Re: [PATCH v3 04/15] media: rcar-csi2: Move {enable|disable}_streams() calls

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Tomi,

Thank you for the patch.

On Fri, May 30, 2025 at 04:50:33PM +0300, Tomi Valkeinen wrote:
> With multiple streams the operation to enable the CSI-2 hardware and to
> call {enable|disable}_streams() on upstream subdev will need to be
> handled separately.
> 
> Prepare for that by moving {enable|disable}_streams() calls out from
> rcsi2_start() and rcsi2_stop().

Same comments as for 03/15. Maybe this will become clearer in subsequent
patches, but the change should then probably be squashed in those
patches.

> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
> ---
>  drivers/media/platform/renesas/rcar-csi2.c | 17 +++++++++--------
>  1 file changed, 9 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/media/platform/renesas/rcar-csi2.c b/drivers/media/platform/renesas/rcar-csi2.c
> index ddbdde23c122..698eb0e60f32 100644
> --- a/drivers/media/platform/renesas/rcar-csi2.c
> +++ b/drivers/media/platform/renesas/rcar-csi2.c
> @@ -1573,20 +1573,12 @@ static int rcsi2_start(struct rcar_csi2 *priv, struct v4l2_subdev_state *state)
>  		return ret;
>  	}
>  
> -	ret = v4l2_subdev_enable_streams(priv->remote, priv->remote_pad,
> -					 BIT_ULL(0));
> -	if (ret) {
> -		rcsi2_enter_standby(priv);
> -		return ret;
> -	}
> -
>  	return 0;
>  }
>  
>  static void rcsi2_stop(struct rcar_csi2 *priv)
>  {
>  	rcsi2_enter_standby(priv);
> -	v4l2_subdev_disable_streams(priv->remote, priv->remote_pad, BIT_ULL(0));
>  }
>  
>  static int rcsi2_enable_streams(struct v4l2_subdev *sd,
> @@ -1608,6 +1600,13 @@ static int rcsi2_enable_streams(struct v4l2_subdev *sd,
>  			return ret;
>  	}
>  
> +	ret = v4l2_subdev_enable_streams(priv->remote, priv->remote_pad,
> +					 BIT_ULL(0));
> +	if (ret) {
> +		rcsi2_stop(priv);
> +		return ret;
> +	}
> +
>  	priv->stream_count += 1;
>  
>  	return ret;
> @@ -1629,6 +1628,8 @@ static int rcsi2_disable_streams(struct v4l2_subdev *sd,
>  	if (priv->stream_count == 1)
>  		rcsi2_stop(priv);
>  
> +	v4l2_subdev_disable_streams(priv->remote, priv->remote_pad, BIT_ULL(0));
> +
>  	priv->stream_count -= 1;
>  
>  	return ret;

-- 
Regards,

Laurent Pinchart