[PATCH] dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller

mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed

* [PATCH] dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller
@ 2025-05-13 16:23 Hugo Villeneuve
  2025-05-14  6:00 ` Biju Das
  0 siblings, 1 reply; 3+ messages in thread
From: Hugo Villeneuve @ 2025-05-13 16:23 UTC (permalink / raw)
  To: Andrzej Hajda, Neil Armstrong, Robert Foss, Laurent Pinchart,
	Jonas Karlman, Jernej Skrabec, David Airlie, Simona Vetter,
	Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Geert Uytterhoeven,
	Magnus Damm, Biju Das
  Cc: hugo, Hugo Villeneuve, dri-devel, devicetree, linux-kernel,
	linux-renesas-soc

From: Hugo Villeneuve <hvilleneuve@dimonoff.com>

Allow to inherit valid properties from the dsi-controller. This fixes the
following warning when adding a panel property:

rzg2lc.dtb: dsi@10850000: '#address-cells', '#size-cells', 'panel@0' do not
    match any of the regexes: 'pinctrl-[0-9]+'
    from schema $id:
        http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml#

Also add a panel property to the example.

Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
---
 .../bindings/display/bridge/renesas,dsi.yaml  | 21 +++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
index e08c24633926b..e0906a46fb118 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
@@ -128,14 +128,17 @@ required:
   - power-domains
   - ports
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/clock/r9a07g044-cpg.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     dsi0: dsi@10850000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
         compatible = "renesas,r9a07g044-mipi-dsi", "renesas,rzg2l-mipi-dsi";
         reg = <0x10850000 0x20000>;
         interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
@@ -160,6 +163,20 @@ examples:
         reset-names = "rst", "arst", "prst";
         power-domains = <&cpg>;
 
+        panel@0 {
+            compatible = "rocktech,jh057n00900";
+            reg = <0>;
+            vcc-supply = <&reg_2v8_p>;
+            iovcc-supply = <&reg_1v8_p>;
+            reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+
         ports {
             #address-cells = <1>;
             #size-cells = <0>;
@@ -175,7 +192,7 @@ examples:
                 reg = <1>;
                 dsi0_out: endpoint {
                     data-lanes = <1 2 3 4>;
-                    remote-endpoint = <&adv7535_in>;
+                    remote-endpoint = <&panel_in>;
                 };
             };
         };

base-commit: e9565e23cd89d4d5cd4388f8742130be1d6f182d
-- 
2.39.5


^ permalink raw reply	[flat|nested] 3+ messages in thread

* RE: [PATCH] dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller
  2025-05-13 16:23 [PATCH] dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller Hugo Villeneuve
@ 2025-05-14  6:00 ` Biju Das
  2025-05-14 13:48   ` Hugo Villeneuve
  0 siblings, 1 reply; 3+ messages in thread
From: Biju Das @ 2025-05-14  6:00 UTC (permalink / raw)
  To: Hugo Villeneuve, Andrzej Hajda, Neil Armstrong, Robert Foss,
	laurent.pinchart, Jonas Karlman, Jernej Skrabec, David Airlie,
	Simona Vetter, Maarten Lankhorst, Maxime Ripard,
	Thomas Zimmermann, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley, Geert Uytterhoeven, Magnus Damm
  Cc: Hugo Villeneuve, dri-devel, devicetree, linux-kernel, linux-renesas-soc

Hi Hugo Villeneuve,

Thanks for your patch.

> -----Original Message-----
> From: Hugo Villeneuve <hugo@hugovil.com>
> Sent: 13 May 2025 17:23
> Subject: [PATCH] dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller
> 
> From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> 
> Allow to inherit valid properties from the dsi-controller. This fixes the following warning when
> adding a panel property:
> 
> rzg2lc.dtb: dsi@10850000: '#address-cells', '#size-cells', 'panel@0' do not
>     match any of the regexes: 'pinctrl-[0-9]+'
>     from schema $id:
>         http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml#
> 
> Also add a panel property to the example.
> 
> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> ---
>  .../bindings/display/bridge/renesas,dsi.yaml  | 21 +++++++++++++++++--
>  1 file changed, 19 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> index e08c24633926b..e0906a46fb118 100644
> --- a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> @@ -128,14 +128,17 @@ required:
>    - power-domains
>    - ports
> 
> -additionalProperties: false
> +unevaluatedProperties: false
> 
>  examples:
>    - |
> +    #include <dt-bindings/gpio/gpio.h>
>      #include <dt-bindings/clock/r9a07g044-cpg.h>
>      #include <dt-bindings/interrupt-controller/arm-gic.h>
> 
>      dsi0: dsi@10850000 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
>          compatible = "renesas,r9a07g044-mipi-dsi", "renesas,rzg2l-mipi-dsi";
>          reg = <0x10850000 0x20000>;
>          interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, @@ -160,6 +163,20 @@ examples:
>          reset-names = "rst", "arst", "prst";
>          power-domains = <&cpg>;
> 
> +        panel@0 {
> +            compatible = "rocktech,jh057n00900";
> +            reg = <0>;
> +            vcc-supply = <&reg_2v8_p>;
> +            iovcc-supply = <&reg_1v8_p>;
> +            reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
> +
> +            port {
> +                panel_in: endpoint {
> +                    remote-endpoint = <&dsi0_out>;
> +                };
> +            };
> +        };
> +
>          ports {
>              #address-cells = <1>;
>              #size-cells = <0>;
> @@ -175,7 +192,7 @@ examples:
>                  reg = <1>;
>                  dsi0_out: endpoint {
>                      data-lanes = <1 2 3 4>;
> -                    remote-endpoint = <&adv7535_in>;
> +                    remote-endpoint = <&panel_in>;

Can we make panel example as separate one?

1) One example for using bridge device
2) One example for using direct panel.

Cheers,
Biju

>                  };
>              };
>          };
> 
> base-commit: e9565e23cd89d4d5cd4388f8742130be1d6f182d
> --
> 2.39.5


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH] dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller
  2025-05-14  6:00 ` Biju Das
@ 2025-05-14 13:48   ` Hugo Villeneuve
  0 siblings, 0 replies; 3+ messages in thread
From: Hugo Villeneuve @ 2025-05-14 13:48 UTC (permalink / raw)
  To: Biju Das
  Cc: Andrzej Hajda, Neil Armstrong, Robert Foss, laurent.pinchart,
	Jonas Karlman, Jernej Skrabec, David Airlie, Simona Vetter,
	Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Geert Uytterhoeven,
	Magnus Damm, Hugo Villeneuve, dri-devel, devicetree,
	linux-kernel, linux-renesas-soc

On Wed, 14 May 2025 06:00:28 +0000
Biju Das <biju.das.jz@bp.renesas.com> wrote:

> Hi Hugo Villeneuve,
> 
> Thanks for your patch.
> 
> > -----Original Message-----
> > From: Hugo Villeneuve <hugo@hugovil.com>
> > Sent: 13 May 2025 17:23
> > Subject: [PATCH] dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller
> > 
> > From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> > 
> > Allow to inherit valid properties from the dsi-controller. This fixes the following warning when
> > adding a panel property:
> > 
> > rzg2lc.dtb: dsi@10850000: '#address-cells', '#size-cells', 'panel@0' do not
> >     match any of the regexes: 'pinctrl-[0-9]+'
> >     from schema $id:
> >         http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml#
> > 
> > Also add a panel property to the example.
> > 
> > Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> > ---
> >  .../bindings/display/bridge/renesas,dsi.yaml  | 21 +++++++++++++++++--
> >  1 file changed, 19 insertions(+), 2 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> > b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> > index e08c24633926b..e0906a46fb118 100644
> > --- a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> > +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
> > @@ -128,14 +128,17 @@ required:
> >    - power-domains
> >    - ports
> > 
> > -additionalProperties: false
> > +unevaluatedProperties: false
> > 
> >  examples:
> >    - |
> > +    #include <dt-bindings/gpio/gpio.h>
> >      #include <dt-bindings/clock/r9a07g044-cpg.h>
> >      #include <dt-bindings/interrupt-controller/arm-gic.h>
> > 
> >      dsi0: dsi@10850000 {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> >          compatible = "renesas,r9a07g044-mipi-dsi", "renesas,rzg2l-mipi-dsi";
> >          reg = <0x10850000 0x20000>;
> >          interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, @@ -160,6 +163,20 @@ examples:
> >          reset-names = "rst", "arst", "prst";
> >          power-domains = <&cpg>;
> > 
> > +        panel@0 {
> > +            compatible = "rocktech,jh057n00900";
> > +            reg = <0>;
> > +            vcc-supply = <&reg_2v8_p>;
> > +            iovcc-supply = <&reg_1v8_p>;
> > +            reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
> > +
> > +            port {
> > +                panel_in: endpoint {
> > +                    remote-endpoint = <&dsi0_out>;
> > +                };
> > +            };
> > +        };
> > +
> >          ports {
> >              #address-cells = <1>;
> >              #size-cells = <0>;
> > @@ -175,7 +192,7 @@ examples:
> >                  reg = <1>;
> >                  dsi0_out: endpoint {
> >                      data-lanes = <1 2 3 4>;
> > -                    remote-endpoint = <&adv7535_in>;
> > +                    remote-endpoint = <&panel_in>;
> 
> Can we make panel example as separate one?
> 
> 1) One example for using bridge device
> 2) One example for using direct panel.

Hi Biju,
sure, will do in V2.

Thank you,
Hugo.


> 
> Cheers,
> Biju
> 
> >                  };
> >              };
> >          };
> > 
> > base-commit: e9565e23cd89d4d5cd4388f8742130be1d6f182d
> > --
> > 2.39.5
> 
> 


-- 
Hugo Villeneuve

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2025-05-14 13:49 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-05-13 16:23 [PATCH] dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller Hugo Villeneuve
2025-05-14  6:00 ` Biju Das
2025-05-14 13:48   ` Hugo Villeneuve

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®