From: Sven Peter <sven@kernel.org>
To: Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Janne Grunau <j@jannau.net>, Neal Gompa <neal@gompa.dev>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
asahi@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
Sven Peter <sven@kernel.org>
Subject: [PATCH 06/11] usb: typec: tipd: Read USB4, Thunderbolt and DisplayPort status for cd321x
Date: Sun, 14 Sep 2025 12:56:11 +0000 [thread overview]
Message-ID: <20250914-apple-usb3-tipd-v1-6-4e99c8649024@kernel.org> (raw)
In-Reply-To: <20250914-apple-usb3-tipd-v1-0-4e99c8649024@kernel.org>
CD321x supports various alternate modes and stores information once
these are entered into separate status registers. Read those when they
are active when reading TPS_DATA_STATUS to prepare supporting these.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
---
drivers/usb/typec/tipd/core.c | 80 ++++++++++++++++++++++++++++++++++++++++---
1 file changed, 76 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
index 51b0f3be8b66a743ddc3ea96c1b25f597a1e8f6c..afd11b3e1ae596c7f3283e4336aaa57874c9378d 100644
--- a/drivers/usb/typec/tipd/core.c
+++ b/drivers/usb/typec/tipd/core.c
@@ -35,14 +35,18 @@
#define TPS_REG_INT_MASK2 0x17
#define TPS_REG_INT_CLEAR1 0x18
#define TPS_REG_INT_CLEAR2 0x19
-#define TPS_REG_SYSTEM_POWER_STATE 0x20
#define TPS_REG_STATUS 0x1a
+#define TPS_REG_SYSTEM_POWER_STATE 0x20
+#define TPS_REG_USB4_STATUS 0x24
#define TPS_REG_SYSTEM_CONF 0x28
#define TPS_REG_CTRL_CONF 0x29
#define TPS_REG_BOOT_STATUS 0x2D
#define TPS_REG_POWER_STATUS 0x3f
#define TPS_REG_PD_STATUS 0x40
#define TPS_REG_RX_IDENTITY_SOP 0x48
+#define TPS_REG_CF_VID_STATUS 0x5e
+#define TPS_REG_DP_SID_STATUS 0x58
+#define TPS_REG_INTEL_VID_STATUS 0x59
#define TPS_REG_DATA_STATUS 0x5f
#define TPS_REG_SLEEP_CONF 0x70
@@ -85,6 +89,31 @@ struct tps6598x_rx_identity_reg {
struct usb_pd_identity identity;
} __packed;
+/* TPS_REG_USB4_STATUS */
+struct tps6598x_usb4_status_reg {
+ u8 mode_status;
+ __le32 eudo;
+ __le32 unknown;
+} __packed;
+
+/* TPS_REG_DP_SID_STATUS */
+struct tps6598x_dp_sid_status_reg {
+ u8 mode_status;
+ __le32 status_tx;
+ __le32 status_rx;
+ __le32 configure;
+ __le32 mode_data;
+} __packed;
+
+/* TPS_REG_INTEL_VID_STATUS */
+struct tps6598x_intel_vid_status_reg {
+ u8 mode_status;
+ __le32 attention_vdo;
+ __le16 enter_vdo;
+ __le16 device_mode;
+ __le16 cable_mode;
+} __packed;
+
/* Standard Task return codes */
#define TPS_TASK_TIMEOUT 1
#define TPS_TASK_REJECTED 3
@@ -121,6 +150,7 @@ struct tipd_data {
int (*apply_patch)(struct tps6598x *tps);
int (*init)(struct tps6598x *tps);
int (*switch_power_state)(struct tps6598x *tps, u8 target_state);
+ bool (*read_data_status)(struct tps6598x *tps);
int (*reset)(struct tps6598x *tps);
};
@@ -151,6 +181,10 @@ struct tps6598x {
struct cd321x {
struct tps6598x tps;
+
+ struct tps6598x_dp_sid_status_reg dp_sid_status;
+ struct tps6598x_intel_vid_status_reg intel_vid_status;
+ struct tps6598x_usb4_status_reg usb4_status;
};
static enum power_supply_property tps6598x_psy_props[] = {
@@ -505,6 +539,41 @@ static bool tps6598x_read_data_status(struct tps6598x *tps)
return true;
}
+static bool cd321x_read_data_status(struct tps6598x *tps)
+{
+ struct cd321x *cd321x = container_of(tps, struct cd321x, tps);
+ int ret;
+
+ ret = tps6598x_read_data_status(tps);
+ if (ret < 0)
+ return false;
+
+ if (tps->data_status & TPS_DATA_STATUS_DP_CONNECTION) {
+ ret = tps6598x_block_read(tps, TPS_REG_DP_SID_STATUS,
+ &cd321x->dp_sid_status, sizeof(cd321x->dp_sid_status));
+ if (ret)
+ dev_err(tps->dev, "Failed to read DP SID Status: %d\n",
+ ret);
+ }
+
+ if (tps->data_status & TPS_DATA_STATUS_TBT_CONNECTION) {
+ ret = tps6598x_block_read(tps, TPS_REG_INTEL_VID_STATUS,
+ &cd321x->intel_vid_status, sizeof(cd321x->intel_vid_status));
+ if (ret)
+ dev_err(tps->dev, "Failed to read Intel VID Status: %d\n", ret);
+ }
+
+ if (tps->data_status & CD321X_DATA_STATUS_USB4_CONNECTION) {
+ ret = tps6598x_block_read(tps, TPS_REG_USB4_STATUS,
+ &cd321x->usb4_status, sizeof(cd321x->usb4_status));
+ if (ret)
+ dev_err(tps->dev,
+ "Failed to read USB4 Status: %d\n", ret);
+ }
+
+ return true;
+}
+
static bool tps6598x_read_power_status(struct tps6598x *tps)
{
u16 pwr_status;
@@ -565,7 +634,7 @@ static irqreturn_t cd321x_interrupt(int irq, void *data)
goto err_unlock;
if (event & APPLE_CD_REG_INT_DATA_STATUS_UPDATE)
- if (!tps6598x_read_data_status(tps))
+ if (!tps->data->read_data_status(tps))
goto err_unlock;
/* Handle plug insert or removal */
@@ -614,7 +683,7 @@ static irqreturn_t tps25750_interrupt(int irq, void *data)
goto err_clear_ints;
if (event[0] & TPS_REG_INT_DATA_STATUS_UPDATE)
- if (!tps6598x_read_data_status(tps))
+ if (!tps->data->read_data_status(tps))
goto err_clear_ints;
/*
@@ -688,7 +757,7 @@ static irqreturn_t tps6598x_interrupt(int irq, void *data)
goto err_unlock;
if ((event1[0] | event2[0]) & TPS_REG_INT_DATA_STATUS_UPDATE)
- if (!tps6598x_read_data_status(tps))
+ if (!tps->data->read_data_status(tps))
goto err_unlock;
/* Handle plug insert or removal */
@@ -1534,6 +1603,7 @@ static const struct tipd_data cd321x_data = {
.trace_power_status = trace_tps6598x_power_status,
.trace_status = trace_tps6598x_status,
.init = cd321x_init,
+ .read_data_status = cd321x_read_data_status,
.reset = cd321x_reset,
.switch_power_state = cd321x_switch_power_state,
};
@@ -1550,6 +1620,7 @@ static const struct tipd_data tps6598x_data = {
.trace_status = trace_tps6598x_status,
.apply_patch = tps6598x_apply_patch,
.init = tps6598x_init,
+ .read_data_status = tps6598x_read_data_status,
.reset = tps6598x_reset,
};
@@ -1565,6 +1636,7 @@ static const struct tipd_data tps25750_data = {
.trace_status = trace_tps25750_status,
.apply_patch = tps25750_apply_patch,
.init = tps25750_init,
+ .read_data_status = tps6598x_read_data_status,
.reset = tps25750_reset,
};
--
2.34.1
next prev parent reply other threads:[~2025-09-14 12:56 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-14 12:56 [PATCH 00/11] Apple Silicon USB3 support - TIPD changes Sven Peter
2025-09-14 12:56 ` [PATCH 01/11] usb: typec: tipd: Clear interrupts first Sven Peter
2025-09-14 12:56 ` [PATCH 02/11] usb: typec: tipd: Move initial irq mask to tipd_data Sven Peter
2025-09-14 12:56 ` [PATCH 03/11] usb: typec: tipd: Move switch_power_state " Sven Peter
2025-09-14 12:56 ` [PATCH 04/11] usb: typec: tipd: Trace data status for CD321x correctly Sven Peter
2025-09-14 12:56 ` [PATCH 05/11] usb: typec: tipd: Add cd321x struct with separate size Sven Peter
2025-09-14 12:56 ` Sven Peter [this message]
2025-09-14 12:56 ` [PATCH 07/11] usb: typec: tipd: Register DisplayPort and Thunderbolt altmodes for cd321x Sven Peter
2025-09-14 12:56 ` [PATCH 08/11] usb: typec: tipd: Update partner identity when power status was updated Sven Peter
2025-09-15 13:14 ` Heikki Krogerus
2025-09-14 12:56 ` [PATCH 09/11] usb: typec: tipd: Use read_power_status function in probe Sven Peter
2025-09-14 12:56 ` [PATCH 10/11] usb: typec: tipd: Read data status in probe and cache its value Sven Peter
2025-09-14 12:56 ` [PATCH 11/11] usb: typec: tipd: Handle mode transitions for CD321x Sven Peter
2025-09-14 13:29 ` Janne Grunau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250914-apple-usb3-tipd-v1-6-4e99c8649024@kernel.org \
--to=sven@kernel.org \
--cc=asahi@lists.linux.dev \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=j@jannau.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=neal@gompa.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®