;
+		}
+
+		/* VC Filtering */
+		risp_write(isp, ISPCS_FILTER_ID_CH_REG(ch), BIT(vc));
+
+		/* DT Filtering */
+		risp_write(isp, ISPCS_DT_CODE03_CH_REG(ch),
+			   ISPCS_DT_CODE03_EN0 | ISPCS_DT_CODE03_DT0(dt));
+
+		/* Proc mode */
+		v = risp_read(isp, ISPPROCMODE_DT_REG(dt));
+		v |= ISPPROCMODE_DT_PROC_MODE_VCn(vc, format->procmode);
+		risp_write(isp, ISPPROCMODE_DT_REG(dt), v);
+	}
+
+	return 0;
+}
+
+static int risp_start(struct rcar_isp *isp, struct v4l2_subdev_state *state)
+{
+	u32 sel_csi = 0;
+	int ret;
+
 	ret = risp_power_on(isp);
 	if (ret) {
 		dev_err(isp->dev, "Failed to power on ISP\n");
@@ -256,25 +318,9 @@ static int risp_start(struct rcar_isp *isp, struct v4l2_subdev_state *state)
 	risp_write(isp, ISPINPUTSEL0_REG,
 		   risp_read(isp, ISPINPUTSEL0_REG) | sel_csi);
 
-	/* Configure Channel Selector. */
-	for (vc = 0; vc < 4; vc++) {
-		u8 ch = vc + 4;
-		u8 dt = format->datatype;
-
-		risp_write(isp, ISPCS_FILTER_ID_CH_REG(ch), BIT(vc));
-		risp_write(isp, ISPCS_DT_CODE03_CH_REG(ch),
-			   ISPCS_DT_CODE03_EN3 | ISPCS_DT_CODE03_DT3(dt) |
-			   ISPCS_DT_CODE03_EN2 | ISPCS_DT_CODE03_DT2(dt) |
-			   ISPCS_DT_CODE03_EN1 | ISPCS_DT_CODE03_DT1(dt) |
-			   ISPCS_DT_CODE03_EN0 | ISPCS_DT_CODE03_DT0(dt));
-	}
-
-	/* Setup processing method. */
-	risp_write(isp, ISPPROCMODE_DT_REG(format->datatype),
-		   ISPPROCMODE_DT_PROC_MODE_VCn(3, format->procmode) |
-		   ISPPROCMODE_DT_PROC_MODE_VCn(2, format->procmode) |
-		   ISPPROCMODE_DT_PROC_MODE_VCn(1, format->procmode) |
-		   ISPPROCMODE_DT_PROC_MODE_VCn(0, format->procmode));
+	ret = risp_configure_routing(isp, state);
+	if (ret)
+		return ret;
 
 	/* Start ISP. */
 	risp_write(isp, ISPSTART_REG, ISPSTART_START);

-- 
2.43.0


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v2 12/15] media: rcar-csi2: Add more stream support to rcsi2_calc_mbps()
  2025-03-26 11:09 [PATCH v2 00/15] media: rcar: Streams support Tomi Valkeinen
                   ` (10 preceding siblings ...)
  2025-03-26 11:09 ` [PATCH v2 11/15] media: rcar-isp: Call get_frame_desc to find out VC & DT Tomi Valkeinen
@ 2025-03-26 11:09 ` Tomi Valkeinen
  2025-03-26 11:09 ` [PATCH v2 13/15] media: rcar-csi2: Call get_frame_desc to find out VC & DT (Gen3) Tomi Valkeinen
                   ` (2 subsequent siblings)
  14 siblings, 0 replies; 16+ messages in thread
From: Tomi Valkeinen @ 2025-03-26 11:09 UTC (permalink / raw)
  To: Niklas Söderlund, Mauro Carvalho Chehab, Sakari Ailus
  Cc: linux-media, linux-renesas-soc, linux-kernel,
	Niklas Söderlund, Mauro Carvalho Chehab, Laurent Pinchart,
	Jacopo Mondi, Tomi Valkeinen

In the case where link-freq is not available, make sure we fail if there
are more than one stream configured, and also use the correct stream
number for that single stream.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
---
 drivers/media/platform/renesas/rcar-csi2.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/renesas/rcar-csi2.c b/drivers/media/platform/renesas/rcar-csi2.c
index 65c7f3040696..b9f83aae725a 100644
--- a/drivers/media/platform/renesas/rcar-csi2.c
+++ b/drivers/media/platform/renesas/rcar-csi2.c
@@ -1018,17 +1018,22 @@ static int rcsi2_calc_mbps(struct rcar_csi2 *priv,
 	 */
 	freq = v4l2_get_link_freq(remote_pad, 0, 0);
 	if (freq < 0) {
+		struct v4l2_subdev_route *route = &state->routing.routes[0];
 		const struct rcar_csi2_format *format;
 		struct v4l2_mbus_framefmt *fmt;
 		unsigned int lanes;
 		unsigned int bpp;
 		int ret;
 
+		if (state->routing.num_routes > 1)
+			return -EINVAL;
+
 		ret = rcsi2_get_active_lanes(priv, &lanes);
 		if (ret)
 			return ret;
 
-		fmt = v4l2_subdev_state_get_format(state, RCAR_CSI2_SINK, 0);
+		fmt = v4l2_subdev_state_get_format(state, route->sink_pad,
+						   route->sink_stream);
 		if (!fmt)
 			return -EINVAL;
 

-- 
2.43.0


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v2 13/15] media: rcar-csi2: Call get_frame_desc to find out VC & DT (Gen3)
  2025-03-26 11:09 [PATCH v2 00/15] media: rcar: Streams support Tomi Valkeinen
                   ` (11 preceding siblings ...)
  2025-03-26 11:09 ` [PATCH v2 12/15] media: rcar-csi2: Add more stream support to rcsi2_calc_mbps() Tomi Valkeinen
@ 2025-03-26 11:09 ` Tomi Valkeinen
  2025-03-26 11:09 ` [PATCH v2 14/15] media: rcar-csi2: Add full streams support Tomi Valkeinen
  2025-03-26 11:09 ` [PATCH v2 15/15] media: rcar-isp: " Tomi Valkeinen
  14 siblings, 0 replies; 16+ messages in thread
From: Tomi Valkeinen @ 2025-03-26 11:09 UTC (permalink / raw)
  To: Niklas Söderlund, Mauro Carvalho Chehab, Sakari Ailus
  Cc: linux-media, linux-renesas-soc, linux-kernel,
	Niklas Söderlund, Mauro Carvalho Chehab, Laurent Pinchart,
	Jacopo Mondi, Tomi Valkeinen

Call get_frame_desc to find out VC & DT, for Gen3 platforms, instead of
hardcoding the VC routing and deducing the DT based on the mbus format.

If the source subdevice doesn't implement .get_frame_desc, we use a
fallback case where we assume there's a single stream with VC = 0 and DT
based on the mbus format.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
---
 drivers/media/platform/renesas/rcar-csi2.c | 113 +++++++++++++++++++----------
 1 file changed, 76 insertions(+), 37 deletions(-)

diff --git a/drivers/media/platform/renesas/rcar-csi2.c b/drivers/media/platform/renesas/rcar-csi2.c
index b9f83aae725a..8f708196ef49 100644
--- a/drivers/media/platform/renesas/rcar-csi2.c
+++ b/drivers/media/platform/renesas/rcar-csi2.c
@@ -71,10 +71,7 @@ struct rcar_csi2;
 #define FLD_REG				0x1c
 #define FLD_FLD_NUM(n)			(((n) & 0xff) << 16)
 #define FLD_DET_SEL(n)			(((n) & 0x3) << 4)
-#define FLD_FLD_EN4			BIT(3)
-#define FLD_FLD_EN3			BIT(2)
-#define FLD_FLD_EN2			BIT(1)
-#define FLD_FLD_EN			BIT(0)
+#define FLD_FLD_EN(ch)			BIT(ch)
 
 /* Automatic Standby Control */
 #define ASTBY_REG			0x20
@@ -1066,52 +1063,94 @@ static int rcsi2_calc_mbps(struct rcar_csi2 *priv,
 static int rcsi2_start_receiver_gen3(struct rcar_csi2 *priv,
 				     struct v4l2_subdev_state *state)
 {
-	const struct rcar_csi2_format *format;
-	u32 phycnt, vcdt = 0, vcdt2 = 0, fld = 0;
-	const struct v4l2_mbus_framefmt *fmt;
+	u32 phycnt, vcdt = 0, vcdt2 = 0;
+	u32 fld = FLD_DET_SEL(1);
+	struct v4l2_mbus_frame_desc source_fd;
+	struct v4l2_subdev_route *route;
 	unsigned int lanes;
-	unsigned int i;
 	int mbps, ret;
+	u8 ch = 0;
 
-	/* Use the format on the sink pad to compute the receiver config. */
-	fmt = v4l2_subdev_state_get_format(state, RCAR_CSI2_SINK, 0);
+	ret = v4l2_subdev_call(priv->remote, pad, get_frame_desc,
+			       priv->remote_pad, &source_fd);
+	if (ret && ret != -ENOIOCTLCMD) {
+		return ret;
+	} else if (ret == -ENOIOCTLCMD) {
+		/* Create a fallback source_fd */
+		struct v4l2_mbus_frame_desc *fd = &source_fd;
+		const struct rcar_csi2_format *format;
+		struct v4l2_mbus_framefmt *fmt;
 
-	dev_dbg(priv->dev, "Input size (%ux%u%c)\n",
-		fmt->width, fmt->height,
-		fmt->field == V4L2_FIELD_NONE ? 'p' : 'i');
+		fmt = v4l2_subdev_state_get_format(state, RCAR_CSI2_SINK, 0);
+		if (!fmt)
+			return -EINVAL;
 
-	/* Code is validated in set_fmt. */
-	format = rcsi2_code_to_fmt(fmt->code);
-	if (!format)
-		return -EINVAL;
+		format = rcsi2_code_to_fmt(fmt->code);
+		if (!format)
+			return -EINVAL;
 
-	/*
-	 * Enable all supported CSI-2 channels with virtual channel and
-	 * data type matching.
-	 *
-	 * NOTE: It's not possible to get individual datatype for each
-	 *       source virtual channel. Once this is possible in V4L2
-	 *       it should be used here.
-	 */
-	for (i = 0; i < priv->info->num_channels; i++) {
+		memset(fd, 0, sizeof(*fd));
+
+		fd->num_entries = 1;
+		fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2;
+		fd->entry[0].stream = 0;
+		fd->entry[0].pixelcode = fmt->code;
+		fd->entry[0].bus.csi2.vc = 0;
+		fd->entry[0].bus.csi2.dt = format->datatype;
+	}
+
+	for_each_active_route(&state->routing, route) {
+		struct v4l2_mbus_frame_desc_entry *source_entry = NULL;
+		const struct v4l2_mbus_framefmt *fmt;
+		const struct rcar_csi2_format *format;
+		unsigned int i;
+		u8 vc, dt;
 		u32 vcdt_part;
 
-		if (priv->channel_vc[i] < 0)
-			continue;
+		for (i = 0; i < source_fd.num_entries; i++) {
+			if (source_fd.entry[i].stream == route->sink_stream) {
+				source_entry = &source_fd.entry[i];
+				break;
+			}
+		}
+
+		if (!source_entry) {
+			dev_err(priv->dev,
+				"Failed to find stream from source frame desc\n");
+			return -EPIPE;
+		}
 
-		vcdt_part = VCDT_SEL_VC(priv->channel_vc[i]) | VCDT_VCDTN_EN |
-			VCDT_SEL_DTN_ON | VCDT_SEL_DT(format->datatype);
+		vc = source_entry->bus.csi2.vc;
+		dt = source_entry->bus.csi2.dt;
+
+		vcdt_part = VCDT_SEL_VC(vc) | VCDT_VCDTN_EN |
+			VCDT_SEL_DTN_ON | VCDT_SEL_DT(dt);
 
 		/* Store in correct reg and offset. */
-		if (i < 2)
-			vcdt |= vcdt_part << ((i % 2) * 16);
+		if (ch < 2)
+			vcdt |= vcdt_part << ((ch % 2) * 16);
 		else
-			vcdt2 |= vcdt_part << ((i % 2) * 16);
-	}
+			vcdt2 |= vcdt_part << ((ch % 2) * 16);
+
+		fmt = v4l2_subdev_state_get_format(state, RCAR_CSI2_SINK,
+						   route->sink_stream);
+		if (!fmt)
+			return -EINVAL;
+
+		dev_dbg(priv->dev, "Input size (%ux%u%c)\n",
+			fmt->width, fmt->height,
+			fmt->field == V4L2_FIELD_NONE ? 'p' : 'i');
 
-	if (fmt->field == V4L2_FIELD_ALTERNATE)
-		fld = FLD_DET_SEL(1) | FLD_FLD_EN4 | FLD_FLD_EN3 | FLD_FLD_EN2
-			| FLD_FLD_EN;
+		/* Code is validated in set_fmt. */
+		format = rcsi2_code_to_fmt(fmt->code);
+		if (!format)
+			return -EINVAL;
+
+		if (fmt->field == V4L2_FIELD_ALTERNATE)
+			fld |= FLD_FLD_EN(ch);
+
+		ch++;
+	}
 
 	/*
 	 * Get the number of active data lanes inspecting the remote mbus

-- 
2.43.0


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v2 14/15] media: rcar-csi2: Add full streams support
  2025-03-26 11:09 [PATCH v2 00/15] media: rcar: Streams support Tomi Valkeinen
                   ` (12 preceding siblings ...)
  2025-03-26 11:09 ` [PATCH v2 13/15] media: rcar-csi2: Call get_frame_desc to find out VC & DT (Gen3) Tomi Valkeinen
@ 2025-03-26 11:09 ` Tomi Valkeinen
  2025-03-26 11:09 ` [PATCH v2 15/15] media: rcar-isp: " Tomi Valkeinen
  14 siblings, 0 replies; 16+ messages in thread
From: Tomi Valkeinen @ 2025-03-26 11:09 UTC (permalink / raw)
  To: Niklas Söderlund, Mauro Carvalho Chehab, Sakari Ailus
  Cc: linux-media, linux-renesas-soc, linux-kernel,
	Niklas Söderlund, Mauro Carvalho Chehab, Laurent Pinchart,
	Jacopo Mondi, Tomi Valkeinen

Add the missing pieces to enable full streams support:

- Add set_routing
- Drop the explicit uses of a single stream, and instead use the streams
  mask.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
---
 drivers/media/platform/renesas/rcar-csi2.c | 85 ++++++++++++++++++++++--------
 1 file changed, 63 insertions(+), 22 deletions(-)

diff --git a/drivers/media/platform/renesas/rcar-csi2.c b/drivers/media/platform/renesas/rcar-csi2.c
index 8f708196ef49..4a73d223229c 100644
--- a/drivers/media/platform/renesas/rcar-csi2.c
+++ b/drivers/media/platform/renesas/rcar-csi2.c
@@ -694,6 +694,17 @@ static const struct rcar_csi2_format rcar_csi2_formats[] = {
 	},
 };
 
+static const struct v4l2_mbus_framefmt rcar_csi2_default_fmt = {
+	.width		= 1920,
+	.height		= 1080,
+	.code		= MEDIA_BUS_FMT_RGB888_1X24,
+	.colorspace	= V4L2_COLORSPACE_SRGB,
+	.field		= V4L2_FIELD_NONE,
+	.ycbcr_enc	= V4L2_YCBCR_ENC_DEFAULT,
+	.quantization	= V4L2_QUANTIZATION_DEFAULT,
+	.xfer_func	= V4L2_XFER_FUNC_DEFAULT,
+};
+
 static const struct rcar_csi2_format *rcsi2_code_to_fmt(unsigned int code)
 {
 	unsigned int i;
@@ -1641,10 +1652,8 @@ static int rcsi2_enable_streams(struct v4l2_subdev *sd,
 				u64 source_streams_mask)
 {
 	struct rcar_csi2 *priv = sd_to_csi2(sd);
-	int ret = 0;
-
-	if (source_streams_mask != 1)
-		return -EINVAL;
+	u64 sink_streams;
+	int ret;
 
 	if (!priv->remote)
 		return -ENODEV;
@@ -1655,8 +1664,13 @@ static int rcsi2_enable_streams(struct v4l2_subdev *sd,
 			return ret;
 	}
 
+	sink_streams = v4l2_subdev_state_xlate_streams(state,
+						       RCAR_CSI2_SOURCE_VC0,
+						       RCAR_CSI2_SINK,
+						       &source_streams_mask);
+
 	ret = v4l2_subdev_enable_streams(priv->remote, priv->remote_pad,
-					 BIT_ULL(0));
+					 sink_streams);
 	if (ret) {
 		rcsi2_stop(priv);
 		return ret;
@@ -1672,10 +1686,7 @@ static int rcsi2_disable_streams(struct v4l2_subdev *sd,
 				 u32 source_pad, u64 source_streams_mask)
 {
 	struct rcar_csi2 *priv = sd_to_csi2(sd);
-	int ret = 0;
-
-	if (source_streams_mask != 1)
-		return -EINVAL;
+	u64 sink_streams;
 
 	if (!priv->remote)
 		return -ENODEV;
@@ -1683,11 +1694,17 @@ static int rcsi2_disable_streams(struct v4l2_subdev *sd,
 	if (priv->stream_count == 1)
 		rcsi2_stop(priv);
 
-	v4l2_subdev_disable_streams(priv->remote, priv->remote_pad, BIT_ULL(0));
+	sink_streams = v4l2_subdev_state_xlate_streams(state,
+						       RCAR_CSI2_SOURCE_VC0,
+						       RCAR_CSI2_SINK,
+						       &source_streams_mask);
+
+	v4l2_subdev_disable_streams(priv->remote, priv->remote_pad,
+				    sink_streams);
 
 	priv->stream_count -= 1;
 
-	return ret;
+	return 0;
 }
 
 static int rcsi2_set_pad_format(struct v4l2_subdev *sd,
@@ -1720,6 +1737,40 @@ static int rcsi2_set_pad_format(struct v4l2_subdev *sd,
 	return 0;
 }
 
+static int rcsi2_set_routing(struct v4l2_subdev *sd,
+			     struct v4l2_subdev_state *state,
+			     enum v4l2_subdev_format_whence which,
+			     struct v4l2_subdev_krouting *routing)
+{
+	struct rcar_csi2 *priv = sd_to_csi2(sd);
+	int ret;
+
+	if (!priv->info->use_isp)
+		return -ENOTTY;
+
+	if (routing->num_routes > V4L2_FRAME_DESC_ENTRY_MAX)
+		return -EINVAL;
+
+	if (priv->info->use_isp) {
+		ret = v4l2_subdev_routing_validate(sd, routing,
+						   V4L2_SUBDEV_ROUTING_ONLY_1_TO_1);
+	} else {
+		ret = v4l2_subdev_routing_validate(sd, routing,
+						   V4L2_SUBDEV_ROUTING_ONLY_1_TO_1 |
+						   V4L2_SUBDEV_ROUTING_NO_SOURCE_MULTIPLEXING);
+	}
+
+	if (ret)
+		return ret;
+
+	ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing,
+					       &rcar_csi2_default_fmt);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
 static int rcsi2_get_frame_desc_fallback(struct v4l2_subdev *sd,
 					 unsigned int pad,
 					 struct v4l2_mbus_frame_desc *fd)
@@ -1781,6 +1832,7 @@ static const struct v4l2_subdev_pad_ops rcar_csi2_pad_ops = {
 	.set_fmt = rcsi2_set_pad_format,
 	.get_fmt = v4l2_subdev_get_fmt,
 
+	.set_routing = rcsi2_set_routing,
 	.get_frame_desc = rcsi2_get_frame_desc,
 };
 
@@ -1801,17 +1853,6 @@ static int rcsi2_init_state(struct v4l2_subdev *sd,
 		},
 	};
 
-	static const struct v4l2_mbus_framefmt rcar_csi2_default_fmt = {
-		.width		= 1920,
-		.height		= 1080,
-		.code		= MEDIA_BUS_FMT_RGB888_1X24,
-		.colorspace	= V4L2_COLORSPACE_SRGB,
-		.field		= V4L2_FIELD_NONE,
-		.ycbcr_enc	= V4L2_YCBCR_ENC_DEFAULT,
-		.quantization	= V4L2_QUANTIZATION_DEFAULT,
-		.xfer_func	= V4L2_XFER_FUNC_DEFAULT,
-	};
-
 	static const struct v4l2_subdev_krouting routing = {
 		.num_routes = ARRAY_SIZE(routes),
 		.routes = routes,

-- 
2.43.0


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH v2 15/15] media: rcar-isp: Add full streams support
  2025-03-26 11:09 [PATCH v2 00/15] media: rcar: Streams support Tomi Valkeinen
                   ` (13 preceding siblings ...)
  2025-03-26 11:09 ` [PATCH v2 14/15] media: rcar-csi2: Add full streams support Tomi Valkeinen
@ 2025-03-26 11:09 ` Tomi Valkeinen
  14 siblings, 0 replies; 16+ messages in thread
From: Tomi Valkeinen @ 2025-03-26 11:09 UTC (permalink / raw)
  To: Niklas Söderlund, Mauro Carvalho Chehab, Sakari Ailus
  Cc: linux-media, linux-renesas-soc, linux-kernel,
	Niklas Söderlund, Mauro Carvalho Chehab, Laurent Pinchart,
	Jacopo Mondi, Tomi Valkeinen

Add the missing pieces to enable full streams support:

- Add set_routing
- Drop the explicit uses of a single stream, and instead use the streams
  mask.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
---
 drivers/media/platform/renesas/rcar-isp.c | 41 +++++++++++++++++++++++++++++--
 1 file changed, 39 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/renesas/rcar-isp.c b/drivers/media/platform/renesas/rcar-isp.c
index 53927954ba73..20aa451cc64f 100644
--- a/drivers/media/platform/renesas/rcar-isp.c
+++ b/drivers/media/platform/renesas/rcar-isp.c
@@ -342,6 +342,7 @@ static int risp_enable_streams(struct v4l2_subdev *sd,
 {
 	struct rcar_isp *isp = sd_to_isp(sd);
 	int ret = 0;
+	u64 sink_streams;
 
 	if (source_streams_mask != 1)
 		return -EINVAL;
@@ -355,8 +356,13 @@ static int risp_enable_streams(struct v4l2_subdev *sd,
 			return ret;
 	}
 
+	sink_streams = v4l2_subdev_state_xlate_streams(state,
+						       source_pad,
+						       RCAR_ISP_SINK,
+						       &source_streams_mask);
+
 	ret = v4l2_subdev_enable_streams(isp->remote, isp->remote_pad,
-					 BIT_ULL(0));
+					 sink_streams);
 	if (ret) {
 		risp_stop(isp);
 		return ret;
@@ -372,6 +378,7 @@ static int risp_disable_streams(struct v4l2_subdev *sd,
 				u64 source_streams_mask)
 {
 	struct rcar_isp *isp = sd_to_isp(sd);
+	u64 sink_streams;
 
 	if (source_streams_mask != 1)
 		return -EINVAL;
@@ -379,7 +386,12 @@ static int risp_disable_streams(struct v4l2_subdev *sd,
 	if (!isp->remote)
 		return -ENODEV;
 
-	v4l2_subdev_disable_streams(isp->remote, isp->remote_pad, BIT_ULL(0));
+	sink_streams = v4l2_subdev_state_xlate_streams(state,
+						       source_pad,
+						       RCAR_ISP_SINK,
+						       &source_streams_mask);
+
+	v4l2_subdev_disable_streams(isp->remote, isp->remote_pad, sink_streams);
 
 	if (isp->stream_count == 1)
 		risp_stop(isp);
@@ -419,12 +431,37 @@ static int risp_set_pad_format(struct v4l2_subdev *sd,
 	return 0;
 }
 
+static int risp_set_routing(struct v4l2_subdev *sd,
+			    struct v4l2_subdev_state *state,
+			    enum v4l2_subdev_format_whence which,
+			    struct v4l2_subdev_krouting *routing)
+{
+	int ret;
+
+	if (routing->num_routes > V4L2_FRAME_DESC_ENTRY_MAX)
+		return -EINVAL;
+
+	ret = v4l2_subdev_routing_validate(sd, routing,
+					   V4L2_SUBDEV_ROUTING_ONLY_1_TO_1 |
+					   V4L2_SUBDEV_ROUTING_NO_SOURCE_MULTIPLEXING);
+	if (ret)
+		return ret;
+
+	ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing,
+					       &risp_default_fmt);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
 static const struct v4l2_subdev_pad_ops risp_pad_ops = {
 	.enable_streams = risp_enable_streams,
 	.disable_streams = risp_disable_streams,
 	.set_fmt = risp_set_pad_format,
 	.get_fmt = v4l2_subdev_get_fmt,
 	.link_validate = v4l2_subdev_link_validate_default,
+	.set_routing = risp_set_routing,
 };
 
 static const struct v4l2_subdev_ops rcar_isp_subdev_ops = {

-- 
2.43.0


^ permalink raw reply	[flat|nested] 16+ messages in thread

end of thread, other threads:[~2025-03-26 11:10 UTC | newest]

Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-03-26 11:09 [PATCH v2 00/15] media: rcar: Streams support Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 01/15] media: rcar-csi2: Use the pad version of v4l2_get_link_freq() Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 02/15] media: rcar-isp: Improve ISPPROCMODE_DT_PROC_MODE_VC Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 03/15] media: rcar-isp: Move {enable|disable}_streams() calls Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 04/15] media: rcar-csi2: " Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 05/15] media: rcar-csi2: Move rcar2_calc_mbps() Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 06/15] media: rcar-csi2: Simplify rcsi2_calc_mbps() Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 07/15] media: rcar-csi2: Optimize rcsi2_calc_mbps() Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 08/15] media: rcar-csi2: Switch to Streams API Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 09/15] media: rcar-isp: " Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 10/15] media: rcar-csi2: Add .get_frame_desc op Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 11/15] media: rcar-isp: Call get_frame_desc to find out VC & DT Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 12/15] media: rcar-csi2: Add more stream support to rcsi2_calc_mbps() Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 13/15] media: rcar-csi2: Call get_frame_desc to find out VC & DT (Gen3) Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 14/15] media: rcar-csi2: Add full streams support Tomi Valkeinen
2025-03-26 11:09 ` [PATCH v2 15/15] media: rcar-isp: " Tomi Valkeinen

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®