[PATCH 01/13] ARM: dts: broadcom: bcm2711: Fix 'simple-bus' node names

["Rob Herring (Arm)" <robh@kernel.org>]

Fix 'simple-bus' node names to follow the defined pattern. Nodes with 'reg'
or 'ranges' addresses should also have a unit-address.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm/boot/dts/broadcom/bcm2711.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/broadcom/bcm2711.dtsi b/arch/arm/boot/dts/broadcom/bcm2711.dtsi
index c06d9f5e53c8..5e3b4bb39396 100644
--- a/arch/arm/boot/dts/broadcom/bcm2711.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2711.dtsi
@@ -415,7 +415,7 @@ ddc1: i2c@7ef09500 {
 	 * The firmware will find whether the emmc2bus alias is defined, and if
 	 * so, it'll edit the dma-ranges property below accordingly.
 	 */
-	emmc2bus: emmc2bus {
+	emmc2bus: emmc2-bus@fe000000 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
@@ -542,7 +542,7 @@ l2: l2-cache0 {
 		};
 	};
 
-	scb {
+	scb-bus@fc000000 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;

-- 
2.51.0