From: Ryan Roberts <ryan.roberts@arm.com>
To: Will Deacon <will@kernel.org>, Ard Biesheuvel <ardb@kernel.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Linus Torvalds <torvalds@linux-foundation.org>,
Oliver Upton <oliver.upton@linux.dev>,
Marc Zyngier <maz@kernel.org>, Dev Jain <dev.jain@arm.com>,
Linu Cherian <Linu.Cherian@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v1 12/13] arm64: mm: Wrap flush_tlb_page() around ___flush_tlb_range()
Date: Tue, 16 Dec 2025 14:45:57 +0000 [thread overview]
Message-ID: <20251216144601.2106412-13-ryan.roberts@arm.com> (raw)
In-Reply-To: <20251216144601.2106412-1-ryan.roberts@arm.com>
Flushing a page from the tlb is just a special case of flushing a range.
So let's rework flush_tlb_page() so that it simply wraps
___flush_tlb_range(). While at it, let's also update the API to take the
same flags that we use when flushing a range. This allows us to delete
all the ugly "_nosync", "_local" and "_nonotify" variants.
Thanks to constant folding, all of the complex looping and tlbi-by-range
options get eliminated so that the generated code for flush_tlb_page()
looks very similar to the previous version.
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
---
arch/arm64/include/asm/pgtable.h | 6 +--
arch/arm64/include/asm/tlbflush.h | 81 ++++++++++---------------------
arch/arm64/mm/fault.c | 2 +-
3 files changed, 29 insertions(+), 60 deletions(-)
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index 736747fbc843..b96a7ca465a1 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -136,10 +136,10 @@ static inline void arch_leave_lazy_mmu_mode(void)
* entries exist.
*/
#define flush_tlb_fix_spurious_fault(vma, address, ptep) \
- local_flush_tlb_page_nonotify(vma, address)
+ __flush_tlb_page(vma, address, TLBF_NOBROADCAST | TLBF_NONOTIFY)
#define flush_tlb_fix_spurious_fault_pmd(vma, address, pmdp) \
- local_flush_tlb_page_nonotify(vma, address)
+ __flush_tlb_page(vma, address, TLBF_NOBROADCAST | TLBF_NONOTIFY)
/*
* ZERO_PAGE is a global shared page that is always zero: used
@@ -1351,7 +1351,7 @@ static inline int __ptep_clear_flush_young(struct vm_area_struct *vma,
* context-switch, which provides a DSB to complete the TLB
* invalidation.
*/
- flush_tlb_page_nosync(vma, address);
+ __flush_tlb_page(vma, address, TLBF_NOSYNC);
}
return young;
diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h
index ee747e66bbef..fa5aee990742 100644
--- a/arch/arm64/include/asm/tlbflush.h
+++ b/arch/arm64/include/asm/tlbflush.h
@@ -256,10 +256,7 @@ static inline void __tlbi_level(tlbi_op op, u64 addr, u32 level)
* unmapping pages from vmalloc/io space.
*
* flush_tlb_page(vma, addr)
- * Invalidate a single user mapping for address 'addr' in the
- * address space corresponding to 'vma->mm'. Note that this
- * operation only invalidates a single, last-level page-table
- * entry and therefore does not affect any walk-caches.
+ * Equivalent to __flush_tlb_page(..., flags=TLBF_NONE)
*
*
* Next, we have some undocumented invalidation routines that you probably
@@ -287,13 +284,14 @@ static inline void __tlbi_level(tlbi_op op, u64 addr, u32 level)
* TLBF_NOSYNC (don't issue trailing dsb) and TLBF_NOBROADCAST
* (only perform the invalidation for the local cpu).
*
- * local_flush_tlb_page(vma, addr)
- * Local variant of flush_tlb_page(). Stale TLB entries may
- * remain in remote CPUs.
- *
- * local_flush_tlb_page_nonotify(vma, addr)
- * Same as local_flush_tlb_page() except MMU notifier will not be
- * called.
+ * __flush_tlb_page(vma, addr, flags)
+ * Invalidate a single user mapping for address 'addr' in the
+ * address space corresponding to 'vma->mm'. Note that this
+ * operation only invalidates a single, last-level page-table entry
+ * and therefore does not affect any walk-caches. flags may contain
+ * any combination of TLBF_NONOTIFY (don't call mmu notifiers),
+ * TLBF_NOSYNC (don't issue trailing dsb) and TLBF_NOBROADCAST
+ * (only perform the invalidation for the local cpu).
*
* Finally, take a look at asm/tlb.h to see how tlb_flush() is implemented
* on top of these routines, since that is our interface to the mmu_gather
@@ -327,51 +325,6 @@ static inline void flush_tlb_mm(struct mm_struct *mm)
mmu_notifier_arch_invalidate_secondary_tlbs(mm, 0, -1UL);
}
-static inline void __local_flush_tlb_page_nonotify_nosync(struct mm_struct *mm,
- unsigned long uaddr)
-{
- dsb(nshst);
- __tlbi_level_asid(vale1, uaddr, TLBI_TTL_UNKNOWN, ASID(mm));
-}
-
-static inline void local_flush_tlb_page_nonotify(struct vm_area_struct *vma,
- unsigned long uaddr)
-{
- __local_flush_tlb_page_nonotify_nosync(vma->vm_mm, uaddr);
- dsb(nsh);
-}
-
-static inline void local_flush_tlb_page(struct vm_area_struct *vma,
- unsigned long uaddr)
-{
- __local_flush_tlb_page_nonotify_nosync(vma->vm_mm, uaddr);
- mmu_notifier_arch_invalidate_secondary_tlbs(vma->vm_mm, uaddr & PAGE_MASK,
- (uaddr & PAGE_MASK) + PAGE_SIZE);
- dsb(nsh);
-}
-
-static inline void __flush_tlb_page_nosync(struct mm_struct *mm,
- unsigned long uaddr)
-{
- dsb(ishst);
- __tlbi_level_asid(vale1is, uaddr, TLBI_TTL_UNKNOWN, ASID(mm));
- mmu_notifier_arch_invalidate_secondary_tlbs(mm, uaddr & PAGE_MASK,
- (uaddr & PAGE_MASK) + PAGE_SIZE);
-}
-
-static inline void flush_tlb_page_nosync(struct vm_area_struct *vma,
- unsigned long uaddr)
-{
- return __flush_tlb_page_nosync(vma->vm_mm, uaddr);
-}
-
-static inline void flush_tlb_page(struct vm_area_struct *vma,
- unsigned long uaddr)
-{
- flush_tlb_page_nosync(vma, uaddr);
- dsb(ish);
-}
-
static inline bool arch_tlbbatch_should_defer(struct mm_struct *mm)
{
/*
@@ -618,6 +571,22 @@ static inline void flush_tlb_range(struct vm_area_struct *vma,
__flush_tlb_range(vma, start, end, PAGE_SIZE, TLBI_TTL_UNKNOWN, TLBF_NONE);
}
+static inline void __flush_tlb_page(struct vm_area_struct *vma,
+ unsigned long uaddr, tlbf_t flags)
+{
+ unsigned long start = round_down(uaddr, PAGE_SIZE);
+ unsigned long end = start + PAGE_SIZE;
+
+ ___flush_tlb_range(vma, start, end, PAGE_SIZE, TLBI_TTL_UNKNOWN,
+ TLBF_NOWALKCACHE | flags);
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+ unsigned long uaddr)
+{
+ __flush_tlb_page(vma, uaddr, TLBF_NONE);
+}
+
static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end)
{
const unsigned long stride = PAGE_SIZE;
diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index be9dab2c7d6a..f91aa686f142 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -239,7 +239,7 @@ int __ptep_set_access_flags(struct vm_area_struct *vma,
* flush_tlb_fix_spurious_fault().
*/
if (dirty)
- local_flush_tlb_page(vma, address);
+ __flush_tlb_page(vma, address, TLBF_NOBROADCAST);
return 1;
}
--
2.43.0
next prev parent reply other threads:[~2025-12-16 14:46 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-16 14:45 [PATCH v1 00/13] arm64: Refactor TLB invalidation API and implementation Ryan Roberts
2025-12-16 14:45 ` [PATCH v1 01/13] arm64: mm: Re-implement the __tlbi_level macro as a C function Ryan Roberts
2025-12-16 17:53 ` Jonathan Cameron
2026-01-02 14:18 ` Ryan Roberts
2026-01-05 5:30 ` Linu Cherian
2026-01-05 17:09 ` Ryan Roberts
2025-12-16 14:45 ` [PATCH v1 02/13] arm64: mm: Introduce a C wrapper for by-range TLB invalidation Ryan Roberts
2026-01-05 5:33 ` Linu Cherian
2026-01-05 17:12 ` Ryan Roberts
2025-12-16 14:45 ` [PATCH v1 03/13] arm64: mm: Implicitly invalidate user ASID based on TLBI operation Ryan Roberts
2025-12-16 18:01 ` Jonathan Cameron
2026-01-02 14:20 ` Ryan Roberts
2025-12-18 6:30 ` Linu Cherian
2025-12-18 7:05 ` Linu Cherian
2025-12-18 15:47 ` Linu Cherian
2026-01-02 14:30 ` Ryan Roberts
2026-01-05 13:03 ` Linu Cherian
2026-01-05 5:34 ` Linu Cherian
2026-01-05 17:13 ` Ryan Roberts
2025-12-16 14:45 ` [PATCH v1 04/13] arm64: mm: Push __TLBI_VADDR() into __tlbi_level() Ryan Roberts
2026-01-05 5:35 ` Linu Cherian
2025-12-16 14:45 ` [PATCH v1 05/13] arm64: mm: Inline __TLBI_VADDR_RANGE() into __tlbi_range() Ryan Roberts
2026-01-05 5:35 ` Linu Cherian
2025-12-16 14:45 ` [PATCH v1 06/13] arm64: mm: Re-implement the __flush_tlb_range_op macro in C Ryan Roberts
2025-12-16 14:45 ` [PATCH v1 07/13] arm64: mm: Simplify __TLBI_RANGE_NUM() macro Ryan Roberts
2025-12-16 14:45 ` [PATCH v1 08/13] arm64: mm: Simplify __flush_tlb_range_limit_excess() Ryan Roberts
2025-12-17 8:12 ` Dev Jain
2026-01-02 15:23 ` Ryan Roberts
2025-12-16 14:45 ` [PATCH v1 09/13] arm64: mm: Refactor flush_tlb_page() to use __tlbi_level_asid() Ryan Roberts
2026-01-06 3:25 ` Linu Cherian
2025-12-16 14:45 ` [PATCH v1 10/13] arm64: mm: Refactor __flush_tlb_range() to take flags Ryan Roberts
2026-01-06 4:51 ` Linu Cherian
2025-12-16 14:45 ` [PATCH v1 11/13] arm64: mm: More flags for __flush_tlb_range() Ryan Roberts
2026-01-06 15:28 ` Linu Cherian
2026-01-12 11:52 ` Ryan Roberts
2026-01-07 3:21 ` Linu Cherian
2026-01-12 12:00 ` Ryan Roberts
2025-12-16 14:45 ` Ryan Roberts [this message]
2026-01-07 9:57 ` [PATCH v1 12/13] arm64: mm: Wrap flush_tlb_page() around ___flush_tlb_range() Linu Cherian
2025-12-16 14:45 ` [PATCH v1 13/13] arm64: mm: Provide level hint for flush_tlb_page() Ryan Roberts
2026-01-07 14:44 ` Linu Cherian
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251216144601.2106412-13-ryan.roberts@arm.com \
--to=ryan.roberts@arm.com \
--cc=Linu.Cherian@arm.com \
--cc=ardb@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=dev.jain@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=maz@kernel.org \
--cc=oliver.upton@linux.dev \
--cc=torvalds@linux-foundation.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®