[PATCH v3 01/27] clk: mediatek: clk-pll: Add set/clr regs for shared PLL enable control

[Laura Nao <laura.nao@collabora.com>]

On MT8196, there are set/clr registers to control a shared PLL enable
register. These are intended to prevent different masters from
manipulating the PLLs independently. Add the corresponding en_set_reg
and en_clr_reg fields to the mtk_pll_data structure.

Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Laura Nao <laura.nao@collabora.com>
---
 drivers/clk/mediatek/clk-pll.c | 4 ++++
 drivers/clk/mediatek/clk-pll.h | 4 ++++
 2 files changed, 8 insertions(+)

diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c
index ce453e1718e5..49ca25dd5418 100644
--- a/drivers/clk/mediatek/clk-pll.c
+++ b/drivers/clk/mediatek/clk-pll.c
@@ -308,6 +308,10 @@ struct clk_hw *mtk_clk_register_pll_ops(struct mtk_clk_pll *pll,
 		pll->en_addr = base + data->en_reg;
 	else
 		pll->en_addr = pll->base_addr + REG_CON0;
+	if (data->en_set_reg)
+		pll->en_set_addr = base + data->en_set_reg;
+	if (data->en_clr_reg)
+		pll->en_clr_addr = base + data->en_clr_reg;
 	pll->hw.init = &init;
 	pll->data = data;
 
diff --git a/drivers/clk/mediatek/clk-pll.h b/drivers/clk/mediatek/clk-pll.h
index 285c8db958b3..c4d06bb11516 100644
--- a/drivers/clk/mediatek/clk-pll.h
+++ b/drivers/clk/mediatek/clk-pll.h
@@ -47,6 +47,8 @@ struct mtk_pll_data {
 	const struct mtk_pll_div_table *div_table;
 	const char *parent_name;
 	u32 en_reg;
+	u32 en_set_reg;
+	u32 en_clr_reg;
 	u8 pll_en_bit; /* Assume 0, indicates BIT(0) by default */
 	u8 pcw_chg_bit;
 };
@@ -68,6 +70,8 @@ struct mtk_clk_pll {
 	void __iomem	*pcw_addr;
 	void __iomem	*pcw_chg_addr;
 	void __iomem	*en_addr;
+	void __iomem	*en_set_addr;
+	void __iomem	*en_clr_addr;
 	const struct mtk_pll_data *data;
 };
 
-- 
2.39.5