From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Cc: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>,
"Mauro Carvalho Chehab" <mchehab@kernel.org>,
"Sakari Ailus" <sakari.ailus@linux.intel.com>,
linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-kernel@vger.kernel.org,
"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
"Mauro Carvalho Chehab" <mchehab+huawei@kernel.org>,
"Jacopo Mondi" <jacopo.mondi@ideasonboard.com>
Subject: Re: [PATCH v3 14/15] media: rcar-csi2: Add full streams support
Date: Mon, 2 Jun 2025 16:54:53 +0300 [thread overview]
Message-ID: <20250602135453.GC23515@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20250530-rcar-streams-v3-14-026655df7138@ideasonboard.com>
Hi Tomi,
Thank you for the patch.
On Fri, May 30, 2025 at 04:50:43PM +0300, Tomi Valkeinen wrote:
> Add the missing pieces to enable full streams support:
>
> - Add set_routing
> - Drop the explicit uses of a single stream, and instead use the streams
> mask.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
> ---
> drivers/media/platform/renesas/rcar-csi2.c | 85 ++++++++++++++++++++++--------
> 1 file changed, 63 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/media/platform/renesas/rcar-csi2.c b/drivers/media/platform/renesas/rcar-csi2.c
> index 8f708196ef49..4a73d223229c 100644
> --- a/drivers/media/platform/renesas/rcar-csi2.c
> +++ b/drivers/media/platform/renesas/rcar-csi2.c
> @@ -694,6 +694,17 @@ static const struct rcar_csi2_format rcar_csi2_formats[] = {
> },
> };
>
> +static const struct v4l2_mbus_framefmt rcar_csi2_default_fmt = {
> + .width = 1920,
> + .height = 1080,
> + .code = MEDIA_BUS_FMT_RGB888_1X24,
> + .colorspace = V4L2_COLORSPACE_SRGB,
> + .field = V4L2_FIELD_NONE,
> + .ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT,
> + .quantization = V4L2_QUANTIZATION_DEFAULT,
> + .xfer_func = V4L2_XFER_FUNC_DEFAULT,
> +};
> +
> static const struct rcar_csi2_format *rcsi2_code_to_fmt(unsigned int code)
> {
> unsigned int i;
> @@ -1641,10 +1652,8 @@ static int rcsi2_enable_streams(struct v4l2_subdev *sd,
> u64 source_streams_mask)
> {
> struct rcar_csi2 *priv = sd_to_csi2(sd);
> - int ret = 0;
> -
> - if (source_streams_mask != 1)
> - return -EINVAL;
> + u64 sink_streams;
> + int ret;
>
> if (!priv->remote)
> return -ENODEV;
> @@ -1655,8 +1664,13 @@ static int rcsi2_enable_streams(struct v4l2_subdev *sd,
> return ret;
> }
>
> + sink_streams = v4l2_subdev_state_xlate_streams(state,
> + RCAR_CSI2_SOURCE_VC0,
> + RCAR_CSI2_SINK,
> + &source_streams_mask);
> +
> ret = v4l2_subdev_enable_streams(priv->remote, priv->remote_pad,
> - BIT_ULL(0));
> + sink_streams);
> if (ret) {
> rcsi2_stop(priv);
> return ret;
> @@ -1672,10 +1686,7 @@ static int rcsi2_disable_streams(struct v4l2_subdev *sd,
> u32 source_pad, u64 source_streams_mask)
> {
> struct rcar_csi2 *priv = sd_to_csi2(sd);
> - int ret = 0;
> -
> - if (source_streams_mask != 1)
> - return -EINVAL;
> + u64 sink_streams;
>
> if (!priv->remote)
> return -ENODEV;
> @@ -1683,11 +1694,17 @@ static int rcsi2_disable_streams(struct v4l2_subdev *sd,
> if (priv->stream_count == 1)
> rcsi2_stop(priv);
>
> - v4l2_subdev_disable_streams(priv->remote, priv->remote_pad, BIT_ULL(0));
> + sink_streams = v4l2_subdev_state_xlate_streams(state,
> + RCAR_CSI2_SOURCE_VC0,
> + RCAR_CSI2_SINK,
> + &source_streams_mask);
> +
> + v4l2_subdev_disable_streams(priv->remote, priv->remote_pad,
> + sink_streams);
>
> priv->stream_count -= 1;
>
> - return ret;
> + return 0;
This seems to belong to a previous patch.
> }
>
> static int rcsi2_set_pad_format(struct v4l2_subdev *sd,
> @@ -1720,6 +1737,40 @@ static int rcsi2_set_pad_format(struct v4l2_subdev *sd,
> return 0;
> }
>
> +static int rcsi2_set_routing(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + enum v4l2_subdev_format_whence which,
> + struct v4l2_subdev_krouting *routing)
> +{
> + struct rcar_csi2 *priv = sd_to_csi2(sd);
> + int ret;
> +
> + if (!priv->info->use_isp)
> + return -ENOTTY;
> +
> + if (routing->num_routes > V4L2_FRAME_DESC_ENTRY_MAX)
> + return -EINVAL;
A comment to explain this check would be nice.
> +
> + if (priv->info->use_isp) {
You return an error above when this condition is false.
> + ret = v4l2_subdev_routing_validate(sd, routing,
> + V4L2_SUBDEV_ROUTING_ONLY_1_TO_1);
> + } else {
> + ret = v4l2_subdev_routing_validate(sd, routing,
> + V4L2_SUBDEV_ROUTING_ONLY_1_TO_1 |
> + V4L2_SUBDEV_ROUTING_NO_SOURCE_MULTIPLEXING);
> + }
> +
> + if (ret)
> + return ret;
> +
> + ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing,
> + &rcar_csi2_default_fmt);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> static int rcsi2_get_frame_desc_fallback(struct v4l2_subdev *sd,
> unsigned int pad,
> struct v4l2_mbus_frame_desc *fd)
> @@ -1781,6 +1832,7 @@ static const struct v4l2_subdev_pad_ops rcar_csi2_pad_ops = {
> .set_fmt = rcsi2_set_pad_format,
> .get_fmt = v4l2_subdev_get_fmt,
>
> + .set_routing = rcsi2_set_routing,
> .get_frame_desc = rcsi2_get_frame_desc,
> };
>
> @@ -1801,17 +1853,6 @@ static int rcsi2_init_state(struct v4l2_subdev *sd,
> },
> };
>
> - static const struct v4l2_mbus_framefmt rcar_csi2_default_fmt = {
> - .width = 1920,
> - .height = 1080,
> - .code = MEDIA_BUS_FMT_RGB888_1X24,
> - .colorspace = V4L2_COLORSPACE_SRGB,
> - .field = V4L2_FIELD_NONE,
> - .ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT,
> - .quantization = V4L2_QUANTIZATION_DEFAULT,
> - .xfer_func = V4L2_XFER_FUNC_DEFAULT,
> - };
> -
> static const struct v4l2_subdev_krouting routing = {
> .num_routes = ARRAY_SIZE(routes),
> .routes = routes,
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2025-06-02 13:55 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-30 13:50 [PATCH v3 00/15] media: rcar: Streams support Tomi Valkeinen
2025-05-30 13:50 ` [PATCH v3 01/15] media: rcar-csi2: Use the pad version of v4l2_get_link_freq() Tomi Valkeinen
2025-06-02 9:43 ` Laurent Pinchart
2025-07-02 15:07 ` Niklas Söderlund
2025-07-02 20:51 ` Laurent Pinchart
2025-06-06 11:57 ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 02/15] media: rcar-isp: Improve ISPPROCMODE_DT_PROC_MODE_VC Tomi Valkeinen
2025-06-02 9:43 ` Laurent Pinchart
2025-06-06 11:58 ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 03/15] media: rcar-isp: Move {enable|disable}_streams() calls Tomi Valkeinen
2025-06-02 9:43 ` Laurent Pinchart
2025-09-26 11:22 ` Tomi Valkeinen
2025-09-27 6:17 ` Niklas Söderlund
2025-12-16 12:48 ` Tomi Valkeinen
2025-05-30 13:50 ` [PATCH v3 04/15] media: rcar-csi2: " Tomi Valkeinen
2025-06-02 9:43 ` Laurent Pinchart
2025-05-30 13:50 ` [PATCH v3 05/15] media: rcar-csi2: Move rcar2_calc_mbps() Tomi Valkeinen
2025-06-02 14:03 ` Laurent Pinchart
2025-06-06 12:03 ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 06/15] media: rcar-csi2: Simplify rcsi2_calc_mbps() Tomi Valkeinen
2025-06-02 9:43 ` Laurent Pinchart
2025-06-06 12:02 ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 07/15] media: rcar-csi2: Optimize rcsi2_calc_mbps() Tomi Valkeinen
2025-06-02 9:43 ` Laurent Pinchart
2025-06-06 12:07 ` Niklas Söderlund
2025-12-08 14:03 ` Tomi Valkeinen
2025-05-30 13:50 ` [PATCH v3 08/15] media: rcar-csi2: Switch to Streams API Tomi Valkeinen
2025-06-02 14:06 ` Laurent Pinchart
2025-12-16 13:15 ` Tomi Valkeinen
2025-06-06 12:09 ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 09/15] media: rcar-isp: " Tomi Valkeinen
2025-06-02 14:17 ` Laurent Pinchart
2025-06-06 12:10 ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 10/15] media: rcar-csi2: Add .get_frame_desc op Tomi Valkeinen
2025-06-02 9:44 ` Laurent Pinchart
2025-06-06 12:14 ` Niklas Söderlund
2025-12-16 13:18 ` Tomi Valkeinen
2025-12-16 13:22 ` Tomi Valkeinen
2025-05-30 13:50 ` [PATCH v3 11/15] media: rcar-isp: Call get_frame_desc to find out VC & DT Tomi Valkeinen
2025-06-02 13:22 ` Laurent Pinchart
2025-12-16 11:57 ` Tomi Valkeinen
2025-06-06 12:20 ` Niklas Söderlund
2025-12-16 13:35 ` Tomi Valkeinen
2025-05-30 13:50 ` [PATCH v3 12/15] media: rcar-csi2: Add more stream support to rcsi2_calc_mbps() Tomi Valkeinen
2025-06-02 13:28 ` Laurent Pinchart
2025-12-16 12:45 ` Tomi Valkeinen
2025-06-06 12:25 ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 13/15] media: rcar-csi2: Call get_frame_desc to find out VC & DT (Gen3) Tomi Valkeinen
2025-06-02 13:49 ` Laurent Pinchart
2025-12-16 12:58 ` Tomi Valkeinen
2025-05-30 13:50 ` [PATCH v3 14/15] media: rcar-csi2: Add full streams support Tomi Valkeinen
2025-06-02 13:54 ` Laurent Pinchart [this message]
2025-12-16 13:03 ` Tomi Valkeinen
2025-05-30 13:50 ` [PATCH v3 15/15] media: rcar-isp: " Tomi Valkeinen
2025-06-02 13:57 ` Laurent Pinchart
2025-12-16 13:11 ` Tomi Valkeinen
2025-06-06 12:32 ` [PATCH v3 00/15] media: rcar: Streams support Niklas Söderlund
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250602135453.GC23515@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=jacopo.mondi@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=mchehab+huawei@kernel.org \
--cc=mchehab@kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=niklas.soderlund@ragnatech.se \
--cc=sakari.ailus@linux.intel.com \
--cc=tomi.valkeinen+renesas@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®