[PATCH 6/6] mailbox: pcc: Clear any pending responder interrupts before enabling it

[Sudeep Holla <sudeep.holla@arm.com>]

Some platforms may leave a responder interrupt pending from earlier
transactions. If a PCC responder channel has a pending interrupt when
the controller starts up, enabling the IRQ line without first clearing
the condition can lead to a spurious interrupt which could disrupt other
transmissions if the IRQ is shared.

Explicitly clear any pending responder interrupt before enabling the IRQ
to ensure a clean start. Acknowledge the responder channel via
pcc_chan_acknowledge() in startup before requesting/enablement of the
IRQ. This ensures a clean baseline for the first transfer/receiption
of the notification/response.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 drivers/mailbox/pcc.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/mailbox/pcc.c b/drivers/mailbox/pcc.c
index 2829ec51b47f..418007020439 100644
--- a/drivers/mailbox/pcc.c
+++ b/drivers/mailbox/pcc.c
@@ -468,6 +468,12 @@ static int pcc_startup(struct mbox_chan *chan)
 	unsigned long irqflags;
 	int rc;
 
+	/*
+	 * Clear and acknowledge any pending interrupts on responder channel
+	 * before enabling the interrupt
+	 */
+	pcc_chan_acknowledge(pchan);
+
 	if (pchan->plat_irq > 0) {
 		irqflags = pcc_chan_plat_irq_can_be_shared(pchan) ?
 						IRQF_SHARED | IRQF_ONESHOT : 0;

-- 
2.34.1