[PATCH v4 2/9] spi: dt-bindings: add spi-{tx,rx}-lane-map properties

[David Lechner <dlechner@baylibre.com>]

Add spi-tx-lane-map and spi-rx-lane-map properties to the SPI peripheral
device tree binding. These properties allow specifying the mapping of
peripheral data lanes to controller data lanes. This is needed e.g. when
some lanes are skipped on the controller side so that the controller
can correctly route data to/from the peripheral.

Signed-off-by: David Lechner <dlechner@baylibre.com>
---

v4 changes:
- This replaces the data-lanes property from the previous revision. Now
  there are separate properties for tx and rx lane maps. And instead of
  being the primary property for determining the number of lanes, this
  is only needed in special cases where the mapping is non-trivial.
---
 .../devicetree/bindings/spi/spi-peripheral-props.yaml      | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
index 59ddead7da14..2f278f145f78 100644
--- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
@@ -75,6 +75,13 @@ properties:
       enum: [0, 1, 2, 4, 8]
     default: [1]
 
+  spi-rx-lane-map:
+    description: Mapping of peripheral RX lanes to controller RX lanes.
+      Each index in the array represents a peripheral RX lane, and the value
+      at that index represents the corresponding controller RX lane.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    default: [0, 1, 2, 3, 4, 5, 6, 7]
+
   spi-rx-delay-us:
     description:
       Delay, in microseconds, after a read transfer.
@@ -99,6 +106,13 @@ properties:
       enum: [0, 1, 2, 4, 8]
     default: [1]
 
+  spi-tx-lane-map:
+    description: Mapping of peripheral TX lanes to controller TX lanes.
+      Each index in the array represents a peripheral TX lane, and the value
+      at that index represents the corresponding controller TX lane.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    default: [0, 1, 2, 3, 4, 5, 6, 7]
+
   spi-tx-delay-us:
     description:
       Delay, in microseconds, after a write transfer.

-- 
2.43.0