From: Hans de Goede <johannes.goede@oss.qualcomm.com>
To: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Hans de Goede <johannes.goede@oss.qualcomm.com>
Subject: [PATCH v5 11/14] media: mt9m114: Don't allow changing the IFP crop/compose selections when bypassing the scaler
Date: Tue, 30 Dec 2025 18:03:08 +0100 [thread overview]
Message-ID: <20251230-mt9m114-atomisp-v5-11-763539e76094@oss.qualcomm.com> (raw)
In-Reply-To: <20251230-mt9m114-atomisp-v5-0-763539e76094@oss.qualcomm.com>
The scaler is bypassed when the ISP source/output pad's pixel-format is
set to MEDIA_BUS_FMT_SGRBG10_1X10. Don't allow changing the IFP crop and/or
compose selections when in this mode.
Instead of returning -EINVAL simply return the current (noop) crop and
compose rectangles.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
---
Changes in v4:
- Move crop = v4l2_subdev_state_get_crop(state, 0); up a couple of lines
to avoid having to call it twice
Changes in v3:
- This is a new patch in v3 of this patch-set, which comes from splitting
up "media: mt9m114: Fix scaler bypass mode" into multiple patches
- Add src_format local variable
---
drivers/media/i2c/mt9m114.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/media/i2c/mt9m114.c b/drivers/media/i2c/mt9m114.c
index d111f9e45d2d9c47de315d06ee8a6adb28700146..5e0fbc34921023e1e7a69ec3d098f936eba93ebb 100644
--- a/drivers/media/i2c/mt9m114.c
+++ b/drivers/media/i2c/mt9m114.c
@@ -1984,7 +1984,7 @@ static int mt9m114_ifp_set_selection(struct v4l2_subdev *sd,
struct v4l2_subdev_state *state,
struct v4l2_subdev_selection *sel)
{
- struct v4l2_mbus_framefmt *format;
+ struct v4l2_mbus_framefmt *format, *src_format;
struct v4l2_rect *crop;
struct v4l2_rect *compose;
unsigned int border;
@@ -1997,8 +1997,16 @@ static int mt9m114_ifp_set_selection(struct v4l2_subdev *sd,
if (sel->pad != 0)
return -EINVAL;
- format = v4l2_subdev_state_get_format(state, 0);
crop = v4l2_subdev_state_get_crop(state, 0);
+
+ /* Crop and compose cannot be changed when bypassing the scaler. */
+ src_format = v4l2_subdev_state_get_format(state, 1);
+ if (src_format->code == MEDIA_BUS_FMT_SGRBG10_1X10) {
+ sel->r = *crop;
+ return 0;
+ }
+
+ format = v4l2_subdev_state_get_format(state, 0);
compose = v4l2_subdev_state_get_compose(state, 0);
if (sel->target == V4L2_SEL_TGT_CROP) {
@@ -2043,9 +2051,8 @@ static int mt9m114_ifp_set_selection(struct v4l2_subdev *sd,
}
/* Propagate the compose rectangle to the source format. */
- format = v4l2_subdev_state_get_format(state, 1);
- format->width = compose->width;
- format->height = compose->height;
+ src_format->width = compose->width;
+ src_format->height = compose->height;
return 0;
}
--
2.52.0
next prev parent reply other threads:[~2025-12-30 17:03 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-30 17:02 [PATCH v5 00/14] media: mt9m114: Changes to make it work with atomisp devices Hans de Goede
2025-12-30 17:02 ` [PATCH v5 01/14] media: aptina-pll: Debug log p1 min and max values Hans de Goede
2025-12-30 17:02 ` [PATCH v5 02/14] media: mt9m114: Use aptina-PLL helper to get PLL values Hans de Goede
2025-12-31 0:29 ` Laurent Pinchart
2025-12-30 17:03 ` [PATCH v5 03/14] media: mt9m114: Lower minimum vblank value Hans de Goede
2025-12-30 17:03 ` [PATCH v5 04/14] media: mt9m114: Fix default hblank and vblank values Hans de Goede
2025-12-30 17:03 ` [PATCH v5 05/14] media: mt9m114: Tweak default hblank and vblank for more accurate fps Hans de Goede
2025-12-30 17:03 ` [PATCH v5 06/14] media: mt9m114: Avoid a reset low spike during probe() Hans de Goede
2025-12-30 17:03 ` [PATCH v5 07/14] media: mt9m114: Put sensor in reset on power down Hans de Goede
2025-12-30 17:03 ` [PATCH v5 08/14] media: mt9m114: Add and use mt9m114_ifp_get_border() helper function Hans de Goede
2025-12-30 17:03 ` [PATCH v5 09/14] media: mt9m114: Adjust IFP selections and source format when source format changes to/from RAW10 Hans de Goede
2025-12-30 17:03 ` [PATCH v5 10/14] media: mt9m114: Update source pad selection and format when sink pad format changes Hans de Goede
2025-12-30 17:03 ` Hans de Goede [this message]
2025-12-30 17:03 ` [PATCH v5 12/14] media: mt9m114: Drop start-, stop-streaming sequence from initialize Hans de Goede
2025-12-30 17:03 ` [PATCH v5 13/14] media: mt9m114: Return -EPROBE_DEFER if no endpoint is found Hans de Goede
2025-12-30 17:03 ` [PATCH v5 14/14] media: mt9m114: Add ACPI enumeration support Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251230-mt9m114-atomisp-v5-11-763539e76094@oss.qualcomm.com \
--to=johannes.goede@oss.qualcomm.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®