From: "Rob Herring (Arm)" <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Florian Fainelli <florian.fainelli@broadcom.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@broadcom.com>,
Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>
Cc: devicetree@vger.kernel.org, linux-rpi-kernel@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 07/13] arm64: dts: broadcom: stingray: Move raid nodes out of bus
Date: Tue, 06 Jan 2026 20:09:46 -0600 [thread overview]
Message-ID: <20260106-dt-dtbs-broadcom-fixes-v1-7-ba45874e4553@kernel.org> (raw)
In-Reply-To: <20260106-dt-dtbs-broadcom-fixes-v1-0-ba45874e4553@kernel.org>
The 'raid' nodes are not MMIO devices and are not part of a bus, so move
them to the root level. Drop the unit-addresses as they don't have any
address.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
.../boot/dts/broadcom/stingray/stingray-fs4.dtsi | 112 ++++++++++-----------
1 file changed, 56 insertions(+), 56 deletions(-)
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi
index cf3cb9199ce4..d704c4ab2147 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi
@@ -51,68 +51,68 @@ raid_mbox: raid_mbox@400000 {
msi-parent = <&gic_its 0x4300>;
#mbox-cells = <3>;
};
+ };
- raid0: raid@0 {
- compatible = "brcm,iproc-sba-v2";
- mboxes = <&raid_mbox 0 0x1 0xff00>,
- <&raid_mbox 1 0x1 0xff00>,
- <&raid_mbox 2 0x1 0xff00>,
- <&raid_mbox 3 0x1 0xff00>;
- };
+ raid0: raid-0 {
+ compatible = "brcm,iproc-sba-v2";
+ mboxes = <&raid_mbox 0 0x1 0xff00>,
+ <&raid_mbox 1 0x1 0xff00>,
+ <&raid_mbox 2 0x1 0xff00>,
+ <&raid_mbox 3 0x1 0xff00>;
+ };
- raid1: raid@1 {
- compatible = "brcm,iproc-sba-v2";
- mboxes = <&raid_mbox 4 0x1 0xff00>,
- <&raid_mbox 5 0x1 0xff00>,
- <&raid_mbox 6 0x1 0xff00>,
- <&raid_mbox 7 0x1 0xff00>;
- };
+ raid1: raid-1 {
+ compatible = "brcm,iproc-sba-v2";
+ mboxes = <&raid_mbox 4 0x1 0xff00>,
+ <&raid_mbox 5 0x1 0xff00>,
+ <&raid_mbox 6 0x1 0xff00>,
+ <&raid_mbox 7 0x1 0xff00>;
+ };
- raid2: raid@2 {
- compatible = "brcm,iproc-sba-v2";
- mboxes = <&raid_mbox 8 0x1 0xff00>,
- <&raid_mbox 9 0x1 0xff00>,
- <&raid_mbox 10 0x1 0xff00>,
- <&raid_mbox 11 0x1 0xff00>;
- };
+ raid2: raid-2 {
+ compatible = "brcm,iproc-sba-v2";
+ mboxes = <&raid_mbox 8 0x1 0xff00>,
+ <&raid_mbox 9 0x1 0xff00>,
+ <&raid_mbox 10 0x1 0xff00>,
+ <&raid_mbox 11 0x1 0xff00>;
+ };
- raid3: raid@3 {
- compatible = "brcm,iproc-sba-v2";
- mboxes = <&raid_mbox 12 0x1 0xff00>,
- <&raid_mbox 13 0x1 0xff00>,
- <&raid_mbox 14 0x1 0xff00>,
- <&raid_mbox 15 0x1 0xff00>;
- };
+ raid3: raid-3 {
+ compatible = "brcm,iproc-sba-v2";
+ mboxes = <&raid_mbox 12 0x1 0xff00>,
+ <&raid_mbox 13 0x1 0xff00>,
+ <&raid_mbox 14 0x1 0xff00>,
+ <&raid_mbox 15 0x1 0xff00>;
+ };
- raid4: raid@4 {
- compatible = "brcm,iproc-sba-v2";
- mboxes = <&raid_mbox 16 0x1 0xff00>,
- <&raid_mbox 17 0x1 0xff00>,
- <&raid_mbox 18 0x1 0xff00>,
- <&raid_mbox 19 0x1 0xff00>;
- };
+ raid4: raid-4 {
+ compatible = "brcm,iproc-sba-v2";
+ mboxes = <&raid_mbox 16 0x1 0xff00>,
+ <&raid_mbox 17 0x1 0xff00>,
+ <&raid_mbox 18 0x1 0xff00>,
+ <&raid_mbox 19 0x1 0xff00>;
+ };
- raid5: raid@5 {
- compatible = "brcm,iproc-sba-v2";
- mboxes = <&raid_mbox 20 0x1 0xff00>,
- <&raid_mbox 21 0x1 0xff00>,
- <&raid_mbox 22 0x1 0xff00>,
- <&raid_mbox 23 0x1 0xff00>;
- };
+ raid5: raid-5 {
+ compatible = "brcm,iproc-sba-v2";
+ mboxes = <&raid_mbox 20 0x1 0xff00>,
+ <&raid_mbox 21 0x1 0xff00>,
+ <&raid_mbox 22 0x1 0xff00>,
+ <&raid_mbox 23 0x1 0xff00>;
+ };
- raid6: raid@6 {
- compatible = "brcm,iproc-sba-v2";
- mboxes = <&raid_mbox 24 0x1 0xff00>,
- <&raid_mbox 25 0x1 0xff00>,
- <&raid_mbox 26 0x1 0xff00>,
- <&raid_mbox 27 0x1 0xff00>;
- };
+ raid6: raid-6 {
+ compatible = "brcm,iproc-sba-v2";
+ mboxes = <&raid_mbox 24 0x1 0xff00>,
+ <&raid_mbox 25 0x1 0xff00>,
+ <&raid_mbox 26 0x1 0xff00>,
+ <&raid_mbox 27 0x1 0xff00>;
+ };
- raid7: raid@7 {
- compatible = "brcm,iproc-sba-v2";
- mboxes = <&raid_mbox 28 0x1 0xff00>,
- <&raid_mbox 29 0x1 0xff00>,
- <&raid_mbox 30 0x1 0xff00>,
- <&raid_mbox 31 0x1 0xff00>;
- };
+ raid7: raid-7 {
+ compatible = "brcm,iproc-sba-v2";
+ mboxes = <&raid_mbox 28 0x1 0xff00>,
+ <&raid_mbox 29 0x1 0xff00>,
+ <&raid_mbox 30 0x1 0xff00>,
+ <&raid_mbox 31 0x1 0xff00>;
};
--
2.51.0
next prev parent reply other threads:[~2026-01-07 2:10 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-07 2:09 [PATCH 00/13] dts: broadcom: Fix remaining DT warnings Rob Herring (Arm)
2026-01-07 2:09 ` [PATCH 01/13] ARM: dts: broadcom: bcm2711: Fix 'simple-bus' node names Rob Herring (Arm)
2026-01-08 17:32 ` Florian Fainelli
2026-01-07 2:09 ` [PATCH 02/13] ARM: dts: broadcom: bcm2835-rpi: Move non simple-bus nodes to root level Rob Herring (Arm)
2026-01-08 17:32 ` Florian Fainelli
[not found] ` <CGME20260109120137eucas1p221b9dd341c2319c0f9d0da1fbd48d1b3@eucas1p2.samsung.com>
2026-01-09 12:01 ` Marek Szyprowski
2026-01-12 18:09 ` Rob Herring
2026-01-16 21:49 ` Florian Fainelli
2026-01-07 2:09 ` [PATCH 03/13] arm64: dts: broadcom: bcm2712: " Rob Herring (Arm)
2026-01-08 17:33 ` Florian Fainelli
2026-01-16 21:49 ` Florian Fainelli
2026-01-07 2:09 ` [PATCH 04/13] arm64: dts: broadcom: Remove unused and undocumented nodes Rob Herring (Arm)
2026-01-08 17:33 ` Florian Fainelli
2026-01-07 2:09 ` [PATCH 05/13] arm64: dts: broadcom: stingray: Rework clock nodes Rob Herring (Arm)
2026-01-08 17:34 ` Florian Fainelli
2026-01-07 2:09 ` [PATCH 06/13] arm64: dts: broadcom: stingray: Fix 'simple-bus' node names Rob Herring (Arm)
2026-01-08 17:34 ` Florian Fainelli
2026-01-07 2:09 ` Rob Herring (Arm) [this message]
2026-01-08 17:34 ` [PATCH 07/13] arm64: dts: broadcom: stingray: Move raid nodes out of bus Florian Fainelli
2026-01-07 2:09 ` [PATCH 08/13] arm64: dts: broadcom: Use preferred node names Rob Herring (Arm)
2026-01-08 17:35 ` Florian Fainelli
2026-01-07 2:09 ` [PATCH 09/13] arm64: dts: broadcom: ns2-svk: Use non-deprecated at25 properties Rob Herring (Arm)
2026-01-08 17:35 ` Florian Fainelli
2026-01-07 2:09 ` [PATCH 10/13] arm64: dts: broadcom: northstar2: Rework clock nodes Rob Herring (Arm)
2026-01-08 17:36 ` Florian Fainelli
2026-01-07 2:09 ` [PATCH 11/13] arm64: dts: broadcom: northstar2: Drop unused and undocumented "brcm,pcie-ob-oarr-size" properties Rob Herring (Arm)
2026-01-08 17:36 ` Florian Fainelli
2026-01-07 2:09 ` [PATCH 12/13] arm64: dts: broadcom: northstar2: Drop QSPI "clock-names" Rob Herring (Arm)
2026-01-08 17:36 ` Florian Fainelli
2026-01-07 2:09 ` [PATCH 13/13] arm64: dts: broadcom: northstar2: Drop "arm,cci-400-pmu" fallback compatible Rob Herring (Arm)
2026-01-08 17:36 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260106-dt-dtbs-broadcom-fixes-v1-7-ba45874e4553@kernel.org \
--to=robh@kernel.org \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=florian.fainelli@broadcom.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=rjui@broadcom.com \
--cc=sbranden@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®